Logic is slow and computer is very slow with logic open

Ok so I Reset P-RAM parameters. appleoption+pr. I understand that I probably need to run it for a while to get things rolling again. but i have been doing that for a few days now and it is slower than ever. audio is continuously dropping out and i hear the processor starting up very slowly when it should be kicking in full gear. battery 2 is always saying that memory is low upon opening a song file. i need this bad boy in lubed lighting action. what do we do here?
Powermac G5 Dual 2.5,   Mac OS X (10.4.3)  

Hi adamluv,
- Which version of LogicPro are you running?
- How much RAM do you have?
- Upgrade to Mac OSX 10.4.8
- Never open another application (and then leave it open) before you launch LP.
- Turn off airport and get rid of redundant apps like widgets etc..
- Trash your LP preferences.
- Get Onyx and perform at least weekly maintenance on your computer.
Good luck,
sonther

Similar Messages

  • I upgraded to Yosemite and computer running very slow. It is an older iMac 2009. Thinking of downgrading os or upgrading ram unless there is something else I can try?

    I upgraded to Yosemite and computer running very slow. It is an older iMac 2009. if I cant get it running faster I will have to downgrade os or upgrade ram. Is there something else I can try? Here is scan of computer:
    Problem description:
    computer Very slow after upgrading to OS Yosemite
    EtreCheck version: 2.0.11 (98)
    Report generated November 15, 2014 at 3:50:50 PM MST
    Hardware Information: ℹ️
    iMac (20-inch, Early 2009) (Verified)
    iMac - model: iMac9,1
    1 2.66 GHz Intel Core 2 Duo CPU: 2-core
    2 GB RAM Upgradeable
    BANK 0/DIMM0
    1 GB DDR3 1067 MHz ok
    BANK 1/DIMM0
    1 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
    NVIDIA GeForce 9400 - VRAM: 256 MB
    iMac 1680 x 1050
    System Software: ℹ️
    OS X 10.10 (14A389) - Uptime: 4 days 4:38:8
    Disk Information: ℹ️
    Hitachi HDT721032SLA380 disk0 : (320.07 GB)
    S.M.A.R.T. Status: Verified
    EFI (disk0s1) <not mounted> : 210 MB
    Macintosh HD (disk0s2) /  [Startup]: 319.21 GB (201.09 GB free)
    Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    OPTIARC DVD RW AD-5670S 
    USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. Keyboard Hub
    Apple Inc. Apple Keyboard
    USB Reader USB Mass Storage Device 31.67 GB
    S.M.A.R.T. Status: Verified
    NO NAME (disk1s1) /Volumes/NO NAME : 31.67 GB (27.49 GB free)
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
    Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
    Mac App Store and identified developers
    Kernel Extensions: ℹ️
    /Applications/Toast 11 Titanium/Spin Doctor.app
    [not loaded] com.hzsystems.terminus.driver (4) Support
    /Applications/Toast 11 Titanium/Toast Titanium.app
    [not loaded] com.roxio.TDIXController (2.0) Support
    /System/Library/Extensions
    [not loaded] com.Huawei.driver.HuaweiDataCardDriver (4.0.6) Support
    [not loaded] com.roxio.BluRaySupport (1.1.6) Support
    [not loaded] com.sony.driver.prs (1.0.1d1) Support
    Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
    [failed] com.apple.accountsd.plist
    [failed] com.apple.AirPlayUIAgent.plist
    [failed] com.apple.bird.plist
    [failed] com.apple.CalendarAgent.plist
    [failed] com.apple.CallHistoryPluginHelper.plist
    [failed] com.apple.CallHistorySyncHelper.plist
    [failed] com.apple.cloudd.plist
    [failed] com.apple.coreservices.appleid.authentication.plist
    [failed] com.apple.coreservices.uiagent.plist
    [failed] com.apple.EscrowSecurityAlert.plist
    [failed] com.apple.icloud.fmfd.plist
    [failed] com.apple.iconservices.iconservicesagent.plist
    [failed] com.apple.nsurlsessiond.plist
    [failed] com.apple.pbs.plist
    [failed] com.apple.pluginkit.pkd.plist
    [failed] com.apple.printtool.agent.plist
    [failed] com.apple.scopedbookmarkagent.xpc.plist
    [failed] com.apple.secd.plist
    [failed] com.apple.security.cloudkeychainproxy.plist
    [failed] com.apple.spindump_agent.plist
    [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
    [failed] com.apple.AssetCacheLocatorService.plist
    [failed] com.apple.awdd.plist
    [failed] com.apple.cache_delete.plist
    [failed] com.apple.coresymbolicationd.plist
    [failed] com.apple.ctkd.plist
    [failed] com.apple.diagnosticd.plist
    [failed] com.apple.iconservices.iconservicesagent.plist
    [failed] com.apple.iconservices.iconservicesd.plist
    [failed] com.apple.ifdreader.plist
    [failed] com.apple.MobileFileIntegrity.plist
    [failed] com.apple.nehelper.plist
    [failed] com.apple.nsurlsessiond.plist
    [failed] com.apple.periodic-daily.plist
    [failed] com.apple.periodic-weekly.plist
    [failed] com.apple.sandboxd.plist
    [failed] com.apple.softwareupdate_download_service.plist
    [failed] com.apple.softwareupdated.plist
    [failed] com.apple.spindump.plist
    [failed] com.apple.sysmond.plist
    [failed] com.apple.tccd.system.plist
    [failed] com.apple.wdhelper.plist
    [failed] org.cups.cupsd.plist
    Launch Agents: ℹ️
    [not loaded] com.adobe.AAM.Updater-1.0.plist Support
    [loaded] com.adobe.AdobeCreativeCloud.plist Support
    [not loaded] com.sony.ReaderLibrary.RunReaderLibrary.plist Support
    Launch Daemons: ℹ️
    [loaded] com.adobe.fpsaud.plist Support
    User Launch Agents: ℹ️
    [loaded] com.adobe.AAM.Updater-1.0.plist Support
    [loaded] com.adobe.ARM.[...].plist Support
    [loaded] com.adobe.ARM.[...].plist Support
    [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
    iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    HP Registration Assistant UNKNOWN (missing value)
    Reader Library Launcher ApplicationHidden (/Library/Reader Library/Reader Library Launcher.app)
    HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    net.juniper.DSSafariExtensions: Version: (null) Support
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
    AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 Support
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
    Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 Support
    AdobePDFViewer: Version: 11.0.0 - SDK 10.6 Support
    User Internet Plug-ins: ℹ️
    BrowserPlus_2.9.8: Version: 2.9.8 Support
    fbplugin_1_0_3: Version: (null) Support
    3rd Party Preference Panes: ℹ️
    BrowserPlus  Support
    Flash Player  Support
    Perian  Support
    Time Machine: ℹ️
    Time Machine not configured!
    Top Processes by CPU: ℹ️
         7% syncdefaultsd
         0% launchservicesd
         0% launchd
         0% systemstatsd
         0% SystemUIServer
    Top Processes by Memory: ℹ️
    126 MB HP_Officejet_4620_series
    30 MB Finder
    28 MB ScreenSaverEngine
    24 MB mds
    24 MB WindowServer
    Virtual Memory Information: ℹ️
    25 MB Free RAM
    344 MB Active RAM
    333 MB Inactive RAM
    337 MB Wired RAM
    9.71 GB Page-ins
    146 MB Page-outs

    could the launch agents failing slow the computer or they just don't work. I mean I am willing to upgrade ram but not if there is good chance it won't change speed much. Also to downgrade is it necessary to format the hard drive?

  • I've got a new MacBookair11 2weeks ago and I am very happy with it. Today I've tried to synchronize it via icloud with my ipad and I have lost the camera. Looking through help in internet I found out that I had to reset the SMC. I did exactly as per instr

    I’ve got a new MacBookair11 2weeks ago and I am very happy with it. Today I’ve tried to synchronize it via icloud with my ipad and I have lost the camera.
    Looking through help in internet I found out that I had to reset the SMC. I did exactly as per instructions given but with no luck.
    Is there any other solutions that will fix my camera for facetime and iphoto?
    Thanks for your help 

    MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update:
    "Apple is investigating this issue."

  • I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see.  The reason is that Quick Time will not support the video.  What can I do to be able to get these videos?

    I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see.  The reason is that Quick Time will not support the video.  What can I do to be able to get these videos?  I have all ready download Adobe Flash Player and installed it but it has not effect.

    Get Flip4Mac (for Windows Media videos):
    http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
    And Perian for everything else:
    http://perian.org/
    You should be able to play most videos with QuickTime player once both are installed.

  • I purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

    i purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

    Problem with both the speaker and earphones?
    Have you tried another pair of headphones?
    Yu can try the standard fixes to rule out a software problem:
    - Reset. nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • Can't open safari and computer runs very slow on macbook pro

    I cant open my safari on my macbook pro and it runs very slow

    http://support.apple.com/kb/TS3408

  • I've been using firefox for years, and i'm very upset with the 34.0.5 update's changes to the search engine feature.

    hi,
    this new search engine is incredibly convoluted, and i put some real thought into why it's bad
    the dropdown menu contains more things than it used to. previously only a list with icons and titles and a link to options...now only icons (with no options to include text), a reiteration of your terms and current engine, separators between each icon, and loads of potential results from auto-complete (which i disabled immediately). though taking up less space by forcing icons only, more things were added, giving the user more clutter in less space.
    having a permanent default search engine is counterproductive to the feature's previous nature. this was supposed to be there so i can quickly change between websites i'm searching, now it's been equated to the search feature in the address bar (which i am now also unable to change the function of on the fly, as changing the search engine used would also change the address bar's search function - perhaps influenced this change?). it's now faster for me to type the website i want followed by my terms into the address bar, just like when i use chrome. this feature was one of the largest reasons why i preferred firefox over chrome
    i would commonly leave my search engine on merriam-webster when writing papers, wikipedia when doing research, etc. and now i have to click which one i want. every time. with every search that isnt default, unless i change my default through the options constantly. this is incredibly tedious. most irritating of all is the inability to use hotkeys to select my search engine, the lack of ctrl+up/down. previously i wouldnt have to use my mouse often at all, which is imperative for laptop users
    so yeah, ive put some real thought into this, and i'm very unhappy. this greatly hinders my browsing experience. heard the saying "if its not broken, dont fix it"? ive been using chrome in conjunction with firefox for a few years now, and it's been painful to see mozilla attempt to imitate it. i will be using chrome more often in the absence of this feature (i am right now, even). i'm also upset that i was unable to find a public message boards hosted by mozilla to voice my opinion, and i apologize to whoever customer support employee that (probably didnt) read this - please pass it on to the devs and tell them internet people are angry and said they fucked up. thanks.
    and i beg you, please give us the option to revert back to the old interface in future updates, or at least an official extension overriding this awful update. i realize i cant request this really, and yes im upset, yes im sending an angry email - thats because this is something i use often and i am passionate about it
    sincerely,
    pissed

    You can use the Tab key to select a search engine on the bottom bar and press Enter to use the search engine to do the search.
    *https://support.mozilla.org/kb/Search+bar
    In the current Firefox 34 release there is a new "one-off" search bar.
    This search bar doesn't show the name of the search engine and a logo.
    You can type one letter to make a drop-down list appear where you can see suggestions and see the used search engine and that also has bar at the bottom where you can select other search engines that are enabled via the Search tab in Options/Preferences.
    You can use the Tab key to select one of the other available search engines and press the Enter key to search with the selected search engine.
    Click the search engine icon and click "Change Search Settings" to open the Search tab in Options/Preferences (positioned between Tabs and Content) to select the default search engine and select which search engines to show in the search bar drop-down list that opens when you start typing search terms.

  • My computer writes very slowly with Indesign CS6

    If I open a document save with Indesign CS2 in CS6 my computer writes very slowly. Y must wait two or three seconds until appears the text.
    But if I open a new document in CS6, I haven´t problems.

    Do you happen to have many linked text boxes? If so, this can happen if too many of them are linked. I also had this a couple of times. The only solution then was to split them up again, which can not be done directly, but with one of the scripts named SplitStory.jsx.

  • Dashboard wont load and cpu running at 60% with nothing open

    Hi
    Dasboard wont load suddenly and the cpu is running at 60% with nothing open.
    Restarted several times but no luck
    Also iMac now is slow to open other apps.
    Tried other user and it all works fine so ran macscan and did permissions again but no luck.
    Hope you can help
    Thanks

    Plasmaproductions wrote:
    Thanks for your reply.
    1 dashboard client process was not reponding, after quitting it, it loaded ok but the cpu is running at 20% whereas it had never been more than 8% when viewing dashboard previously.
    dashboard client has 3 processes when open
    Had look at that site and i couldnt find this process on their list.
    kernel_task
    it has no process id, the user is root 1.2 52 140.00 MB 291.38 MB Intel
    That's the main part of OSX (it does have a process id: zero). It always runs, and directly or indirectly starts & controls everything else. (I never noticed it's not listed on that site.)
    also not listed on the site
    #122 iavd root 98.9 5 16.29 MB 604.24 MB Intel
    Google says it's part of iAntiVirus. I'd recommend uninstalling it; there are no viruses that run on OSX. None. Zip. Zero. There is some "malware," such as Trojans, for Macs, though. But (unlike viruses that can get onto your system without your knowledge), you must approve their installation (via your Admin password) and/or operation (via the "This application was downloaded from the internet ..." prompt). For the gory details, see Thomas Reed's [Mac Virus Guide|http://www.reedcorner.net/thomas/guides/macvirus].
    also if why safari is powerpc if the mac is intel? safari takes forever to open on the main user but is fast on the other user of this iMac
    #248 Safari Andrew 11.9 14 165.41 MB 1.34 GB PowerPC
    It sounds like you have an old PPC version of Safari, running under Rosetta. Did you transfer from a PPC Mac and somehow brought over an old version?
    Make sure there's only one version on your Mac; there might be an older one in a sub-folder inside your Applications folder, or in a user home folder.

  • Erratic mouse and blue screens: very disappointed with Snow Leopard

    Since SL installation half of the times I get an eternal blue screen at startup and I have to do a hard power off and restart. But the worst thing is that the mouse pointer gets mad very often and makes the computer totally unusable. I have to restart to keep working, and it's not a problem of the Mighty Mouse (I have 2). Any solution for, at least, the mouse problem? I will have to waint until 10.7 release to get more reliability?

    I dont' want to sound like I'm passing you off, but have you posted in the hardware discussion area?
    http://discussions.apple.com/category.jspa?categoryID=190
    Might be better help there.

  • CS4 InDesign Slow with files opened from shared drive

    We have an issue that I can't seem to figure out...
    I have six different people using Word files and InDesign files that are being opened from a server. When going from Word into InDesign (or vise verse) it takes a few seconds for the cursor to become active; however if the user is copying text from Word to any other Adobe product (Illustrator, Photoshop, Quark) no lag at all. They are also all getting a PDF creation failed when trying to save to the server (error is attatched).
    It's  not a specific file because all six people have the same issue, and  they're all working on separate projects.
    It's not machine specific since (again) all six Macs have the issue.
    Obviously it's an InDesign issue, but what, and why all of a sudden?
    Any  help would GREATLY be appreciated.

    My first guess would be that the client OS version could be apart of it - small changes to the SMB client in 10.6 could explain it. I'd also be interested in looking at the firewall issue. It may well be a combination of both.
    I think said earlier that working locally was not a problem, so you've already done the first logical test. Next, I'd think about trying the following, the order of which I'd base on their level of difficulty:
    Temporarily put one of the problematic client machines inside the firewall (or the server outside of it, though I assume that would be harder/impossible)
    Either upgrade one the of the problematic machines to 10.6.2, or create a Snow Leopard boot system with InDesign installed (on an external drive?) from which you can boot the machine
    I'm sure getting rid of the firewall is not a long term solution, but it would be good to know for future reference whether the firewall is involved. Would upgrading to Snow Leopard be in the cards if it does seem to fix it?

  • Since the last update Firefox has been crashing constantly and something is VERY WRONG with the update!!!!!!!!! Why?

    Since the last update to Firefox, I have had crashes non stop about every ten minutes or so, with very typical use. The update SUCKS and is crashing computers. I am SURE I am not the only one. PLEASE FIX THIS ASAP. I have been a Firefox user forever, but now going to Chrome and Explorer until I hear from you about fixing this issue. Never before have I had this problem with Firefox. Bums me out. But I can't deal with the constant crashes and it is ABSOLUTELY since the last update a day or two ago.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • I want to remove firefox. I find it intrusive and I am very satisfied with safari

    I have no use for firefox and I want to remove it from my computer. i installed it long ago and never used it. recently it intrudes on everything . I have no need for two browsers and I am satisfied with safari.

    Did you try the steps in this article?? [[Uninstall Firefox from your computer]]

  • I just got this HP Photosmart Plus and I am very frustrated with it as it is not printing well.

    I just got this new HP Photosmart Plus and I cannot get to print out a photo from my computer. My computer is also HP. When it prints a photo it is pale and in black and white. Why?

    Hi, within the driver, what options are you choosing for your print? Ensure you are choosing full colour and not grayscale.
    Have the supplies/printhead been exposed to the air for an extended period since removing the packaging? You might want to open up your HP Printing software and utilise the toolbox to carryout some printhead cleaning and get some diagnostic prints - not only will this help if it is a print quality issue but it will also save wasting valuable photo media.
    I am an HP employee.
    Feel free to provide Kudos if I have helped you!

  • Hi, I turning standby My computer at work. With one opened firefox browser and few opened pages. Turning on at home to continue my work with firefox. But firefox do nothing. It is like no internet connection. Explorer works but don't want to use.....

    Cheers for every Idea!

    Hi!
    I'm not 100% sure what are you trying to achieve or what's the issue, but I will try.
    It seems that you want to work with Firefox at your home computer while your work computer is on. I'm not sure if you want to use the information from your work computer or not. If so, you should look at Firefox Sync: [[What is Firefox Sync?]]
    If the only thing you want is to open and use Firefox but not use the information that your work computer has, your issue is about the connection. I will invite you to upgrade to the latest version of Firefox (www.mozilla.org/firefox) and try [[Safe Mode]] if that helps.

Maybe you are looking for

  • HP Pavillion P7-1235. Connect Dell speakers to computer. PC is now wireless.

    Telephone Teck said my computer connection to the wireless modem was not working and he disconnection my computer.  I am now wireless. Have lost my Audio. How do I connect my Dell speakers so I have sound again?  

  • Script to change Safari Preferences

    Hello, I'm trying to build a script to change Safari Preferences : "Tell Application Safari" Set the default browser as "Safari" End Tell But it does not work... I will need it to make this change on a lot of Macs from Apple Remote Desktop. Do you kn

  • Build a querystring within class file throws js unterminated string literal

    Hello all, I have a page that is partially built from within a method. String theLink ="FeedFilePusher";//My servlet                     itemGeoLink = "<a href='#' onclick=top.alertMe('"+theLink+"')>CLICK</a>";The above works fine. The problem is tha

  • Health plans,  IT - 167

    Hello groups, i hv maintained the health plans - IT 167 in PA30 for an employee. In IT - 167, after entering the "Dependent Coverage" field in "Plan Data" Tab it moves to the Dependent Tab where the family details are not displayed. Where as I have m

  • Apache on win2k

    Apache doesn't start on my Windows 2000 SP1 machine. The error log reports: Syntax error on line 2 of C:\9iAS\iSuites\Apache\Apache\conf\mod__ose.conf: Cannot load c:/9ias/isuites/apache/apache/modules/orajipa8i.dll into server: If I comment out the