Logic Express with 10.5

Just upgarded to 10.5. I have Logic with MachFive and Stylus RMX installed and working, but I'm having trouble with Symphonic Orchestra. It seems as though I can't install it (because 10.5 doesn't support classic). Any ideas on how I can get Symphonic Orchestra installed and working?

Try using SheepShaver or starting up into Mac OS 9; if neither of those works, you cannot at this time.
(29845)

Similar Messages

Digital outs in Logic Express with 828 or 002 rack

Can someone tell me if it is possible to use the digital ins and outs of either my MOTU 828 or DIgi 002 rack with LE? It's no where as easy as Pro tools or DP!!

Forgive my naivety... when you say "digital outs" are you talking about SPDIF? Does this mean I can't run Logic Express with an interface connected to the SPDIFs on my G5? Only Pro? Or am I off the mark?
Thanks!

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

Logic Express with MBox

Can someone please help.Can I use Logic Express with an MBox and if so how.

Hey Roma,
welcome to the forum!
Assumming you had the drivers installed, (in Logic) go to the audio menu>audio hardware & drivers>Driver (change from built in audio to Digidesign HW (MBox), Relaunch, that's it.
((Click on (say) audio 1 (to select track) Press R to arm it and you shoud now have sound level on metters. Don't forget the I/O in logic is audio 1 = input 1, audio 2 = input 2, audio 3 = input 1, audio 4 = input 2 and so on (by default))
Kiddly regards,
Jorge

Can I use logic express with my Macbook

I just got a macbook and i was wondering if I can use Logic express or pro on it??

yes!
it of coourse depends what you want to do with it - but yes!
by all acounts logic express and pro will run very well on the new macbooks.
I'm using pro on my old powerbook - just about manage to use it live and it's slow but useable to get ideas down onto and am using an intel imac as my main studio computer with logic pro 7.2.3 - it's essentially the same as a macbook except it doesn't have integrated graphics and it has a faster hard disk which does make a difference. Apart from that i'm sure your new macbook would toast my powerbook in terms of performance.
Be sure to get the intel version of logic (7.2 and above) as an older "ppc" version may run but is not supported and would probably run very slowly.
Enjoy!
Rounik

Problems Using Logic Express with Alesis Multimix 8

Hi,
Does anybody have any experience of using the Alesis Multimix 8 USB with Logic Express 7.0.1? As far as I can tell the software is set up OK. The problem is that there is an awful amount of noise present on both the input and the output (sounds like inordinatley loud dither). The problem is also present on Garageband and iTunes but not with Cubase LE (bundled in with the Multimix).
I have searched and searched the internet for drivers for the Multimix but with no luck. At the moment I am just using the "core audio" USB codec drivers that are built in as I seem to have no other option.
Does anybody have any suggestions before I go ahead and buy another external audio interface? (got my eye on the new Behringer F-CONTROL AUDIO FCA202)
Rev. G Rock
PS I am running OS X (10.3.9) on a G4 iBook (1.33 GHz, 1.25 GB RAM) and have done all the updates available for Logic Express 7.0(.1)
iBook G4 Mac OS X (10.3.9)

OK I understand it's helpful to others to post solutions should you find them so here goes:
It would seem that the problem is with the built in CODEC used by OS X. You can update using the drivers available at http://www.usb-codec.com
I used the demo version to see if it solved the problem which it did. However you need to buy the software to get rid of the annoying beep every 30 secs on the demo version. well worth it to get my hardware working properly though.
Rev. G Rock

Logic Express with Oxygen 25 - no sound

I am trying to use an Oxygen 25 controller with logic express. In Logic I can see that it is receiving a midi signal but I can not get any sound from the midi controller to come out. There is sound from everything else, but not the midi.
I feel like there is an easy answer (or they are not compatible), but a little help would be nice.

Hi,
you have to use the Controller with a software instrument track that has a software instrument selected as "input". A Controller like the Oxygen does not make a sound of it's own, but merely sends MIDI data to Logic, which then uses this data to trigger it's software instruments.
Fox

Logic Express with not Recognise Amplitube 3 as a Plug-in

I cannot get Logic Express 9 to recognise Amplitube 3 as a plug-in. What do I need to do to make get it to use Amplitube. I'm new to Logic Express and I'm enjoying the on-board amp sims, but I really love my Amplitube.

Hopefully you will find this thread of help... In particular the very last post by gtrman...
https://discussions.apple.com/thread/2438700?start=0&tstart=0

Advice needed on sharing/registering logic express with 2 users

Me and my mate, have got into audio production, and i am wondering if we can BOTH register the same logic program.
Is there a specific limit on how many users can be on one single program? Surely logic must allow you at least 2 users, say incase you have a mac at home, and one in a seperate studio.
All replys will be greatly appreciated.
Thanks in advance
Dan
amd athlon xp Windows XP Pro

No Dan,
I'm affraid you can't do that, it's highlly Illegal,
You can't register one licence to two persons,
You can install it on two of Your machines, (not your mate's one)
for the reason that You can only use one at the time.
Otherwise, it will be a paradise, everyone would find software mates
and split the price and I would be on Pro instead of LE! :o)
I believe you can have LE as an academic (if you are one or your mate) for a fraction of the price.
Anyway, welcome to the forum, I wish that you have all the fun with LE and make nice music with it.
Kindly Regards,
Jorge

How to have logical expression with value '*' not wildcard '*'

Hi ,
    I have requirement where i have to filter records based on a field with value EQ '' but strangely it is taking wildcard '' in the production system. In the Dev system it is taken as exact value '' but behaves as a wild card in prod system. Please advice a sure shot change which will work in both the environment as i am on a strict deadline for this. Will a usage of CONSTANT work ? Constant : val   type c value "".
Regards
Tashi

Hi,
Check the bellow code which will help you in using wild card in searcg help.
DATA: ls_selopt         TYPE ddshselopt,
        ls_t006a          LIKE t006a.
TYPES:lv_range          TYPE char45.
CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET'
      EXPORTING
        parameter         = lc_old_mat
      IMPORTING
        value             = lv_dummy
      TABLES
        shlp_tab          = shlp_tab
        record_tab        = record_tab
        selopt_tab        = lt_sel_opt
      CHANGING
        shlp              = shlp
        callcontrol       = callcontrol
      EXCEPTIONS
        parameter_unknown = 1
        OTHERS            = 2.
    IF sy-subrc <> 0.
      EXIT.
    ELSEIF NOT lv_dummy IS INITIAL.
      lv_old_filled = 'X'.
    real backend system ?
      MOVE 'I'          TO ls_old_mat_ranges-sign.
      MOVE 'EQ'         TO ls_old_mat_ranges-option.
      MOVE lv_dummy(10) TO ls_old_mat_ranges-low.
      APPEND ls_old_mat_ranges TO lt_old_mat_ranges.
    ELSEIF NOT lt_sel_opt[] IS INITIAL.
      lv_old_filled = 'X'.
      LOOP AT lt_sel_opt INTO ls_sel_opt.
      no select in case of 'all systems'
        IF ls_sel_opt-low EQ '*'.
          DELETE lt_sel_opt.
        ELSE.
        wildcards
          MOVE-CORRESPONDING ls_sel_opt TO ls_old_mat_ranges.
          APPEND ls_old_mat_ranges TO lt_old_mat_ranges.
        ENDIF.
      ENDLOOP.
    ENDIF.
Regards,
Goutam Kolluru.

Hard drive options for Logic Express with a Mac Mini

I'm considering getting a Mac Mini to use for recording video from a medical endoscopic camera. The reasons for choosing a Mac Mini are 1) low cost 2) small size and 3) no fans - blowing dust around an operating theatre can be a risk (therefore even if cost wasn't an issue, the fans would preclude other mac models).
I've been looking at the spec of a Mac Mini - they have 5400 rpm hard drives and only 1 firewire 800 port. I'm using a Canopus ADVC 55 to convert analogue video to DV which connects using Firewire.
Will the built in hard drive be ok, or should I consider replacing it with a 7200 rpm drive, or get an external Firewire drive. PResumably, with only 1 firewire port on the Mac Mini I would need to find either a hard drive with 2 firewire ports to chain devices (which I've heard can be a problem) or perhaps get a firewire hub (similar problem?).
Currently I'm using a MacBook Pro with an internal 7200 rpm drive and this works fine (except when it gets low on hard drive space and I get dropped frames, leading to complete loss of the recording...).

Thanks - I just did a quick search and there are some Firewire 800/400 'bilingual' hubs around at reasonable prices.
I'm tempted to try the Mac Mini server, and perhaps have the 2 drives in a Raid 0 configuration. I could then have it backing up to a Time Capsule overnight (to mitigate the risk of using Raid 0).
Recording to an external drive might be useful though - as it would be a quick way of moving the data to a Mac Pro for compression for archiving. I find moving 10-20GB files over 802.11n to be very time consuming.
I'll certainly bear the dust in mind in terms of the risk to the Mac Mini (I've seen PC's having failed power supplies because the air inlets have been clogged with dust). My main concern however would be the risk of infection due to the fans causing air movement. There is an enclosed space it could be located, not great for cooling though.

Garageband 4 compatible with new logic express...

I have started some tracks in garageband 4 and unable to import into logic express. Error message states that I need to update logic express with a newer version. I am running a the latest version of both products.

Read the thread:
http://discussions.apple.com/thread.jspa?threadID=1091312&tstart=0
WH

Recording a live DJ mix WITH LOGIC EXPRESS

Hi
I really need to know how to set up and record through logic express with my new MAC. I used to use Soundforge with a PC but now am completely confused!
A bit of advice would be appreciated!

1. Launch Logic
1b. go to Logic preferences and select your audio input source.
2. file- select 'new'
3. a window will pop up - audio or instrument - choose audio
4. choose 'stereo' , I expect.
5. Hit the record button and choose where you files are going to be kept
6. record your thing
7. In the master track that you probably see, choose 'bounce' Take note of the start and end point numbers. You would think when you tell it to bounce it would do that but - no - Logic needs to know bounce from where to where? Choose the file name and bounce away!! Good luck.

Can't open any files in Logic Express 8

Hi out there,
I just installed Logic Exp. 8 out of the box. Runs nice as far as i can tell, but has a major bug with me: It won't open any projects or other files.
If i click the Projects in the Finder, they will open just fine. But I can't open them in Logic.
Import of Files into a project works fine.
Ideas anyone? Update anyone (wink, wink to apple)?
Cheers,
Fox

You may be having the same problem I observed, and I think it may be a bug.
After upgrading to Logic Express 8, when I save projects they appear as a folder rather than a file in the finder, with the .logic suffix. Previous versions saved projects as a .iso file. On another machine I upgraded Logic Pro to Logic Studio 8, and here projects are saved as a .logic file. My guess is the .logic file created is supposed to be a file for both Logic Pro and Express, with package contents under OS X ... but for some reason this is appearing as a folder when created by Logic Express, with the package contents visible ... so you can't double click on anything to open them.
Has anyone else seen this? is there a workaround or is this a bug?
In the meantime, note that you can launch the Logic Express .logic 'folders' by dragging the and dropping the entire .logic folder onto the Logic Express icon in the dock.

Logic Express not working on mountain lion!

i am having problems with logic express 9.0.0 which is not running on mountain lion 10.8.2.
i have made an attept to try and get newer updates but before it gets anywhere this pops up
   " An eligible Logic Express Version was not found in
     the Applications Folder. This Update requires Logic
     Express version 9.0 or higher. "
(i do not have the logic disks at hand)
          The message that pops up when i attempt to open logic
               " you cant use this version of the
                application "logic express" with this
               version of OS X.
          you have "logic express" 9.0.0 "
please help!!

Hi
First, you are going to need v9.1.7 or later with Mountain Lion (http://support.apple.com/kb/HT5421)
Second
To get the updaters to work several things MUST be correct:
The Logic Application must be named "Logic Pro" or "Logic Express" (depending on which type you are working with) with NO Additional spaces or numbers in the name.
The application must be at the root level of the Applications folder (and NOT anywhere else).
CCT

Logic Express with 10.5

Similar Messages

Maybe you are looking for