(logic express 8) My controller assignmets are completely wrong, they wont map to the tracks I tell them to

Im trying to map the faders and knobs on my uc-33 to a template with 3 audio tracks and 4 software instrument tracks, the output 1-2 and the master. each track has 2 sends which im also trying to map to the top two rows of knobs.
sometimes it works fine, and for a glorious few minutes my mappings are good.
then it goes wrong:
all of a sudden my first uc33 fader moves my fourth logic fader, or my first uc33 panning knob moves the second logic panning knob, or some variation of this. the assignments stay consistent in terms of order, but shifted. As if the whole set is shifted right. usually the output and master assignments dont screw up, just the audio & SWI tracks. if my first hardware uc33 fader shifts to my second logic fader then the first hardware fader will control nothing. if i assign all the faders and knobs to channel levels, pans, and busses they will all shift together.
I am doing this all in expert mode. my classes are all "channel strip" and under the "channel strip" menu i have tried both the "fader bank" setting and the "Audio" or "Software Instrument" respectively.
MY uc-33 is on global channel 1, my mpd24 is on gc 2, korg triton le on gc 3, and a korg microX on gc 4. I wont to use them all for different things, but i cant even get my <no zone> mixer assignments to work!
I can see no reason why this would happen, what could I have possibly done? is my program just glitching?

I don't have an answer for you but your question inspired my question, which is can you send me a template type of file that would allow me to route both
Track 1 will be my mic input 1
Track 2 will be my mic input 2
both from y Firestudio Project
but I want them both to use my external effect processor through my
Send 1 & 2 unfortunately my effects processor is stereo and the Sends/Return 1 is mono. Ideally I'd be willing to give up my Return 2 as the other half of the stereo return... but I can't figure out how to route any of this.
I've found several references that say it's possible to setup external effect processors using my Firestudio Project but everytime I try to configure this using the mixer/aux/send functions within Logic it does not work.
My problem is that I need to use external sound effects for our live mixes to avoid the latency problems when applying live internal effects to our vocal tracks.
Your advice on this issue would be much appreciated.

Similar Messages

After installing iphoto 9.5 some of my projects are completely or partly empty after regenerating, how can I get them back?

After installing iphoto 9.5 some of my projects (photobooks) are completely or partly empty after regenerating, how can I get them back?

Define "everything" because if you've tried everything then your last recourse is:
1 - restore your backup copy of your iPhoto Library created just prior to your Yosemite upgrade or
2 - Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.

Scandinavian currencies are completely wrong

I'm currently trying the trail of numbers and noticed that the currencies for the scandinavian countries are completely wrong, which is very anoying seeing as I live in Norway. Numbers lists following our currencies as NKr (Norway), DKr (Denmark) and SKr (Sweden). This isn't the international method of displaying them. It should be NOK (Norway), SEK (Sweden) and DEK (Denmark). I don't understand how apple made this mistake when these are all international methods of displaying out currency.

Hello
The problem is not really a Numbers one.
In fact it's at the system level that Apple uses a wrong list of currencies acronyms.
It seems that they don't know that there is an ISO 4217 list.
At this time, the only thing we can do is:
go to "Provide Numbers Feedback" in the "Numbers" menu and explain them that it would be fine if Mac OS was complying the ISO 4217 rule.
I wish that we will be numerous to do that.
I don't remember it but there is a link to report this kind of things not only for a specific app but for every products.
It would be fine if some one is able to pass it here so we will be able to report also thru this way.
Yvan KOENIG (from FRANCE samedi 3 novembre 2007 17:06:57)

'Some images are missing because they were deleted from the document'

Hi,
I created a document in Pages v5.2 last week and have just opened it and received the following message:
'Some images are missing because they were deleted from the document'
When I try and replace the missing images I get the following message:
'The image "filename" couldn't be inserted.'
When I try and reimport the original image I get the following message:
'The image "filename" couldn't be inserted. This image is of an unsupported type.'
If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
If I insert the original image into a blank Pages document it goes in no problem.
I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
Alex

I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
Toolbar > Media insert
Insert > Choose jpg into document
Text Box image fill
Shape image fill

Logic Express 7.0.1 What are my options?

I´m stuck! Have been inactive for some time (cancer) and after upgrading my iMac operating system up to OS 10.6.8, my old Logic Express 7.0.1 does not open. Upgrade 7.1 does not work. In December I found and bought from the On Line Store an upgrade for Logic Express 6, 7, 8, but a wrong shipping address sent the parcel back to Apple which credited my card and in stead of sending this back to me said they don´t carry this item any more.
Now I don´t seem to find anything that brings me back into business. What are my options????

I don't see any problem with trying LE7 in a Leopard environment. Usually newer OS have backwards compatibility with older software. However, just in case, have all your valuable data backed up before upgrading. With all bases covered you can easily revert to the old setup if something goes wrong under Leopard. The only thing you can lose is time spent to re-install Tiger and LE7.

Where are my sound module preset names in the track list?

I've been using Logic since version 2.5 and, since I have several MIDI sound modules whose sounds I'm perfectly happy with, I am now using those sound modules with Logic 8.
But having just upgraded to 8 from 7, I've discovered something I think is missing, which is a bit of an annoyance.
In all previous versions of Logic, if you set up a instrument in the Environment for a MIDI sound module and then added all the preset names when you set up the bank/program change commands, when you select a preset from the track list in the Arrange window, the name in the track list changed from the name of the instrument to the name of the preset.
For example, the name would change from 'Fantom XR' (the name I'd called the instrument in the Environment) to 'PNO SoTrue' (the name of the preset) in the track list when I selected that preset via Logic.
However, in Logic 8, when I select a preset, the name on the track list now stays as 'Fantom XR' (or whatever the name of the instrument is) and doesn't change to that of the preset.
Given that I use six MIDI modulss, keeping track of the sounds by having the trak list name change to that of the presets was really useful for keeping track of what was what.
Have I just missed something with how to do it, or is a permanent change? I really hope not.

No, it's still there, but the interface has changed.
Right-click on a track and select "Configure Track Header"
In the box that comes up, enable the checkbox under "Names" and next to it (the second flip menu), select "Software Instrument Setting Name".
Now the program names in your multi-instruments are displayed in the manner you have been accustomed to.
As ever, save this stuff in your autoload to always have you own configs available.
You have some options there in that the two flip menus determine the first and second displayed track name, so you can set up how you like - it's more flexible than earlier versions of Logic.

Yesterday everything was syncing up fine with my Ipod Nano 6th gen. Today I'm getting conflicts and my songs and audio books are completely gone from my Ipod. The message says that it can not be played on this Ipod. They played before.

I've been using my Ipod for over a year now without issue.   Today I downloaded some new audio books from Itunes and when I tried to sync up, it would not work and all of the books and music that I had on my Ipod are gone from my Ipod. They still show up in my Itunes library.   The only thing I see that is different is that now there is a "cloud" symbol next to my library content.   This makes no sense to me. Please help.

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

My Iphone is on, but home and lock buttons are completely unresponsive. I can swipe the screen but i cannot do anything else. help me please :(

I was jus trying to download a few new apps when it said I had no storage left, so i went to delete some things, and after i was done, i tried to press the home button to go home. It didn't work, but yet if I clicked it the 3 times it would invert my colors still. I then tried to lock my phone or turn it off and neither worked.
I can still swipe on the settings screen but nothing else. The AssistiveTouch won't even take me back to my home screen. HELP

Try holding the Home and Power button together for at least 15 seconds or until the Apple logo comes on. Then let go and wait for the phone to reset and restart. This will take a few minutes and you will not lose any data.
If this does not work put your phone in recovery mode and connect it to iTunes. Then restore the phone to factory settings and then restore from backup. This will wipe your settings and data but if you have made a recent backup it should not be a lot.

How do i get my ringtones back on my phone, they are in the itunes library but they wont sync to the phone

how do i get my ringtones back on my iphone, they are in the itunes library but not on the ph

Is it selected in iTunes? Is the ringtones longer than 35 secs?

FF thinks PDF files are binary files, doesn't give me the option to open them

I just got a new Mac, running OSX 10.7 Lion. I downloaded Firefox because I like it better than Safari. It's Firefox 7.0.1.
Aside from the fact that I can't figure out how to get all my bookmarks from the old mac to the new one, a really annoying thing is that I can't get the new Firefox to recognize PDF files as Acrobat documents. It thinks they are "binary" files, and the only option I have is to save them to disk.
I looked at the Applications preferences, and there is no entry for PDF files. I can't seem to create one. I checked the help and it says that to add a download preference you find the type of file you're interested in, click to download it, and tell it "open with" the application you want. But I don't get that option with PDF files, it doesn't let me tell it what to open it with, the only thing it allows me to do is either save to disk or cancel.

I use Internet Explorer for my browser.
A/A - I have reinstalled the latest version of AdobeReader.
When I click an attachment to view it, the first option I am given is to 'save' the file, and then the next pop up message gives me the option to either 'open' or 'view file'. The thing is that I don't want to 'save' each file to my laptop to allow me to see it. I want to be able to merely 'open' the file to view aithout actually saving it first.

Where are my bookmarks in Apple maps after the iOS 8 update?

What happened to my bookmarks in Apple maps now that I have upgraded to iOS 8?

They will show up when you are in the field to Seach or Enter an Address:
Bookmarks for maps in iOS 8 missing
When you are getting Directions between 2 locations, however, they don't show up (for me); just start typing the name of the Favorite or Recent or Contact, and choices will appear.

How do i open my idvd project after I have saved it, when I look at the list of projects they are listed but they will not open the letters are like grey not black and it won't open please help thanks

I cannot open my saved idvd files the letters are grey not black and they won't open can anyone help?

Do the files you're trying to open have this extension: .dvdproj ? How are you attempting to open them?
OT

I downloaded an album on Itunes. The songs play on my IPAD but on my IPOD they wont play. the album is there but all the songs are grayed out.

I downloaded an album on Itunes. The songs play on my IPAD but not my IPOD. They are on the IPOD but they are grayed out.

- Delete and redownload by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- If you can't delete
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My ipod has completly knackered it's self and the touch screeen has completely packed in, wont work on the computer when i plug it in also i cannot switch it off or on standby. What should i do?

Well lately my ipod has just started playing up basicly the touch facility has started to not work it will not let me turn it of or on standby aswell when i plug it in to my computer so i can factory reset incase it has a virus on it but it does not show on the screen also i tried drayning the battery and then recharging in hope it will work but no it still does not work. I am really stuck and I need my ipod as soon as possible please help

hard reset the ipod. IN THIS ORDER. plug in the ipod, turn the ipod off, open itunes, press the sleep button (top) for 3 seconds, continue to press the sleep button and also (at the same time) press the home button. Contunue to do this until 3 seconds after the screen flashes. Then release the sleep button and continue to press the home button until the ipod shows up in itunes. do a factory reset.

My watched and downloaded tv shows still appear on my iPad, not on my computer. how do i delete them from the iPad. They don't take up storage, but the titles are there and they have links to the cloud

How can I delete watched and unwanted TV shows from my ipad. They don't show on my mac, they don't show up in the useage tab. But when I click on videos, the tv shows show up with links to the cloud. How can I delete?

The question is not only how to to hide them, but also how to mark them as watched!

(logic express 8) My controller assignmets are completely wrong, they wont map to the tracks I tell them to

Similar Messages

Maybe you are looking for