Logic can output video to Firewire, any chance we can convert to DVI?
Logic can output video to Firewire, any chance we can convert tbe video data in firewire to DVI and connect to a display?
Thanks!
DV-Video to DVI Converter
Similar Messages
-
Can't output video to Firewire via Canopus..
Hi all,
All of a sudden today, I am not able to output video via Firewire to my Canopus ADVC-110 with Final Cut Pro 6. I do however have video output when using programs like Logic, so the Canopus appears to be working fine. I checked the Audio/Video settings in FCP and have Firewire as Video playback, but no output is going to my monitor. What settings do I need to be looking at, in FCP. It's clearly something I did, and would like to correct it, so I can monitor video again. Please advise.
Also...one other note, I can't seem to playback video through Firewire in Soundtrack Pro as well. But Logic Pro plays vide through the firewire device just fine. Anyone have any insite on this? Thanx in advance....Make sure the light is in the DV mode...press the big button a couple times to make sure. Also make sure you didn't switch to PAL mode from NTSC or something. AND...
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane -
I recently had to create a new profile, and thought I had backed up my bookmarks. They are now gone and I have not been able to restore them. ANy chance they can be recovered? Thanks!
It is possible that you forgot to add a file extension (.json) while saving and in that case you may be looking for the wrong file.
Also make sure that you search for hidden files and folder in case the file was saved in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
Firefox won't import the file without a .json file extension ("Can't process ..."), but you can create a backup with any name. -
My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?
Is this an older "round" version of the AirPort Extreme? If yes, it is true that AirPort Utility 6.x no longer supports the older AirPort Extreme and AirPort Express models.
A model number......located on the bottom of the Extreme or on the side of the Express would be helpful to confirm what you have.
Apple probably does want you to buy a new AirPort Extreme.
The workaround might be to use a Mac or PC running a 5.x version of AirPort Utility.
A more complicated workaround would be to install AirPort Utility 5.6 on Mountain Lion. This is not supported by Apple......it does work for me.....but may not work for you. See this article for more details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html -
If i just preordered my IPhone 5 today (9/17), is there any chance i can recieve it before Oct 10th-Oct 15th, like it says on my order status?. I am really hoping that somehow, i will get my iphone earlier than the email suggested.
Ah dangit, well i guess its 3 weeks of trying to distract myself then
-
Any chance I can get my e71 display Chinese?
I just got my e71 and its great. However I also view a lof of files in Chinese. Any chance I can get it to display Chinese characters instead of some weird squres? Thanks.
Hi roywang25,
Welcome to the Nokia forum.
If your E71 doesn’t have Chinese installed, you’ll need to get a language pack land including Chinese.
There are 2 options that can be done by a Nokia Care Points:
1. Installation of the language pack (this application will erase if hard reset)
2. Flash of the phone with the language version (this will be permanent)
Please contact your local Nokia care point :
http://europe.nokia.com/find-a-store
Let me know how you get on so that I can troubleshoot further, if necessary.
regards,
Manududu3
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you! -
I am trying to authorise a new computer. Apple's instructions are to select "Authorise this computer" from the itunes store menu. I can't find this in any menu. Can you please help? How do I authorise my computer?
Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us. -
I am running Safari on my mac. I also am using Hotmail. Whenever I click on a URL someone has sent me it won't do anything. Its blue like I can click it but I just can't. Is there any settings I can change or check? Thanks
Maybe you copied the icon show in the window to your application and into your dock directly. Try closing your Firefox again. Eject the disc again. Then go to your application folder. You should see Firefox with a circle and cross through it. Open it. It should open without the blue icon appearing on your desktop again.
-
Edit and output video without modifying any pixels?
That subject line sounds cryptic, I'm sure, but I need to assemble numerous snippets of animated pixel art into what should become a somewhat lengthy animation. Final Cut should perform no internal resizing and no compression prior to output; all input files are 240x160 without exception. Stills are PNG to take advantage of the Alpha channel, but the animated clips are uncompressed QuickTime with a single, unique RGB value reserved for the background for chroma-keying (all layering is to be all-or-nothing with regard to the Alpha/keying; there is no partial transparency at play).
All I need is to compile these clips together, layer a few elements on top of each other, and tweak the timing here and there. Beyond that, Final Cut should leave everything exactly like it found it, down to the pixel. (I'll worry about the output format and compression later.)
Is this possible (and easy) in Final Cut Express? In my disastrous trials with Adobe Premiere Elements (v.1), Premiere insisted on internally resizing the clips for editing, which fuzzed up the images and defeated the chroma keying (as if the fuzziness wasn't bothersome enough). It's possible this was due to user error, but as far as I can tell, nothing can prevent Premiere from reprocessing everything into its native DV dimensions, which is quite destructive toward pixel art. Anyway, I'm frustrated enough with Premiere that I'm willing to purchase Final Cut, if it can meet these requirements easily.
Thanks much for any information you can provide. Oh, and if Final Cut could possibly output the entire sequence as an animated GIF, that'd be fantastic, but I tend to think it'd be a little too heavy-handed (even though my total palette is well below 256 colors) because it's used to crunching fancy true-color videos instead of this basic pixel art.After some further research, it seems my best approach for this project will be to compose my small QuickTime clips with all layering done beforehand, then assemble them with a utility such as QuickTime Pro or MPEG Streamclip, as discussed here:
http://discussions.apple.com/thread.jspa?messageID=7813920�
MPEG Streamclip, in fact, seems to work quite well in my initial tests. If the clips are numbered sequentially, dropping them into the application assembles them beautifully. And it's free!
Thanks again to those who replied. -
Any chance I can use PC3200 (ECC) from my PC in my iMac?
I write 'my iMac' with faith, as I don't have one yet, but I'm getting closer and closer to pulling the trigger (and selling my powerbook to finance it). You see, I'm basically poor. I've got an open tab in this very browser for a 2gb kit of Corsair Value Select ($217). I've also considered a single gig stick (bringing me up to an unmatched 1.5gb). Then I had a crazy notion:
"My PC, which I hardly use any more due to the gruesome inferiority of XP to OS X, has 2x512mb PC3200 sticks in it... XP doesn't know what to do with anything more than 512!"
They are both ECC sticks, but my understanding is that ECC can work in non-ECC setups, but not vice versa. If you mobo requires ECC, you need ECC, but the ECC functionality can be not used and it'll work like non-ecc memory. Sorry if that wasn't clear, but I'm pretty sure my current mobo doesn't acknowledge or use ECC, yet my ECC ram is running fine. ECC stands for Error Correcting SOMETHING, btw. Servers often use it, runs a bit slower but more stably than non-ECC. Anyway, I've got two chips, a samsung and a crucial chip, and I'm hoping that IF they'll work at all, that one of them would 'match' whatever 512 chip Apple sends stock. Then I can get by with the iMac running on 1gb.
Am I a crazy cheap-skate? The other thing I considered slyly was 'Why not buy that 2gb kit and stick the spare 512 in the PC - then I can run BitTorrent, Google Earth AND a game at the same time on 1.5gb and stave off upgrading to an Intel iMac for another 6 months (ie. 2008?) because I also have 2gb in my iMac.'
Thanks for your input.
Alex
p.s. if anyone knows if the spanning hack has any chance to output to DVI, please let me know - or look at my other post - thanks.Alex,
Apple says:
"Important: DIMMs with any of the following features are not supported in the computer: registers or buffers, PLLs, ECC, parity, or EDO RAM."
However, my understanding of the language "not supported" is that they might work, anyway, but if something goes wrong it's not Apple's fault.
With as many iMacs as are in use, there must be someone else who has tried ECC chips, if they are willing to own up to it:-) -
I have a projector and I was looking for an app that would allow output video all the time
The one you are looking at I believe is an older model and does not have very good reviews for working with an AppleTV2 / iPad 2 setup.
Here is the one that has worked for our district:
http://www.amazon.com/ViewHD-Component-Converter-Support-Surround/dp/B004F9XVBC/ ref=pd_cp_e_2
I can't say if the one you are referring two works or not, however I can say that based on the reviews, it looks like you may run into problems with the $45 version. -
Any chance I can recover the photos and other things on iPad after installing iOS7
After installing iOS7, my photos, all apps/games had gone. I can see the photos from a data recovery programme but couldn't recover them. Any chance that I can restore the previous version and recover all the data?
I didn't back up as I have changed laptop recently too, so the last back up time was long time ago.I updated on iPad. As I had new laptop, so I didn't back up anything on the new laptop, the old one was long time ago, so photos taken recenlty had all gone. I can see the photos from a data recovery programme (trial) but is there any way to recover them without buying the programme?
-
Ever since i got ios 6 it has been a slower and it says i only have 2 gb left when i have10 app and 0 songs. I got this iPod a few years ago so the warranty has already expired. Please if there is any way I can upgrade let me know.
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. Sometimes when you update and do other things files will be corrupted and make the "other" category large. Restoring from backup usually reduce the other .
- Restore to factory settings/new iPod. -
So, I just went into my iPhone notes (iPhone 4 iOS 7.0.4), and found that all my notes had been deleted. I did recdently change the mail account I was using, could that be the issue? I'm very worried as I had some bank details and other personal information stored in these notes. Is there any way I can select a specific stored backup to restore from?
Well, in iTunes, if you had not changed to sync notes to Outlook, that would answer that question. I sync my notes to my Outlook and have never had an issue. The only thing you need to watch is your archive setting. If you have notes set to archive after a certain amount of time, you will find that after non-use on the iPhone, they can seem to disappear. They will just not sync back, but are kept in the archive of Outlook. They are never deleted unless you actually delete them.
I'm glad you were about to find your notes. -
The iPad touch screen suddenly stopped working. It's been fine, but stopped all of a sudden. Couldn't reboot since pressing the hibernate button also asked for a "swipe" but couldn't swipe since the screen isn;t sensing any touching. can't scroll main screen appas. Can't connect to iTunes, says not connected. Next stop Apple store unless someone has an idea.
Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
Itunes renamed filename as tracks?
Apple itunes cannot use filename to import songs, it uses tracks instead? The field <file name>, for all my mp3 is apparently NOT used by iTunes, for sorting. As a conclusion my library is totally messed up. I need some help... Here the details: I ha
-
If i break my screen on my ipod touch is it covered under warranty
if i break my screen on my ipod touch is it covered under warranty
-
Wired Mac on Airport Extreme slowing down Wireless network?
I have an Airport Extreme 802.11n and a MacBook Pro 15" (unibody). I recently added a MacMini Core 2 duo as an iTunes server, and since it didn't have 802.11n (it's an older one), I shut off the WiFi and ethernet cable'd it to my Airport Extreme. It
-
EAS 11.1.2 - Java 1.6 - Administration Server tab doesn't appear.
Hello, I am running EAS 11.1.2 on Windows Server 2008 Standard SP2 64bit and Java 1.6.0_20. After signing into EAS I open File > Open and try to click on the Administration Server tab but nothing appears. The other 2 tabs, File System and Essbase Ser
-
Am I missing a trick in Finder? I have it set to the "three panels" where sub folders are displayed. If I have file in Panel A (leftmost) and I want to drag and drop it into a sub-folder or a folder in Panel A, how do I do it ?!! I can see the sub-fo