"Logic has detected a possible conflict "" -- HELP!

The full error message is, "Logic has detected a possible conflict between one or more third party MIDI or audio drivers. Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older or unused drivers."
OK, where exactly on my mac do these older or unused drivers live???

I've looked through some old threads on this issue and some seem to have been produced by track automation, which wouldn't be causing my issue as none of my tracks have automation.
Everything has worked perfectly up until just today; the only thing that changed was I installed the 3.0.1 version of Guitar Rig 3. I thought it might have something to do with the driver for Rig Kontrol hardware, so I deleted and reinstalled... Same Conflict message. So I force-quit Logic and opened a track that was all software instruements -- same problem.
Can anyone help me? I am desperate here!!!

Similar Messages

  • Logic Pro *8 has detected a possible conflict between one or more...

    NOTE: This has NOTHING to do with opening Logic 7 sessions in Logic 8. This warning repeatedly pops up when starting Logic Pro 8, and when opening new sessions, and when adding tracks...and it's just unbeatable.
    Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
    I only suppose this could be either the Oxygen 8, or Digidesign 002 drivers? But Im certain that I do NOT use the 002 drivers.
    Anyone know about this? I only started seeing this problem after upgrading to both Leopard, and Logic Pro 8.
    Could my dongle be the problem? Hehe, I still have that plugged in from Logic 6!
    Ouch, this problem is so persistent I'm going to go back to Logic Pro 7.

    hi.
    Having just experienced this problem, I tried reinstalling the pace InterLok Extensions but this did not help. I then uninstalled the extensions (using the uninstaller script provided by pace) and now everything works. I need pace for some software i own so this is not a permanent solution for me...
    (I experienced this problem using logic 7.2.3 on OSX 10.4.11)
    Message was edited by: damien lock

  • " LogicPro has detected a possible conflict error "

    Hi All,
    I know this has been flagged before as a known issue but I cant see a specific answer based on my set up.
    Error message :
    " LogicPro has detected a possible conflict between one or more third party midi or audio drivers "
    Background :
    I have two macs, a macbook pro and a mac pro. On my macbook pro ( older system ) I have both Logic 7 & Logic Studio, On my macpro I only have Logic Studio.
    I had a completed track on Logic 7, when trying to open in logic 8 I got the mentioned error, But when I copied the track to my new mac pro system i got the same error again, the mac pro is a recent buy and a fresh install.
    Can some one please advise on how to resolve this issue, do i need to remove all automation data from the original copy within logic 7 then transfer across ?
    Really keen to sort out as planning to wipe my macbook pro and re-start from scratch when snow-leopard is released
    Hope someone can advise
    Cheers
    Andy

    I guess I'd search for all drivers, and see what comes up. Delete al that aren't Core audio, and make sure I have the current M-Audio driver for your device and re-install it. Just a guess, really...

  • GarageBand has detected a possible conflict between one or more third party

    I have 200 computers that when you launch GarageBand 3.0.5 it comes up with the error:
    GarageBand has detected a possible conflict between one or more third party MIDI or audio drivers
    Our image is basically 10.5.6 with mainly Adobe CS 3 suite. No other sound programs or anything sound or video related was installed besides iLife 06 and I'm not sure what is causing the issue. I have tried reinstalling iLife 06 and run all updates available from Apple and repairing permissions. I have went through the plugins in /Library/Audio folder and haven't had any luck at all.
    What gets me is under the admin account I have it working fine by removing the default emagic plugin in /Library/Audio/ etc.. but if I log in as a regular user without admin privileges i get the error.
    I have tried deleting pref files in the users Preferences folder, but I just can't find a workaround.
    It kinda seems to be like a permissions issue since the Admin account works, but I have tried pushing permissions 777 to /Library/Application Support/ and to /Library/Audio and to /Applications/Garageband.app and still no results.
    I was blaming an Apple update because things worked fine before, I'm not sure what caused it. I reinstalled the combo update and that didn't help either.
    I reformatted and installed 10.5 and upgraded using the combo updater to 10.5.6 and installed iLife 06 and installed all available updates from Apple like I have in the image and things work fine.
    But I need to get this working on our image.........Anyone have any ideas as to what could possible be the issue and might know a fix????
    Google searches the solutions I have found are repairing permissions and deleting plugins. I have tried repairing permissions and have no plugins besides the defaults, but I have already removed the emagic one and nothing else is in there.
    Thanks!!

    To get me through the year I deleted a bunch of Microsoft Office Receipts in /Library/Receipts and it fixed the issue.
    I have no idea why, deleting a receipt from another app shouldn't affect anything, but it worked. I spent many hours trying to figure out a solution and this worked!
    We are running iLife 09 now and no issues so far!

  • "garageband has detected a possible conflict..."

    I see that this problem has come up a lot in the past but none of the solutions I've found have worked so far. I'm working on fixing garageband for the computers in my high school's music tech lab and this is the error message I'm getting:
    "garageband has detected a possible conflict between one or more third party MIDI or audio drivers"
    I've tried deleting the "com.apple.garageband.plist" file in Library/Preferences/, but to no avail.
    I've also looked for drivers in: Library/Audio/Midi Drivers but we are using the M-Audio Keystation 61es (http://www.m-audio.com/products/en_us/Keystation61es.html) which doesn't require drivers, so there is nothing in that folder...
    There are at least 2 computers in the lab that are having this issue. GB works in the "Teacher" admin account but not in "Student", so I'm running a Permissions Repair in disk utility for one of the computers right now. The rest of them work in "Student".
    In the meantime, is there anything I have overlooked...? Would like to have this issue dealt with by later today or tomorrow... thanks! here's some info:
    Mac OS X version 10.5.8
    Model: iMac
    MIDI: M-Audio Keystation 61es
    The only other things plugged into the computer are headphones and a mouse/keyboard.

    Thanks for the suggestion. I had been looking in student/library/. I went to Macintosh HD/library, took the com.apple.garageband.plist file and the EmagicUSBDriver.plugin and threw them both into a temp file on the desktop. Opened up garageband and the issue is still present... I'll restart and see what happens, would deleting the files completely make any difference then having them in a different folder?
    Otherwise would the permissions repair work? I'm hoping we don't have to end up reformatting these computers...
    Thanks for the quick response!

  • The wireless system has detected a possible intrusion attack by signature..

    We are getting the following "critical" alert with the following:
    Description
    NULL Probe Response - Zero length SSID element
    Message
    {controller} IDS 'NULL probe resp 1' Signature attack detected on AP 'AP Name' protocol '802.11b/g' on Controller 'x.x.x.x'. The Signature description is 'NULL Probe Response - Zero length SSID element', with precedence '2'. The attacker's mac address is 'xx:xx:xx:xx:xx:xx', channel number is '6', and the number of detections is '1'.
    Help
    The wireless system has detected a possible intrusion attack by signature detection for a specific attacker. Immediate attention is required.
    I'm trying to find more information on this and am wondering if this is a false/positive.
    Thanks for help in advance.

    I would point more towards a false positive alert here.
    NULL Probe Response - Zero length SSID element:
    Some frames are permitted to carry a null (zero length) SSID, called a broadcast SSID. For example, a station can send a probe request that carries a broadcast SSID; the AP must return its actual SSID in the probe response. Some APs can be configured to send a zero-length broadcast SSID in beacon frames instead of sending their actual SSID. However, it is not possible to keep an SSID value secret, because the actual SSID (ESS name) is carried in several frames.
    As far as how to modify the IDS sensor in the WLC:
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008063e5d0.shtml
    HTH

  • MainStage message: possible conflict with third party midi or audio drivers

    Just when I thought everything was going to be ok...
    MainStage gives me a message that it detects a possible conflict with third party audio or midi drivers. The only midi device I'm using is class compliant (doesn't need a driver). My audio interface is an Apogee Duet and I'm using the most recent driver. Logic registers no such complaint. MainStage freezes. Any ideas?
    Thanks,
    Mark

    Hello.
    I am seeing this whenever MIDI events are being sent into either Logic or MainStage (primarily MainStage), while they are launching. On my setup, this will either crash the application during launch, ( sent to Apple ) or trigger this "...3rd party conflict / driver..." dialog.
    In either instance, disabling incoming MIDI messages by turning them off on all connected MIDI devices, or as suggested, waiting to connect the device in question until, the application is fully launched, fixes my version of this issue.
    ** Please Note: In my experience, increasing the number incoming MIDI messages, exacerbates the issue and, makes a dialog or crash more likely to occur.
    Hope this is helpful.

  • Window has detected and IPS Address Conflict

         To Whom this my concern,  I keep getting this message, which, I had mention in the subject line.  I have reset my wifi box and the box, that Charter gave me quit a few times. But, this message keeps on coming up, for some odd reason or another. 
         I was just wondering.  I had a Hp Lap Top 2000, that some one had stoolen off me, quit a few months, ago. I reported it to the police station and HP and they said that they could not do anything about it. Because, I absolutely lost my serial number, that I had written down.
        But, I used the same email addresses and Passwords on both computes. So, I was just a wondering if the person could be useing the lap top, that I had gotten stoolen from me and this is the way, this is why this message keeps popping up on my computer.
        Oh, I even called up Charter and mention it to them and they absolutely could not figure out what is going on either. So, I just thought, that I would text it on the internet.  To see if any one absolutely knew what was going on.
    Well, if you want to get in touch with me.  My email address it [Personal Information Removed]  or
    [Personal Information Removed].
    If you could help me out. I would appreciate it and awful lots.
                                                                                                                                                        Yours Sincerely,
                                                                                                                                                         Mr. Rockie A. Bates

    Hi @Rockiebates1949 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Window has detected and IPS Address Conflict on your Home Network. This error message indicates that another computer on the network is using the same IP address that your computer is using. Each computer on a network must have a unique IP address. To fix this problem, run the Network troubleshooter.
    I hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • When sync my iphone I get "Windows has detected as IP address conflict"

    Computer (win7 64bt) is fine.  Same with iphone 5s, IOS 8.  But when I plug in iphone to sync with PC I recieved the message :"Windows has detected as IP address conflict."
    (This does not happen with my ipad - phone only) When I close the window and everything seems to be working fine...but it pops up regularly.  Any thoughts?
    Thanks-
    MR

    These forums are dedicated to Residential products and services offered by Verizon.
    For help on Verizon Wireless issues, please post your topic on the Verizon Wireless community.
    Thank you.

  • TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

    I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

    Turn off your firewall and antivirus software.

  • I'm using ipod touch for a year now. I was using this morning and suddenly the ipod doesn't work at all maybe it got wet from my bag but there wasn't wet stuff in there. and itunes said iTunes has detected an iPod in recovery mode. please help me

    I'm using iPod touch for a year now. It was doing fine this morning but in the afternoon suddenly when I took it out of my bag, the screen was just black and it wouldn't turn on and stuff. So I thought it didn't have battery so I charged it didn't work. I plugged to the computer and it said iTunes has detected an iPod in recovery mode. You must restore this iPod before in can be used with iTunes.
    Maybe my bag was little wet today but i don't think that is why.. since it wasn't that bed.. just some paper was wet and stuff..
    What should I do..? Please help me.

    Connect to the Computer you Usually Sync with and Follow the Steps Here...
    Recovery Mode
    http://support.apple.com/kb/HT1808

  • A mate has an iphone 4 as a work phone and needs to get all data incl messages onto an old iphone 3 as he is leaving. Is this possible, any help appreciated

    A mate has an iphone 4 as a work phone, now he is leaving and needs to get all data incl messages etc onto an old iphone 3. Is this possible, any help appreciated.
    Robbie

    You won't be able to restore a device running iOS 4.2 from a backup of a device running iOS 5 (as you found out).  And the Iphone 3G can only be updated to iOS 4.2.1 so there is no way to migrate from his iPhone 4 back to his iPhone 3G.  He would have to at least have an iPhone 3GS, which will update to iOS 5.1 and would be able to restore from the iPhone 4 backup.  Unfortunately, there isn't any way around it.

  • 'iTunes has detected an iPod in recovery mode' loop. Help?

    On Friday I plugged in my iPod touch (4g) to download the new ios 5 (from 4.3.5), but about when it reached about 4 minutes remaining, the error message 'iTunes has detected an iPod in recovery mode. You must restore the iPod before using it with iTunes.' appeared. I've tried restoring it about 10 times now, the closest being  just 2 seconds away from finishing.
    The iPod has the screen on the usb pointing to the iTunes symbol.
    It does NOT show up under computer, or under disk management, so I don't know if i can change the drive letter. If there are alternatives, please let me know!
    I've tried using another computer and different users - all of which comes up with the same error, so I'm thinking that it is the iPod that is the issue.
    When i attempt to restore it it says it should take around 15 minutes, but usually the error comes up within the last 5 minutes.
    The iPod info just says Name: iPod
                                      Capacity: n/a
                                      Software version: n/a
                                      Serial number: n/a
    Really don't know what to do, any help is appreciated.

    Unfortunately not yet. Any thoughts on this are useful...

  • Can anyone help me. Every time I open iPhoto 9.2 and try to go to photo stream iPhoto quits unexpectedly.  When I reopen I get "iPhoto has detected inconsistencies in your library.  Please click Repair to avoid any potential problems."

    Can anyone help me.  I have iPhoto 9.2 and  Mac OS X 10.7.2.
    Every time I open iPhoto 9.2 and try to go to photo stream iPhoto quits unexpectedly.  When I reopen I get "iPhoto has detected inconsistencies in your library.  Please click Repair to avoid any potential problems."
    I have read plenty of the posts on the subject and it seems that deleting the "3ivx" fixed the problem.  I looked at the detaied reports and see where it says "
    Library/Application Support/3ivx" etc..
    On my report it says "/Library/Application Support/iLifeMediaBrowser/*/iLMBiPhoto8Plugin".  Does this help with an answer?

    I am also having this crashing problem. I am running lion on a 2010 mac mini. My iPhoto library is kept on an external drive. I just upgraded to iPhoto 11 and everytime I try to enable photo stream the app crashes. I have tried all the above suggestions, including re-installing iphoto from the Mac App store. Below are the first 50 lines of the error message. Any help would be greatly appreciated.
    Process:         iPhoto [430]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.2.1 (9.2.1)
    Build Info:      iPhotoProject-628000000000000~1
    App Item ID:     408981381
    App External ID: 4641130
    Code Type:       X86 (Native)
    Parent Process:  launchd [160]
    Date/Time:       2011-11-02 22:33:22.628 -0500
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          526713 sec
    Crashes Since Last Report:           9
    Per-App Interval Since Last Report:  4439 sec
    Per-App Crashes Since Last Report:   8
    Anonymous UUID:                      8147E0FC-2622-4A56-920E-44498E48B55B
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    VM Regions Near 0:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Applications/iPhoto.app/Contents/MacOS/iPhoto
        __TEXT                 0000000000001000-0000000000d1b000 [ 13.1M] r-x/rwx SM=COW  /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Application Specific Information:
    objc[430]: garbage collection is OFF
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.iPhoto                        0x00824501 0x1000 + 8533249
    1   com.apple.iPhoto                        0x001678d6 0x1000 + 1468630
    2   com.apple.Foundation                    0x91bdff49 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49
    3   com.apple.CoreFoundation                0x95508ff3 ___CFXNotificationPost_block_invoke_1 + 275
    4   com.apple.CoreFoundation                0x954d3d78 _CFXNotificationPost + 2776
    5   com.apple.Foundation                    0x91bcb136 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
    6   com.apple.Foundation                    0x91be03ca -[NSNotificationCenter postNotificationName:object:] + 55
    7   com.apple.iPhoto                        0x0016716a 0x1000 + 1466730
    8   com.apple.iPhoto                        0x00167111 0x1000 + 1466641
    9   com.apple.iPhoto                        0x0015c6f4 0x1000 + 1423092
    10  com.apple.CoreFoundation                0x95520e1d __invoking___ + 29
    11  com.apple.CoreFoundation                0x95520d59 -[NSInvocation invoke] + 137
    12  com.apple.RedRock                       0x01d62e61 -[RKInvoker _invokeTarget:] + 33
    13  com.apple.CoreFoundation                0x9551e091 -[NSObject performSelector:withObject:] + 65
    14  com.apple.Foundation                    0x91c1cf64 __NSThreadPerformPerform + 503
    15  com.apple.CoreFoundation                0x9549584f __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15
    16  com.apple.CoreFoundation                0x95495206 __CFRunLoopDoSources0 + 246
    17  com.apple.CoreFoundation                0x954bf0d8 __CFRunLoopRun + 1112
    18  com.apple.CoreFoundation                0x954be8ec CFRunLoopRunSpecific + 332
    19  com.apple.CoreFoundation                0x954be798 CFRunLoopRunInMode + 120
    20  com.apple.HIToolbox                     0x93bcca7f RunCurrentEventLoopInMode + 318
    21  com.apple.HIToolbox                     0x93bd3d9b ReceiveNextEventCommon + 381
    22  com.apple.HIToolbox                     0x93bd3c0a BlockUntilNextEventMatchingListInMode + 88
    23  com.apple.AppKit                        0x97b27040 _DPSNextEvent + 678
    24  com.apple.AppKit                        0x97b268ab -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
    25  com.apple.AppKit                        0x97b22c22 -[NSApplication run] + 911
    26  com.apple.AppKit                        0x97db718a NSApplicationMain + 1054
    27  com.apple.iPhoto                        0x0001159a 0x1000 + 66970
    28  com.apple.iPhoto                        0x00010a29 0x1000 + 64041
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib                  0x91bbc90a kevent + 10
    1   libdispatch.dylib                       0x9a5bbc58 _dispatch_mgr_invoke + 969
    2   libdispatch.dylib                       0x9a5ba6a7 _dispatch_mgr_thread + 53

  • Can I get help with podcasts?  When I try to open the podcasts, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish.  everything else works fine, it even downloads podcasts and syncs.

    Can I get help with podcasts?  When I try to open the podcasts tab, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish.  everything else works fine, it even downloads podcasts and syncs.

    The only other thing I can suggest is to use the Repair option for iTunes.
    Download the iTunes programme (do not uninstall your current iTunes) and then "install" the new copy. At some stage you should see an option to "install" or "Repair". Take the Repair option.
    Once you've done that, if you still have a problem, I don't know what else to suggest, except to search through the discussions to see if anyone else has had the problem and managed to fix it.

Maybe you are looking for

  • TS3992 I bought iPhone 5 but cannot delete iPhone 4S back up because it says it is in use

    Help, I bought an iPhone 5 yesterday but cannot back it up to the cloud, because it says there is no room.  I tried deleting the last back up from iPhone 4S but it will  not delete because it says it is in use.

  • Vendor Bill discounting-Urgent

    Hi Experts, I want Vendor Bill discounting steps in IMG & User level T.Codes Also, now i am in implementation projects, i am new to implementation project, plz help me. Thanks in advance veera

  • Track ends early and follows story end

    I have 2 very similar tracks (slightly different versions of same video) with identical chapter markers. One plays all the way through just fine. The other plays through several chapters but when it gets to the end of one chapter it follows the end j

  • Cannot upload raw files to lightroom 2.0 from my Canon Q10

    Lightroom says the CR2 files are corrupt - but I am quite sure they are not because: a) I can view them on the camera and, b) Picasa downloaded them just fine. I originaly tried downloading to LR directly from the camera. When that failed, I download

  • Restoring an iTunes Backup

    I did a backup recently. Now I want to restore songs from one of the backup disks. The Help article says "To restore backed-up files, insert a backup disc, choose File > "Back Up to Disc," and then click Restore." I believe I following the directions