Logic has terrible Orchestral plug-ins, but I suppose this is a common issue since others are so expensive.

I would guess quality in this field comes pricey, since I found out the top of the line "Vienna Symphonic Library" can run up to $6 grand or more. So my question is, since there are so many "VSL" versions to choose from where do I start. I mean, is anyone familiar enough to recommend the best "Software Bundle" to choose from under $2 grand for this highly exceptional line.
My main problem with Logics bundle is the attack times. They are so slow that anything remotely fast never allows the notes to spring into full fruition. it's impossible getting any furiously fast violin, and the choirs fair little better. I hadn't even tried the Brass section yet since what's the point if the string section is so poor. And speaking of which, their String Ensemble sounds like anything but. It's more like a single stringed instrument with a bit of reverb -- if that even, I thought GarageBand was bad. So that is how I came to the conclusion such quality Orchestral Software is hard to come by. I play mainly Epic Metal and great sounding Choir, String, and Brass sections are non-negotiable, but I had no idea I'de be laying out as much for the right software as I had for my new MacBook Pro. If thems the breaks so beat it, I'm too seasoned a musician to not finally produce some quality material, even if it kills me.
O, and one more thing. I'm still confused about Logic. My new Bundle box says "Logic Studio," but the app says Logic Pro, so I figured it doesn't really matter. But then I often get asked which one of these do I have, like even before posting this quirey. I suppose that Logic Studio contains Logic Pro plus other stuff, whereas Logic Pro is just that minus all the extras. Wow, I can't believe I finally figured it out, I think.

stewa348 wrote:
I agree with you about the volume on the phone itself. (I have 3Gs). It needs to be louder. I also wear hearing aids. However I do think there may be something wrong with your phone because when I connect my earbuds (Klipsh) I get very good volume through them. In fact at full volume it's way too loud. I would push for a replacement phone.
FWIW, my daughter (who also wears hearing aids) has trouble hearing her iphone. It appears to have more to do with the speaker not being lined up with the hearing aid's input. Her audiologist pointed out that some current hearing aids support bluetooth, I think we will get those next time we replace her hearing aids.

Similar Messages

TS4498 Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loq

Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.

In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
However the 32bit to 64bit bridge plugin 32 Lives, states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
http://www.soundradix.com/products/32-lives/compatibility
Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX.. That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions...

My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open?

My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open? Thank you!

Thanks R_Kelly:
Adobe Photoshop Elements Version: 12.0 (12.1 (20140303.12.1.49334)) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:11 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 4
Processor speed: 2400 MHz
Built-in memory: 3069 MB
Free memory: 1631 MB
Memory available to Photoshop Elements: 1598 MB
Memory used by Photoshop Elements: 69 %
Image tile size: 128K
Image cache levels: 8
Video Card: ATI Radeon HD 4800 Series
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Caption: ATI Radeon HD 4800 Series
Video Card Memory: 512 MB
Application folder: C:\Program Files\Adobe\Photoshop Elements 12\
Photoshop Elements scratch has async I/O enabled
Required Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Plug-Ins\
The first thing I did was UPDATE. I have all the latest updates available (according to the updater). The Camera Raw Plug-in says it is version 8.0.
The RAW files are from a Canon T3i. It's a very common camera, I can't believe it wouldn't be supported.

Where does Logic Pro 7 install plug-ins?

Apologies, but I cannot find the answer to this question. Thanks in advance for any help!
Where does Logic Pro 7 install plug-ins by default on the computer? I have searched all through the Macintosh HD Library and with Spotlight to no avail.

Logic (and most other DAW host) applications deliberately do not make their plugins phycially separate AU (or VST) plugins that get installed in the Compononets folder. They do not want you to be able to use then with any other program. They are "inetgrated" into the code, and so not usable outside the app. Or the idea is, you don't get the plugins unless you buy the host program (and it is also a way to lock you into using their DAW software).
There was once I think talk of making some Logic plugins available as a 3rd party package, but that may have been before the Apple acquisition. So if you want your work to be portable to other DAW programs, then you are better off not using any of Logic's built-in plugins (and other 3rd party plugins do what Logic's plugins do, often better, though obviously you must pay for 3rd party plugins).
http://web.mac.com/postfader

Trying to download adobe program 'adobe p;hotshot CS5 Optional Automate Plug-ins' but get a message "does not contain valid signature" Any ideas to get around that please.

Trying to download adobe program adobe photoshop CS5 Optional Automate Plug-ins, but get a message that it does not contain valid signature and it won't install the app. Can someone help with this please? Trying to reach Adobe by phone is impossible.
ev

First, have you installed all the updates for photoshop cs5 by going to Help>Updates from within photoshop cs5?
The automated installer only installs the following plugins:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4965
The following plug-ins and associated files are available via an installer:
Automate Plug-Ins:
• Contact Sheet II
• Picture Package (ContactSheetII)
• Web Photo Gallery (WebContactSheetII) plus presets
• Script for Layer Comps to Web Photo Gallery
Other Optional Plug-Ins:
• TWAIN
Other plugins including the pattern maker plugin need to be installed manually using this download:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4964

Adobe InDesign CS5 needs plugs ins, but how? Adobe InDesign CS6 won't open says OS problem. Adobe upgrade site crashes on me. ?

Adobe InDesign CS5 needs plugs ins, but how? Adobe InDesign CS6 won't open says OS problem. Adobe upgrade site crashes on me.

You might ask in InDesign to learn how to install plugins
>says OS problem
What IS your operating system, and which exact version?
Is the link below where you are starting for upgrades?
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

HT1677 I can't see videos because I can't install adobe flash player. I read to enable plug ins, but I can't see either in my iPad.

I can't see videos because I can't install adobe flash player. I read to enable plug ins, but I can't see either in my iPad.

You can try using the 'official' Facebook app or Friendly For Facebook - not sure whether they work with videos.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!

There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

World music & orchestra plug ins keep disappearing and reappearing

I'd be grateful if anyone can explain how to keep the plug ins like orchestral and world instruments in my library permanently as sometimes when I select an instrument, the plug ins disappear from the list and I don't know how to access them until they somehow re appear. Is there an icon or a setting I can select to keep all the instruments in the library tab at all times.
These plug ins came with logic express automatically.
Thanks for any suggestions.

Hello Again,
I tried adding a new software instrument, then clicked on the settings button - but still no world or orchestral options - according to the manual they should automatically be in the settings tab along with all the other usual options - I'm wondering if it's a bug in logic express 9?

Logic has an appetite for RAM - but only this week

Greetings.
I'm using the Mac Pro at work, so ignore my signature specifications.
This week Logic has completely swallowed my RAM, both on session with lots of tracks and plug-ins, and also on the light sessions where there would never usually be a problem.
A colleague installed the Sonic Birth plug-in last Friday. Could this have contributed to some weirdness?
Even without a session open, just the application running on its own, it's eating up 1.06 GB of real memory (according to Activity Monitor). This seems a trifle odd. I'm not running anything else out of the ordinary.
The Mac's specs;
2x 2.8 GHz Quad Core Intel Xeon
2 GB RAM
OSX 10.5.8
Logic 8
I am aware that 2 GB is not a lot of memory for a Mac Pro, however it's been running fine for the past 10 months so I don't believe that is the issue. If anyone can offer a suggestion, I'd be most grateful.

Macintosh Lou wrote:
Greetings.
Even without a session open, just the application running on its own, it's eating up 1.06 GB of real memory (according to Activity Monitor). This seems a trifle odd. I'm not running anything else out of the ordinary.
On my system both Logic 8 & 9 use less than 200MB real memory, even with my default project open, with no project open it's less. You're sure there's not something open in the background? Logic-8 does use about 1GB virtual memory, Logic-9 uses about 1.6GB virtual.
If you think the problem is Plugin related you can always move 3rd party plugins out of your components folder for testing.
pancenter-

My E-MU X-board49 controls Logic, why not my plug-ins?

I hope somebody can shed some light on this: Logic 9 is excellent with my X-board. I am able to program what I want and Logic learns it perfectly. What I'm wondering is, why don't my external plug-ins respond to my controller in the same manor as Logic? I mean, SOME Native Instruments plugs will attach when I click the "learn midi" button, but most do nothing. For example, I click "learn midi" on my Waves plugs and they don't respond at all. Is there some kind of menu within Logic where I can program my plug-ins to respond to the X-board, or are they just not compatible? Thanks!

Guess you can set up such things through the environement but that is really not my strong side.
Me, I use a novation controller with the AutoMap function. That works with Waves and most other plugins.
Do a search for Environement tutorials or wait for a better reply.

How do i remove tibsearch from my macbook air, i have tried the suggestions of removing plug-ins but i can't seem to get rid of it

Hi, can anyone tell me how to remove tibsearch from my macbook air, i have tried removing the plug-ins as suggested etc, but nothing seems to work.
Thanks

Did you turn off extensions, too? Safari Preferences > Extensions tab

Logic Pro 7 instrument plug ins....trouble

After long hours and no result.....have to rely to the connoisseur
Some instrument plug ins work (EVB3) and others give me a regular noise before and after loading a sound (ESX24, EVD6,...)
It happens at regular intervals...like a metronome but those bangs appear when the memory display updates itself.
If somebody can tip me
thanks

tip ,go to the store and buy some mac specified ram , at least a gig ,you will be shocked at how much your performance will improve.
anyone on this site will agree ,the source of all your problems is that 512 of ram.[this won't solve the problem with your girlfreind]
K

Ads keep popping up, saying I have an extension called 'None Extension'. I looked for it in add-ons under extensions and plug-ins but I didn't find it.

I looked for an add-on I supposedly have on Firefox called 'None Extension' with no luck. Ad's continue popping up all the time, saying they're powered by this extension. Google won't show me anything about it either and I didn't find it under extensions or plug-ins in add-ons but I didn't find it. What should I do?

You can check for recently installed suspicious or unknown extensions.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I have lightroom 2 and wanting to get the time lapse plug-ins but i dont know how.

how or where can i get the plug-ins for time lapse for light room 2?

Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 3.6

Logic has terrible Orchestral plug-ins, but I suppose this is a common issue since others are so expensive.

Similar Messages

Maybe you are looking for