Logic doesn't save MX4's plug-in settings :-(

Anyone working with the MOTU MX4 software instrument? I had an amazing session going today, and when I saved and closed the project, Logic didn't save any of the plug-in's preset information. Each instance of the plug came up in the default patch. DOH!
Today was the first time i've used MX4 in Logic... I love the plug, but I won't be able to use it if it won't retain the settings.
anyone else using this plug problem free????

can you not just save your settings in the MX4 instances themselves? then we you reload your song they should come up as saved, or at least you'll be able to reselect them. not ideal but it should work for the time being.
I'd contact MOTU support, you can't be the first person that has run into this problem.. I'm sure most people use MX4 with DP, but if MOTU try to blame logic for this behaviour I wouldn't accept that as an answer. they may have better ideas for a workaround, and in any case you should be demanding a fix. if they are selling an AU plug in that will work in more hosts than just DP, then they should be making an effort to implement these kind of basic functions so they work properly across a variety of different hosts.

Similar Messages

PB G4 17" doesn't recognize it is plugged in or charge battery

My Powerbook G4 17" doesn't recognize it is plugged in (battery icon doesn't show "plugged in" icon) nor will it charge battery (down to 42%!).
I live far from an Apple dealer and know no one else who has a Powerbook so I can borrow their cord.
I have:
1. Bought new power cord
2. Reset PRAM
3. Plugged into various outlets and made sure connection is good
4. Turned cord around in the port
If I reset PMU will that help? Will it erase all my files?
Any other ideas what would help?
Thanx!

When you say you bought a new power cord, do you mean power adapter? If yes, you should have power from the wall outlet to the computer. You should be able to run your Powerbook without the battery. If that doesn't work, and you have a new power adapter, which you'd assume is good, the issue is likely inside the Powerbook. You could always take your Powerbook to a local Apple store or Apple Authorized Service Provider to use a known power adapter to confirm that is not the issue (on the off chance the one you got is for some reason bad).
If you look at where you plug in the power adapter on the Powerbook, does the jack inside seem to wiggle alot? A little movement is normal, however, if it seems very loose, then you may have a DC-in card problem. They are not horribly expensive to replace (card is around $100). If that's not it, then there is a logic board issue, and you're talking taking it to your Apple store and signing up for their 'fix everything for a flat rate' which is around $350, which is less than the price of the logic board itself, if you replaced it.

HT4059 When I have a PDF that I want to open and save into iBooks - it will attempt to open it and the shelf flips around to make room for it. But it doesn't save it. I have to end up opening it in Adobe or Kindle app to view & save it.

When I have a PDF that I want to open and save into iBooks - it will attempt to open it and the shelf flips around to make room for it. But it doesn't save it. I have to end up opening it in Adobe or Kindle app to view & save it. This has been doing this awhile, what's wrong. Should
I take it and have it looked at?

is there any important stuff saved to your emails? if so you could log on to your emails from a seperate device and back them up. im not sure what else you could do :/

When i upgrade my Mac Pro to yosemite safari doesn't good work and doesn't save bookmark plz help me to fix it

when i upgrade my Mac Pro to yosemite safari doesn't good work and doesn't save bookmark plz help me to fix it

hi
when i save a page as boomark shown at the bookmark list when i close safari and restart safari evry bookmark that i saved dosn't show at the bookmark list
excuse me for whriting i speak a little english
1 save bookmark and show at the bookmarklist
2 i close safari
3 and reopen it
4any bookmark ,i saved them dosn't show at the bookmark list

I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Tnx

I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Can I do that manually through iTunes?
Thanks!

Hello jon713,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
App Store Application data (except the Application itself, its tmp, and Caches folder)
Application settings, preferences, and data, including documents
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
To transfer iTunes Store purchases from your device to a computer, follow these steps:
Connect your device to the computer. If it is synced with another iTunes library, the following dialog may appear:
Click the Transfer Purchases button.
Have a nice day,
Mario

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave

Edited photo doesn't save to PC (iOS 8)

(iOS 8, iPhone 6) When I use the iPhone Photos app to edit a photo to, for example, remove red-eye and/or use the magic wand tool, then click "Done," it says it saves. I can go back into edit mode with that photo later and it always gives me the option to "Revert" to the original, so it obviously doesn't save the edited photo as a separate image. The problem is, when I transfer an edited photo to my computer (via Lightning cable) it saves the original, unedited photo on the computer. Is this a bug or is it intentionally not saving the edited photo?
Whenever I edit a photo and connect my iPhone to my Windows computer, there is a local disk icon(s) in the DCIM folder along with the original photo(s). Meaning, if I edit three photos, there will also be three local disk icons in there as well. If I revert a photo to its original state, the corresponding local disk icon disappears from the Windows Explorer window.

LR 4.4 uses a large internal colorspace which is ProPhotoRGB with an sRGB gamma curve, so you might want to set your PS RGB workspace to ProPhotoRGB and see if that makes any difference.
What is the nature of the difference you’re seeing between the LR version and the PS-CS6-reimported version? Can we see a screenshot?
Did things used to work ok and this just started happening or have you just started using LR and/or CS6?

My ipod touch (4gen) won't turn on or charge. My computer doesn't recognize when I plug the ipod in. What can I do?

My ipod touch (4gen) won't turn on or charge. My computer doesn't recognize when I plug the ipon in. What can I do?

same problem over here

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

No logic plug in settings seem to have installed...?

hello kind and friendly list..
so as I have mentioned elsewhere, I'm currently away from my real studio and needing to do some work moderately urgently. while waiting for a shiny new macbook pro to arrive which will make working a normal pleasant experience I hope, I'm botching together a workable logic system on my trusty email machine, a lovely (slow) PB 12"..
anyway, I've installed logic, it's all fine. I then just had to clear out some space on my small internal drive to install the logic content package.. so, I was expecting that from this point things like ultrabeat, es2 etc would have all of their preset programs installed and ready to go.. however, nope, they come up virgin with nothing. I've looked in library/app support/logic/plug-in settings, and within the folders for things like ultrabeat, it shows nothing.
hmm. I thought installing the content package would have put presets in here... ?
is there are way to know where they have gone, or how to get logic to find them if they are indeed installed somewhere, or indeed how to install the friggin things so I can get on with it?
I'm sure it will be OK on the macbook pro cos I'll be configuring a machine from scratch, doing the logic install and content all at once... but for now, I need to at least get some ultrabeat presets happening..
any ideas?

thanks jord, I figured it out... I thought all the settings would get installed when I ran the disc 2 content installer. but then I put in the main logic install disc and ran the installer again and noticed that in the 'customize' thingy, there was a logic pro sound library install that had not been run yet. then I remembered that when I had originally put logic on this machine, I'd skipped all that because I didn't have that much drive space left, and I was only installing a basic logic to do some simple recording. I never intended to try and use it fully on this PB 12" which is just my email, podcast-radio and download TV machine, as it really is not up to the task of running logic the way I need it..
anyway, I selected only the remaining sound library files, installed, and hey presto all the settings are there. now all I need is for the macbook pro I ordered to show up so I can do this project I have to do properly and end the suffering of my beloved poor little PB 12", who will be thrilled to go back to playing downloaded episodes of southpark..
thanks for your input anyway..

Hi I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from t

Hi
I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from these websites but when I open it next time, it requires username & password.
Does anybody know the problem & solution, plz help. I also found disk erros and reaoired permissiomn and the restarted and did disk utlty again and repaired the same disk errors and then did a restart and still does not remember passwords or ask me. Did all this still no luck it saved apple login on here and saved gmail account but others one it used to save does no longer.here is what i did below and still no luck.
Instructions
Set Your Passwords Preferences
1
Open up your Safari Web browser and choose 'Preferences' from the Safari pull down menu
2
Click on the heading 'AutoFill.'
Click on the box next to 'User Names and Passwords.'
4
Close the 'Preferences' window.
Save Your Passwords
5
Go to a Web page that requires a password and enter in your chosen password. Safari will then ask if you would like to save this password.
6
Click on the button 'Yes' in order to save the password.
7
Complete steps 1 and 2 for any other passwords that you want Safari to remember.
Manage Your Passwords
8
Go to the 'AutoFill' section in the Safari Preferences window.
9
Click on the 'Edit' button to the right of where it says 'User Names and Passwords.' This will bring up a window displaying all of the passwords and usernames that you have authorized Safari to save.
10
Click on a password listing and push the 'Remove' button in order to delete the password from Safari's memory.
11
Choose 'Remove All' in order to delete all of the saved passwords.
12

I suggest that you run software update, after which you should have Safari 6.0.5 - then check Safari - Preferences - Privacy & see that 'Block cookies' is not set to Always.
Failing that - switch Safari extensions Off via Safari - Preferences - Extensions & test again

Safari 5.0.2 doesn't save any more google search results in the history.

Hello together,
Safari doesn't save any more google search results in the history.
Steps to reproduce:
1.) go to google.com
2.) search for "APPLE"
3.) open the history
Result: the search for "APPLE" is not saved - only the Google mainpage.
This has something to do with the new search string in the Location bar. Safari does not save URL with /#.
For example:
the new string is http://www.google.de/#hl=...
the old one is: http://www.google.de/search?hl=....
The change must something to do with the new Google-Search-Feature. When I deactivate it, then google works with the old string and I found the searches in the history.
The second negative effect is, when you type "apple" into the location bar (after a search), the autocomplete shows the search result, but when you hit enter, you are redirected to the Google-Mainpage.
Very annoying
Can somebody confirm.
Thanks
Message was edited by: memo_78

Thanks for your reply!
Could you post the bug here, too, please:
http://www.apple.com/feedback/safari.html
I have done it
Thanks in advance !
memo

PSE 2.0 doesn't save files on a PC with windows Vista with 2Tb HD while possible on a 500 Gb HD

on the same PC I use since 4 years I changed the Hard Dusk, PSE 2.0 can read the files from this 2 Tb HD but it doesn't save any file on it while everythibg was OK using the previous HD of 500 Gb : any suggested setting to solve this problem ?

Unfortunately, this is a problem with old version of PS and PSE. They can't see drives that large.

"OK" button doesn't save parameters in Customization Form

Hi,
In some portlets of the portal that I am developing, the "OK" button of the customization form doesn't save the portlets parameters. For an effective change in the portlet parameters we must press the "APPLY" button first. This behaviour only happens in some Portlets, in the others, we change the parameters, we press "OK" and that's it. Is it a known problem?
Best Regards.
Oracle Portal Version: 9.0.2.3.0B

Hi Peter,
Thanks for your reply. I am using simple Portal Dynamic Pages to generate my portlets. So I don't think that we are in presence of a programming bug. Has you surelly know, the customization forms are not controled by the programmer when you generate a portlet based on a dynamic page with parameters.
Best Regards.

[SOLVED] kgpg doesn't save settings

Hi,
I've a problem with kgpg: It just doesn't save my settings. Everything that I change (e.g. setting a default key or a key which should always be used for encryption) gets lost when I restart kgpg.
If I start kgpg in a terminal and change something I get the following message:
kgpg(14795)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
That's it. I just found one config file in
~/.kde4/share/config/kgpgrc
And I'm the owner of this file and have full read and write access to it.
Does anybody else have this problem or knows how to fix it?
matse
Last edited by matse (2011-06-14 20:37:27)

So small update:
I signed a bug report https://bugs.kde.org/show_bug.cgi?id=275644 and the KDE team could help me, in fact the file "~/.gnupg/gpg.conf" did not exist here on this machine, I created a blank one and now kgpg can use it to write the config to it and everything works fine.
matse

Logic doesn't save MX4's plug-in settings :-(

Similar Messages

Maybe you are looking for