Logic changing the names of audio files when I drag and drop into arrange

i am dropping some 44.1/24 bit files into logic and for some reason out of nowhere the names of the files are changed. it removes digits i have entered in the file for identification purposes, so i am no longer sure what they are, and seems to be replacing it with "#". could it have something to do with import settings? i have not changed any...

This happens because until recently Logic didn't handle long filenames very well.
Long filename support was added in Logic 9.1.x so I recommend upgrading to that version - or using shorter file/pathnames.
The #7875 bit appended to the name is the number of the disk block the file is stored at...

Similar Messages

Wanted to put a file via a drag and drop into applications on my finder sidebar. it missed and landed in the sidebar itself. i can not remove it. i can not even highlight it. how can i remove it from the sidebar.

I wanted to put a file via a drag and drop into applications on my finder sidebar. it missed and landed in the sidebar itself. i can not remove it. i can not even highlight it. how can i remove it from the sidebar.

Try holding down the Command key and dragging the file well off the sidebar.
Hope this helps.

Can I make layers default to the top when I drag and drop into a new folder?

Can I make layers default to the top when I drag and drop into a new layer folder instead of the bottom? It annoys me that they always go to the bottom and I inevitably always need them at the top.
Thanks

Hi there
ok so PS CS6 if I grab a layer in Group A (yes layer sets sorry) and drop it into Group B, itll put it under anything thats already in Group B, which annoys me! Is there a way of telling PS to default anything dragged from one group to another to default the newly added layers to the top

Change the name of a file.

Hello, I don't how can I change the name of a file ?.
Somebody can help me, please?
For example : c:\out\prove1.csv to c:\out\prove1_09112007_163001.csv
Thanks

Another way would be to use the FILE_COPY and
FILE_DELETE of the class CL_GUI_FRONTEND_SERVICES to first copy the file and then delete the other one.
REgards,
Rich Heilman

BEx Brodcaster for Workbook - Cannot change the name of attachment file.

Dear All Experts,
I am using the BEx Broadcaster to distribute report of workbook via email. The name of attchament file in email is the technical of workbook. I want change the name of attchment file and found this thread
[Broadcasting Workbook - Change attachment filename|Broadcasting Workbook - Change attachment filename] that reference to method in background process. Can I create customize program or method to change the name of file.
Thank you and really appreciate your help.
Zilla D.

Hello Zilla,
By SAP methods, this is not possible. There is no way to do that. May you can suggest it on our Community of Innovation. See note 11.
This is not only your concern. Some customers already request this functionallity.
Best Regards,
Edward John

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

Why I can't see the button fuse, when I drag and drop a folder into same name folder

Why I can't see the button fuse, when I drag and drop a folder into same name folder
I saw the option only one time, and i reseach in the internet and I find fuse option, but now never saw again.
And Yes, I drag folders with the same name.

Ok, Gracias por su pronta respuesta, yo necesito arrastar una carpeta a otra ubicacion con una carpeta del mismo nombre, entiendo que lion te advierte si desea reemplazar el contenido o fusionar (mexclar el contenido)
como lo dice aqui :
http://www.cioal.com/2011/06/29/las-cinco-novedades-mas-importantes-de-mac-os-x- lion/
3. Podrás combinar tus archivos y carpetas. Seguro que alguna vez has perdido algún archivo al combinar carpetas o archivos del mismo nombre pero distinto contenido. Ahora, cuando intentes mover una carpeta a un lugar con otra de idéntico nombre, tu equipo te preguntará si prefieres combinar ambas o cambiar una por otra. Los archivos serán tratados de una manera similar: Cuando coincidan archivos con el mismo nombre, el sistema te preguntará también si quieres mantener ambas copias.
y en muchas otras paginas que tratan el tema.
mi problema es que esa opcion no me aparece. solo la opcion de reemplazar (o no reemplazar o detener)
Lo increible es que alguna vez el mismo dia de hoy si me aperecio la opcion.

When i drag and drop to my ipod it wants to sync everything, but if i make changes to the syncing options and apply it wants to sync it all to make it work. i have 12000 songs and takes two days to sync everything. is there an easier way to drag and drop

when i drag and drop to my ipod it wants to sync everything, but if i make changes to the syncing options and apply it wants to sync it all to make it work. i have 12000 songs and takes two days to sync everything. is there an easier way to drag and drop just one album without making settings changes?

The first ever Sync of 12,000 songs to an empty iPod will take a while, but it shouldn't take two days.
Once all 12,000 songs have been Synced to the iPod, subsequent changes to just one album will result in a very short Sync time. That Sync will include:
the change to that one album
play counts on iPod updated into your iTunes Library
Smart Playlists updated: some complex Smart Playlists are not always updated by the iPod but have to wait for a Sync with the Library.
housework - in other words, behind the scenes tasks that we don't need to see.
Those subsequent Syncs do not sync every single song every time.
So, stick with Syncing. If the first Sync of all your songs is taking too long, try syncing part of the Library (say one or two genres) the first time, a further part the second time and so on. After all, with a Library that large, manually managing the iPod will be a source of torture.

My hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does sa

my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please

If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard.

ITunes locks up when I drag-and-drop video file into library

I have some videos that I have on my computer that I want to add to my library but when I drag and drop them into my library iTunes freezes. I never had any problems with this before. The format is right. I used a program to convert them and other videos worked but this one.

What version of iMovie?
What Device?
Have tried to restart, soft reset your device?
What is the video audio source?
This forum is for iMovie iOS (ipads & iphones).
Are you referring to iMovie Mac?
If so I can get your post moved.

When I drag and drop a wav file into garage band it is rejected. How to imposrt a wav file?

Hi Everyone,
I want to edit a voice recording, done in WMA format, in Garage Band.
I saw a video in which the fie is simply draged and dropped in the timeline area, and the time line appears. Then youcan edit it.
But when I drag and drop this WMA file into the editing area, it jumps back out to where I dragged it from.
Is there any way to import WMA files intoGarage Band?
Thank you, Giorafromny

Giorafromny wrote:
Is there any way to import WMA files intoGarage Band?
not directly, you'll need to use some software to convert it to a format supported by GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#importformats
(Let the page FULLY load. The link to your answer is at the top of your screen)

When I drag and drop an icon from the address bar to the desktop is does creat the shortcut but will not display the website icon, only the firefox icon, how can I display website icons?

When I drag and drop a website icon from the Forefox address bar to the desk top, the short cut is created but the icon that appears is the firefox Icon. I want to disply the icon from the website that the short cut refers to. I have checked all I can think of in my computer to no avail.

You have to assign the favicon yourself to the desktop shortcut (right-click the shortcut: Properties) after you have dragged the link to the desktop.
You can usually find the favicon in Tools >Page Info > Media and save the icon there.
Otherwise use the main domain of the website and add favicon.ico (e.g. mozilla.com/favicon.ico ) to display the favicon in a tab and save that image to a folder.

Hello, does anyone know why when i drag and drop from the internet,why my images never show up?

hello, does anyone know why when i drag and drop from the internet,why my images never show up?

I'm wanting to drag images from the internet into a folder on my desktop or hard drive. I am used to being able to drag just about any image from any website off the web and into a folder on my old mac, but since I got my laptop, I've noticed I cannot do that. Is it a preference?

Are there any events to script a component when dragged and dropped into the parsys area?

are there any events to script a component when dragged and dropped into the parsys area?

The cq:listeners node of a component's cq:EditConfig has a number of events that fire with relation to the edit mode drag'n'drop stuff. You would probably want to hook one or more of the insert ones (beforeinsert, beforechildinsert, afterinsert, afterchildinsert).

Drag and drop into playlist not working + changing of timezone

Hey All
Ive searched and cant find an answer to this anywhere
My PC crashed pretty hardcore like (unable to load vista to deauthorize account before formatting PC) so a format ensued, once i formatted i reinstalled itunes and reauthorized my account for my ipod touch did the whole back transfer and delete and resync of my ipod so now i have to put all my music back onto the ipod touch (well not all my music just the stuff i want to listen too)
So i went and made a new blank playlist (not a smart list) and proceeded to fill ... when i came accross my problem i cant drag music from the library to my new fresh (definitely not a smart playlist) Playlist
ive checked the "manually manage box" in the ipod summary screen but even when the ipod isnt plugged in i cant drag and drop. i can right click and add to playlist fine ... just not drag and drop
also when i plug my ipod in it sets my timezone to london and changes my time .... rather annoying considering i use my ipod as an alarm clock
any assistance is greatly appreciated
Thanks Rey

You're Very Welcome Nick!
I'm glad the fix was that simple!
Also, I notice that you have marked your question as answered, but have not utilized the Helpful or Solved options. That may be intentional, but, if you are not aware of the benefits, of using that function, here is some information.
When you mark the appropriate posts as Helpful (5 pts) 2 available, or Solved (10 pts) 1 available, you are Thanking the contributors, by awarding them points.
In threads with multiple replies, it also alerts other readers, to which answers may have been helpful, or solved the issue.
This info, and more, can be viewed by clicking on
? Help & Terms of Use, located under your login name, on all "Discussions" pages.
Specifically What are question answers?.
ali b

Logic changing the names of audio files when I drag and drop into arrange

Similar Messages

Maybe you are looking for