Logic & EW Goliath

Is anyone using Goliath successfully in Logic?
When I change presets in Goliath it crashes logic quite often. Sometimes just opening Goliath crashes it.
This problem's been consistent with all versions of the PLAY engine in Logic 7.0, 7.1, & 7.2.x on 10.4.11 & 10.5.6 on a Mac G5 quad & a Mac G5 dual. I've tested using 3 different interfaces.
Is anyone else experiencing problems like this?

Very droll, but the point is that although I don't use Goliath I might still be able to help with general principles (for example, it seems likely that the problem is due to the size of the plug-in, & there are quite a few general purpose tips for dealing with that).
People don't generally say what their XR-79 actually is, which is okay as far as it goes, but of course it's better if they can give a brief hint (interface/sampler/rifle), along with a description of what other stuff they have, their OS, & their version of Logic. The OP has done nothing wrong as such, but posting a link to a shop is not normally considered the best Forum etiquette. No insult intended to you, Axium.
I like to help, but I don't like to follow links or perform searches if I don't have to. (I will if I must, of course…)
Some people don't like bananas, & some people don't like adverts.
Sorry about the digression, Axium. Neither of us seem to have anything to say about your plug-in, except that it looks pretty resource-hungry. That being the case, there are a few things you could try to prevent the crashing, but it looks like you've already tried lots of different configurations — in which case, it may just be a not very well-written piece of software. Are there any bug reports on the manufacturer's website with respect to Logic?

Similar Messages

  • Logic Studio 32 bit and (AU)East West Quantum Leap Goliath 64bit Question

    I have a Mac Pro 8 core Zeon Harpertown processor's. Its the latest mac Pro with 10 gigs of ram.
    I also have Logic Studio 2 and Logic Express. I just purchased East West Quantum Leap Goliath.
    Here is the major Dilema:
    Mac OS is 64 bit. East West is 64 bit but Logic is 32 bit.
    Won't there be a problem with east west AU being run on 64 bit in a 32 bit application? East West New Engine is 64 bit so its not just the samples its alos the engine.
    The only 64 bit audio sequencing software right now is Sonar. I heard it was 64 bit because of its Video module is also 64 bit.
    Anyhow how is this going to work running an AU that is 64 bit in a 32 bit application?
    Thanks

    Are you sure? There would be absolutely no point whatsoever in releasing a Mac 64-bit plugin, as there are no 64-bit hosts on the Mac, and likely won't be for some time. Logic isn't going fully 64-bit anytime soon.
    You can't run 64-bit code in a 32-bit host, so why would they release a Mac plugin version if it was essentially unusable..? And how would they test it..?
    Edit: I just looked at the press release. It says "32-bit support is also included".

  • East West Goliath with Logic

    Hi There,
    I'm just beginning to build my sound library. Is anyone using Goliath with Logic, and how well does it work? Thanks

    PLAY is not 64 bit while Kontakt is, and in general I don't think PLAY performs nearly as well on mac as Kontakt does (apparently PLAY runs much better on PCs but that doesn't help us). Until PLAY gets an update that lets it run well on macs (including 64 bit) any libraries on that platform are at a disadvantage to ones on Kontakt.

  • Space designer and Reverb with EWQL Goliath samples

    I'm currently using Logic 9 for sequencing.
    Alot of the samples I use in recording are from EW-QL Goliath as a plugin for Logic.
    Given the 'Play' engine has a reverb facility and other kinds of articulations and effects you can apply is there much use to using Space designer in Logic? I'm not sure if Play Engines is vastly superior or not.
    Would it be better to simply set up the reverb within the Play engine and then record to in Logic OR record an unaltered sample (e.g. violin) from Play and then add reverb using space designer/ Logic's other reverb plugins?
    Perhaps using them both in conjunction even?
    I am writing alot of orchestral music at the moment so trying to decide on how to apply reverb to my tracks at the moment.
    Thanks.

    This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
    There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
    So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
    And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
    Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way.

  • Horrible Logic performance on Macbook Pro

    I've got a brand new 2.4 mbp with 2gb ram, latest osx and latest logic.
    Playing just one sampler instrument often sends one of the cores into overdrive. Often I get spikes which sometimes settle down again, but still hanging at 50-60% FOR ONE SAMPLER VOICE! Playing a chord with a string patch maxes out a core!?!? I usually get similar problems with ES2 and other plugs.
    project is in 24/48, 256 buffer, build-in audio
    My old 2gz dual core imac behaved fine with L8.
    I am not impressed.
    Anyone any similar problems, or tips on how to diagnose this?
    As I said, the Macbook is new and had a fresh install.

    Hello there.
    Guess we have the same problem and it might be that the solution is 10.5.3 as a bad update!
    I am running Logic 8 on two machines: One MacBook Pro 2.33 Intel Duo Core and a Dual Core MacPro G5. before Yesterday everything was fine. Yesterday I have upgraded the Desktop machine from 10.5.2 to 10.5.3. The Laptop runs fine, the Desktop not. I use the same plugin (Eastwest Goliath) same sound and the Desktop kicks away, shows immediately an Overload the Mac Book Pro is just half stressed with the same sound. 2 days ago (when the Desktop machine had also 10.5.2) I had no problems at all. I had this once when I upgraded and since that time I never upgrade two machines at the same time, just filter possible errors. From my point of view the Apple developers take too much care of i tunes and i phones and i works and i books. They should be more careful with you the user. They have to be fast in developing and since 2005 this creates problems.
    What can you do? Reinstall an older Leopard? No I simply would wait if possible 2-3 weeks and wait for 10.5.4. or Logic 8.0.3 :-(( This will hopefully fix problems, but for sure generate some new ones we can discuss about I stay with my Laptop on 10.5.2 and make minimal music on the big one
    As a little help for the moment: Go down to 16/44.1 and raise buffer to 512, if you can do so.
    This will give you a chance to play the Logic instruments and survive until the next upgrade comes.
    Best
    Z

  • Logical GR in Third Party Process

    Hi Friends
    There is logical GR involved in third party process. What if we do not want to trigger it?

    very useful thraed for your Qn-
    [stock not updating after doing MIGO (gr) for third party sales |stock not updating after doing MIGO (gr) for third party sales;
    BR
    Raj

  • Logical databse in repeat

    Hi
    I call in loop logical database by FM LDB_PROCESS in different parameters but only first step is return ok
    next return error subrc = 1 LDB_NOT_REENTRANT
    How to init this calling in second step?

    Hi
    Firstly why you are calling the LDB using FM instead mentioned that in Program attributes and call that using GET statement ?
    Regards,
    Sreeram

  • Logical command in ABAP.....Urgent

    Hi,
      i am pretty new using ABAP program so i neeed help urgently. i am trying to move a file on the application server from one directory to the other and i was using the open dataset function to do that. but the file i am trying to move is pretty big and because i am using internal table to store, it is causing problems with the space.
      i have consulted the basis guys and they have managed to create a logical file for copying from one directory to the other on the application server. to help you furthter. i am enclosing the mail sent to me.
    I have created a logical command which should copy the file from one location to the other but you need to pass it the source dir and file name and the destination dir and file name.
    The logical command is ZCOPY and uses cmd /c copy
    Copies one or more files to another location.
    COPY [/V] [/N] [/Y | /-Y] [/Z] [/A | /B ] source [/A | /B]
         [+ source [/A | /B] [+ ...]] [destination [/A | /B]]
      source       Specifies the file or files to be copied.
      /A           Indicates an ASCII text file.
      /B           Indicates a binary file.
      destination  Specifies the directory and/or filename for the new file(s).
      /V           Verifies that new files are written correctly.
      /N           Uses short filename, if available, when copying a file with a
                   non-8dot3 name.
      /Y           Suppresses prompting to confirm you want to overwrite an
                   existing destination file.
      /-Y          Causes prompting to confirm you want to overwrite an
                   existing destination file.
      /Z           Copies networked files in restartable mode.
    The switch /Y may be preset in the COPYCMD environment variable.
    This may be overridden with /-Y on the command line.  Default is
    to prompt on overwrites unless COPY command is being executed from
    within a batch script.
    the problem now is i have no idea about how to use the logical command. can any one help me.
    Thank you,
    Ravi.

    If memory is not an issue, then there should be no reason why this should not work.
    report zrich_0001.
    parameters: d1 type localfile default '/usr/sap/TST/SYS/Data1.txt',
                d2 type localfile default '/usr/sap/TST/SYS/Data2.txt'.
    data: itab type table of string with header line.
    start-of-selection.
    * Read old file
      open dataset d1 for input in text mode.
      if sy-subrc = 0.
        do.
          read dataset d1 into itab.
          if sy-subrc <> 0.
            exit.
          endif.
          append itab.
        enddo.
      endif.
      close dataset d1.
    * Write to new file
      open dataset d2 for output in text mode.
      loop at itab.
        transfer itab to d2.
      endloop.
      close dataset d2.
    * Delete the old file
      delete dataset d1.
    Regards,
    Rich Heilman

  • Logical Level in Content Tab

    Hi,
    What is the use of Logical Level under Content Tab in Logical Table Source?
    Need more information, docs related to this
    Thanks,
    Satheesh

    Hi
    This logical level is useful for level bases metrics.It shows the levels in your hierarchy.We can give the level in this and in the report it shows the data for that level only.
    See this lnk, http://gerardnico.com/wiki/dat/obiee/measure_level_based
    Thanks
    Don

  • Logical Systems in Business Services

    Hi
    In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
    i.e. to do
    MyBusServ1, Z_LS_1 
    MyBusServ2, Z_LS_1
    is not possible ?
    When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
    Thanks
    Damien

    Thanks for the replies
    Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
    Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
    Thanks
    Damien

  • Logical Database in Abap Objects

    Hi to All
    I want do it a program report using a Logical Database.
    Is this possible ??? But when I make a GET <node>, occurs the following error:
             "" Statement "ENDMETHOD" missing.  ""
    I'm doing the following:
    CLASS MONFIN IMPLEMENTATION.
           METHOD TRAER_DATOS.
                   GET VBRK.
           ENDMETHOD.
    ENDCLASS.
    Please, somebody tell me how I use the logical database in Abap Objects.
    Thank you very much
    Regards
    Dario R.

    Hi there
    Logical databases whilst of "some use" are not really part of OO.
    If you want to use a logical database in an abap OO program I would create a special class which just does the get data from your DB and pass this either at record or table level.
    Techniques such as GET XXXX LATE aren't really part of any OO type of application since at Object Instantiation time you should be able to access ALL the attributes of that object.
    As far as OO is concerned Logical databases are a throwback to "Dinosaur Technology".
    Since however modules such as SD and FI are still heavily reliant on relational structures (i.e linked tables etc)  then there is still some limited life in this stuff but for OO try and solve it by another method.
    If you really must use this stuff in OO then do it via a FMOD call and save the data in a table which your method will pass back to your application program.
    You can't issue a GET command directly in a method.
    Cheers
    Jimbo

  • Logical level in Fact tables - best practice

    Hi all,
    I am currently working on a complex OBIEE project/solution where I am going straight to the production tables, so the fact (and dimension) tables are pretty complex since I am using more sources in the logical tables to increase performance. Anyway, what I am many times struggling with is the Logical Levels (in Content tab) where the level of each dimension is to be set. In a star schema (one-to-many) this is pretty straight forward and easy to set up, but when the Business Model (and physical model) gets more complex I sometimes struggle with the aggregates - to get them work/appear with different dimensions. (Using the menu "More" - "Get levels" does not allways give the best solution......far from). I have some combinations of left- and right outer join as well, making it even more complicated for the BI server.
    For instance - I have about 10-12 different dimensions - should all of them allways be connected to each fact table? Either on Detail or Total level. I can see the use of the logical levels when using aggregate fact tables (on quarter, month etc.), but is it better just to skip the logical level setup when no aggregate tables are used? Sometimes it seems like that is the easiest approach...
    Does anyone have a best practice concerning this issue? I have googled for this but I haven't found anything good yet. Any ideas/articles are highly appreciated.

    Hi User,
    For instance - I have about 10-12 different dimensions - should all of them always be connected to each fact table? Either on Detail or Total level.It not necessary to connect to all dimensions completely based on the report that you are creating ,but as a best practice we should maintain all at Detail level only,when you are mentioning any join conditions in physical layer
    for example for the sales table if u want to report at ProductDimension.ProductnameLevel then u should use detail level else total level(at Product,employee level)
    Get Levels. (Available only for fact tables) Changes aggregation content. If joins do not exist between fact table sources and dimension table sources (for example, if the same physical table is in both sources), the aggregation content determined by the administration tool will not include the aggregation content of this dimension.
    Source admin guide(get level definition)
    thanks,
    Saichand.v

  • Logical System in IDOC-XI scenario

    Hi,
         I need help to understand few things in IDOC-XI scenario, could any one help me in this regard.
        we use Adapter specific identifiers to map services, we have following type of identifiers 1) Sys.ID & Client No.  2) Logical System. 
    my questions are
    a) Are we use Logical System in B to B scenario ?
    b) Are we use LS in reference to the SAP system or Non SAP system ? if a non SAP system....how a non SAP system send an IDOC and why a non SAP system receive an IDOC ( conversion is possible in XI ) ?
    Thanks and Regards
    Mahesh.

    Hay Kumar,
    Logical systems can also be used for SAp sytems wich are not installed yet as a virtuall placeholder.
    a) yes. if on of your business is a non sap system or a propritery system that you developed yuo'll ue LS.
    b) non SAP system can send and recieve IDOCs. so it's possiable to get an IDOC from a system and turn it into an RFC for SAP or get an IDOC from an SAP system and then turn it into something else for another system.
    Have a Good One,
    Uri Lifshitz.

  • Logical Profiles in ISE 1.2.1

    I´m having trouble understanding the Logical Profiles. 
    What I understand from the user guide: http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html#58510
    for those to lazy to read: 
    You can use the logical profile in an authorization policy condition to help create an overall network access policy for a category of profiles. You can create a simple condition for authorization, which can be included in the authorization rule. The attribute-value pair that you can use in the authorization condition is the logical profile (attribute) and the name of the logical profile (value), which can be found in the EndPoints systems dictionary.
    so I thought that meant that I can group Different Profiles (Apple Iphone, Ipad, Ipod) together into a logical group e.g. "BYOD_Idevice" and use this logical profile in the Authorization. 
    But I can´t choose this freshly created Logical Group in the Authorization Condition. As for the fact, I can´t choose this logical group ANYWHERE. 
    Leaning back and thinking about it - it somehow makes sense. In the Authorization, you don´t pick Profiles, you choose Identity endpoints. So whats the point about the logical profiles? I was hoping to clean/lean up my authorization rules with them. But for what would I use them else? 
    Or is this a bug in ise 1.2.1? Not sure if I should call tac about this, or if I´m just not getting it :D
    Thanks alot for your help!  

    Nice username! :)
    So yes, you are correct, the logical profiles would allow you to group different type of dynamically profiled devices and then reference that profile in your authorization rules. However, you won't see those logical profiles under the "Identity Group Details" section. You will need to leave that field blank. Instead, you need to look in the "second" condition box: expression > Endpoint > LogicalProfile
    Hope this helps!
    Thank you for rating helpful posts!

  • Logical Database in Webdynpro

    Hello,
    I have a program in R/3 that is based on a logical database. I don't want to have to write the program all over again in Webdynpro.
    Is there a way to use the logical database in Webdynpro for ABAP.

    Basically WDA calls a FM and then the following help is a good starting point:
    "Calling a Logical Database Using a Function Module"
    http://help.sap.com/saphelp_nw04/helpdata/en/64/237f8cd43711d1950b0000e8353423/content.htm
    Kindly close the thread and award appropriate a points to the answer given.
    Sergio

Maybe you are looking for