Logic doesn´t find sounds.

Logic doesn´t find sounds. When I want to play a software Instrument I get e.g. the message: EXS24-Instrument "TenorSax.exs."Audiodatei „TESLNOMA2X01“ nicht gefunden!

Thanks for your prompt reply, Mike!
I'll probably try to reinstall Logic (the safest way)... I don't think moving folders or files around will make things work...
However Logic 9.1 seems to have some problems in OSX Lion environment:
http://roaringapps.com/apps:table/tags/_l/index_tags/_l
I reckon an update is needed anyway.. Cheers

Similar Messages

My old eMac doesn´t find the hardrive

After restart my eMac it appeared a folder with a question mark. I think my eMac doesn´t find the hardrive. I have tried to reinstall the system but of course it happens the same, it doesn´t find the disc where to install.
I restarted pressing ALT and then appears two arrows but nothing happens when I click on them.
Please, what can I do?
Regards.

It sounds to me like your hard drive has failed.
you'll need to get it repaired. They may or may not
be able to recover your data... I hope you have a
backup system.
Sorry mate.
Yes, fortunately I have a backup of everything and I have a iMac Intel Duo Core... what´s strange is that this has happen to me four times and the only way of recover the eMac was to format the hardrive. I think this time I going to change it for a new one.

ALSA often doesn't produce sound anymore after suspend

Hi,
For some years this has been fine and pulseaudio worked fine after waking up from suspend.
But for about one or two month it more and more often doesn't. After waking up from suspend I just don't hear sound anymore. I can't find any error message anywhere, just that it doesn't output sound anymore. Killing it with "pulseaudio -k" or "pkill pulseaudio" or "pkill -9 pulseaudio" doesn't solve it. But "telinit 1", waiting until pulseaudio is dead and then "telinit 5" solves it so it is definitely not my sound driver.
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Any ideas how I can find out what's wrong?
Last edited by Cdh (2012-05-10 19:48:45)

Maybe the power saving for my sound chip triggered the problem. I had this in my startup config:
echo 1 > /sys/module/snd_hda_intel/parameters/power_save
I have removed it and hadn't had that problem so far. If it doesn't happen in the next time I'll mark this as solved. :-/
EDIT:
Nope, it didn't help. Today after waking up from suspend it didn't output any sound although everything seemed fine.
This time I tried transferring the sound over the network with pulseaudio. That worked.
Then I killed everything and even went to init 1. But there not even mplayer -ao alsa worked and I had to reboot to get my sound back. So, not pulseaudio's fault, but alsa doesn't work right.
Linux chrisl 3.4.0-1-mainline #1 SMP PREEMPT Mon May 7 11:06:02 UTC 2012 x86_64 Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz GenuineIntel GNU/Linux
Last edited by Cdh (2012-05-10 19:51:19)

My new iMac doesn't have sound, what can I do? I'm new with mac

My new iMack doesn't have sound, what can I do? I'm new with Mac

What do you mean it doesn't have sound? If it's a new machine call AppleCare, you have 90 days of support via telephone and can find the number in your owner's manual.
I'd also STRONGLY suggest you book mark and begin using:
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/
http://www.apple.com/findouthow/mac/#anatomy
https://discussions.apple.com/message/16096111#16096111

Logic doesn't receive a midi signal any longer

The whole morning I worked on my project in Logic, using my 2 midi keyboards, no problem. Now suddenly they stopped working. Logic doesn't receive any signal any more. I already did a midi driver reset, restarted the Mac, turned off and on the keyboards, checked the cables. Nothing works. What can be the problem?

If your MIDI interface does not appear, make sure it is powered on and connected to your computer. If you are running any Classic applications and your USB interface did not appear, quit AMS and all MIDI and Classic applications, shut down the Classic environment (you can do this in the System Preferences). If you did not install Mac OS X drivers for your hardware, you may need to do so.
If your MIDI interface is grayed out, like the Emagic EMI 6|2 M in the illustration, that means that this interface was previously present when you ran a MIDI application, but the driver could not locate it, or the driver is no longer installed. If the device is present, quit AMS and all MIDI and Classic applications, shut down the Classic environment, and make sure that drivers for your hardware are installed. If you no longer have this hardware, you can select and delete the interface if you like.
If your MIDI interface appears and is not grayed out, like the Edirol UM-880 in the illustration, this means that your device’s driver has successfully located the hardware and all is well. If you like, you can begin using your MIDI applications without any further setup. In your applications, you will see the names of the hardware ports, as assigned by the driver. In the case of the UM-880, for example, you will see “Port 1,” “Port 2,” etc.
If Audio MIDI Setup crashes when starting or when you click on MIDI Devices, this is probably because the MIDIServer process has crashed while starting, most likely due to a problematic MIDI driver. Try moving aside 3rd party MIDI drivers. Drivers are normally installed in/Library/Audio/MIDI Drivers, though they may also be loaded from\$(HOME)/Library/Audio/MIDI Drivers and/System/Library/Extensions. You might find useful clues as to which driver is crashing in:\$(HOME)/Library/Logs/CrashReporter/MIDIServer.crash.log (scroll to the bottom for the most recent crash).

Mac doesn't find Apple TV but iPad does..

Hi
I bought a Asus rt-n56u the other day and set it up with my Netgear cg3700 provided to be by my internet supplier. I turned off the router mode on the cg3700 when I connected them both.
When I tried to airplay a video from iTunes on my mac (macbook pro mid 2010) it doesn't find the Apple TV. Homesharing from the Apple TV doesn't work either (although it did before I installed the rt-n56u). I can't airplay or share my screen from a 2013 macbook air either.
But when I try to airplay videos from my iPad it works just fine. Furthermore I can access my videos in iTunes on my iPad trough homesharing.
This means that they are all on the same network and I can play a video in my iTunes-library on my Apple TV by finding it trough homesharing on my iPad and then airplay it from the iPad to my Apple TV. But I would like it to work as it should and not this way.
Does someone know what I should do to get it to work?
(I've tried to restart the modem, router, Apple TV, Mac and so on ...)

Apple unwisely used the name Airplay mirroring in my view as older Macs could only push a pre-rendered iTunes stream (eg purchase) via Airplay.
Airplay mirroring is quite different as you may know which is why older Macs are not supported.
This really does sound like a networking configuration issue - you've done the restart all devices I'd normally suggest.
Are some devices on ethernet?

Convert a Classic (sfil/movr) Finder sound file?

I just stumbled across a sound file I saved more than ten years ago, what seems to be called a "System 7 Finder Sound." It's basically a resource-fork-only file with a 'snd ' resource.
I actually may have a machine capable of running Classic, but I'd rather not. Is there a way, under 10.5 Intel, to convert this file into a usable sound? QuickTime Player and GarageBand both refuse to open it.

This addresses my question, but doesn't fully solve my problem. Playing the sound is nice, but I'd also like to convert it into a form I can (for instance) play as a preview in the Finder, without the need for a special-purpose utility.
Is there such an application? I'd much prefer free- or sample-ware, as I need this for only two or three files.

My ipad doesn't find my printer....

How do I make my hp 3510 discoverable to my ipad? The wireless printing works from my laptop which has the same wifi settings, but the ipad cannot find the printer????

Hi Kiwisteve77,
I understand the Ipad doesn't find the printer.
Thank you for your reply.
I will be happy to help you with this.
Try turning the wi-fi off and on again on the Ipad.
If that doesn't work turn the Ipad off and on again.
Check to make sure it is connected to the proper network.
Power cycle the router, Ipad and the printer and try it again if you are still having issues.
I have provided a document for How to Use Apple's AirPrint Over a Wireless Network. Go to the section What if a 'No AirPrint Printers Found' message displays on my Apple device?
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

You may very well have damaged your library - or even your system by not having adaquate storage available
And never select all of the pitcture and move them - that will destroy your library - the iPhotolibrary is a SQLite database and must always be kept intact as a single entity -
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

ICal search doesn't find anything

when I test this by creating a future event with a particular word in it, then return to today and search for that word in the little "search" box at top right, it doesn't find that word.
Why not?

I have also had long standing problems of not being able to search for calendar events, either from within iCal or Spotlight or using mdfind.
None of the suggested solutions worked for me (removing Calendar Cache file, adding and removing folders or drives to the privacy section of Spotlight to re-index, or running mdimport ~/Library/Calendars.
One clue was that mdimport -d2 ~/Library/Calendars would not even look at the individual .ics files within any .calendar/Events directory (no output). I suspected that this was due to LaunchServices not associating these files properly with iCal. My system had previously been upgraded all the way from 10.0 through 10.6.
What finally worked for me was the following, using the Terminal, rebuilding completely the LaunchServices database:
rm /Library/Caches/com.apple.LaunchServices*.csstore
*defaults delete com.apple.LaunchServices*
*sudo /System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServi ces.framework/Support/lsregister -kill*
*sudo /System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServi ces.framework/Support/lsregister -R -domain local -domain system -domain user*
(note the capital -R in the previous line.)
This step will take a few minutes to complete, with a message about I/O throttleing
reboot (not sure if that is necessary)
*mdimport -d2 ~/Library/Calendars*
This last command should now show the successful indexing of all calendar events.
After this search finally worked again for me!
Regards,
Heiko

Search engine doesn't find vcards

The search engine in Address book doesn't find cards that exist in my ALL. They were cards imported via Time Machine. Any way I can get AB to index it's content ?

One week later, I'm still hoping (praying ?) for a solution...

Find palette doesn't find the IPCT category field

I have all my pictures by categories and suplemental categories. The "find" tool doesn't find anything if for example I type ARC (architecture), no matter if I select containing, containing all, starting or all metadata, all, etc... It seems that it doesn't search in some IPCT fields, at least in the category and suplemental category.

You are right. "find" will find IPTC entries in caption, say, but not in category. I guess it's like EXIF, where it's only make, model, serial number, artist, and software.
- Pierre

The "Search" function box doesn't find things that are there! Why?!

The "Search" function box doesn't find things that are there! Why? Eg: It doesnt show all my Sent and Received emails, but it will find an email that I half wrote and deleted. Unsure why or how to explain more fully.
I also don't understand if I type in "James email" or "J" into the search box and all the J / James stuff appears but it doesn't show the emails I know have been sent and I know are somewhere because I rang "James" up to check, but the search box shows random thing I am NOT looking for, even if I type in fully what I am looking for and test it by typing in full titles of things.
It also doesn't store all my sent emails in "Sent" box. Confused! I'm not sure if the "Search" box just isn't up to the job or if it is broken / i'm doing something wrong? Maybe the email address I use isn't set up properly?

This can happen sometimes if the cache is not cleared correctly when items are not deleted from your device.
The only solution to this is to do a restore to clean out the cache file.

Satellite L855D doesn't find my CD/DVD drive

Hello!
I don't know what has happened to my computer but it doesn't find CD/DVD drive anymore.
I guess I may have deleted some necessary drive but not on purpose anyway.
Is there any way to recover it?
I have tried RmvFltrs which I found from some Toshiba's tech support site via Google search but it didn't help.
It stated that it worked but my computer tells me the installation couldn't be done.
I'm not in a desperate need of the drive to work, I'm just wondering whether it is possible to make it work somehow. So if someone could help me with this I'd be more than glad.
Sincerely,
Joonas

I mean that it isn't shown in "My Computer" anymore or if I try to install something from a CD it doesn't work since the drive doesn't work.
I can find it from device manager yes but it gives me this "code 52" and says the digital signature cannot be verified. There's this yellow triangle with an exclamation point in it too. Does this help at all?

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers.

Logic doesn´t find sounds.

Similar Messages

Maybe you are looking for