Logic doesn's recognize my Roland TD3 MIDI connection.. HELP!

Hi,
Maybe someone can help me with this. I am trying to use my Roland TD3 through a MIDI cable (TD3 MIDI OUT TO MBOX 2 MIDI IN) with Logic 9, but it doesn't seem to recognize the TD3 as I rescan for midi. I know MIDI is working just fine because I have an M-Audio keyboard controller hooked up via USB, and that works just fine triggering all the MIDI sounds.
My question is, how do I get Logic 9 to recognize the Roland TD3? is there a manual way to do this other than the obvious "add a midi device" under Applications/Utilities/MIDI setup.. which I've tried but still not reading it, or maybe I am not doing it right.
I would appreciate any help on this.
Los.

I'm having the same exact problems with this cable and the Roland TD-6V. It has been driving me crazy. I'm ready to scrap the Midisport uno and go a different route. Does anyone know of an interface that will definitely take midi from a Roland?

Similar Messages

  • Roland TD3 Midi Recording Help

    I have a Roland TD3 Electric drum set, a Midisport UNO midi to usb interface and Garageband 08.
    I Set my drum kit to local controle off. I pluged in the midi cable in the proper inputs, installed all the nessisary drivers. I set up my drum kit as a software instrument. Every time i strike a drum it has a blue dot go off in the time measure box(it's blue). No sound comes out. When i go to record though no midi is recorded. Also when i unplug the cable it tells me the number of midi imputs has changed. Please help me I called Apple for 2 hours we tried to do it still no figured it out.

    I'm having the same exact problems with this cable and the Roland TD-6V. It has been driving me crazy. I'm ready to scrap the Midisport uno and go a different route. Does anyone know of an interface that will definitely take midi from a Roland?

  • My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

    My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
    I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

    Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk.  Duh!  The application for the home is in the mail.

  • I have changed my apple id but cannot change it  on ipad. My old id comes up with request to log in, but it doesn't recognize my password or birthday. Help please.

    I have changed my apple id on itunes but can't change it on ipad. My old id asks for login but doesn't recognize password or birthday.  Help please.

    Hi on iPad itunes bottom of page Sign out then sign back in with new details. Cheers Brian

  • Mac doesn't recognize external HD anymore. Any help is appreciated.

    Hi Everyone. Suddenly, my MAC mini doesn't recognize my external hard drive any more. It was fine for years and today it's not "there".
    I tried connecting with different fire wire cables and still, same problem.
    I also tried connecting the external HD to my iMac and still, doesn't recognize it.
    I tried restarting many times, still, same problem.
    I tried disconnecting all cables and power cords, reconnecting them and powering on, and that didn't resolve it.
    I have been searching the web all morning for ideas and can't seem to find a solution.
    The external HD is a Maxtor III 300 GB. Older one but was big enough for my needs.
    I was reading that sometimes doing a software update might cause an issue with external HDs. I just don't know how to resolve that if it is.
    This hard drive is formatted for the Mac.
    According to Maxtor I do not need to update my drivers. I was thinking that maybe one got lost.
    Any help is appreciated. Thanks in advance!
    Christine

    If only the mini couldn't read it, that would lead down one path. However, if both the mini and the iMac can't read it, that sort of points to an issue with the drive. Do you hear the drive power up? If you have an external power supply have you tried that or do you use that with it?
    It's possible that the hard drive is in fine condition, and it's the case electronics that are acting up. You should be able to pull the hard drive out of the Maxtor case and put it into another external case, to read the hard drive, assuming the drive itself is OK.

  • Tried to update software and came back 3hrs later and there is nothing on my ipod, no apps, music says it doesn't recognize and need to recover Please help!!

    tried to update ipod and came back 3hrs later and there is nothing on my ipod.  all apps and music etc are gone and computer doesn't recognize my ipod and need to recover.  Please help!!

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • ADE 3.o doesn't recognize my Sony PRS-T1: please help me !!!!!!!!!!!

    ADE 3.o doesn't recognize my Sony PRS-T1. Installation run well on desktop. Unlock of an e-book run well on desktop. Ebook copied to reader. But reader is not recognized be ADE so I cannot unlock ebook on reader.
    Thanks a lot.

    Hello
    I am very sorry to tell you that ADE is not compatible with Prs-T1. You have to use calibre or reader for pc. In reader for pc you can autorize yor reader for drmprotected material. After that you can use calibre if you dont like reader for pc.

  • My iMac doesn't recognize mouse clicks... HELP!

    Ok, I reset the SMC and PRAM (and repaired permissions)that made the mouse work until I shut down then I would have the problem again when I started up so I would have to zap the PRAM again.  I downloaded Mountain Lion and loaded it thinking this would overwrite any errors but now I can't log in at all. Even zapping the PRAM can't get it to recognize mouse clicks (the courser does move) .  Somebody please give me some advice I have total work stopage and I'm desperate!

    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Win/iTunes doesn't recognize iPod + monochrome charger icon, please help

    Yesterday, my iPod was fine and now it doesn't seem to work. When I put in my iPod, it goes in, I see the Apple logo and then it goes straight to the monochrome charger icon. iTunes nor Windows recognizes it and when I take it out, the iPod doesn't work at all. Nothing appears. I tried the R's, and nothing. I've had the iPod for about 6 months, I'm hoping the battery didn't expire already... Someone please help me out. If it helps, iTunes 7.0 and I have Windows 2000 and Disk Use was enabled. Thank you.

    Anything here of help?
    http://docs.info.apple.com/article.html?artnum=302420

  • Does anyone know how to fix the settings when your your mac doesn't recognize your external speakers?? HELP! I've tried everything.

    So, I have a macbook pro.  I used earphones to listen to music and everything worked fine.  A few hours later, after it had been unplugged, I tried to listen to a video and the sound did not work.  I have tried everything.  Rebooted my computer multiple times, reset the PRAM twice, and checked my MIDI setup.  When I go to sound through system preferces, this is what shows up: Output -- Digital out -- optical digital-out port and there is no option for external speakers!  It isn't even showing that I have them!!!  My internal settings are fine.  HELP please!

    This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
    (PS Everybody please make noise on this one so apple comes up with a solution.)
    < Edited by Host >

  • My mac doesn't recognize my ipod.... help!

    I started having problems after I updated to the newest iTunes. I tried to plug in my iPod to update the songs, but when I plugged it in, a message popped up that said that the computer didn't recognize what was connected to the USB.
    So I went to the iPod support site and tried the five steps, none of which worked. And when I tried restoring my iPod, I think it made the problem worse ... now the little folder symbol with the exclamation point pops up, which it didn't do before. And - eep - I can't find the original disk that came with my iPod. I've had it for like a year and I've just lost track.
    Does anyone have any idea what I can do??? I want to fix my iPod, but I don't think I'll ever recover if my iTunes has to be erased...
    Feel free to reply to the post or e-mail me, [email protected] . Thanks to anybody who has some advice for me!!!!!

    First, please find a window based PC around you, plug your iPod with it (you may need to put your iPod in disk mode) and do a Restore there. Once it has been done (does not matter whether it manages to complete or not), reconnect it back with your Mac, and it will be read this time, then open the iPod updater on your Mac and click Restore.

  • HT2452 just got a replacement wireless keyboard for imac but comp doesn't recognize it and won't connect. can't type or use it. any suggestions?

    Just got a relpacement wireless keyboard for my imac but the computer won't recognize it and b/c i can't use the keyboard (type) there's little troubleshooting i can do. how do i reconnect this? thanks!

    You may need a wired keyboard to carry out some of these steps. It's a good idea to keep a cheap wired keyboard and mouse or trackball as backups for a desktop Mac anyway, because Bluetooth isn't completely reliable.
    Step 1
    Follow the instructions in these support articles:
    How to set up your Apple Wireless Keyboard
    Apple Wireless Keyboard: Difficulty during pairing process
    Step 2
    The keyboard should pair automatically when you reboot. You may have to press and hold the power button on the right side of an Apple keyboard until the LED starts flashing.
    Step 3
    Reset the System Management Controller.
    Step 4
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/com.apple.Bluetooth.plist
    Right-click or control-click the line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    See these support articles:
    Bluetooth keyboard may not pair during Setup Assistant
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    Bluetooth: Unreliable wireless performance may occur when USB 3.0 external devices are close
    Step 6
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • IPhoto doesn't recognize my email/password combo, please help

    I am unable to email photos from iphoto.  My computer states that it cannot recognize my email/password combo.  please help.  Thanks

    What version of iPhoto?
    Assuming iPhoto '11 in the iPhoto preferences ==> accounts delete your account and re-enter it
    Or IMHO a better solution is to set Apple Mail as the email client in the iPhoto prefeences
    LN

  • HT1349 My new iPhone 4S won't sync to my MacBook Pro.  I installed the latest version of iTunes but it doesn't recognize my phone when I connect with USB.  Any ideas on how to resolve this?

    It's strange, on my work issued Windows laptop I have no issues syncing my iPhone to iTunes.  But on my personal MacBook, iTunes does not pick up my iPhone when I connect via USB.  Any advice on this please?

    See http://support.apple.com/kb/TS1591.

  • HT1848 my ipod touch 4th generation will not power on, and itunes doesn't recognizes it when it is connected through the usp

    I can not get my Ipod touch to power on, and it isn't recognized by itunes when it is plugged in. does anyone know what the problem could be and or have had the same problem and fixed it??? I appreciate any and all help with this problem, and definately open for suggetions. Thanks again. Cynthia

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for