Logic + Groovebox - How to attach a program change to a region?

I have hooked up a 16 channel Groovebox with logic 8 to use as a sound module. Is it possible in Logic to "attach" a program change message to a midi region?
e.g. A region playing the groovebox midi channel 1 sends a message to the groovebox telling it to play program/preset 56.
Thanks for the help!

There are several methods to do that...
1/ Select the midi region and double click it to open in Piano Roll. Open Hyper Draw in Piano Roll and choose Program Change from the list. Draw Program changes there.
2/ Place the Playhead to the place you like to input Program Message in Arrange, hit the "Pause" button in the Transport and enable "Record" button. This way Logic is in "Record in place mode". While the region track is selected go to its Inspector and check the "Prg" box after that click and hold your mouse to the right of it and choose program 56 from the list. Logic will make a new small region with the Program message. If you have a setting "Merge the new recorded regions" in the Settings this small region will be automatically merged with the selected midi region in question.
3/ Select the Midi region and open it with Event List editor. Select "Create" button, and click the Program button to create new message.
4/ You can use Hyper Edit window and create "Program Event definition" after that draw program changes etc...

Similar Messages

  • How to attach print program and sap script for F150 transaction

    How to attach print program and Z sap script for F150 transaction

    Hi,
    you can find the customization for dunning in transaction SPRO under this path: Financial Accounting->Accounts Receivable and Accaounts Payable->Business Transactions->Dunning.
    Kostas

  • How do you assign program changes to external controllers in mainstage 1

    i would like to use 6 specific buttons on my controller to toggle between patches
    i know how to scroll through patches using my controller by assinging the next and previous patch functions to 2 buttons on my controller
    however what i want is to just be able to push button 1 and go to my gladiator AU synth, then push button 3 to go to my sylenth AU synth. basically i want to be able to change in real time on the spot, spontaniously without premeditation or having scroll between multiple patches to get to the one i want to use.
    in the previous posts it says
    on the patch list select the instument
    in the patch inspector go to attributes
    select program change, then assign it a number
    then assign a midi controller button to trigger that program change number
    i can do everything except the last part
    how do you assign a program change to a controller button? i cant see anywhere how to do this,
    i am using mainstage 1.0.2 thank you so much for any support you can give me

    I am not sure about that. Do you mean that all I have to do is provide the interface <cc:attribute name="value" type="lvl1.lvl2.someClass"/> and when I run the method, the returned result will be written into the expression provided in "value"?

  • How do i set program change messages to audio instruments?

    it doesnt appear in the info window like it does for midi instruments...
    Any ideas? Quite a lot of my reaktor instruments need program change messages, so im a bit stumped how to start working with my ideas.

    It can be done in the event editor. Open the event list of the region, select the pencil tool and click to the program change button. A new program change event will appear in the list. All you have to do now is setting the position and the desired program number (maybe you have to subtract one if your soft synth starts with program No.1 because MIDI standard starts with zero).

  • How to attach java program with CRM OD

    Hi
    i have a java program that i want to attach with CRM OD user interface so that i can run it on the press of a button or through any other way. Please suggest me some way to do this.

    Hi,
    The web applet and web tabs features allow you to embed content within CRM On Demand. You can develop an interface to your code (i.e. HTML page containing a button that will invoke your java application) which can appear within the CRMOD UI using these features.
    Thanks,
    Sean

  • How to perform row level changes in a region of table type

    Hi Gurus,
    I am having a region of type table. In this table I have added a details section. In the details section I want to display an item only when its not null. So I have changed the code in controller to make the render as false for this field when it is null. But this is applied to the item present in all the rows in the table.
    For example: If there are two rows in the table and first has some value in X item while second has null value for the same item. Then both the rows do not show the item X (render is set as false by controller).
    Is there any way to have the item visible in first row and invisible in second row?
    Thanks,
    Manish

    You have to go for SPEL binding. Create a transient attribute in the same VO of the table and set the value of the each row to true or false depending on the value of the attribute of the first, say using decode statement ( DECODE(firstattr, null, false, true)) and then bind this attribute to the RENDERED_ATTR attribute of the second item using SPEL binding. Please refer Dynamic User Interface section of the Chapter 4 of OA Framework Dev. Guide.
    Regards,
    Guru.

  • How to attach a customer program during saving in tcode qm02

    hi,
    i have written a abap program which will send emails after saving data in qm02 . but i do not know how to attach this program so that it executes upon saving data in qm02 . can any one help me out .
    thanks in advance.
    Kallol.

    Hi Kallol,
    Check with this user exit QQMA0014  QM/PM/SM: Checks before saving a notification.
    Close the thread if this solves your query.
    Regards
    Abhii

  • What values do I enter in the program change field for EXS24 ?

    I am using YaMAHA WX5 WIND CONTROLLER to play instrument sin Logic. I can get 'next settings' and 'previuos settings' to work with cc values. However, because of the setup of the WX, it wouls work better for me if I coud use its program change buttons.
    What value should go in the program change box ?
    OPEn EXS24
    click edit
    navigate edit>preferences>select previous instrument or next instrument
    afer that what value will allow EXS24 to change instruments using my WX5.
    I have used MIDI monitor to find what value the WX sends and the only think that shows up is 'program'
    I have tried learn assignment in Logic. When I press the program change button, Logic reads it as program change but provides no value.
    Thanks

    any one?

  • B4D  controller program change buttons and EVB3?

    Anybody using the B4D controller in Mainstage figure out how to get the program change buttons to work the presets on plugins? Also- how do I get the B4D drawbars to work the upper drawbars on the EVB3 instead of the lower drawbars which is what it's doing now? Much obliged

    I had the B4D for a drawbar controller. The Doepfer D3C with 2 racks is much better as a controller, imo or another hardware clone itself with at least 2 racks. I am a bit spoiled though with 4 racks on my new Hamichord with all the same B3-controls (as the B3) using the B4II though it can run the EVB3 as a controller
    Once you create your on-screen virtual drawbars they are assigned in the edit menu to the appropriate drawbar 16' 8' etc. You then can 'learn' (or should be able to) with the B4D after the on-screen drawbars are assigned. You could make a lower on-screen rack also and assign them. Using the lower drawbar button the the B4D - you should be able to learn those also so it works with the B4D controller.

  • Can software instruments recognize MIDI program changes?

    I'm trying to send program changes from my Oxygen 49 (blue). I see them register in the transport window in Logic but the patch doesn't change. For example, trying to scroll through different instruments in the sampler would be much faster than having to use the mouse if I could use the + & - buttons on the Oxygen.
    All other control surface functions work fine using M-Audio DirectLink—transport, faders, track selection, etc. But not program changes. Any info would be appreciated. I've contacted M-Audio support but they were not helpful--horrible phone support.

    brewbaker wrote:
    I'm trying to send program changes from my Oxygen 49 (blue). I see them register in the transport window in Logic but the patch doesn't change. For example, trying to scroll through different instruments in the sampler would be much faster than having to use the mouse if I could use the + & - buttons on the Oxygen.
    Most (if not all) of Logic's plugins do NOT receive program changes, the EXS24II can be setup to use two program changes as a toggle for "Next Instrument" and "Previous Instrument". Set Next Instrument to Prg change 1, Set Next Instrument to Prg change 2.
    This way you can select Prg change 1 to select the next instrument, then go back to Prg change 00 on the Oxy49, select PG change 1 again to go to the next instrument.
    And so on...
    Use the EXS "Options" button, then select Preferences to set this up.
    pancenter-

  • How to configure a map of patches names of my midi device in order to insert program changes from Logic?

    How to configure a map of patches names of my midi device in order to insert program changes from Logic?

    Thomjinx wrote:
    You can usually use a patch editor-librarian program like Sound Diver or MidiQuest to copy and paste the patch names (one bank at a time) into the patch name list of a multi-intsrument object in the environment.
    That's what I do.  Works like a charm.
    Cheer,
    Thomjinx
    "My first copy of Logic came on Floppy disks"
    And you will need to setup bank change commands for your particular instrument, if it does in fact have several banks of internal patches. Logic comes with a selection of bank change commands, one of them will almost always work.
    My first copy of Logic came on floppies, two of them I think and was MIDI only, moved up to Logic_Audio at version 3.0 I think.

  • Does noboby know!!! program changes in logic with kontakt3 instrument banks

    Hi all.
    im having real trouble understanding program changes from the events list in logic pro in conjunction with Kontakt 3.
    i have a region playing a bar of a violin legato then a bar of staccato then a bar of tremolo (just for example) using kontakt 3.
    i have created a new instrument bank in K3 and loaded violin legato on 001, staccato on 002 and tremolo on 003 of the K3 instrument slots.
    its from here that i just dont understand and find the logic manual useless as usual.... how can i get it to change??? firstly, nothing is selected in the program change events list... i havnt changed anything yet... fair enough but how can i write it in, so to speak, from this point??? it wont let me write any new number change and basically wont let me do anything.
    i messed aroud with this for hours without much luck and when i could get it to change it was giving me strange instument names like grand piano etc
    so i guess iv really missed somthing here
    any help??
    marc
    Mac OS X (10.5.5)

    I forget how to write them PG changes in, but what I do, is make a program change from your master keyboard while recording into Logic..Then go in and look at the note edit list to make sure it's correct. Change number if you need. The bank select always overwhelmed me, so I never dealt with that either.
    Another approach would be to create a 2nd patch in Kontakt, and have it respond to a different midi channel, then change the midi channel on your event list, or perform from master kbd that is set to appropriate midi channel

  • How to get Material attached to a change number

    Hi All,
    I have change number with me. I need to know lab/office field of the material attached to that change number.
    Can anybody suggest me how to get it?
    Thanks in advance.

    hi ,
    This thig u want in report or sap script .
    if in report u make it  through program and join with that field using for all entries .
    if in smartforms then check it in DDIC list and specify if not available then through program u call that fields.
    in script through program u can do that.
    Regards,
    Subash chandra Sahoo.

  • How can I programly change button's blink speed, blink forground/background color?

    How can I programly change button's blink speed, blink forground/background color?
    Besides changing the LabVIEW.ini, is there another method to achieve?

    I was about to post a new one on this old thing but came across this when running the exe file from a vi with a blinking and back/foreground color property. In the vi mode everything worked properly as intended with the properties (different color and transparent other than the manual setting under the options->color), including changing the the color under options menu. But the exe file made the BG/FG color to red and yellow while blinking. I came across this topic a long time ago but never used the blinking indicators in the .exe files. NI or someone else has said this is a bug or the default in .exe running environment, please confirm this so I do not have to play around with this.
    Also attached is the .ini file from the .exe file and how I add a BG/FG color line to get it working like blue when visible and transparent when not?
    Thanks in advance!

  • I bougth the sf2 program change for garagaband, but what is it exactly and how do I make it work?

    I couldn't find out what exactly the sf2 program change is, but it seemed nice, so I bought it, hoping that it would explain itself when installed. It hasn't. I did hope that it would give me some more midi instruments, and it seems like it should, but how to get them into garaband (10.0.2)?
    This thread seems to explain it: How to do use Soundfonts (.sf2 files) in GarageBand 10?
    It says I can add "audio unit plugins" to a track. Now I don't know what an audio unit plugin is, but I assume that it is a confusing word for a sound, and that it refers specifically to the sf2 sounds. I got as far as the smart control inspector but then "Click an empty part of the Audio Units area, choose Audio Units, then choose a plug-in from the submenu." What is the audion units area? I have clicked the empty part of whatever I could find here, but there is no submenu anywhere.
    Is there anybody out there who could give a really basic explanation of what it is that I have purchased and how I can make it work? I would really apreciate it.
    Ahston

    I got a bit further. I found the submenu and I am able to load a default instrument. But I cannot change that instrument to any other.

Maybe you are looking for

  • Custom Report for CO04n Mass Printing

    Hi, In CO04n for a given order number, production plant and order type when we click from main menu mass printing->execute. We get a list of outputs together for the order number. Object List. Job Ticket Pick List Goods Issue Goods receipt Confirmati

  • 2008 Airport Express utility doesn't work all of a sudden, name reverted to ID, lost security, message not supported.

    The Airport Express I purchased in 2008 worked fine this morning, but when I tried to use Wi-Fi with my cell phone and iMac the light was green on the AE but no signal.  I unplugged AE and unplugged my modem, plugged in my modem, plugged in my AE, it

  • Search MS Word for Exact Match

    I've got a script that opens an MS Word document, then searches through a directory for each image file (.jpg), then does a find and replace using the filename as the search string, and inserts the image in place of the text it finds. My problem is t

  • Help ! My iTunes library has deletet 3/4 of my songs !!!

    It just suddenly happend. I heard on a CD (thatwas copy controlled) and I had the iTunes opend. Suddenly iTunes shuts down and when I click on the desktop icon, it starts "looking for files". When iTunes finally apairs on the screen 2/3 of the songs

  • Button for background audio toggle? (C6)

    Hi everybody, is it possible to insert a button that toggles ONLY the background audio, which is set for the complete presentation? If you are listening to a web based presentation the backgorund music might be annoying for some listeners and they ju