Logic Control Working Properly anyone?

My logic control has not been working properly for a while.
It does most things fine but it does not do the following:
1. The Automation buttons don't do as they are supposed to; Pressing Latch, Touch or Write just enables READ mode.
2. Pressing the Down Arrow button Enables Send #8- It's supposed to scroll through the sends 1, 2, 3, 4 etc.
3. The Rotary pots for Send/Pan when turned send the Send/Pan paremeter to either 0 or 127!!
That's most of the problems. There may be more but I would really appreciate any help on this.
Thanks
Felix

If you are working in 64 bit mode, i think i can help, as i had the exact same issue.
1. Quit Logic
2. Trash the Control Surface Pref file "com.apple.logic.pro.cs"
3. Go to The Logic application - go Command-I to open up its information pane. Click the button to open Logic in 32-bit mode.
4. Open any Logic file.
5. Confirm that your automation buttons now work correctly
6. Quit Logic.
7. Go back to the information pane. De-click the 32-bit button
8. Re-opn Logic in 64 bit mode. You should be all fixed.
HTH

Similar Messages

Any suggestions for how to get my logic keyboard working properly for FCE?

Any suggestions how to get my logic keyboard working properly for FCE? I can't use some of the shortcuts - insert, overwrite etc. maybe the system settings aren't correct?

This normally happens when debris builds between the trackball and the rollers on the inside of the mouse.
Turn the mouse upside down and rub the trackball vigorously on a sheet of paper or microfiber cloth to try and free it up.
Regards,
Captfred

HT204492 can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
Try pairing the remote again:
How to Pair your Remote to your Mac:
http://support.apple.com/kb/HT1619?viewlocale=en_US

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Has anyone gotten DLNA to work properly with Windows 7 x64 ?

Has anyone gotten DLNA to work properly on Windows 7 64 bit and Windows Media Player 12? I got it working, sort of. It's not reliable though, and very slow. It drops the connection a lot, and when I go to engage it it connects about half of the time and half of the time it won't see the Media Server. It also times out when trying to scan my (admittedly large) music directory on my PC.
I'm sure that my hardware is ok, I think that DLNA is just a buggy system. But if anyone has it working properly with Windows 7 x64 and WMP 12 can you tell me exactly how you set it up? And if you used another desktop app besides WMP can you tell me what worked for you?
Thanks!

Try setting it up like this. Hope this helps!
Start Device Manager.
Windows 7 Click Start > Control Panel > System and Security > Device Manager.
The following devices are normally installed:
Anrdoid USB Devices
My HTC
Disk drives
HTC Android Phone USB Device
Modems
HTC Modem (if using as a tethered modem)
Portable Devices
E:/ (Where E represents the assigned drive letter.)
Universal Serial Bus controllers
USB Composite Device
USB Mass Storage Device
If a red X, yellow ! or yellow ? is displayed to the left of a listed device, a conflict is present and the drivers must be updated or reinstalled.
Driver conflicts may also be indicated by a device entry labeled Other Devices or Unknown.
If a conflict is present:
If using the HTC DROID Incredible ADR6300 as a Sync device continue to step 3.
If using the HTC DROID Incredible ADR6300 as a Modem ensure the device drivers are installed. Refer to Downloading and installing VZAccess Manager for additional assistance.
If VZAccess Manager is installed and a driver conflict is still present, continue to step 3.
Right-click the device then click Update Driver Software.
If using Windows 2000 / XP, right-click the device then click Update Driver.
The device name may differ from the example shown.
Click Browse my computer for driver software.
If using Windows 2000 / XP, select Install from a list or specific location (Advanced) then click Next.
Enter C:\Windows\System64\driver into the search window then click Next.
The driver location can be entered manually or navigated to by clicking Browse.
If the driver software is not found, a Windows Operating System update may be needed.
Click Close.

Logic Control difficulties with 8.0.2 anyone?

Hello to all
Just a quick check to see if anyone else is having problems with the Logic Control surface and the 8.0.2 update. To date the zoom function and the fast forward/reverse buttons are not working on my system, which is a G5 Dual 2ghz Tiger 10.4.11. Also, the undo button doesn't undo and the assignment buttons don't assign.
Regards

[edit]
still doesn't work at all... though I can 'solo' the AUXes... just not select them.
If I try to select them and add an EQ (EQ+Vpot8), it adds an eq to the channel that has the visual select light lit!
Message was edited by: mattrixx

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Safari has stopped working properly since upgrading to Mountain Lion. Have parental controls in place and it will not add websites. Also short cuts at top of tabs now all messed up!

Since upgrading to mountain lion the other day (from lion) safari has not been working properly. I have parental controls in place but seem unable to add new web pages to allowed list - wasn't expecting to have to anyway - these are webpages that were working perfectly well on safari prior to upgrade. Also the shortcuts above the tabs on safari are all now messed up.
Any advice on how to fix - I am not a computer expert so keep it simple please!
In the meantime I am having to use Firefox.
Thanks
Andrew

Since upgrading to mountain lion the other day (from lion) safari has not been working properly. I have parental controls in place but seem unable to add new web pages to allowed list - wasn't expecting to have to anyway - these are webpages that were working perfectly well on safari prior to upgrade. Also the shortcuts above the tabs on safari are all now messed up.
Any advice on how to fix - I am not a computer expert so keep it simple please!
In the meantime I am having to use Firefox.
Thanks
Andrew

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

MacDrive to provide better HFS support.
And to acces and write.

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly. I have uninstalled/reinstalled evernote but it still doesn't work. Anyone know where evernote stores their files on a Mac/

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it. I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work. Anyone know where evernote stores their files on a Mac? Or had this problem.

Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

HT4623 I updated my phone last night now it is not working properly. Does anyone else have this problem? I have a 4S

I updated my phone last night now it is not working properly. Does anyone else have this problem? I have a 4S

Try a hard reset.....
Press and hold the Wake / Sleep button and the Home button at the same time, keep them both pressed until the Apple Logo appears.

Anyone notice the Calendar doesn't work properly in the IOS 5? Can't put a new event in there and can't change calendars

I just updated to IOS 5 and now the calendar doesn't work properly. Can't enter a new event or change Calendars. Nothing updates from the Remiders either. Anyone have an answer as to what may be wrong?

I just updated to IOS 5 and now the calendar doesn't work properly. Can't enter a new event or change Calendars. Nothing updates from the Remiders either. Anyone have an answer as to what may be wrong?

Does anyone have a problem where they try to download a movoie trailer the day it comes out and then it says iTunes is not working properly and shuts down iTunes?

Does anyone else have a problem in iTunes where they download a movie trailer and then they get a message saying iTunes is not working properly and it shuts off iTunes?

Hello Suzanne,
Thank you for providing the details of iTunes unexpectedly quitting. You have taken some really good troubleshooting steps already. I found an article with additional steps you can take to further isolate and troubleshoot an issue like the one you described:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M.

Logic Control Working Properly anyone?

Similar Messages

Maybe you are looking for