Logic bus output oddity.. Is my song corrupted or??

Ok so Im working on some remixes of my bands first lp..
This particular song Im working on, everythings great balance wise, but I wanna keep it so my peaks are around -3db..
Grabbed all my faders and dropped em accordingly, but noticed something odd with my tom tracks still being too loud..
I have 7 drum tracks, kick, snare, 3 toms, 2 overheads.. All of the drums, EXCEPT the toms are routed to a bus.
The toms go to their own bus for compression reasons, and that bus is then routed back into the bus the rest of the drums are going into.
So while I was trying to tame the toms, I muted the bus they are routed into..
I can still hear the toms hitting the main drum bus like they were going straight to that.
NOWHERE can I see anything odd in the mixer as far as routing.. All the rest of the drums go to Bus 1/Aux 1, while the toms get sent to Bus 7 (which feeds Aux 7) and the output of the Aux is set to Bus 1. I do have all the actual drum tracks using a Send to the reverb bus, but this isnt the reverb acting up..
If I mute Bus 7, those toms are still coming out loud and clear in Bus 1 only without the compressor thats inserted on Bus 7..
So what gives?? Did I miss something that might still be sending those toms to bus 1 first or does this sound like my actual song file has some corruption or some problems going on??
I still have the song open right now, and just for kicks went back in, soloed the drum bus. I put the three tom tracks outputs back to Bus 7, and that Aux channel actually has NOTHING set to input or output at the moment so those toms should be going nowhere out into space. But nope there they are clear as ever coming out of the drum bus still..
Oh yeah Im still on Pro 9.1.8 too since Im on a Mac Pro 1,1.. Running 10.7.5 but not sure that matters hehe..

OK so which Software Instrument do you use for your drums? Can you please put up a screenshot of your mixer with all the relevant auxes and tracks in frame?

Similar Messages

  • Logic can output video to Firewire, any chance we can convert to DVI?

    Logic can output video to Firewire, any chance we can convert tbe video data in firewire to DVI and connect to a display?
    Thanks!

    DV-Video to DVI Converter

  • Logic for Output type determination of shipment

    Hi All,
    I have a requirement where in when a shipment is being saved (on create/change) i need to put a logic in an enhancement to identify if a particular set of output types will be generated or not for that shipment.
    Any info on how i can do this? Is there any FM that can fetch that data.
    Thanks.
    Ashiq Ali

    T. Code  VOFM
    Requirements > Output control
    Check routine 605
    Chek this where you can find some logic for Output type detremination of shipment type
    ~P

  • My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram

    My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram.  Can be any song, any time, same song will play if I select it again.  Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • Logic live outputs pops intermittently?

    Using Logic Pro in a live setting in church concerts, I'm getting random pops in my main FOH output, and I cannot pinpoint the reason, unless I am just taxing my laptop's capacity. Anyone else with experience on a G4 over-taxing the CPU and getting pops or clicks?
    Here's the problem:
    Maybe half a dozen times during the 2 hour concert, I will hear a minor pop in the FOH output, usually during music. Sometimes it happens just after I slightly change the EQ on the main output, sometimes it happens when I haven't touched the computer for 30 seconds or so. It appears to be almost random.
    Here's my setup:
    Using Logic with iBook G4 (1GB RAM) and MOTU Ultralite Firewire audio mixer doing live, single mic gospel concerts. Using iTunes to playback .aif stereo tracks, and using Shure wireless mic and wireless IEM monitors. Pretty simple setup, 1 mic, 1 stereo feed from iTunes (going out to MOTU Output 7-8, then analog patch cords to MOTU Input 7-8). Two stereo outputs, FOH and IEM. Using Aux objects as inputs, buses to get to SpaceDesigner reverb and IEM output mix. Doing some EQing on mic, IEM and FOH output, plus compression on mic. Using 128 cache to keep latency unnoticeable.
    Using the System Performance window, it is using just over 1/2 of the CPU capacity. If I turn Space Designer off, I am using an 1/8 of the CPU. I am not recording, nor moving the timeline at all. I use iTunes instead of laying the tracks end to end in the Arrange window so that I can freely choose between over 50 songs at the whim of the singer. And, it sounds great, and easier to carry than the 01V I was flying with.
    Of course, I have no other apps running other than iTunes and Logic Pro and Stickies. But, the CPU capacity monitor being over 1/2 makes me nervous.
    Based on the answers to this query, I am considering getting a MacBook Pro for the increased CPU, as well as bigger screen. But, if it doesn't solve the pops, I will have spent $3,000 for naught.
    Thanks in advance for any help you can offer.
    Rod-mixing live on a trackpad

    Here's the problem:
    Maybe half a dozen times during the 2 hour concert, I
    will hear a minor pop in the FOH output, usually
    during music. Sometimes it happens just after I
    slightly change the EQ on the main output, sometimes
    it happens when I haven't touched the computer for 30
    seconds or so. It appears to be almost random.
    Couple of questions....
    Do you get the pops with Space Designer off?
    SD has to process a lot of info and traditionally, laptops
    don't have as efficient a bus system. If not using Space Designer clears up your problem then you pretty much know that the ibook's bus system just can't handle it.
    But first!! try another player than ITunes. ITunes is not the most efficient file player around.
    Also, if you do have to use another reverb, try using a couple of Logic's verbs, say a Platinum and a Gold. Sometimes using two lesser quality reverbs at lower settings can produce wonderful results.
    paNceNter

  • Weird Bus Output.

    Hey everybody!
    I am troubleshooting for my university's music tech lab, and when we open songs that we started in Garage Band, or open Logic projects that were started on computers outside my university's computer lab, Logic assigns the audio output of the tracks to "Bus 21-22" instead of "Main Outputs 1-2." The result is there is no sound, and we need to manually go into each track of the piece and reassign the audio output. This is, of course, bizarre behavior that none of us experience with Logic when using it outside of the Music Tech Lab.
    I tried trashing the prefs, but to no avail. Any thoughts?
    Thanks so much!
    Blaine

    I'm sorry, this feels a little inappropriate, but I have to ask you what school you go to. Music tech is a subject I am very interested in and I just applied to UVM. It would be awesome if you were a student at UVM and could tell me more about the program there (or at whatever university you are at). My email is [email protected] I'm sorry for not answering your question.

  • Logic 8 output - mono/stereo

    For those who uses Logic with external mixer: is it possible to assign track output as MONO? That was not possible in LAP7.
    thanks

    Me too. - How can you create headphone mixes with only stereo assigns - I can make mono output channels easily enough, 1, 2, ect, but when I try to assign any channel or bus to an output, I'm presented with only 'stereo 1-2, stereo 3-4'.
    Using 8 of my hardware outputs for 4 headphone mixes is lame. Any ideas?
    (no pan option in sends yet.)

  • Logic Crashes when I open old songs

    So I've been doing all my productions on a Mac G5 using Logic Express 7.1. I just bought a Mac Book Pro and updated to Logic Express 7.2.3. All the songs I did on the other Mac won't open.. Logic immediately crashes as soon as I try to launch...

    Logic crashes when I open a particular file...
    As the old joke goes...
    "Well, don't open it then..."
    The first things to do is make some backups of what you have, just in case. Then try booting Logic without the audio drivers (or turn them off) and see if you can load the song.
    Also, try deactivating your third-party plugs (a snap with AUManager, or move them temporarily out of your components folder), and seeing whether it will load then.
    I would guess that the song is corrupted, so once you can get it to load, I would suggest you start copying all the necessary stuff (regions, automation, channel settings etc etc) into a new, uncorrupted song.
    Also, you can try and go back through your auto-numbered backup files, assuming you have the function turned on - you might be able to open a version of the song before the corruption. And if you didn't have that autobackup feature turned on - well, I suggest you do from now on!
    If you get no joy doing all that, post back and we'll go from there.

  • Download of music keeps saying error 10000, song corrupted but I already had this song on my iphone.  Accidently took it off when i syncd new itunes onto my iphone and wiped out my iphone music organization etc.

    Hi community,
    I recently lost the computer i had my itunes on.  I also recently got an iphone. Everything was perfect and set up but then I had to create a new itunes account on my Dell desktop.  Anyway, when i created the account and connected my iphone i told me something about my iphone only having what was on my itunes on the computer.  I thought that was fine because all of my music is my purchases.  But i turns out that a whole chunk of my music wasn't there and my playlists got screwed up.  Playlists fine but I went to download the music and every single one of 33 songs says, Cannot download file corrupted, error 10000. Is this a problem with my computer?  These files were fine before i connected my iphone to this computer and itunes setup on it.   And I have them on my iphone but can't figure out how to move them from recently added to a playlist for running etc.  Thank you! 

    so i went ahead and did a restore from the new PC and then a restore from backup.  looks like that fixed everything... a few playlists were messed up and so far as i can tell, maybe just a few minor issues.

  • How to change email/fax number retrieval logic for output...

    Hi,
    In my requirement, for sending the output by fax / email, for e.g. take certificate of analysis, the customer master data is checked and the data mentioned there is used to send the output. In addition, in customer master transaction XD01/XD02 I see an additional tab called contact person which has information of each contact person along with their department numbers and fax num and email ids.
    In ADR3 I noticed that these are stored.
    In short
    In XD03,  under address tab a fax num maintained which I do not want to use. Rather,
    Under contact person tab , the entry which has dept number as say A100, the associated fax num is the one to which I want the COA to be sent.
    Where exactly is the code that reads these entries and determines the fax number and email ids to which the output needs to be sent ? May be there I need to change the logic to include a check such that entries that have dept as A100 will be checked and those fax and email ids will be selected and set.
    Or if there is any other way this can be achieved, pl advise.
    thnks

    Senthil,
    The COA trigerring works fine. The delivery for  which PGI will be done and then COA will be sent that has the output configured such that Fax will be sent. In SOST I can see the entry which shows the fax num as say 787878.
    But this was the number found in the ADDRESS tab in XD03 for that ship to partner. I do not want that fax num to be used. I want the fax number that I enter in an additional tab and which is stored in KNVK and ADR3 tables.
    So once SAP determines it has to fax the COA , SAP shoud be reading the ship to pary fax num, right ? Where is that code in standard SAP ? Bcos I need to change the logic to read somwhere else !! Hope you are able to follow me now ?
    thnks

  • PDF output file from Image Capture corrupted

    This problem occurs only when scanning multiple page documents into image capture, the lower 1/4 of the first 2 pages are unreadable blurs. The page shows up ok in the Image capture preview window, but the PDF output is corrupted. The printer is a Brother MFC-7820N, I am scanning 150 dpi grayscale, US letter, no image correction, to PDF. The problem occurs with both of my computers, Quad G5 10.5.8, and a MacBook 10.5.8, this has happened since I purchased the printer, I was running 10.4 at the time. I have just scanned 1 page at a time with no problem, but now I have a large amount of documents to scan and I get the corrupt files. If anyone has seen this and found a solution, I would appreciate any suggestions.

    Ah perfect, you made me aware of a feature kink I didn’t know about! When you import stuff using Image Capture, it goes into /private/tmp/Image Capture_Import.(string of numbers and letters).
    You can navigate there by going to the Finder, hitting Command-Shift-G, and typing in /private/tmp—if the folder still exists, as it usually does for some time, sometimes even until the next restart or so—you can see the folders which should include one or more of thoe Image Capture_Import.something folders and find your files.
    Incidentally, if you want to find a “system” file, i.e., one that’s in a location normally hidden by the Finder, you can:
    1. Open up a new Spotlight/Find window in the Finder, and start searching by name.
    2. Next to where it says Search: This Mac… etc. there’s a + button. Click that, then
    3. From the dropdown menu choose Other… and look in the list for “System files” and check the “In Menu” checkbox for it.
    4. Hit OK.
    5. Choose “System Files” which is now in the dropdown, choose “are included” from the next dropdown.
    Be careful what you do with files you find using this method. It will show everything, including files essential to running your Mac properly, so unless you know exactly what you’re doing, don’t just start dragging files off this window onto your Desktop or anything, try to copy them instead by option-dragging (holding down the option key while dragging)—that way, you’re only making copies, not moving a file from where it’s supposed to be, and your Mac can find it.
    Hope this helps! If you can’t find your files this way, there are other programs which can undelete and perform other operations to recover data… this happens to everyone, no matter how long you’ve been a user.

  • Difference between logical destination & output devise in Purchase message

    Hi all,
    I defined a printer determination per printer for a condition type used in the ME22N transaction via OMJR or NACE : printer A
    I defined a another outputdevice in the SU01 transaction : printer B
    When I print condition type in ME22N, the logical destination from the communication method displayed is printer A.
    But when I open the SP01 transacation, the output devise is printer B.
    Why logical destination from ME22N and output devise from SP01 are different ?
    How can I make sure logical destination defined in OMJR or NACE will be used in SP01 ?
    Thank you
    Pierre

    Thank you,
    basically we had to change smartform, the code said il has to be printed in logical destination defined in SP01.
    So, we changed it and now MN04, MASS, OMJR transactions works.
    Pierre

  • Logic Analyzer output of 7445N BCD-to-Dec​imal

    Hello All,
    I am testing the output of a 7445N BCD-to-Decimal decoder with the use of Multisim 10 word generator and the logic analyzer.  I have the inputs of the 7445N connected to the word generator counting up from 0 to 9 binary.  The first four inputs of the logic analyzer are connected to the inputs of the 7445N as well.  I can see the correct pattern of binary number being generated by the word generator at the logic analyzer. However, the logic analyzer connections to the output of the 7445N shows flat lines.  I don't see the binary numbers generated.  I connected logic probes to the output of the 7445N, and a binary pattern is shown.  If I connect a single line from the logic analyzer to the output of the 7445N, then I can see the logic low and high for that particular pin.  But again, if I connect more than one line from the logic analyzer to the 7445N, it goes back to a flat line.  Has anyone seen this before?  Is there a specific method to test this particular IC output with the logic analyzer?   Any help would be greatly appreciated!
    Thanks,
    Arnie

    I will do you even better. I will post the complete MS10 file for you to look at. All the settings of the simulator are defaulted. I thought I would let you know that so you wouldn't think I fiddled with the settings to make it work.
    Here it is and I hope this helps:
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day
    Attachments:
    7445N Test Circuit.ms10 ‏197 KB

  • Purchased songs corrupted

    This is a new one for me. Somehow all my purchased tunes have gotten corrupted. The artwork has erased and encoded with shows a square. The good news is that the songs still play.
    Here's a link to a screen shot I took of one of the corrupted files in iTunes. http://i1.tinypic.com/n4fk1k.jpg See the boxes next to Encoded, the artwork area on the top left is really hosed. Also,it erased the Artwork completely. The Artwork tab also shows signs of a corrupt file. Too weird.
    Ran a virus scan and it found some virii, didnt fix the problem though. Also ran an adscan, no fix. I had a backup of nearly all my tunes but of course I lost the playcounts, ratings, etc. when I had to re-import them back in to iTunes, no biggie. I'm just wondering what could've caused this.

    anyone?

  • Rtsi bus output on GPCTR0

    I try to observe a trigger signal which comes from the RTSI bus with an GCPTR0 output (on a card PXI 6713).
    I use the following function:
    Select_Signal(idevice,ND_GPCTR0_OUTPUT,ND_RTSI_0,
    ND_LOW_TO_HIGH).
    Nothing happens. I don't understand.

    Babat,
    How are you monitoring the GPCTR0_OUTPUT pin? If you are using a scope, you need to be certain that you are sampling fast enough. Most of the trigger signals have pulse widths in the 25 to 50 ns range. To verify the present of the trigger signal on the RTSI line, you may want to route it to the SOURCE of the counter and perform event counting.
    Good luck with your application.
    Spencer S.

Maybe you are looking for