Logic For Subtracting A Given Output In ALV Report
Hi,
I am working on a report in which i am using ALV Concept and there a problem arise i.e. in ALV Report output which always subtotals having values in addition only and i want to know is there any way through which subtraction can also be performed within the output of a ALV Report.
Please provide some guidelines for it.
Regards,
Rickky NV
Hi,
Thanks to both of you for your value able response. Actually, i am working on customer aging analysis report in which there are 2 columns i.e. debit and credit in which these both values are stored in 2 separate lines and i have to display the difference of them in the 3rd column and facing the problem.
Is it possible to display the required data of it in 3rd column of it?
Regards,
Ricky
Similar Messages
-
Output of ALV report as attachment in email
Dear all ,
I would like to send output of ALV report as attachment in email.
i already written code for this using FM SO_NEW_DOCUMENT_ATT_SEND_API1.
I can able to send list output as HTM format. But I want to send ALV report output
As a attachment. How can I do this .please explain
Thanks in advance
Regards
ManoharHello,
U can sent like this.
Check this report
REPORT ZV_SEND_MAIL .
TABLES: EKKO.
PARAMETERS: P_EMAIL TYPE SOMLRECI1-RECEIVER
DEFAULT '[email protected]'.
TYPES: BEGIN OF T_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
END OF T_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF T_EKPO INITIAL SIZE 0,
WA_EKPO TYPE T_EKPO.
TYPES: BEGIN OF T_CHAREKPO,
EBELN(10) TYPE C,
EBELP(5) TYPE C,
AEDAT(8) TYPE C,
MATNR(18) TYPE C,
END OF T_CHAREKPO.
DATA: WA_CHAREKPO TYPE T_CHAREKPO.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
*START_OF_SELECTION
START-OF-SELECTION.
* Retrieve sample data from table ekpo
PERFORM DATA_RETRIEVAL.
* Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
*END-OF-SELECTION
END-OF-SELECTION.
* Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
* Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Example .xls documnet attachment'
'XLS'
'filename'
CHANGING GD_ERROR
GD_RECIEVER.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
SELECT EBELN EBELP AEDAT MATNR
UP TO 10 ROWS
FROM EKPO
INTO TABLE IT_EKPO.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
* Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
CON_TAB TYPE X VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
* con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
* con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
* Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
* Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
* Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
* Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
* Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
* Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
* Populate zerror return code
LD_ERROR = SY-SUBRC.
* Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
* Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find attached a list test ekpo records'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
If useful reward.
Vasanth -
How to apply List box for multiple selection of rows in ALV report ?
Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subashhi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container,
gt_fieldcat TYPE lvc_t_fcat,
gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE. "pbo OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
ENDMODULE. "pai INPUT
*& Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'T517A'
CHANGING
ct_fieldcat = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
WHEN 'SLART'.
*is the first list box
ls_fcat-drdn_hndl = '1'.
ls_fcat-outputlen = 15.
MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
ls_fcat-drdn_hndl = '2'.
ls_fcat-outputlen = 15.
MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM. "build_fieldcat
*& Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
EXPORTING
is_layout = gs_layout
CHANGING
it_fieldcatalog = gt_fieldcat
it_outtab = gt_outtab.ENDFORM. "ALV_OUTPUT
*& Form dropdown_table
text
--> p1 text
<-- p2 text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
EXPORTING
it_drop_down = lt_dropdown.ENDFORM. " dropdown_table
*& Form build_layout
text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM. " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM -
How to make checkbox field inactive in the output of ALV report.
Dear All,
I am having one ALV report in whose output there are checkboxes against each record. Example: the output columns of my ALV report are:
Checkbox, Sales Document No, Billing Document No.
Now, my requirement is that if for the Sales Document No there exists any Billing Document No in the output then the Checkbox should be inactive but if the Billing document coloumn is empty for a particular Sales Document No then only the Checkbox field should become active.
Kindly guide me on how to make this checkbox field inactive.
Waiting for your reply.
Warm Regards,
N.JainHello,
Follow the below steps:
1.Define as--> GS_STATUS TYPE SLIS_STATUS,
2.check layout check box fieldname is not initial.
then set the status according to your logical conditions
GS_STATUS-FLG_CHECKBOXES_ACTIVE = 'X'
Hope this would help you.
Let me know your feedback.
Regards,
Raju -
Logic needed to print blank line in alv report
hi experts,
can anyone please tell me the logic for this
i want to logic one is
1) in alv report contains
a set of data contains 100 (5 datas)
and a set of data contain 200(5 datas)
i want to have one coloum containing serial no
ex for 100 i want to move no '5' to one coloumn ,but it should display only ones not for all 5 records.
same for 200 also i want to move 7 to this ,it should b displayed ones
i used for at new command alos its not working
2)suppose for particular date, 200 related records is not there
it should conatin blank line,displaying 'NIL'.
SO THE OPT FROMAT MUST BE
MATNR DOCNO
100 1000
100 1000
100 "
100 "
100 "
200 2000
200 "
200 "
200 "
200 "
SUPPOSE 200 RECORD IS NOT THERE THE OPT SHLD B
100 1000
100 1000
200 NILArun,
1)
If you are using the function module REUSE_ALV_GRID_DISPLAY, then use the internal table it_sort with a row for the column where you want the suppression of repeated values.
2)
If you are using the function module REUSE_ALV_GRID_DISPLAY, then simply ensure that your internal table t_outtab has the rows that you need containing 'NIL'.
John -
Need to remove space for a field when displayed in ALV Report
Hi,
I have material field of length 18, but the content is only 10 char. I need to remove the extra space when it is displayed on ALV Report.
Is there any option in ALV field catalogueuse statement condense.
condense zmatnr.
also giv output lenth of alv column as 10. -
For all classes used in the alv reports.
we need the list of required classes used in alv reports this urgent .
please help me.Hi Navid,
Check <b>SLIS Package/Dev.Class for node Classes</b>,
here u will find all required <b>classes for ALV including ALV Hierarchical,AVL Tree, ALV HTML.</b>
Classes.
CL_ALVHT_HTMLINPUT-> ALV: HTML Input (Control Proxy)
CL_ALVHT_HTML_PAGE-> ALV HTML Page
CL_ALVHT_HTML_TEMPLATE-> ALV: HTML Templates
CL_ALVHT_TAGSTREAM-> ALV
CL_ALVHT_UI_ELEMENT-> ALV: HTML User Input Element
CL_ALV_BDS-> BDS Access and Data Retention
CL_ALV_CHANGED_DATA_PROTOCOL-> Message Log for Data Entry
CL_ALV_DD_DOUBLE_LISTBOX-> Management Class for two D&D List Boxes
CL_ALV_DD_LISTBOX-> D&D List Box
CL_ALV_EVENT_DATA-> Changing Data Container for Events
CL_ALV_EVENT_TOOLBAR_SET-> ALV Context Menu
CL_ALV_GRAPHICS-> ALV Graphic (Integration with GFW)
CL_ALV_GRAPHICS_CU-> Customizing of ALV Graphics
CL_ALV_LISTBOX_DRAGOBJ->
CL_ALV_OI BDS-> Access and Data Retention
CL_ALV_TABLE_CREATE-> Dynamic Creation of ALV Data Table
CL_ALV_TREE_BASE-> Basis Class ALV Tree Control
CL_ALV_VARIANT-> ALV Variant Management
CL_GUI_ALV_GRID-> ALV List Viewer
CL_GUI_ALV_GRID_BASE-> Basis Class for ALV Grid
CL_GUI_ALV_TREE-> ALV Tree Control
Regards,
Raghav
Message was edited by:
Raghavendra L -
Displaying output in ALV Report..
Dear Guru's
I have a Tipical Problem in Producaiton. when iam executing the report in Development Server it is working fine.
but when I executing the same report in Producation server , first time it is given blank output(only layout) and once come back and execute for the same inputs , it is giving correct output.
if we freshly start executing .. first time it is not giving any output. but once come back to selection-screen and executing it. giving output correctly..
what may be the reason?...Please do the needfulll
UR's
GSANAHi,
It might be some problem pertaining to some time delay or lag, or a refresh problem.
So save your code once again activate it and shut down your saplogon and after couple of minutes log in again.
I faced a similar problem, it was some lag problem only.
Edited by: Harini Gopinath on Nov 13, 2009 6:19 PM -
Editing fields on output of alv report format
Dear friends,
I created on report in alv format but user wants to edit the field on the output of that format also it's effect is on the next field should br done.
e.g. if in first field is 10 in next field user edit and enter the value 20 then automatically next field will appered as a 20 * 10 = 200 i.e what to do to collect that 200 in the next field automatically.
how to do it?
Thanks ,
Vishal Bhagwat,Hi,
Refer these standard alv programs
BCALV_EDIT_01 Switch on and off the ready-for-input status of
BCALV_EDIT_02 Define ready-for-input status at cell level
BCALV_EDIT_03 Verification of modified cells
BCALV_EDIT_04 Delete and append rows
BCALV_EDIT_05 Checkboxes
BCALV_EDIT_06 Dropdown Listbox at Column Level
BCALV_EDIT_07 Dropdown Listbox at Cell Level
BCALV_EDIT_08 Integrate Non-Standard F4 Help
BCALV_FIELDCAT_TEST Edit field catalog online
BCALV_FULLSCREEN_GRID_EDIT
BCALV_GRID_EDIT
BCALV_GRID_EDIT_DELTA Example Report for F4 Help of the ALV Grid
BCALV_GRID_EDIT_DELTA_APPL
Regards,
Prashant -
Plz write coding for this .....alv report
to list all data from tables zfm_kfz and zfm_kmvrg i need alv program
list output is kfznr geraet kostentraeger bezeichnung tuvdatummmyyyy asudatummmyyyy kmstand histo reifen username
fileds in the zfm_kfz table is kfznr, geraet kostentraeger bezeichnung tuvdaummmyyyy asudatummmyyyy kmstand histo reifen username
fields in zfm_kmvrg is kfznr, kostentraeger kmstand
i n the selection screen beteen block use radio button is ALL FIRMLA -
( 4 characters).
this is the requirement somebody help me in this.
plz send coding in alv......Hello Narenda
The following coding shows the simplest form of an ALV list. The more advanced version would be to use a dynpro containing an ALV control (class CL_GUI_ALV_GRID).
REPORT zus_sdn_alv_sample.
TABLES: zfm_kfz.
TABLES: zfm_kmvrg.
DATA:
gt_list TYPE STANDARD TABLE OF zfm_alv_structure.
NOTE: Define in the dictionary a structure that contains all fields
required for your ALV list.
Selection-screen: begin of definition
parameters:
p_...
select-options:
s_...
Selection-screen: end of definition
START-OF-SELECTION.
Selection of the combined data from both tables into GT_LIST,
e.g. by using an INNER JOIN select
SELECT * FROM zfm_kfz...
INNER JOIN ...
INTO CORRESPONDING FIELDS OF TABLE gt_list
WHERE ...
Sorting as required
SORT gt_list BY ...
Now the simplest way to create an (non-interactive) ALV list
is to use function module REUSE_ALV_GRID_DISPLAY_LVC.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = 'ZFM_ALV_STRUCTURE' "Name of DDIC structure
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT_LVC =
IT_FIELDCAT_LVC =
IT_EXCLUDING =
IT_SPECIAL_GROUPS_LVC =
IT_SORT_LVC =
IT_FILTER_LVC =
IT_HYPERLINK =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT_LVC =
IS_REPREP_ID_LVC =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_EXCEPT_QINFO_LVC =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_list
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The package SLIS is full of sample reports which explain various options of ALV list (and other controls). Look for reports beginning with BCALV_...
Also have a look at transaction SE83 (Reuse Library). You will find the transaction under SAP menu -> Tools -> ABAP Workbench -> Overview.
Regards
Uwe -
How to send output of alv report as mail
Hi Experts,
I Have retrieved data from USER tables and i need to send the output of the list through mail.
could you please help me in completing this task
Moderator message: FAQ, please search for previous discussions of this topic.
Edited by: Thomas Zloch on Mar 16, 2011 9:41 AMHi,
You can send the report data as an either excel sheet ot txt attachment in side the email. for this you can use the function module . for this refer to program BCS_EXAMPLE_7 . -
Logic for quality clearence to warehousing cycle time report
Hi,
I am developing a report on it,i know that Movement Type 101 and Y11(Transfer with in plant) is used for it. I want to know which tables or tcodes to be used for it for making the flow of the report (i dont want to use MSEG and MKPF tables).Hi,
MB1A,MB1B are the T codes where u can do these Transactions.
MBLNR is the Docuemnt number field which .So use this field and click on WHERE USED LIST IN SE11 T code u will get other alternate tables.
If u dont use MSEG I can understande but i think there is no issues in using MKPF
Regards -
Sample ALV report required for FI module
Hello friends,
I am develoing ALV report for FI module for that i need some sample ALV report. If someone have than please send it to me.
Thanx & Regards,
Rahul TaleleHI,
SEE THE SAMPLE REPORT
Fringe Benefit Tax Report
Program Name :
Object ID :
Functional Analyst :
Programmer :
Start date :
Initial CTS :
Description : FRINGE Benefit Tax
Includes :
Function Modules :
Logical database :
Transaction Code :
External references :
Modification Log
Date | Modified by | CTS number | Comments
| | | Initial Version *
REPORT ZFI_FBT NO STANDARD PAGE HEADING LINE-SIZE 255.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF
T_BSIS,
BUKRS TYPE BUKRS, " Company Code
HKONT TYPE HKONT, " General Ledger Account
GJAHR TYPE GJAHR,
BELNR TYPE BELNR_D, " Accounting Document Number
BUDAT TYPE BUDAT, " Posting Date in the Document
BLDAT TYPE BLDAT, " Document Date in Document
XBLNR TYPE XBLNR1, " Reference Document Number
BSCHL TYPE BSCHL, " Posting Key
DMBTR TYPE DMBTR, " Amount in Local Currency
AUFNR TYPE AUFNR_NEU, " Order Number
NONFBT TYPE DMBTR, " non fbt amount
SUBFBT TYPE DMBTR, " subject to fbt amount
ZFI_FBT TYPE ZFI_FBT, " Qualifying amount.
AMOUNT TYPE DMBTR,
FBTPAY TYPE DMBTR,
ZFI_PAY TYPE ZFI_PAY,
END OF T_BSIS,
T_IT_BSIS TYPE STANDARD TABLE OF T_BSIS.
TYPES : BEGIN OF T_FRINGE,
ZFI_HKONT TYPE HKONT,
ZFI_FBT TYPE ZFI_FBT,
ZFI_PAY TYPE ZFI_PAY,
END OF T_FRINGE,
T_IT_FRINGE TYPE STANDARD TABLE OF T_FRINGE.
DATA : GIT_FRINGE TYPE T_IT_FRINGE,
GWA_FRINGE TYPE T_FRINGE.
DATA : GIT_BSIS TYPE T_IT_BSIS,
GWA_BSIS TYPE T_BSIS.
DATA : G_HKONT TYPE HKONT,
G_BUDAT TYPE BUDAT,
G_AUFNR TYPE AUFNR_NEU.
FIELD-SYMBOLS : <BSIS> TYPE T_BSIS.
DATA : G_REPID TYPE SY-REPID,
GIT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
GWA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GT_EVENTS TYPE SLIS_T_EVENT,
GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
GS_LAYOUT-ZEBRA = 'X'.
GS_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
CONSTANTS : C_50(2) TYPE C VALUE '50'.
SELECTION SCREEN DEFINITIONS
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_BUKRS TYPE BUKRS DEFAULT 'H901' OBLIGATORY.
SELECT-OPTIONS : S_HKONT FOR G_HKONT,
S_BUDAT FOR G_BUDAT.
*PARAMETERS : P_AUFNR TYPE AUFNR_NEU DEFAULT '000000100001' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
EVENTS
INITIALIZATION.
INITIALIZATION.
G_REPID = SY-REPID.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
PERFORM GET_ZTABLE. " get data from ZFII_FRINGE table
START-OF-SELECTION.
START-OF-SELECTION.
PERFORM GET_DATA. " get data from BSIS table
IF NOT GIT_BSIS IS INITIAL.
PERFORM GET_PERCENTAGE. " to get the percentages from table ZFII_FRINGE
PERFORM CHK4_INTERNAL. " checking for the posting key wheather th document is reversed
" and checking wheather internal order is FBT or non-FBT
ENDIF.
END-OF-SELECTION.
END-OF-SELECTION.
IF NOT GIT_BSIS IS INITIAL.
PERFORM DISPLAY. " display ALV GRID display
ENDIF.
*& Form get_data
text
--> p1 text
<-- p2 text
FORM GET_DATA .
SELECT
BUKRS
HKONT
GJAHR
BELNR
BUDAT
BLDAT
XBLNR
BSCHL
DMBTR
AUFNR FROM BSIS
INTO TABLE GIT_BSIS
WHERE BUKRS EQ P_BUKRS AND
HKONT IN S_HKONT AND
BUDAT IN S_BUDAT.
IF SY-SUBRC NE 0.
MESSAGE I000(ZFI) WITH 'No data exist'.
EXIT.
ENDIF.
ENDFORM. " get_data
*& Form display
FORM DISPLAY .
PERFORM BUILD_FIELD_CATALOUGE.
PERFORM GET_EVENTS.
PERFORM DETERMINE_SORT_SEQUENCE.
PERFORM SUB_COMMENTERY_BUILD.
PERFORM ALV_DISPLAY.
ENDFORM. " display
*& Form build_field_catalouge
FORM BUILD_FIELD_CATALOUGE.
DATA : L_POS TYPE I.
L_POS = 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'HKONT' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'GL Account' " Column Name Text
' ' " Datatype
'X' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'BELNR' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'Document No.' " Column Name Text
' ' " Datatype
'X' " Key?
'1' " Row Position
'X' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'BUDAT' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'Posting Date' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'BLDAT' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'Docu. Date' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'XBLNR' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Ref. Doc. Number' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'DMBTR' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Gross Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'SUBFBT' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'FBT Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'NONFBT' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Non FBT Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'ZFI_FBT' " InTab Field Name
'GIT_BSIS' " InTab Name
'12' " Output Length
'Percentage' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'AMOUNT' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Qualifying Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'FBTPAY' " InTab Field Name
'GIT_BSIS' " InTab Name
'12' " Output Length
'FBT payable' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
ENDFORM. " build_field_catalouge
*& Form init_field_catalog
text
FORM INIT_FIELD_CATALOG USING P_GIT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV
PV_POS LIKE GWA_FIELDCAT-COL_POS
PV_FIELDNAME LIKE GWA_FIELDCAT-FIELDNAME
PV_TABNAME LIKE GWA_FIELDCAT-TABNAME
PV_OUTPUT LIKE GWA_FIELDCAT-OUTPUTLEN
PV_SELTEXT LIKE GWA_FIELDCAT-SELTEXT_M
PV_DATATYPE LIKE GWA_FIELDCAT-DATATYPE
PV_KEY LIKE GWA_FIELDCAT-KEY
PV_ROW LIKE GWA_FIELDCAT-ROW_POS
PV_HOTSPOT LIKE GWA_FIELDCAT-HOTSPOT
PV_EMPHASIZE LIKE GWA_FIELDCAT-EMPHASIZE
PV_KEY_SEL LIKE GWA_FIELDCAT-KEY_SEL
PV_JUST LIKE GWA_FIELDCAT-JUST
PV_SUM LIKE GWA_FIELDCAT-DO_SUM.
DATA: LT_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
LT_FIELDCAT-OUTPUTLEN = PV_OUTPUT.
LT_FIELDCAT-COL_POS = PV_POS.
LT_FIELDCAT-FIELDNAME = PV_FIELDNAME.
LT_FIELDCAT-TABNAME = PV_TABNAME.
LT_FIELDCAT-SELTEXT_M = PV_SELTEXT.
LT_FIELDCAT-KEY = PV_KEY.
LT_FIELDCAT-ROW_POS = PV_ROW.
LT_FIELDCAT-HOTSPOT = PV_HOTSPOT.
LT_FIELDCAT-EMPHASIZE = PV_EMPHASIZE.
LT_FIELDCAT-KEY_SEL = PV_KEY_SEL.
LT_FIELDCAT-DO_SUM = PV_SUM.
LT_FIELDCAT-JUST = PV_JUST.
LT_FIELDCAT-DATATYPE = PV_DATATYPE.
APPEND LT_FIELDCAT TO P_GIT_FIELDCAT.
CLEAR LT_FIELDCAT.
ENDFORM. " init_field_catalog
*& Form alv_display
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
i_grid_title = 'Fringe Benefit Tax'
I_GRID_SETTINGS =
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GIT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = GIT_BSIS
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " alv_display
*& Form chk4_internal
text
--> p1 text
<-- p2 text
FORM CHK4_INTERNAL .
LOOP AT GIT_BSIS ASSIGNING <BSIS>.
IF <BSIS> IS ASSIGNED.
IF <BSIS>-BSCHL = C_50.
<BSIS>-DMBTR = <BSIS>-DMBTR * -1.
ENDIF.
IF NOT <bsis>-aufnr IS INITIAL.
IF <BSIS>-AUFNR = '000000100000'. " P_AUFNR.
<BSIS>-SUBFBT = <BSIS>-DMBTR.
<BSIS>-AMOUNT = ( <BSIS>-SUBFBT * <BSIS>-ZFI_FBT ) / 100.
ELSE.
IF <bsis>-aufnr = '000000100020'.
<BSIS>-NONFBT = <BSIS>-DMBTR.
ENDIF.
ENDIF.
<BSIS>-FBTPAY = ( <BSIS>-AMOUNT * <BSIS>-ZFI_PAY ) / 100.
ENDIF.
ENDLOOP.
UNASSIGN <BSIS>.
ENDFORM. " chk4_internal
*& Form get_ztable
text
--> p1 text
<-- p2 text
FORM GET_ZTABLE .
REFRESH : GIT_FRINGE.
SELECT HKONT
ZFI_FBT
ZFI_PAY
FROM ZFI_FBT_DETL
INTO TABLE GIT_FRINGE
FOR ALL ENTRIES IN s_hkont
WHERE HKONT IN S_HKONT.
CHECK SY-SUBRC EQ 0.
SORT GIT_FRINGE BY ZFI_HKONT.
ENDFORM. " get_ztable
*& Form get_percentage
text
--> p1 text
<-- p2 text
FORM GET_PERCENTAGE .
CLEAR : GWA_FRINGE.
LOOP AT GIT_BSIS ASSIGNING <BSIS>.
IF <BSIS> IS ASSIGNED.
READ TABLE GIT_FRINGE INTO GWA_FRINGE WITH KEY
ZFI_HKONT = <BSIS>-HKONT
BINARY SEARCH.
CHECK SY-SUBRC EQ 0.
<BSIS>-ZFI_FBT = GWA_FRINGE-ZFI_FBT.
<BSIS>-ZFI_PAY = GWA_FRINGE-ZFI_PAY.
ENDIF.
ENDLOOP.
UNASSIGN <BSIS>.
ENDFORM. " get_percentage
*& Form determine_sort_sequence
text
--> p1 text
<-- p2 text
FORM DETERMINE_SORT_SEQUENCE .
DATA : LS_SORT TYPE SLIS_SORTINFO_ALV.
LS_SORT-SPOS = 1. " Sort order
LS_SORT-FIELDNAME = 'HKONT'.
LS_SORT-TABNAME = 'GIT_BSIS'.
LS_SORT-UP = 'X'.
LS_SORT-SUBTOT = 'X'. " Sub total allowed
APPEND LS_SORT TO GT_SORT.
CLEAR LS_SORT.
ENDFORM. " determine_sort_sequence
*& Form get_events
text
--> p1 text
<-- p2 text
FORM GET_EVENTS .
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = GT_EVENTS.
READ TABLE GT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO GT_EVENTS.
ENDIF.
READ TABLE GT_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO LS_EVENT-FORM.
APPEND LS_EVENT TO GT_EVENTS.
ENDIF.
ENDFORM. " get_events
*& Form sub_commentery_build
text
--> p1 text
<-- p2 text
FORM SUB_COMMENTERY_BUILD .
DATA: LS_LINE TYPE SLIS_LISTHEADER.
DATA : L_LOW TYPE CHAR10,
L_HIGH TYPE CHAR10,
L_DATE TYPE CHAR25.
CONCATENATE S_BUDAT-LOW6(2) '.' S_BUDAT-LOW4(2) '.' S_BUDAT-LOW+0(4) INTO L_LOW.
CONCATENATE S_BUDAT-HIGH6(2) '.' S_BUDAT-HIGH4(2) '.' S_BUDAT-HIGH+0(4) INTO L_HIGH.
CONCATENATE L_LOW ' - ' L_HIGH INTO L_DATE.
***header
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'Fringe Benefit Tax'.
APPEND LS_LINE TO GT_LIST_TOP_OF_PAGE.
***Selection
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Company Code'.
LS_LINE-INFO = P_BUKRS.
APPEND LS_LINE TO GT_LIST_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Posting Date'.
LS_LINE-INFO = L_DATE.
APPEND LS_LINE TO GT_LIST_TOP_OF_PAGE.
ENDFORM. " sub_commentery_build
FORM TOP_OF_PAGE *
When TOP-OF-PAGE will be fired , this event will be called and it
will use the contents of i_list_top_of_page for output in the header
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. "top_of_page
*& Form USER_COMMAND
Called from within the ALV processes. Currently, '&IC1' is used to
process the hotspot and display the document 'picked' by the user.
FORM USER_COMMAND USING PV_UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CLEAR : GWA_BSIS.
CASE PV_UCOMM.
WHEN '&IC1'.
READ TABLE GIT_BSIS INTO GWA_BSIS INDEX SELFIELD-TABINDEX.
CASE SELFIELD-SEL_TAB_FIELD.
WHEN 'GIT_BSIS-BELNR'.
IF NOT GWA_BSIS-BELNR IS INITIAL.
SET PARAMETER ID: 'BUK' FIELD GWA_BSIS-BUKRS,
'BLN' FIELD GWA_BSIS-BELNR,
'GJR' FIELD GWA_BSIS-GJAHR.
CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
ENDIF.
WHEN OTHERS.
ENDCASE.
WHEN OTHERS.
ENDCASE.
CLEAR : GWA_BSIS.
ENDFORM. "user_command
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD_FULLSCREEN' OF PROGRAM 'SAPLKKBL'.
ENDFORM. "SET_PF_STATUSENDFORM. "SET_PF_STATUS
AWARD POINTS IF USEFUL.... -
Deletion of extra space in ALV report output
Hi Experts,
I have one issue where i have to delete the extra space in the output of ALV report.
Please let me know the possible way... Its very urgent.
Thanks in advance
SiriHi Siri,
Try these following steps in your report...... i think, it will lead you to solve your problem.
1. Give output length of alv column as 10.
2. OUTPUTLEN is there in Field catalogue
3. "gt_layout TYPE lvc_s_layo" - use this one field col_opt
Reward if useful.
Regards,
Harish -
Hi all,
I have below output in alv report.
matnr 101_102 121_122 123_124
10000 23 34 45
10001 34 34 456
if i m clicking on 23 in combination of 121_122 and 10000 then i want to see detail for 121_122 and if i m clicking on 34 combination of 101_102 then i want to see detail according to it.
plz help me. its urgent.
thanks in advance.Check the below report and do compare and modify the report as per your req.
REPORT ZZ_22038_22098_002 NO STANDARD PAGE HEADING LINE-SIZE 650
MESSAGE-ID ZZ_9838 .
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Thanks
Seshu
Maybe you are looking for
-
WLS adding m: namespace to webservice response
I have created the most simple webservice possible to recreate the problem, the HelloWorld webservice. It takes a name parameter as string to the getGreeting operation and returns a string response. As you will see in the examples enclosed below, the
-
Hi, A user submitted the program and his prog is pending/normal for long time, it is not being processed where as the reqs submitted by other users are getting processed. Can some one pls explain how to appraoch on this scenario and what could be the
-
Reimbursement type not displaying
Hi experts, we are working on claims and reimbursements . Ecc 6.0 / EHP 4 . I have configured all prerequisites in the back end. My reimbursement type is not displaying in the portal . Wat s the problem behind this . Please suggest . I h
-
Hi all, Can any one explain the procedure for defining the stat & Schedule condition in the actions I know the few step in action i.e Define the action profile define the action definition selecting the processing medium selecting the processing time
-
is mountain lion any good? lotsa bugs....... as usual?? Should I get it?