Logic Express 7.2 and Hypersonic 2

When Logic Express comes up it checks for AU Units and has a problem with Hypersonic 2. Here's the report that the AU Validation Tool gives.
http://www.digimixstudios.net/hypersonicerrorreport.txt
If I tell Logic to go ahead and use Hypersonic as a AU Unit it still works.
I went back to GarageBand 3 and Hypersonic has no problems.
Anyone else run into this.
MacMini Mac OS X (10.4.2)

I have discovered one thing, after deleting preferences,etc.: it seems that everything start because my evolution USB keyboard is connected with usb to powerbook. I have tried also with another USB Edirol keyboard, and it's the same. Instead, if I connect the keyboard with MIDI the 1082 works again. Strange because: 1) before update, usb and firewire were connected and everything was fine, 2) now in the same usb port a guitar rig board is connected and the 1082 works as usual... ?!?!?!?!

Similar Messages

Logic Express - I bought and installed Logic Express 7.2.3 way back when... Now I would like to move ti to my new MacBook Pro - how do I do it please?

Please can someone advise how I reload an old version of Logic Express on a new Mac? Many thanks

Hello KarmicCC,
If you still have access to the old Mac, you might try using Migration Assistant to transfer applications to the new Mac.
How to use Migration Assistant to transfer files from another Mac
http://support.apple.com/kb/HT4889
However, Logic Express 8 and earlier are PowerPC applications which are no longer supported (in 10.7 and 10.8).
Cheers,
Allen

Midi file Logic Express 7.2 and Sibelius 4.10

Hi All
I am using Logic Express 7.2 to export a midi file then importing it into Sibelius 4.10, this works fine on G5 mac but not on an intel iMac.
The Sibelius error is "There was a problem opening the midi file: Not a format 0 or 1 midi file"
I have contacted Sibelius support and they have said this is a Logic problem.
My own research has shown that if the logic file has only one track and I export a midi Sibelius will open it but not a multiple track file. As mentioned above G5 macs have no problem whatsoever.
Has anyone come across this or have any suggestions please. Thanks

I have discovered one thing, after deleting preferences,etc.: it seems that everything start because my evolution USB keyboard is connected with usb to powerbook. I have tried also with another USB Edirol keyboard, and it's the same. Instead, if I connect the keyboard with MIDI the 1082 works again. Strange because: 1) before update, usb and firewire were connected and everything was fine, 2) now in the same usb port a guitar rig board is connected and the 1082 works as usual... ?!?!?!?!

Logic Express, Reason 4 and a MacBook Pro.

I'm looking to get a MacBook Pro (15" @ 2.4 Ghz C2D) and have been writing in Reason 4 pretty exclusively on our current project. In the past I was using Cubase SX2, Reason and a PCI Audio card. So, I'm looking to find a Intel Compatible audio application and most likely not going to get the latest version of Cubase SX (or whatever it's called now). Nice application but I'm ready to move to something else.
A couple of questions... Will logic work nicely with the MBPro? Is the 15.4" screen tolerable with Logic Express? I'll still have the Dual 1.8 G5 w/ 4 GB of memory but wan to try and be totally portable. Also, for a simple two channel input how is the quality on the 1/8" jack? Should I look for a nice 2 channel input/output USB audio card?
That is all my questions for now.
Thanks.
Bill

I may have mispoke - I need to be able to transfer pictures from my Samsung phone to my Macbook Pro - I have had them talk with the bluetooth but that only worked once. I would like to be able to use a cord and have the Macbook recognize the phone - how do I do that?

HT1349 First of all, I have just purchased a iMac and I tried installing my Logic Express 9.0 and it won't work. Gives me an error message. I searched the internet and found i need to update it to run with Lion. Tried to download but my SerNum doest work.

Can anyone help me please. I tried installing my Logic Express 9.0 but it states I need an update. Ok.. great. So i tried to download it via apple.com but my serial number doesn't work. I can't even schedule an appointment with them because I am in Italy now. Can anyone show me how I can fix this proble. Either download the update thtat allows my iMac to run Logic express 9 or get apple.com to help me. Either or would be appreciated.! Thank you!

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Should i use Logic Express for Mixing and Mastering?

recording an LP with GarageBand. are express and pro very close in what they offer ? express good enough for mixing and matering an LP? would like to keeps costs down. thanks SJM

It can be done, but you will need to do a lot of reading and make many mixes to get it down. Mastering is not something you can learn overnight. It'll take you many hours of trial and error just to get something that is OK. A pro mastering engineer has years of experience and thousands of dollars worth of high quality gear. With a lot of practice, you can get something fairly decent, but it won't be like a real pro job would be.
As Hangtime suggested in the GB forum, do a google search and you'll get a lot of sites with articles on the subject of mixing and mastering.

How to create an ABAP Query with OR logical expression in the select-where

Hi,
In trying to create an ABAP query with parameters. So it will select data where fields are equal to the parameters entered. The default logical expression is SELECT.. WHERE... AND.. However I want to have an OR logical expression instead of AND.. how can I attain this??
Please help me on this.. Points will be rewarded.
Thanks a lot.
Regards,
Question Man

Hi Bhupal, Shanthi, and Saipriya,
Thanks for your replies. But that didn't answer my question.
Bhupal,
You cannot just replace AND with OR in an ABAP QUERY. ABAP QUERY is a self generated SAP code. You'll just declare the tables, input parameters and output fields to be displayed and it will create a SAP standard code. If you'll try to change the code and replace the AND with OR in the SAP standard code, the system will require you to enter access key/object key for that particular query.
Shanthi,
Yes, that is exactly what need to have. I need to retireve DATA whenever one of the conditions was satisfied.
Saipriya,
Like what I have said, this is a standard SAP code so we can't do your suggestion.
I have already tried to insert a code in the ABAP query (there's a part there wherein you can have extra code) but that didn't work. Can anybody help me on this.
Thanks a lot.
Points will be rewarded.
Regards,
Question Man

How do you use Logical Expressions in the RTF?

How do you use logical expressions such as "and", "or" when you want to do conditional printing of XML data in the RTF?
For example:
if (conditionA and conditionB) then...
Regards,
Smita

Thank you Sir! - I had something else wrong in the expression, but the error message I was getting was a bit misleading and sent me down the wrong path.
Thanks again, and best regards:)

Ultrabeat logic express 8

Hi there
I recently posted a topic about logic express 8 drums and got no reply,maybe i should have mentioned ultrabeat Anyway i just want to assign channel strips to the drum parts i.e Kick main,snare 1/2 etc.On the ultrabeat interface i know how to select the drum parts,then what do i do?
Just completely forgotten!!
Cheers Cal

Maybe nobody answered to our previous post because this is LE7 forum and not LE8!
BTW, you have to open the Multi version of Ultrabeat and the complete procedure is well described here: LogicExpress_8_Instruments_andEffects.pdf.
cheers
rob

Pro Logic Express

Just brought a new i7 imac. Brought Pro Logic Express 7 online and now my computer will not allow the programme to open up?
Not too sure what to do.

Hi,
That's a bit of a disappointment...
From memory I think that Logic Express 7 was not compatible with Intel Macs...
Perhaps you can return it and get Logic Express 9...

Logic Express 7.2 don't start, always hangs!

Hi,
Logic Express 7.2 and the newest GarageBand is not working with my dual 2.7 G5. Even after the migration from my dual 2.5 G5 to this computer, these apps are not running. Before on my dual 2.5 G5 I also had no luck to get these apps to work. Restart won't help, now I quit every application and always tried to start these apps, because I thought of an application conflict. But this doesn't help. Next I treid the steps provided by some users here in the forum - like deleting plist, dupliate loops and index folders. Nothing worked. Seems the apps always hang at the CoreAudio init. Someone have a advice for me?
Thx,
Marty

I had the same problem. You have an expired software synth, demo software, unsupported VST or AU or something that is causing Core Audio to not load. The offending file should be in library/application support/logic - clear out REX Shared Library, Rewire, or any third party, i.e. Native Instruments etc. software support files.
I'm not sure what was causing the hang for me as I removed a bunch of this stuff at the same time but Logic and Garageband came back after some spring cleaning.
Be patient and thorough and you'll figure it out.

Logic Express (7.2) Installation problem

Hi, I had an iBook running Logic Express 7.1 and recently upgraded to a MacBook so I sent away for the 7.2 crossgrade, which arrived today. I put in the first disc which ran through the installation and prompted me to insert the content dvd, however the MacBook doesn't seem to recognise the content dvd and spits it out after a minute, leaving me to have to cancel the installation!
What's happening!? Anyone had this problem or know how to fix it?
Cheers

Maybe your content DVD is damaged?
I have had this problem with other software (not Logic) where a CD or DVD is damaged.
Can you insert it in to another computer? Sometimes a DVD will work fine on one computer, but not another.
If you can get another Mac to recognize it, you may be able to use Disk Utility to create a disk image of that DVD and move it to your MacPro via a network, or even install it across a network which I've never tried.
If it is damaged, you'll have to call Apple who I'm sure will send you a replacement. If you're anywhere near an Apple store, take your MacPro and the disks to the genius bar and let them get you running.

How do i import 3rd party VST plug-ins into Logic Express 8???

I downloaded some vst plug-ins for logic express online somewhere and the instructions to install them says to go to library/audio/plug-ins/vst and to just drop them in there. i do that, but then when i drop them in there and then start up Logic, they're no where to be found in the program
is there another way you are suppose to import vst's?

You can't use VST plugins straight in Logic. The format recognized is AU (Audio Units) but there is a workaround using a program called VST to AU Adapter.
http://www.fxpansion.com/index.php?page=5
cheers
rob

Problem importing Garageband songs into Logic Express

Hi I have spent around 4 hours looking for an answer to this problem so hopefully it has'nt been answered before apolgies if it has.
I am trying to import a Garageband Song into Logic Express (7.1) it appears to import it to Logic but when finished it reads file corrupt not a Logic File.
I followed the tutorial opened the GB song and followed the instructions on how to import but I cant import it to Logic without the above message coming up.
Any ideas?
I'm using a MacBook Pro with 10.4.9 on it.Logic is version 7.1 (Is there a known bug when importing?)
Thank you if you can help.
KB.

Hi KB,
Welcome to the forum!
the answer is within your question;
your machine needs the universal Logic express (7.2)
and your GB's probably GB 3.
That's the reason you can open the files.
If you bought version 7 "new"(from the reseler)
ask for version 7.2, as you can't buy crossgrade anymore.
(until logic sells a new one)
"You just bought diesel and your machine's not run on it"
rule number 1: You should Allways look for system requirements and software versions compability!
Cheers,
Jorge

Logic Express 7.0.1 Update/Upgrade

Hello,
I have Logic Express version 7.0.1 and never did get the "paid" upgrade to Logic Express version 7.1 (or was it version 7.2?). I'm wondering what the latest version of Logic Express 7 is and how I would go about getting the update/upgrade to 7.1 (or 7.2)?
I use GarageBand most of the time and don't use Logic Express a lot so I don't really want to fork out the cash to move to version 8 but it would be nice to see it updated somehow. Logic Express 7.0.1 seems to work fine on 10.5.6 for me, by the way.
I just can't seem to find any info on Apple's website about the version 7.1 (or 7.2) update/upgrade.
Can anyone shed any light on this?
Thanks so much,
Gerard

I don't see any problem with trying LE7 in a Leopard environment. Usually newer OS have backwards compatibility with older software. However, just in case, have all your valuable data backed up before upgrading. With all bases covered you can easily revert to the old setup if something goes wrong under Leopard. The only thing you can lose is time spent to re-install Tiger and LE7.

Logic Express 7.2 and Hypersonic 2

Similar Messages

Maybe you are looking for