Logic doesn't solo COMP region after update, how fix it ?

Hi everyone
when i press solo button on track where is a comp region, it doesn't work
here's the screenshot
there's someone out htere that has the same problem
thanks

Hello,
I am reading with interest the post about quick time.
I have been having terrible crash trouble due to shock wave plug in..
i posted to another forum about this...
however.. in my frustration, i moved a QT plug in, there were two in the drop down menu in safari, i did a search and found the plug and deleted it... and and now get an error message when i click on a web page..
The page.... "Apple-Quick time attempted to load an Internet plug in named Quick time plugin 7.1.1, but the plug-in failed to load successfully".
I tried to put it back from the trash, howver,, I think i put in in the wrong place. Does any one know the file sequence that the plug in should go into?
Also, I checked the unistaller for QT.
QuickTime 6.5.2 Reinstaller for QuickTime 7.0.1
About this update
The QuickTime 6.5.2 reinstaller will remove QuickTime 7.0.1 from a Mac OS X 10.3.9 system and restore QuickTime 6.5.2.
Note: This reinstaller will only run on Mac OS X 10.3.9.
My QT version is 7.1.1.. meaning that I cannot do this uninstall and reinstall?
Many Thanks.
G5, 1.8GHz Mac OS X (10.3.9) QT Player 7.1.1

Similar Messages

I just update my ipad 3 software to ios 8 , on the setting it was icon down to Cellular called Personal Hotspot , and i lost personal hotspot after updating , how or where i can find it again ?

i just update my ipad 3 software to ios 8 , on the setting it was icon down to Cellular called Personal Hotspot , and i lost personal hotspot after updating , how or where i can find it again ?

Hello SHenoudabak,
It sounds like you are trying to find the Personal Hotspot option in your Settings. You were close. The option is directly under Settings, and not in the Cellular section of Settings:
Go to Settings > Personal Hotspot
Personal Hotspot - iPhone
Thank you for using Apple Support Communities.
All the very best,
Sterling

Why doesn't Wifi Sync work after updating ITUNE?

Hello, I updated my Itune to 11.1.4.62 version.
After updating, WIFI sync doesn't work anymore. I have to connect the cable to my laptop to sync it. Before this upgrade it was working fine.
Now, I have Iphone 5. I run Windows 7.
I did all the recommended trouble shooting.
I disconnected the model and router and reconnected again.
On Summary page the Wifi Sync is CHECKED
I ran the diagnostic, but obviously it says iphone is not detected.
I reseted my iphone.
It still doesn't work.
How can I solve this matter and why does Apple have so many irrtating problems like this?

The passcode screen shows as usual but when I enter the passcode it says the passcode is invalid. This is the same passcode I have had for over a year, so I am sure I entered it correctly. I stopped trying before the phone was disabled though.
I've seen other similar posts but they mostly say connect it to my computer, start itunes, then restore. I haven't synced with itunes in a long time, not sure restoring it would be a good idea. I back up to iCloud much more frequently but can't remember for sure when I last did that either. I'm afraid of losing stuff in the process of restoring it.

Itunes doesn't work on ipad after updating to iOS 6

itunes doesn't work on ipad3 cellular after updating to iOS 6

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Apple TV doesn´t work at all after updating firmware!

After updating firmware Apple TV 3 the only thing that works is the little lamp on the front...it´s steadily blinks. It doesn´t response to remote control, and don´t show up threaded via USB in Itunes for resetting.
Model: Apple TV 3
Itunes: 12.0.1.26
What to do?

The update didn't apply correctly. You need to restore via iTunes.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Make sure you follow the steps correctly (unplug all cables, connect micro usb, then reconnect power)
Connect directly to a computer, not a keyboard port or USB hub. Try a different cable

Iphoto showing the same picture for all my uploaded pictures after update, how do I get my old ones back so I can upload them to websites?

After updating the new iPhoto software in the middle of December, I haven't been able to view all of my pictures that had been on my computer prior to the new software update, It shows the same photo for every single picture, how do I convert it back or reboot it?
THANKS!!

make a temporary backup of the library and launch iPhoto with the Command+Option keys depressed to rebuild the library. Select the options for rebuilding the thumbnails .
OT

IPod Touch doesn't connect to iTunes after Update to iTunes 8.2.1

After installing an update to iTunes my iPod Touch 8GB (w/ 3.0 upgrade) is no longer recognized. My other iPod Nano is recognized. I've tried everything - completely uninstalling iTunes, including manually removing iTunes files, but nothing work. Based on the other posts to this forum this must have something to do with a bad interface between 3.0 and iTunes 8.2.1.

Just wanted to say a big "thank you" for this advice. I have no idea what it means, or what it did, or what was wrong, but I just did it, and it worked!
Basically, last night I updated iTunes from 9.0 to 9.0.1 and I also did the latest Security Update for my Tiger (10.4.11)
This morning when I plugged in my iPod Touch like normal, it didn't mount, or do anything in iTunes. This has never happened before. I tried all sorts. It did however mount like normal on a Macbook Pro which hasn't had the 9.0.1 iTunes update or the latest Security Update.
I was pulling my hair out. I finally found this thread, copied your advice, and hey presto, I'm a happy bunny again!
I don't know what caused it. Was it the iTunes update? The Security Update? Who knows? Fingers crossed it doesn't happen again though.
I'm afraid I don't even know what the iTunes Helper is, or what it does! Do I need to know?
I know this isn't in a current iTunes (9.0) thread, but this is the thread where I got the advice. Does anyone know if this is happening to anyone else after these two particular updates? I'd like any other people affected to know what helped me, and for Apple to know if there is a problem.
Anyway, thanks again.

Midi data doesn't appear in region after recording on a track

I'm using an Alesis SR-16 to trigger Logic drum samples. All seems well as I record on a software track, as I hear the part I'm playing and actually see midi data being transcribed onto the region in the track. However, after hitting stop, there's no data visible at all in the region. It's just a blank box. If I hit play, I hear the track fine, and if I open the piano roll, the data is all there. This is not a problem with the CAPS keyboard. Any thoughts? Can't figure out why it all works fine except for this strange glitch. I'm on Snow Leopard, ps.

The Popper wrote:
This seemed logical, so I experimented with all sorts of zoom settings. I can't see the midi data. And - why would the CAPS keyboard work just fine with a similar part and software intstrument?
At the bottom lower right of the arrange page are the two zoom sliders... move the horizontal one to the right and the vertical one down until the SR-16 track fills the screen..... nothing?
I have/had (haven't looked lately) an SR16 and ages ago recorded every pattern into Logic. I just remember the notes being very short. That's the only thing I think it could be. As I recall you can open the Piano Roll use Apple/A to select all notes... add length to the notes and then they can be seen in the arrange.
Caps Lock key recording is different than a MIDI input recording from third party hardware... apples and oranges.
pancenter-

Deleting files takes hours or doesn't work at all after update to OS X Mavericks

Hi everyone,
My problem: I updated to OS X Mavericks the day the update got available but since then, I have a difficulty deleting files.
Wether it are pictures or music files, sometimes it will delete the file very fast and other times it will either take hours or it won't delete at all (after waiting for hours) and even then to stop the file from going to trash will take a very long time.
I tried doing this while "Secure Empty Trash" was on and off but it stayed the same.
Any help would be much appreciated.
About my Mac: 15' MacBook Pro, version 10.9.1, 2 GHz Intel Core i7, 4 GB 1333 MHz DDR3.

If How to Troubleshoot iSight doesn't help, Reinstall OS X.
Message was edited by: EZ Jim
Mac OSX 10.9

IPhoto doesn't recognize my canon after update to Yosemite

iPhoto doesn't recognize my Canon any more after my update to Yosemite

Have you run Software Update since installing Snow Leopard?
If so and all available updates have been installed, try re-downloading the current iTunes version and re-install it over the existing. No need to delete iTunes first.
http://www.apple.com/itunes/download/

IChat doesn't open at all after update

So I've been reading all the posts about the problems with the video part of iChat not working after the update... but my iChat doesn't open at all. It says iChat in the top bar (Next to the apple) But nothing happens. The buddy list doesn't pop up and all the options under the pull down menus are gray and unclickable. (haha, not sure if thats a word, but we'll work with it ;] ). Anyways, if anyone has any idea how I can go about fixing that, that would be awesome.
Thanks!

If the iChat menu does not give you access to Log a Screen Name in to the AIM servers and the Window Menu does not list any Account/Screen Name then work through this FAQ
http://discussions.apple.com/thread.jspa?threadID=1462798
8:22 PM Thursday; December 4, 2008

N73 doesn't work at all after update

Hi all,
I hope you can help me with this problem. I updated my N73 with the new firmware V4.0735.3.0.2. In the last 40 secs of the update I suddenly got a notification that the connection was lost (battery was full, charger plugged in and data cable connected). I tried all the possible solutions to get the phone working again, but so far....nothing!
I've been trying to get it back to live for a few hours now, but still nothing. Charger has been charging, battery has been removed several times, etc. and it's still dead.
Any help would be really appreciated!

Update: tried options in this thread /discussions/board/message?board.id=swupdate&message.id=18308#M18308 doesn't help. Tried other charger, nothing there either. Seems the phone has really past away. Will contact nokia support center tomorrow, still any help/options will be appreciated!

IPhone 3GS, doesn't find any network after updating to iOS 4.1

I recently updated my iPhone 3GS, and now I can't find any network. This really bothers me as I need a phone. How can I fix this?

Do the following in the order specified:
1. Power your phone off, wait ~30 seconds, then power it back on. If no change, proceed:
2. Reset your phone: Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release(ignore the slide to power off). If no change, proceed:
3. Settings>General>Reset>Reset Network Settings.
If no change after the above, post back.

Phone doesn't ring or alert after update to 7.2. iPhone 5 slow

Suggestions??
This update messed up the ringers and text tone. It actually deleted all the ones that I pursched. All I can say is Thanks for the iTunes and iCloud.My phone decides when it rings or not, mostly not. The phone is slow now especially with text. I now see that the 3G is on alot more than the 4G LTE. My phone hardly ever ran in 3G.
There are more issues than this, but fixing these is my main concern!!

If that's a replacement phone (most likely a refurb), it might be a hardware issue. I would get it looked at. They probably will just give you another one.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group 
Creator of Mac611 - Mobile Mac Support (designed exclusively for an iPhone/iPod touch)

SAFARI doesn't play QT movies after update

We did the 7 to 7.1.2 something update and now safari won't play the movies -- we just get a question mark! It kind of works in other browsers, just not safari. Anyone know how to fix it?

Hello,
I am reading with interest the post about quick time.
I have been having terrible crash trouble due to shock wave plug in..
i posted to another forum about this...
however.. in my frustration, i moved a QT plug in, there were two in the drop down menu in safari, i did a search and found the plug and deleted it... and and now get an error message when i click on a web page..
The page.... "Apple-Quick time attempted to load an Internet plug in named Quick time plugin 7.1.1, but the plug-in failed to load successfully".
I tried to put it back from the trash, howver,, I think i put in in the wrong place. Does any one know the file sequence that the plug in should go into?
Also, I checked the unistaller for QT.
QuickTime 6.5.2 Reinstaller for QuickTime 7.0.1
About this update
The QuickTime 6.5.2 reinstaller will remove QuickTime 7.0.1 from a Mac OS X 10.3.9 system and restore QuickTime 6.5.2.
Note: This reinstaller will only run on Mac OS X 10.3.9.
My QT version is 7.1.1.. meaning that I cannot do this uninstall and reinstall?
Many Thanks.
G5, 1.8GHz Mac OS X (10.3.9) QT Player 7.1.1

Logic doesn't solo COMP region after update, how fix it ?

Similar Messages

Maybe you are looking for