Logic is using 16.000.000 TerraByte physical Ram??? See picture:

Hi, I got really massive problems with crashes of Logic. I have a absolute clean and new system with nothing more than Logic and OSX!
Look at that:
[img]http://www.xcellent-productions.de/downloads/activity.png[/img]
The most crashes I got when I have loaded lots of stuff in the EXS and after that opening the Logic preferences (over the menu) or closing that song and opening a new one. It doesn't matter if I use the internal audio driver or an external (Fireface400)
Any suggestions?
Xcell

Hi,
first of all the terminal top is showing the same.
The problem should everyone of you simply rebuild. I got some (expensive) new 2 GB (now 5 GB at all) but nothing changes because Logic is only able to adress 2 GB Ram. I thought that was a joke, but it's not. Everytime Logic is using more than 2GB the activity window is showing this 16mio stuff.
So, what is that???
I can put 16GB Ram into my Computer and am able to use just 2 of them??? The MacPro is fast enough to open 100 of EXS but can't load instruments? I am really frustrated.
So, does anyone has any advice how I could make the physical Ram used by Logic smaller? I tried to use harddisc speed fast and recording activity less in the virtual memory, but than I can use about one instrument more (28 at all). What is with other samplers like Kontakt. Is it using the same Ram logic is using or does it use a new thread and it's own Ram? Does Redmaticas EXS Manager merge function is of any use against too much Ram using instruments?
Any advice would be very very great!!!!
Reagrds,
Axel

Similar Messages

OS X Mavericks using SWAP with 16GB of physical RAM? What gives?

Okay. Can someone help me understand why OS X Mavericks is using SWAP and Memory compression when I have 16GB of Physical Memory installed? I'm also only running Safari, Mail.app, Colloquy IRC and iTunes. That's usually the only programs I have open unless I'm playing a game or something. Also, when I reboot, the RAM is back to normal, but after my Macbook Pro has been on a couple of days (I usually have it plugged into the wall), it starts use SWAP in Activity Monitor and Memory Compression. Here's a picture I took before I rebooted, and I will always post my system wide information in case anyone has any ideas on how to keep my computer from using Swap in OS X Mavericks:
Also, here's what it looks like now that I've rebooted:
And, here's my system information I grabbed while using EtreCheck:
Hardware Information:
          MacBook Pro (17-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,3
          1 2.5 GHz Intel Core i7 CPU: 4 cores
          16 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6770M - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:58:0
Disk Information:
          APPLE SSD TS256C disk0 : (251 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh SSD (disk0s2) /: 250.14 GB (195.77 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Logitech Logitech Dual Action
          Apple Inc. iPhone
          Canon iP4300
          BLUE MICROPHONES Blue Snowball
          SanDisk Firebird USB Flash Drive 32.02 GB
                    CIDER (disk2s1) /Volumes/CIDER: 32.02 GB (21.87 GB free)
          Apple Computer, Inc. Apple Cinema Display
          Logitech USB Gaming Mouse
          Apple Computer, Inc. IR Receiver
FireWire Information:
          G-TECH G-Drive mini Device 00 800mbit - 800mbit max
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    MARIGOLD (disk1s2) /Volumes/MARIGOLD: 319.73 GB (209.06 GB free)
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          jp.plentycom.driver.SteerMouse          (4.1.7)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.absolute.rpcgeo.plist
          [loaded] com.absolute.rpcnet.plist
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.skype.skypeinstaller.plist
Launch Agents:
          [loaded] com.divx.dms.agent.plist
          [loaded] com.divx.update.agent.plist
User Launch Agents:
          [loaded] com.facebook.videochat.powershaker.plist
          [failed] com.valvesoftware.steamclean.plist
User Login Items:
          iTunes
          Snak
          Mail
          SteerMouse Manager
          Safari
          SpeechSynthesisServer
          Colloquy
          Knock
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          SteerMouse
Internet Plug-ins:
          Default Browser.plugin
          DirectorShockwave.plugin
          DivX Web Player.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Time Machine:
          Skip System Files: NO
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh SSD: Disk size: 250.14 GB Disk used: 54.37 GB
          Destinations:
                    MARIGOLD [Local] (Last used)
                    Total size: 319.73 GB
                    Total number of backups: 94
                    Oldest backup: 2012-12-27 18:56:31 +0000
                    Last backup: 2013-11-11 20:34:31 +0000
                    Size of backup disk: Adequate
                              Backup size 319.73 GB > (Disk used 54.37 GB X 3)
Top Processes by CPU:
               3%          WindowServer
               3%          Colloquy
               2%          EtreCheck
               1%          fontd
               1%          PluginProcess
               0%          loginwindow
               0%          SteerMouse Manager
               0%          warmd
               0%          coreservicesd
               0%          launchservicesd
Top Processes by Memory:
          197 MB             mds_stores
          164 MB             com.apple.IconServicesAgent
          147 MB             Colloquy
          147 MB             Safari
          131 MB             PluginProcess
          131 MB             Mail
          115 MB             iTunes
          85 MB              com.apple.WebKit.WebContent
          66 MB              Finder
          49 MB              ocspd
Virtual Memory Statistics:
          11.80 GB           Free RAM
          2.33 GB            Active RAM
          426 MB             Inactive RAM
          1.45 GB            Wired RAM
          394 MB             Page-ins
          0 B                Page-outs
If anyone has any ideas, please let me know? Thanks! I'm baffled here, or maybe I just don't know how to read the OS X Mavericks memory chart in Activity Monitor.

Those are all fine
Here is how to see RAM overloaded…
Reboot to see the system in it's default state.
Open TextEdit for the sake of it
Open Activity Monitor & Terminal from /Applications/Utilities.
Select the Memory tab
In Terminal enter the following command
memory_pressure -l critical
# note that is a lowercase L
RAM usage will climb, compression will begin the VM will become way more than the system has installed.
Eventually the system will start swapping (look for RED) - Watch the 'memory pressure' & 'Swap used' as this happens.
Try switching to TextEdit - the system is still coping !
Switch back to Terminal & hit ctrl+c to stop the process.
Watch the VM & memory pressure return to normal levels.
This OS kicks 4ss !
Your problems may lie elsewhere

Assign Logical System to client 000

I need to install Bw at SAP ECC 6.0, in doing so on the client 000 with the transaction RSA1, present the message that should be assigned System logical customer 000, it does not bring inconvenience to any future activity,
Thanks

Hi Victor,
If you're installing BW you shouldn't use cleint 000, create a new client...
Once you create the client go to transaction SALE and You'll see Create logical system ans assign logical system in the list.
First create a new logical system for the client to use... then assign the logical system to the client.
Regards
Juan
Please reward with points if helpful

Why is Firefox 12 using 2 000 000 KB memory?

Hey guys!
I have no clue as to why this is, but since I installed Firefox 12 it has been hogging memory like crazy! I admit that I am one of those people who like to have over a lot of tabs open at once. More often than not I have about 110 tabs open. This is because I like to do several things at the same time and I do a lot of researching on the web.
Only recently I had 125 tabs open. Now I have grouped these into smaller groups using Tab Group or the "Panorama". This helped a little, at first. I have also closed several of these tabs and narrowed this number to about 60 tabs.
At its peak it was using 2 000 000 KB of memory. Now it's more like 1 200 000 KB at most. I just restarted Firefox about 5 minutes ago and now this number is currently at 665 000 KB. It started off with about 400 000 KB and it is still raising as time goes by without me even doing anything with it. It just sits there and steals memory. :)
The memory usage raises to a point where Firefox becomes almost completely unresponsive. From time to time I have to wait a few seconds before I can even click in this very text field and continue typing.
I am using Windows Vista SP2, 64-bit, and 4093 MB of total physical memory according to the Performance tab in Windows Task Manager. So Firefox is using half of that memory.
What's going on here?
Also, this all makes the use of Tab Group feature almost impossible. It's very slow to open up the Tab Group or the "panorama". It is very slow and lagging.
I have an XFX Radeon HD5850 graphics card, so I wouldn't say it's due to a slow graphics card. This one is also factory overclocked. Other specs are 2.2 GHz Intel dual core CPU, X38 Intel chipset Gigabyte board, all SATA2 disk drives from Seagate and WD, 7200 RPM, top range. The memory modules are from Corsair, 667 MHz I believe, XMS with DHX.
Overall I think it's a good, solid performance desktop, and I have not had any major issues with resource hungry software except this time.
Firefox has been up and running now for some additional 10 minutes and the memory usage has increased to 695 000 KB. And counting... oh no, help, it's gonna blow up my computer! ;) It's gonna launch me into space...
Just a side note; I do use the hibernation mode a lot or the "sleep" button. But I have made sure it's not related to it by restarting Firefox several times and also rebooting to make sure to flush the RAM but it didn't help.
I do have a brand new 4 GB kit of the same brand and model that I never used up. I felt like 4 GB was plenty enough and decided to keep that second kit as a spare. So I could technically plug in that one to get 8 GB at most out of the computer. But I think it would be only counter productive... wouldn't you agree? I think the problem needs to be tackled at its core, not worked around of or swept under the carpet.
I must stop typing now... it's up at 731 000 KB now. I'm starting to feel the effects of it. Not even the memory hungry Photoshop Lightroom is using this much memory on this computer.

hello fractalogic, thank you for providing such detailed information. you have the firebug addon installed - although it is a quite powerful tool it is also known to cause some memory leaks at the moment (changes in the upcoming firefox version 15 will hopefully mitigate that). please try disabling it & only activate if you're want to use it and see if this is making a difference.
some plugins (firefox > addons > plugins) like java are also reportedly eating large amounts of memory on some machines.

Logical Systems for client 000 and 001

I've just install solman 7.0 ehp1 sr1 and am going to create a new client from 001.
Do I need to create logical systems for clients 000 and 001?
Do I need to creat rfc's for these?
Thanks,
Daniel

no, no need.
you will create a logical system name for the copied client (such as 100)

Firefox uses 100,000 K - 200,000 K memory even in safe mode; hangs and freezes periodically

In the past week or so I've been experiencing regular freezing and hanging, but only when Firefox is open. The freezing and hanging can affect other programs, but it always starts with Firefox. It can be either a) the browser stops responding, dims white, and the spinning circle appears, b) browser stops responding as does the task bar, can't click on any other open windows and sometimes the task bar dims as well, or c) the screen freezes entirely, with mouse movement not shown (although the mouse does move--it appears to freeze, but if I move it and wait, it'll be wherever I moved it) and if I was loading a page, the loading circle in the tab stops moving as well; it's as if a screenshot has been taken and replaced the screen.
I'm thinking this has to do with memory usage; Firefox uses 200,000 K memory normally, and starting in safe mode only drops it by 20,000 K - 30,000 K.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Logical path using in abap program

hay,
I want to create file in application server directory.
so i want the user to select the Logical path and file name from screen.so that he can create the file and seved in selected logical path.{path used must be from Instance profile DIR_LOGGING,GLOBALPATH directory etc).
could you pls tell me how to do this using parameter for user input selecting FILE PATH.
Do we have Functional module for Retrieving physical path
from logical path?
could you pls help me..
ambichan.

hey,
Thanks for your reply.
Instead of using logical file name as input, can we allow the user to select logical path using parameter?
I want user to select Logical path or logical file name from parameter. is it possible?
(I want to avoid user to input insteal want to allow user to select the path)
ambichan
Message was edited by: ambi chan

Creation of logical standby by shipping the redologs from physical standby

Hi all,
I have to create a logical standby database using redo shipping from my PHYSICAL STANDBY while it is in mounted state .Is it really possible to do it??
Please send me any docs regarding this to my mail id ([email protected])
Thanx in advance

It is possible to do what you ask by using cascaded destinations. See the Data Guard Manual (online at OTN) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14239/cascade_appx.htm#i636046
for the information. This relies on the standby creating and re-transmitting redo log data.
Hope this helps

Logical column using data source from 2 generations of same hierarchy

Hi experts,
I'm using Essbase as my data source in CEIM physical layer,
and I have a hierarchy called "Entity" which contains different level of companies,
in Generation 2 I have only one member called "group totals" and in Generation 3 are 5 members representing 5 different industries,
I need to use these total 6 members as slider on the top of the view(a Dial),
and the measure I want to show is scaled in rate, which I can't simply sum up those five members in Gen3 to get Gen2 measurement.
I tried to create a logical column using Entity-default(the alias table) as datasource, it worked but was not sorted in outline style.
I tried to sort them using calculate items in selection steps, but calculate items seemed cannot be shown as section or slider.
So I wonder if I can simply create a logical column that sourced from different generations(in this case, my Gen2 and Gen3) of same hierarchy,
is it possible to do such things?
Thanks for reply.

You could try General Database Discussions the main db foum.
What are you using to migrate your database? Why is it being mapped from varchar2(8) to varchar2(32). It sounds like someone/something is intervening here.
Barry

Logical schema can have one or more physical schemas

Hi Experts,
Can a logical schema in ODI will have one or more physical schema, if possible in what case do we have it.
In the same way can one physical schema have multiple logical schema if possible in what case.
Please give me your brief explanation on it.
Thx,
Sahadeva.

Hi Sahadeva,
1) Yes. You can map it through different contexts. The goal is to use the same logical schema to point to a different physical schemas for each environment (Dev, Test, PROD, ...).
So let's say you have a have the schema SH_DEV on database 1 for Dev and schema SH on database 2 for Dev :
- Create one SH Logical schema
- Create two data server : one for database1 and one for database2
- Create the physical schemas SH_DEV under dataserver1 and SH under dataserver2
- Create two context : Dev and Prod
- Map logical SH to dataserver1.SH_DEV through context Dev
- Map logical SH to dataserver2.SH through context Prod
2) Technically yes, through different contexts. Though I don't see any use case for this.
Hope it helps.
Regards,
JeromeFr

Logic 8 using only one CPU while bouncing

Whenever I bounce a project, Logic 8 uses only one CPU. It also spikes this CPU completely, with the CPU meter going into the red area, which is why I am rather keen on persuading Logic to distribute the load.
Any ideas?
(I've given the support document with tips on how to balance multi-core performance a good read, but it doesn't seem to say anything on this particular subject, and following the advice in the document does nothing to change my CPU load.)

Bouncing is a single core process. Just like rendering is in Final Cut Pro. This won't change until Leopard and Apple's ProApps get better at handling multiple cores.
It's redlining because the processor core is working as fast as it can. Computer processors don't just randomly run slower, they use their resources for the tasks at hand. If it only used 50% of a core, the bounce would take twice as long to process.

LSMW Logical file 'CS_BI_BOM_CREATE' is not assigned to physical file

Hi all,
I am creating LSMW tool for BOM by standard batch input program.
In the specify files push button i m getting this error
Logical file 'CS_BI_BOM_CREATE' is not assigned to physical file 'LSMW_C_MDM.119_MAT_BOM_001.lsmw.conv'
Message no. /SAPDMC/LSMW_OBJ_060045
anybody know how to proceed?
If i am going to Tcode - file and setting this one then i require a change request.
Is this the right way to proceed by changing it in "file" tcode.
Tell me all possible options.

Hi,
double click on row Converted data with file 'LSMW_C_MDM.119_MAT_BOM_001.lsmw.conv'
enter in field Logical Path: LSMW_C_MDM.119_MAT_BOM_001.lsmw.conv
enter in field Logical File: LSMW_C_MDM.119_MAT_BOM_001.lsmw.conv
and SAVE
the second option is go in transaction file and create the missing 'LSMW_C_MDM.119_MAT_BOM_001.lsmw.conv'
Regards Vassko!

Problem while creating logical port using soamanager

Hi all,
I have created a client proxy for web service from a 3rd party system.
When i am creating a logical port for the same consumer proxy i get a error as follows:
RABAX_STATE -e: UNCAUGHT_EXCEPTION
and a dump saying
" The exception 'CX_SXMLP' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program
'CL_SXMLP_FRAGMENT=============CP' has to be terminated.
Please suggest what can be done or what can be the problem.
Thanks in advance.
Komal

Pls go to txn SM59 and check if the RFC destination for webservice is working in the test connection.
Then go to txn LPCONFIG and create the logical port using the RFC dest. Pls mention the path suffix appropriately.
Next in your code while instantiating the client proxy pass the logical port name in the constructor (if the LP is not maintained as default).
Pls reward points if the tips are helpful.

What's the maximum RAM logic can use?

As we all know, the Mac Pros can sport up to 16 gig of RAM. The question is.... how much ram can Logic use?
I use piles of samples so i'd love to stick 8 gig in the mac pro (that i haven't bought yet)
Is it pointless to spend all that cash?
If it can only use 4 gig currently, (as i hear most apps do)
has anyone heard of plans to upgrade logic to use more?

I'm pretty sure that the MAC I have right (Dual 1.8 G5) now will use up to 8 gigs.. I have 5.5 in there right now. I'll try tonight and see if I can max the usage up to 5.

Help - home set up on Imac using logic 8 using Alesis multimix 8 usb mixer

Hi all
Can anyone give advice as to how to i can use my multimix with logic pro on my imac. What im trying to do is get logic to use the inputs from the mixer and then use both the internal speakers as well as sending the signal back to the mixer so as i can use the phones to monitor everything.
Can anyone help please as im tearing my hair out now
PS - i am using logic 8 studio
Thanks all

My system is different, but I'm doing basically the same thing you want to do, with one minor difference.
I have a Yamaha 01V96 with three internal ADAT I/O banks feeding a Presonus Firestudio Lightpipe.
The 01V96 does all of my input/output a/d-d/a conversions. The system looks like this:
01V96-->Presonus Lightpipe-->(Firewire out) into the Mac Pro.
All of my audio goes through the 01V96. The Mac's internal audio is not used. The 01V96 outputs feed a pair of Alesis Prolinear 720DSP speakers.
I think you will either have to attach your speakers to the mixers outputs and not use the internal audio, or you'll have to go into your audio/midi setup and switch from one to the other as the need arrises. I don't think you'll be able to have both of them active at the same time.

Logic is using 16.000.000 TerraByte physical Ram??? See picture:

Similar Messages

Maybe you are looking for