Logic i/o midi AND audio?

im trying to use the Logic i/o plug in , not sue if im doing it right?
I have a sound module thats going into my 828mk2 inputs (11&12) and midi set up.
I can play the module fine from Logic but i thought that when you used the i/o plug in you could set up ONE track to use (like a internal plug in) that became the midi and the audio in order to record the track?
Do i have to record on a MIDI track the part from the module and then use a different audio track to capture it?
Im sure once i used a instrument track with the i/o on it and it became a midi/audio track all in one for outside gear? so i could record/midi all within the one track?
Am i being stupid?

so how do i use the external instrumnet and the i/o together?
External instrument on the instrument slot on a software instrument channel. This handles both MIDI and audio routing. What do you want to use the I/O plugin for? If you want to route to external hardware, then put the I/O plugin on one of the FX inserts on that software instrument channel.
Can i make my hardware become like a VST? and if using both utilities can i render a file to audio like i can a vst?
No, you have to record it in the conventional way.
or does it have to be real-time bounce only?
Yes, external instruments have to be played in real-time. Logic cannot yet speed up the universe to perform faster than realtime bounces - at least, not in Logic 8...

Similar Messages

Midi and Audio tracks simultaneously armed for recording

All, whilst engaged in laying down the bass track for the guitar solo section of my latest monster his, I encountered one of those sorts of frustrations that makes one long for some means of swift egress from this mortal coil, this vale of tears: that is, while laying down my totally awesome bass track that when they hear it will send JP Jones and Boosty Collins to employee as actuaries, I kept getting the hateful "unable to synchronize the audio and midi error." I'll spare you the catalog of the various lame attempts I understood to remedy this problem, as well as the curses directed toward my fate, and Daw ineptitude in general. Then I nnoticed that both the software instrument tracks (Addictive drums) and the audio track (aforementioned bass) were both armed for recording, signified by the red R in the track header! Well, upon de-arming the software instrument track I was able to record by bass line in a mimimum of takes, and as visions of illegal intozicants and comen of questionable morals dance through my noggin as recompsense for my trouble, with to make the point to all relative newbies such as myself that the answer to problems that seem on surface intractable as usually staring you right in the glazed eyeball.

What?...
I'm sorry maybe I don't understand everything you are sayng... but I can replay to the titles of the Topic!
Actually recording a MIDI instrument and an Audio Track symultaneously comes with serious bug!!!
you cannot use Punch-in on Fly when an Audio and instrument track is armed at the same time...
or better you can but the MIDI and audio output will be dropped for a moment
Provide a Logic feedback
http://www.apple.com/feedback/logicpro.html!
THIS IS A LOGIC 8 BUG!!! BIGGEST SERIOUS BUG!
I suggest you to use Logic 7 when you need that!
Thank you so much for remember me this..
I'm sorry no alternative solution... or.. if you have 2 Macs you can use one for Logic MIDI and another one for Logic Audio!
G

How to record midi and audio at the same time?

Hello,
I have a Roland sh-201 synth and Logic 9. When I use patches from the sh-201, it will record it via audio. What if I wanted to record the audio but also have the midi information as well? How would I be able to accomplish this? My synth is connected via USB which carries both midi and audio. Sorry for my poor english, but any help would be greatly appreciated.
Thank You.

Hi
Logic will record both audio and MIDI at the same time, but you *MUST* have the Software Instrument/MIDI track selected in the Arrange Track List.
The audio track must be 'Record Ready':
HTH
CCT

Experiencing Delay Between Midi and Audio MOTU 828 Mk1

Hi everyone
Wondering if somebody can point me in the right direction. I'm using an Intel iMac running Leopard 10.5.8 and Logic 8. I just got hold of a MOTU 828 MkI and am experiencing a severe delay between midi and audio.
Clock source is set to internal in the 828 settings and sample rate is set at 44100, so that's all as it should be.
I'm at a loss has anybody got any ideas?
Many thanks.

Hi,
I assume MIDI is earlier than audio.
Do You have plugins in busses and or master outputs?. Try to disable them and see if that still happens.
Here I had issues with 9.01 that aren`t plugin related and had to reboot to solve it. I upgraded to 9.02 and didn`t see them again (yet.)
If you HAVE to have your plugins in the busses and master and still want to have your MIDI properly aligned... Well you´re asking too much, my friend. Write a polite letter to Apple telling them if they´re joking calling Pro to this app that can´t keep two basic features in sync. BTW: same happens with video (at leat in L8. Didn`t check 9 with that yet)
After that, breath deeply and use the input objects to route your midi instruments inside Logic. Then they´ll be in sync, but at the price of loosing all their analog warm. Weird, isn´t it?

Replace mode midi and audio

I hope I'm missing something. when recording midi and audio at the same time, with merge and replace turned on, the midi is ok but the audio is NOT in replace. Is there a way around that. If not does logic have a play what's on top structure like nuendo? I need to emulate a tape machine as closely as possible in this application
Thanx

I hope I'm missing something. when recording midi and
audio at the same time, with merge and replace turned
on, the midi is ok but the audio is NOT in replace.
Is there a way around that. If not does logic have a
play what's on top structure like nuendo? I need to
emulate a tape machine as closely as possible in this
application
Thanx
i am not sure if this answers this. Your audio is not sounding like a tape machine?
Try inserting an au unit like: Tape delay, Stereo Delay, or Sample delay, which are all within logic.
If you want the full effect place it in the insert. If you want a partial effect send it as a bus.
I hope this helps.
Dual G 5 2.5 ghz hightower 1 gig
Dual G 5 2.5 ghz hightower Mac OS X (10.4.5) 1 gig

Midi and audio regions are getting moved

Hallo... I am working on my arrangement on Logic Pro 9.1.8. I have many midi regions on a few tracks. I added a few audio tracks and started to slice them and reversed some parts. (I also played with new key commands) Now all the regions on each track (midi and audio) seem to be tied up. When I delete one region all the others (on this track) shift toward its position. Why does it happen?
(Locking SMPTE position partly helps but I would like to have access and be able to edit the regions). Any help would be appreciated.

Sounds like you've got your drag mode (upper right of arrange) set to one of the shuffle settings.

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Error Garageband - can't sync midi and audio

I have no midi attached but still get an error message "Can't sync midi and audio".
All I am trying to do is record a voice-over using the built in mic on the iMac. But this error message keeps popping up constantly. I close it and then 10 seconds later it pops up again.
Why is garageband trying to sync a mid that I have not connected?

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Can't Record Midi and audio Simultaneously

I just noticed that I cant record audio and midi simultaneously. I wanted to record a audio vocal track as I was recording a midi piano track but it wouldn't record. If I selected the audio track, the midi track wasn't heard. If I selected the midi track, I could hear the piano, but the audio wouldn't record. Weird. I had to record the midi track, and then go back and arm 2 audio tracks for recording. One for the vocal and the other to convert the midi track into a audio track. I don't understand why I can't record midi and audio at the same time. I am using a MOTU 896HD for my audio, so I can record up to 8 audio tracks at a time.
Does anyone have any clues as to how to set this up to record midi and audio at the same time?

Setup your audio and midi tracks and then hold the shift key and hit the record button on each of them. Both audio and midi will record.

USB/Firewire Interface for MIDI and audio (Garage Band)

I want to connect a Roland Handsonic (electronic drum) and Shure microphone to a Mac Pro for recording in Garage Band. What is the best USB/firewire interface for MIDI and audio?
Mac Pro desktop Mac OS X (10.4.8)

If you click one of the links you can read all about it in depth.
three guitarists
That's not what you asked for B-)>
Once you want more than 2 audio inputs, the prices start jumping up dramatically.
would this be the best interface to use?
If you really want "Best" then it's a simple answer:
http://www.bulletsandbones.com/GB/FirePod.html

IPad2 - Midi and Audio interfaces / Camera Kit

iPad2 question I have Midi and Audio interfaces, specifically Edirol UM-880 for Midi and Edirol UA-5 for Audio. If I get an Apple Camera Connection Kit, will they work with my iPad2

Check out the iRig:
http://www.ikmultimedia.com/products/irigmidi/
It will connect "any" MIDI device to an iPad/iPhone.
(i don't have this--yet. I'm just using a USB powered keyboard with a powered USB hub with my iPad.)

Midi and audio in quartz composer.

I am fairly new to quartz composer. Does any one know how to set up the midi input or controller in it? I can set up a basic image, but it will not respond to me playing my midi keyboard. I am so lost.

You just select Midi and Audio tracks while holding down the shift button. Arm both tracks->select the Midi track first (click into track header) ->hold down shift->select the Audio track->both track headers turn grey->record->have fun...

Help! connections for the midi and audio cables for use with Apogee & Logic

Newbie to mac! A Basic question, I know.
I have:
Logic express 8
1 x Apogee Duet
1 x Midi in/out interface.
After my external sound module recieves the midi info stored in logic, it creats an audio signal.
QUESTION!
How do I... monitor this output with my audio recoded files in logic. so audio and midi (final mix) is played together, using the Duet?
I understand that a seperate mixer would do the job, i have one, but i need to keep the music making and recoding process as simple as possible, otherwise i get annoyed with lots of settings and things and give up... for another year!
All I wanna do is:
Record one real instrument at a time. these would be Guitar, Bass and Mic. (ok, simple connections with the duet.)
Record midi keyboard messages into logic, edit, quantise etc. rhave logic send the midi info out to my roland xv 5080, and route the audio out of the xv 5080 with the final mix.
(I dont know if this can be done with the Duet??)??
Whilst advoiding the use of a seperate hardwarwe mixer.
would i have been better going for the Ultralite or something?
Any help is much appreciated as i am struggling to get my head round the basics.

I understand that it can be done this way, but i will be continually swapping leads. Yes a mxer wuld solve this, bu would a cheapish mixer effect the sound quality of the duet?
could i use the digital output on roland and send to the imac's digital in? and at the same time record audio in logic. so basically this digital signal will go into imac into logic then be routed straight to the output that the duet is connected to? Would this work, is there a seting in logic where u can have more than 1 input and send this straight to the main outputs??
ooooo, maybe thats a possibility, just hought of that. dont know if it'll work though.
Thanks clanwork

Error when synchronising MIDI and audio

I just faced a serious problem when playing back my projects, the speed is slowing down, crackle is heard and a pop up states there's an error when synchronising audio and midi and it's necessary to check some external device..what can it be, how can it be solved ?I;m using Novation Nio audio interface and an external hard drive, that's all..anyone has the same problem?

Hi,
First up your *Audio I/O buffer* (to 1024) in Logic>Preferences>Audio>Devices. Leave the I/O safety buffer off. Perhaps try to freeze some tracks.
Also have a look at these:
http://support.apple.com/kb/TA24535?viewlocale=en_US
http://support.apple.com/kb/HT3161
regards, Erik.

Midi and audio regions overlap when recording with autodrop

Say you are playing a melody for notation purposes with midi. You record 2 bars. Region is 2 bars long. You learn the next 2 bars and notice that this phrase actually starts at bar 2 beat 4. So you set autodrop to bar 2 beat 4 and punch in. The new region begins at bar 2 beat 1. If you adjust the region start point you see the end of the first region hiding behind it. In the score window, before trimming that new regions start point, you see rests for the new region and notes from the first region together..really lame. If you trim the new regions start point to bar 2 beat 4 it looks right. This is in replace mode mind you.... Why doesn't the punch appear at the autodrop location instead of at the beginning of the bar. I don't remember logic working like this before, did it? Seems like it was doing the same thing with audio, had regions hiding all over the place behind punches...very confusing. I saw a similar post but it didn't seem to resolve this issue...Is it a bug? Mike Peters
Macbook---G4 800 Mac OS X (10.4.2) Logic 7.2.3

A few things (and there aren't many) regarding capture recording... For me it's been a tried-and-true feature of Logic for a very long time and continues to work flawlessly.
How Capture Works (and some operational notes)
Logic continually captures any and all MIDI data from the time you hit PLAY to the time you hit STOP, even if you're not "in record". Notes, program changes, controllers, sysex, anything MIDI will get buffered as you play and are ready to be turned into a region once you hit your Capture k/c. You can play to picture, improvise, whatever, for a very long time and never worry about Logic losing any of what you played.
The KEY is that after you hit STOP, you must hit your Capture k/c before hitting PLAY again, because once you hit PLAY, the MIDI buffer is, out of necessity, be cleared.
However, you don't need to STOP Logic to use Capture. You can play along with a track and hit Capture at any time. Logic will create a MIDI region from what you played and continue capturing additional MIDI data from your real-time performance while Logic continues to run. So you can start Logic, play some stuff, capture, play some stuff, capture, all without hitting STOP. In this scenario, just remember that if you hit STOP at any point that you will need to hit Capture that last bit of your performance (if you hadn't done so already) before hitting PLAY again.
One other operational note that's really important...
CYCLE MODE: If Logic is set to cycle and the cycle wraps to the L-locator before you've captured your performance, you will lose what's in the MIDI buffer. Jumping back to the L-locator in cycle mode is the equivalent of hitting STOP and then hitting PLAY. This is probably the single most important thing to watch out for. I've lost a few good "noodlings" because I had my L-locator set too close.
Hope this helps. I'd be curious to learn of your Capture experiences and see what you guys think!
-=iS=-
Message was edited by: iSchwartz

Logic i/o midi AND audio?

Similar Messages

Maybe you are looking for