Logic install serial number

I am reinstalling LOGIC cause all the sounds didnt install with it. But now its asking for serial number and I bought it from the app store I dont have one or how do I get it?

If you have only ever had the app store version of Logic 9 then there never was a serial number.
If it persisits in asking you for a serial you will need to contact Apple to sort it out but be prepared for awkward questions.

Similar Messages

Installing serial number

I cannot install my serial number I received with purchase and download of Acrobat X! Pro. I keep getting this error message
"Serial number provided is valid but a qualifing productcould not be found on this computer"
Select a Product does not have Acrobat X! Pro listed.
I have downloaded this product and have used it for the past couple of days. It is installed on this computer. I paid a lot of money and for me not being able to install serial number creates continual
display of acrobat to buy.

That message appears to be indicating you purchased an upgrade version but it is not able to find a qualifying earlier version that validates the upgrade purchase. If you have a qualifying earlier version there should be someplace you can enter the serial number for that version so that your upgrade is properly validated.

In Design CS2 "Asking for me to re install serial number"

And it denies my serial number, and did purchase the software. I have been using it for years without any problems.
I was using my PowerBook G4 yesterday in the car. I had a inDesign file open for at least 2 hours.
The file is at least a year old with continuous modification.
Tonight I went to open another inDesign C2 file at I get a window asking to Personalize Your Software. Asking for me to re install serial number.
After digging through 5 boxes of software I found the number and entered it.
It is telling me I have a invalid number - not true.
CS2 4.0.5
10.4.11 OS X
PowerBook G4
I have over gigabit of curriculum that I have authored that I use everyday...help

I told you what to do in your last post. The answer hasn't changed.
Bob

Can you figure out from a G4 logic board serial number what it is?

Can you figure out from a G4 logic board serial number what it is? for example if it is single or dual processor support, and the speed, i know you can check the case serial number in the apple site, but can't for the life of me figure out the logic board serial number, if any one could help identify what G4 it comes form that would be great, Can you figure out from a G4 logic board serial number what it is? KD30405K1P3UA
many thanks

Hi, Forrest!
The Chipmunk site was my first thought when I read the initial post, but although it returns a manufacturing date of the fourth week (Jan) of 2003, I'm not sure that's even accurate, since Chipmunk couldn't return any more info than that.
I wonder if an Apple Store Genius would/could look it up for him...
Regards,
Gary

Finding Logic Pro Serial Number w/o Install Disk

I installed Logic Studio Version 9 a long time ago, and until now, have had no problem moving the application from computer to computer. However, after recently migrating all my stuff from a Macbook running Lion to an iMac running Mountain Lion, I can't open Logic. It asks me for a serial number I've long since lost track of, from an instal disk I no longer have. Is there any place within the installed software itself to locate the serial number?

I lost my Logic 9 serial, i had moved house and we were flooded out about 6 months before i lost it and had to chuck a lot of paperwork out that was caught in the water. I wanted to put it on to my new mac, and like a fool i had uninstalled it from my older iMac so was left with nothing but the disks.
Contacted Apple and they were no help whatsoever for me, i was really annoyed with them, complained and hit a brick wall where they couldn't offer to help as i could find no receipt either, never offered to check their system for me.
Luckily i had put the serial number in my old iMac box, which i didn't discover until a few weeks later, along with the receipt.
I was so pleased to find it! ...but i do resent Apple a little after my dealings, really felt hung out to dry. As LP9 had just appeared on the app store at the time i did wonder if they were trying to drop any 'old school' boxed LP9/Logic Studio enquiries.
If they do provide you with a new serial, i beleive there's a fee for it too from my correspondance so it may be worth checking out what that is first, and whether you're best putting that into Logic Pro X.
Also, if you have Logic running on any of your old machines i think you can go to the About menu and it's displayed on there.

Lost Logic Pro Serial Number and Install Disks, can they be replaced?

I accidentally threw out my install disks and manuals (including the booklet with the serial number) for Logic Pro 8! I believe have registered this product. I think I can simply download the installation files but I will need the SN#. Is my serial number linked to my apple account? Can I find this online somewhere?
I also use pro tools and there is a special section on the website just for this type of thing. I am hoping there is the same kind of thing with apple but I can't seem to find it anywhere.
Thanks in advance for your ultimate awesomeness in helping resolve this issue for me and the rest of the idiots :}

Have you searched this forum? The question comes up every three or four days.
You can call up Apple and provide them with valid proof of purchase, and they will provide you with a new code.
They'll probably send you disks as well, for a fee.
I severely doubt that an official download is an option, as the whole package is somewhere around 45GB.

Logic Studio Serial Number Deactivation

Hi all,
I have searched the Apple Support Communities and Google to try and get a answer to my question. I have also tried the Apple Online Support (and they suggested that I call their technical department, that are now shut!!!).
How do I deactivate the serial number on Logic Studio? The reason is that I currently use Mountain Lion OS but it's become a nightmare (constantly freezing and really slowing down), so I am going to go back to Snow Leopard as this was the most stable OS that I have used. I haven't done a time machine back up (and I didn't have Logic when I was using Snow Leopard anyway).
I want to reinstall Logic Studio once I have installed Snow Leopard onto my Macbook Pro, but am concerned that if I don't deactivate it properly that I will have issues as the serial number will already be allocated. If I was to uninstall the software, would that automatically deactivate the serial number? If so, how can I uninstall it properly (It's not like Adobe software where you have an uninstall folder/option within the applications folder)?
I have tried the help within the software, but to no avail, and I just want to have Snow Leopard back on my machine as the bugs and lack of stability with Mountain Lion are driving me crazy!
Many thanks in advance.

Thanks for the quick reply .
So... If I was to erase my hard disk and reinstall Snow Leopard, then reinstall Logic, does this pose any issues with the licence? Would I have to make Apple aware, or can I just reinstall Logic onto Snow Leopard, no problems?
Thanks

I don't have a Logic Pro serial number

I just purchased Logic Studio V2.1 UPGRADE PRO from a German Apple reseller and I cannot use it because I have to own a previous version of Logic (which makes sense since it's an upgrade).
I never had a previous version before (that's my mistake). I'm using Logic for the fist time and I don't have an old serial number.
Is there something I can do? What are my options?
I really need this software. I'm on a macbook (mid 2007) and I cannot upgrade to OS X Mountain Lion.

Everything worked out fine. I followed your advice and found an older version of Logic on ebay. I've installed the upgrade.
Thank you so much for your time Blueberry, I really appreciate it... Bye!!!

Logic 9 Serial Number Not Valid

I recently backed up my computer and did a complete OS reinstall (starting from stratch and not using the old image due to old corruption files). I then decided to manualy copy over Logic Pro 9 files from the backup drive to the new image. I went to open Logic and it asked for my serial number. I typed it in and then it decided to crash on me. Well no big deal, I probably didn't copy all the files. So I deleted as many files as I could find and then proceded to reinstalling Logic 9 from my Logic Studio disc set. Entered name and the serial key during the beggining of the install and it says "Serial Number Not Valid" and asked me to type it again and gives me the same message. After 3 failed attempts, it closes the installation program. I have tripple checked my spelling in the key and have checked forums regarding this problem. I have already attempted to move the ID files in Library/Application Support/ProApps to the desktop; no change. Any input would be nice. Thank you.
I am running Mavericks 10.9.1 on a MacBook pro 2012.

Was your copy of Logic Studio 2.0 (the one containing LP9) a full version or an upgrade version?
If it was an upgrade version you need to enter your original LP8 serial first.... and then it will ask for your LP9 upgrade serial...
If it was the full version, contact Apple directly and ask for their assistance.
http://www.apple.com/contact/
or use the online webpage to obtain a replacement serial number...
http://support.apple.com/kb/HT1861?viewlocale=en_US&locale=en_US
Note: Once you have successfully installed LP9.. you must upgrade LP9 to the latest version 9.1.8 before you run it, via software updates... as you are running Mavericks...

Logic Pro Serial Number

My macbook was stolen and I just got a new one. The Time Machine Feature allowed me to put everything onto my new mac and my Logic Pro seems to be installed. When I try to open it, a prompt asks me for a serial number. I have entered the part number from my receipt and every number listed on the barcode sticker on the small box containing my Logic discs, but each gets an invalid number response. I`m out of the U.S. right now and the huge box that the discs and manuals came in is back home. Is that the place I could find the serial number? Is there any way to get the serial number using other identification that I have, my .mac account, purchase receipt, etc?

Assuming you bought it from apple; just call them and explain. I had a similar problem with license keys except that my CDs simply never came in the post even though my imac came pre-installed and I had ordered it as part of a bundle - in my case it was Logic Express. I called Apple, they took some details, and within about 30 minutes I had one of their support guys email me my license key.
I was very impressed, no fuss, nothing. Eventually 3 weeks overdue the CDs turned up - can't necessarily blame apple for that as the rest of what I ordered arrived a week early.

HT2375 Retrieving Logic Studio serial number

My harddrive crashed recently and I didn't have my Logic application backed up.
I still have the install DVDs but not the box with the serial number.
Does Logic automatically register online when you first install it? Is there a way I can retrieve my serial number?
ps - it is the Academic version.

Thanks for the quick reply .
So... If I was to erase my hard disk and reinstall Snow Leopard, then reinstall Logic, does this pose any issues with the licence? Would I have to make Apple aware, or can I just reinstall Logic onto Snow Leopard, no problems?
Thanks

Installing Serial Number Prob

Is it possible to install Logic Studio on two iMacs (a work pc and home office pc)? I know the license allows one laptop and one PC.
The reason I ask is that I had Logic 8 on both an iMac (for editing at home) and a laptop (for editing at work). I have removed it from the laptop as my work computer is now another iMac. I can't get past the intial install page because it says the serial number is invalid.
Do I need to unregister the laptop somehow? Is there some other issue going on? I would only be using one computer or the other based on work flow/work load.
Thanks

Hi
search with spotligth for Logicstudio or com.apple.RegLogicStudio.plist and system ID on Main Library/Preferences folder
delete them and restart
hope this helps
G

Install serial number

Each time I attempt to install my store purchased Adobe Photoshop Elements 13 and Premiere Elements 13 disc on my Mac, I get to the Serial Number page, and type in the serial number. Then it says it does not recognize the number, even though I've typed in the 24 digit number. Please help!

If you have only ever had the app store version of Logic 9 then there never was a serial number.
If it persisits in asking you for a serial you will need to contact Apple to sort it out but be prepared for awkward questions.

Full install serial number not working on CS4.

I have received permission and new serial number from Adobe to install my old CS4 (I also own CS6) on an older computer but the install says it is complete after only 7 folders show up in my applications and there is no InDesign, Photoshop, DreamWeaver or Illustrator. "Chat" said that

Any number of problems could have occurred during installation including OS version compatibility, permissions of directories, etc.
There forums are not an outlet of Adobe Technical Support which is generally much better equipped to assist with product installation issues.
- Dov

Aperture 2 install - serial number problem

Disclaimer: I'm pretty good on a pc. Absolutely terrible on Mac, never had so many problems with tech :/
So...I have my serial number from the back of the Aperture 2 "Installing your software" booklet. Checked that I'm entering "I's" not "1's." Got dashed between the sequences. Capslock on etc. Searched forum, quite a few posts on serial number problems. None matched.
Enter serial number. Second window pops up stating I've entered an upgrade serial number (I only have the expired trial version of Aperture installed), and requesting my "serial number."
I'm lost now. Checked my original docs, there's nothing on Aperture trial version. Fired up the trial and I see what looks like a license key (to Apple, not me) on the launch screen. That's not accepted by Aperture 2.
Any thoughts on this appreciated.

M_Austin wrote:
Thanks, think you solved this Wish the label said something like that, the box only says Aperture 2, not upgrade license. So I'm guessing I have to pay $199, and keep this $99 package to upgrade it? I hope not. I'll ask at the store.
There is a tiny label on the bottom edge of the box. Mine says "Aperture 2.0 Retail". The tiny label on my box for Final Cut Express 4 says "Final Cut Express 4.0 UPG". Does yours not say "UPG" on that little label? If not, you should be able to return it for the full version (plus pay the difference, of course). If it does say "UPG" you might be out of luck as most open software can't be returned.

Logic install serial number

Similar Messages

Maybe you are looking for