Logic board has an error code running A.H.T.

I ran AHT 2.0.1 on my MDD Dual 1.25 OS10.4.11
It said the logic board had an error code.
2PFW/2/3:Firewire
The test stopped.
I this serious?
What should I do?
Shamus

Firewire external DVD & HD work fine for me in 10.4.11. Never tried target disk mode.
Anyway, if AHT found an error with your firewire port, I'd say you have a hardware problem with the firewire port not a software problem.   If you have lived with it this long, you can live with it a while longer.
I guess the question it how do you skip the firewire hardware test???   I do not know. Anyone know?
Robert

Similar Messages

TS3694 my iphone 4 has a error code (3002 code). what exactly of it mean and what should i do to solve this problem? thanks you

hi everyone. my name is joseph, i got the problem on my iphone 4 16GB BLACK. first time i did damage the battery connector and i have some store fix it for me, thaey actually sodered it and right now the iphone is not chargeable. the only thing i can do it to plug directly in the with the cable charger in other for the phone to bea able to use, but when i disconnect the cable, the phone is power off completely. right now al i can do is to connect to the itunes and try to restore it and its shown that my iphone has an error code which is (3002). i dont know whats mean and how to fix it. can anyone give my some suggestion what i mean to do? thanks you for your read

Also I've tried to reset it and it still keeps doing the same thing

HT201210 My Ipod has an error code of 1604 when trying to restore. I have followed all recommended instructions...any ideas.??

My Ipod has an error code of 1604 when trying to restore. I have followed all recommended instructions...any ideas.??

If you did all of this
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I cant get the itunes store to work , it has a error code when I try to use it, any idea why?

I cannot get the itunes store to work, it has an error code when I try to use it, any ideas?

What error code number are you getting, rodeo?

HT201210 My ipod has received error code (9). I have tried to restore, but failed. Any idea how to restore back to original settings?

My ipod has received error code (9). I have tried to restore, but failed. Any idea how to restore back to original settings?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS3694#error9

When i try to burn my playlist it starts then stops and has a error code 4450

when i try to burn my playlist it starts the first song then stops and has a error code 4450

Hello Clubcon,
Thank you for the details of the issue you are experiencing when trying to burn a disc using iTunes. I recommend reviewing the following articles for steps to troubleshoot and resolve this issue:
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.

I cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

i cant make restore for my iphone 3gs??,,,, needs restore and itunes cant make restore has an error code 2003... How can I solve this problem?

See this support document for information about update and restore errors. Resolve iOS update and restore errors

Logic Board has failed 3 times...2011 MB Pro 15 Inch

So I have recently had a ton of issues with my MacBook and it is really starting to get annoying. I had my logic board replaced in March of this year. The repair cost me around $350 as the warranty was up. The logic board failed again at the end of August. I brought it back in to the apple store and they replaced the logic board again, but for free this time. I was extremely impressed with their customer service, they even replaced my display which had a small crack. Everything worked good as new until last night. Once again the same issues as before, so obviously they logic board has failed for a third time, which is a little ridiculous in my opinion. I will be taking it in to the apple store after work today to see what's going on.
Three logic boards in the span of half a year can't be normal...Is this a sign of some other issue? Is it time to ditch this POS and get a PC? Could it be something I'm doing on my end? I rely heavily on my laptop for work and need something that consistently works. Apple's customer service has been top notch through all of this, however the actual product has not been. I would love to hear other's opinions/experiences with similar issues.
Thanks!

Perhaps - and I mean PERHAPS - you'll be offered a replacement unit this time around: it all depends on how the manager is feeling that day. A number of 2011 models have had three logic board replacements and USUALLY the fourth time around, folks are offered a new replacement unit.
Don't count on it but if it comes down to pleading with a manager, DO IT!
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

I have a Mac book pro, 15" that I bought 4 years a go, the logic board has died, what recoarse do I have with Apple regarding a product that should last years

I have a 15" Macbook that I bought in late 2007, which is just 4 years old Since then the battery wont hold a descent charge, the screen had to be changed and now the logic board has died. plus there is an issue with the video card for that same model. I would expect a product that carries the Apple brand to last longer. They are not cheap to buy and its some thing that I cant afford to replace every few years. Does any body think that Apple has an obligation to do the right thing or am I expecting too much.

Four years is a pretty typical lifespan for a battery (and for a computer in general).
Does any body think that Apple has an obligation to do the right thing or am I expecting too much.
You are expecting too much.

My cannon printer Pixma Mx439 has an error code of 5100

My cannon printer Pixma Mx439 has an error code of 5100. I had a paper jam and cleared it, I took out the ink and replaced it, I have no idea of what else to do at this point. Are you able to suggest anything else. My printer is less than a year old, I should have a warranty.
Julie

Hi julieannbean,
Cleaning the timing encoder film of the printer may resolve the issue you are experiencing. To do this, please follow the steps located at the link below:
Cleaning the Timing Encoder Film
If you still experience the same issue after cleaning the timing encoder film, the printer will require servicing.
Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

It has an error when run a program in background job

Dear Expert,
we have a program
when run it in background,it has a error "Error during import of clipboard contents" but when run it normally(run in front workbench se38 or run the t-code),everything is ok.i've used typingJDBG in the command box to debuge the background job,there has no error.
whould you like to tell me what had happen? thanks a lot!
addition: the program used a function ALSM_EXCEL_TO_INTERNAL_TABLE
Thanks & Regards,
Kerry
Edited by: Kerry Wang on Aug 24, 2009 2:12 PM
Edited by: Kerry Wang on Aug 24, 2009 2:14 PM
Edited by: Kerry Wang on Aug 24, 2009 2:14 PM

Hi,
You cannot use FMs to get data directly from the presentation server when program is executed in the backgroud.
Check the thread : GUI_DOWNLOAD
Regards,
Himanshu

My imac8,1 has an error code of 4HDD/11/40000004:SATA(0,0) what does this mean and where or how can i get this fixed?

I need my computer although it is old i bought it in 2008, i just can not afford a new computer. Could someone possibly tell me the meaning of my error code?

The error shows a problem with the hard drive, and as it says SATA, it may be related to the SATA connector of the hard drive or the logic board. I recommend you to take it to an Apple Store or reseller to get it diagnosed, so you will know what the problem is and they will provide you a solution. If the problem is in the logic board, this may be an expensive repair

I think my Logic Board has gone POOF!

For anyone who saw my post last week about upgrades to my Digital Audio Power Mac G4, it's now taken a turn for the worse...
A few days ago, after booting my OS 9 HD, i found that i couldn't get any audio from it. The machine would chime on startup but would not make any noise afterwards. Changing the volume, trying the Alert Sounds, selecting Outputs, nothing would make sound...
At first i thought it was a problem with the drive so i backed up everything of import (mostly old games) and wiped/reinstalled OS 9 on the drive. Since then ive not been able to boot the OS 9 drive. Its recognised on the OS X drive as a bootable disk but whenever i try to boot it, it just goes back to booting the OS X drive.
Then this morning, i thought id try the Apple Hardware Test disc that came with the G4 software. After running that it stopped half way through saying there was a problem with the Logic Board . Firstly i tried putting another processor in (i recently swapped out my Sonnet Encore ST 1GHz for a Encore ST 1.4 GHz, the 1GHz came with its own fan and heatsink where the 1.4GHz relies on using the heatsink of the standard processor. I was concerned that the processor might have overheated and cause some big problem!) But that made no difference. After a few attempts at it the computer now will not boot at all. Power goes to it (the main fan starts up, the CPU fan attached to the heatsink starts up, and the red light on the Logic Board comes on) but it won't chime or do anything else, the Hardware Test disc is still in the optical drive too!
The only thing i can think of at this stage is the Logic Board since the problems have gradually gotten worse, starting with lack of audio then progressing to not working at all...
Anyone got any knowledge or thoughts that might help me?
Cheers!

it is a bit, but i cant say anything more than what AHT tells me...
the original code was something like ERROR_CODE>>>>>>>ERROR_CODE>>>>scc_/3/7 or something like that, it didn't really make it clear...
BUT i ran the test yesturday on the system and it now seems to have sorted itself out. I ran the extended test twice and both times it said there was nothing wrong with the system! Very Odd!
So that problem seems to be sorted, but the OS 9 one remains...
I gave it another go yesturday too with the install. I checked the drive by trying to boot the OS X Tiger retail disc that i have, that booted up fine, so its clearly not the optical drives that are the problem. The computer just wont boot the OS 9 disc. I tried the disc in a few other machines (a Beige PM G3, a PowerBook G3 and an iBook G3) all of these machines can boot from the disc, so i dont see how it could be the disc either.
I also discovered that DA Power Macs are only compatible with 9.2.1 or higher, so i initially thought "ahh that might be why its not working, the version of 9 ive got on the HD is 9.0.4!" so i ran the rest of the updates to bring it up to 9.2.2. Alas it didn't make a shred of difference . Ive tried re-blessing the System Folder, unplugging the OS X drive so the OS 9 one is the only visible drive. Each time i do it just loads up with the smiley folder/question mark icon that normally means it cant find a System Folder...
What im trying now is running a full install/update to 9.2.2 on the Beige G3 and, if that works, swap the drives around to see if itll boot that HD.
Its all OS 9 problems from hereonin it seems...

Logic Pro 8 & TDM Error Codes, need help!

I am using Logic Pro 8 & TDM hardware. I am getting 2 error codes, only when I try to use the Audio Suite in the Sample Editor.
"Error code -7401 was returned by the DAE driver."
"2 times TDM error -7102 while trying to disconnect TDM."
What do these mean? I tried searching the net and found nothing useful. Otherwise Logic Pro 8 and TDM has been flawless, and all my hardware works perfectly in Pro Tools HD.
I am using a 96i I/O, and 1 Accel Core card and 2 HD Accel cards (PCIe).
Also the Audio Suite doesn't seem to process the audio as intended or at all. There 2 errors show up when I try to preview the effect, no matter what Audio Suite buffer size I use.
Thank you in advance for any info.

I've been trying to get Logic to work with DAE/TDM in Leopard on a Mac Pro now for months! How did you do it?? Been searching the internet for answers ever since I started, and would highly appreciate your response.
My most obvious problems are: No audio from Aux (EXS, ESB) or instruments. The whole program is "struggling" with awful "framerates" . . just moving the pointer takes forever.
When in Core-audio everything works fine.
I have reinstalled Leopard, Pro Tools and Logic several times, with no luck.
Please tell me how you did it!
Thx in advance!!
/K

Logic 8 and TDM Error codes

Hi everyone,
I installed Logic 8 yesterday (when I still was happy in anticipation) and also uggraded to PT 7.31 (Mac G5, 2 x 2.7 GHz, 4.5 GHz Ram, Mac OS 10.4.10, ProTools HD).
On every Logic 8 startup I get a different 5-digit (?) DAE Error code, none of which I could find in Digidesigns database. The song I load up has several Kompakt, VSL-VI, FM8, Stylus RMX instances and played back alright on Logic 7. It does play in L8 when I click away the DAE error code message but soon complains about TDM overload.
I deinstalled ProTools and loaded the standalone DigiCoreManager for use of the PT hardware without PT software installed, but no luck. The DAE error code changed from 5- to 4-digit (does it mean the problem is getting smaller? :-))
So I reinstalled ProTools, which seems to work (I hardly ever use it, but it plays audio files alright), but L8 does the same things all over (once the error code even changed to 3 digit, yippieee).
Worst of all, Logic 7 crashes right after startup complaining about too little memory allocated to the DAE and not being able to find ESB TDM.
I'm at the end of my wits now. Apart from removing and reinstalling L8 (unfortunately I can't find an uninstaller) I can't think of anything else. Anybody any ideas?
Thanx,
jayleajay

had the same problem. was fiddling around with templates, loaded tdm prod. template and got tdm errors -7xxx. i guessed, that it´s the "old" digi eq II, but did not try it out because of client coming in for session. if you find out, please let me know. can you check that, if you have "old" tdms in your plug-in folder? maybe the template draws on old digi plugs.....

Logic board has an error code running A.H.T.

Similar Messages

Maybe you are looking for