Logic mountain lion

Hi, after the upgrade to Mountain Lion, I have some problems with Logic Pro expecially with its plug-ins..
Every time I open one Logic's plug-in it doesn't answer to my command and I can't change parameters..
I can't also Stop the song and I must wait everytime the end of the entire song..
I found a short way to resolve that but it's not a right way..
I open the Dashboard pages and then I return to the Logic pages and everything works..
I know that this problem is the same for some peoples...
I'm waiting for your help or for an Apple's upgrade..
I'm sorry for my english!!
Nicola

It is entirely the decision of the 3rd-party software developer - hence, his responsibility - which OS and its versions his software or plug-in is compatible with.
You are mentioning that you have contacted them, and that's the best, if not the only, thing you can do other than sit and wait.
The other way around, if you depend on 3rd-party software or plug-ins, it's always wise to make sure that their versions are up-to-date and fully functional with a new OS before you switch to it. Sorry, but you having been lucky in the past doesn't mean it must always be so. And sorry again, but you can't blame Mountain Lion or Apple for it...

Similar Messages

Altiverb 6 not working in Logic/ Mountain Lion

I just bought the new 27" iMac and used Migration Assistant to transfer over all my stuff from the old iMac. In the past this has always proved successful, but I'm experiencing some problems with Logic. Specifically, Altiverb ( 6 ) won't work, no matter what I try, and I've done all the usual Audio Ease-recommended "tricks", like opening Logic in 32 Bit and manually getting the AU manager to pass Altiverb. In the past this always worked, but not so in Mountain Lion. In fact I tried downloading Altiverb and the IR installer, to reinstall, but they refuse install in Mountain Lion! I keep getting error messages on both counts.So far, so bad, then.In all other respects Logic seems to be fine, though I haven't actually run it yet; but I mean that other third party plugins work fine.
So, while I'm waiting for a reply from Audio Ease support, I wondered if anyone out there had an answer to what might be happening here,please? It's puzzling and annoying. I heard bad things about ML and Logic, but, then, I also heard that everything is OK from other quarters. Right now, I'm on the fence, because other plugins seem fine, though the Kontakt Memory Server doesn't want to work in ML right now.
I understand that one will usually encounter some issues when starting out on a new OS, but I really never had any problems like this in the past, even when using Migration Assistant....
Thanks..

It is entirely the decision of the 3rd-party software developer - hence, his responsibility - which OS and its versions his software or plug-in is compatible with.
You are mentioning that you have contacted them, and that's the best, if not the only, thing you can do other than sit and wait.
The other way around, if you depend on 3rd-party software or plug-ins, it's always wise to make sure that their versions are up-to-date and fully functional with a new OS before you switch to it. Sorry, but you having been lucky in the past doesn't mean it must always be so. And sorry again, but you can't blame Mountain Lion or Apple for it...

Logic Express wont open Because of mountain lion!

recently upgraded to mountain lion, and noticed shortly after that logic express 9 will not open in any form.
please help me get logic express running again!

Hi
You seem to have double posted?
https://discussions.apple.com/message/21033857#21033857
CCT

Logic 9 + Mountain Lion = Performance Problems

Hi,
After months of debating to upgrade to Mountain Lion, I did it (and regret it like iOS 6).
I'm just wondering if anyone gets the issue with Logic 9, where it works for around an hour no problems, then the CPU meter goes mental and causes glitching in the audio no matter what I/O buffer size I choose, or what sample rate my projects in, OR how many plugins/instruments I have open?
It's really starting to affect my clients as to solve the problem the OS needs a full reboot.
I am fully updated in Software Update and it worked perfectly until Mountain Lion.
Hope there is a solution!
Tim

Your question is too vague... More details are required...

Logic Pro (9.1.7) fails to open in OS Mountain Lion

Hi,
After replacement of HD (made by authorised Apple dealers) and installation of Mountain Lion, Logic Pro will not launch; Message: Logic Pro failed to open.
The following problem report pops up on launch;
Process:         Logic Pro [329]
Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier:      com.apple.logic.pro
Version:         9.1.7 (1700.57)
Build Info:      Logic-17005700~1
Code Type:       X86-64 (Native)
Parent Process: launchd [134]
User ID:         501
Date/Time:       2012-09-22 13:20:44.394 +0200
OS Version:      Mac OS X 10.8.2 (12C54)
Report Version: 10
Interval Since Last Report:          43947 sec
Crashes Since Last Report:           24
Per-App Interval Since Last Report: 54 sec
Per-App Crashes Since Last Report:   24
Anonymous UUID:                      D51AEAA7-2138-B40B-EF9D-2997F3B14EDE
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
VM Regions Near 0:
-->
    __TEXT                 0000000100000000-0000000100c16000 [ 12.1M] r-x/rwx SM=COW /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.CoreFoundation                0x00007fff8f38761a CFArrayGetCount + 10
1   com.apple.logic.pro                     0x00000001006a54a8 std::_Rb_tree<TPureClock, std::pair<TPureClock const, EuControlSwitch*>, std::_Select1st<std::pair<TPureClock const, EuControlSwitch*> >, std::less<TPureClock>, std::allocator<std::pair<TPureClock const, EuControlSwitch*> > >::insert_unique(std::pair<TPureClock const, EuControlSwitch*> const&) + 125528
2   com.apple.logic.pro                     0x00000001001b0d4d std::vector<TTempoWarpMerge, std::allocator<TTempoWarpMerge> >::reserve(unsigned long) + 174029
3   com.apple.logic.pro                     0x00000001005c46b4 std::_Rb_tree<std::string, std::pair<std::string const, TOSCMessageData>, std::_Select1st<std::pair<std::string const, TOSCMessageData> >, std::less<std::string>, std::allocator<std::pair<std::string const, TOSCMessageData> > >::insert_unique(std::_Rb_tree_iterator<std::pair<std::string const, TOSCMessageData> >, std::pair<std::string const, TOSCMessageData> const&) + 319188
4   com.apple.CoreFoundation                0x00007fff8f3bd47a _CFXNotificationPost + 2554
5   com.apple.Foundation                    0x00007fff95c07846 -[NSNotificationCenter postNotificationName:object:userInfo:] + 64
6   com.apple.AppKit                        0x00007fff8b68360d -[NSApplication _postDidFinishNotification] + 292
7   com.apple.AppKit                        0x00007fff8b683346 -[NSApplication _sendFinishLaunchingNotification] + 216
8   com.apple.AppKit                        0x00007fff8b680532 -[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:] + 566
9   com.apple.AppKit                        0x00007fff8b68012c -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 351
10 com.apple.Foundation                    0x00007fff95c2112b -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 308
11 com.apple.Foundation                    0x00007fff95c20f8d _NSAppleEventManagerGenericHandler + 106
12 com.apple.AE                            0x00007fff92352b48 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 307
13 com.apple.AE                            0x00007fff923529a9 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 37
14 com.apple.AE                            0x00007fff92352869 aeProcessAppleEvent + 318
15 com.apple.HIToolbox                     0x00007fff951428e9 AEProcessAppleEvent + 100
16 com.apple.AppKit                        0x00007fff8b67c916 _DPSNextEvent + 1456
17 com.apple.AppKit                        0x00007fff8b67bed2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
18 com.apple.AppKit                        0x00007fff8b673283 -[NSApplication run] + 517
19 com.apple.prokit                        0x000000010120d324 NSProApplicationMain + 378
20 com.apple.logic.pro                     0x000000010002a638 DummyConnection::DummyConnection() + 86
etc.
Anyone encountered the same problem, and have a fix?
Thanks in advance.
Stein Johnsen

I'm experiencing exactly the same issue... fresh install of Logic Pro, fresh update of Mountain Lion, everything up-to-date. Logic Pro crashes on start every time. I've trolled a number of forums and seen lots of references to ProKit.framework being the culprit. Some recommend downgrading this, but then there could be trouble with iPhoto and other apps. Some recommend waiting for the next OS update. I can't find a conclusive solution.

Problem opening logic 9 in Mountain Lion

Hi there
Just bought a new 13" Pro and wondered if anyone else has had problems opening Logic in Mountain Lion.
The whole of Logic Studio has been successfully moved across with Migration asssistant, except Logic Pro itself whichwon't open because:
'You can't use this version of the application "Logic Pro 9.0.0.app" with this version of OS X.'
Problem is when I I try to install the update 9.1.7 I get the message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.
I also get this message when trying to install the 9.1.7 update on my old MacBook Pro, which has the original version of Logic 9.
Any suggestions?

Post in the Logic Pro forum area.

Retrieval of Logic Pro 9 Serial Number after reinstallation of Mountain Lion

Help! I have a Macbook pro (2008- 15") which was getting very cluttered. So I made sure that all was backed up on Time Machine, I did restart cmd R, erased my hard drive and have reinstalled Mountain Lion from the internet. The reason for doing this was to reinstall just my music programmes, but this has not been straightforward.
In trying to re-install Logic Pro 9 (which was an upgrade from 8) it has asked me for the serial number which I CANNOT FIND ANYWHERE. I bought 9 from Regent Street in 2009, but cannot find the email that comfirmed purchase. Logic 8 I bought direct from Apple in 2008 on educational discount, and I do have an Apple ID. However record of purchases kept online seem only to go back 18 months. What can I do??

If you have no proof of purchase and no longer the original manual with the serial number, I think you are out of luck.
https://www.apple.com/support/proapps/serialnumbers/

Logic Pro 9 will not start in Mountain Lion

I have gotten so much great info here, that I thought this would be the best place to ask my question. I am using a Mac Pro 3, 1 (early 2008). I bought the machine running Leopard, upgraded to Snow Leopard, lion, and Mountain lion with no problems. I have a valid license for logic studio eight and nine. Logic ran without problems… Until I upgraded to Mavericks. After upgrading, my computer started acting terribly. It was much slower, and I would get these terrible freezes where the screen would go kind of crazy flashing colors and stop working completely.
After thinking it was my graphics card, and not wanting to spend $1 million on a new video card, I decided to try downgrading back to Mountain lion.
First, I cleaned off the system drive, and installed mountain lion fresh from a USB drive. The crashing went away and the computer ran much faster and smoother.
However, after reinstalling logic, I am no longer able to start it. As soon as I click on the icon either through Finder or a dock menu, it crashes almost immediately. It has never gotten to or through the part where it scans the plug-ins or anything. I tried to understand the report it generates, and understand the things that it is trying to tell me, but cannot make any sense out of what it is actually saying happened. I have updated the app as well. I am currently at 9.1.8.
I don't know why this is happening, and don't know what the best next step should be. I already have everything moved out of the way if I need to do another fresh install. I was thinking to try a fresh install on a clean drive of Mavericks, and see if anything changes. Also, when I would try to change logic to start in 64-bit mode, there would be no option in the "get info" window to select or deselect 32-bit mode. It simply wasn't there.
I can post specs/logs/error reports of course, but don't even know where to start. Does anybody have any experience with this? Does anybody have a suggestion for where to start? Do I need to get Logic X? (Logic was running fine in Mountain Lion before) I have scoured the Internet trying to find someone with similar issues, but haven't found anything that works. All I have really tried is reinstalling both the OS and the app. Everything else works great in Mountain lion. I still have my Snow Leopard disks if you think going all the way back there would be the best option. My OS is running in 64-bit mode, but when logic does try to start, it says 32-bit mode in the little start up window.
I'm totally comfortable with Terminal, Console, etc, so can provide any info if anybody thinks they may be able to direct me towards a solution.
Thanks for reading and thanks for any help or advice.

kcstudio
Must be my chipset then, although another Mainstage board told me otherwise. (that it was the OS)
When I upgraded my Duo2Core MBPro to Mavericks, I too lost Logic 9.
I'm pretty much done with Logic 9, and pretty happy about the new Logic X, and happy that it works on ALL of my machines.

The logic board of my macbkpro 10.6.8 (OS ML) has died. I want t migrate info to another McbkPro (OS Snow Leopard) but is asking me to update to same OS. Can I update the latter to Mavericks and migrate the info from Mountain lion? thanks

Hi i took my macbook pro to an apple store because it would not start correctly. The veredict was that the logic board was dead. As this is a very expensive item to replace, I have decided I will buy a new one but I am currently overseas, and will wait a couple of months when I get back home. This is a macbookpro 15 inch early 2011, running on Mountain Lion OS. I have another macbook pro 13inch running on snow leopard. At the store we tried to migrate the info using an ethernet cable (using the "T" command on startup) but the system asked for an update of the OS. The guy at the store told me I had to update the OS so that the two macs would be on the same OS - mountain Lion. As the newest (and free) OS is Mavericks, I wonder wheather I coud update the 13 inch mac to mavericks and perform the migration. The guy at the store was explicit to say that if the OS were different it would not work. But reading on the apple website it seems that mavericks support this kind of migration altough is not explicit about it. Can you please help?
thanks

Hi BobRz,
As this is a new issue for me, I believe I had the incorrect approach, maybe you can help me. What I want to do is recover a few files in my desktop, and some information i had on the iCal application and the Mail application as well.As I do not want to do a full migration into this computer (which is not mine) I believe that starting the damaged MBP in Target mode should allow me to search and cop the files I need. But:
1. Can I open the Ical and mail apps to look for the info I need while reading it as an external HD ?
2. Do the target machine (my friends) still need to be updated to ML o Mavs so that it recognizes my MBP as an external drive if starting it in Target mode ? (no migration assistant)
Thanks.

"Mouse Over" issues in Logic Pro - Mountain Lion

Hi,
Since I upgraded to Mountain Lion, I spotted an issue with Logic Pro (Logic 9).
In the Arrange window, when pointing the mouse at the end of a region, the pointer icon doesn't change to the looping (upper right corner of the region) or resize (lower right corner) icon.
As a result, those functionalities (looping and resizing regions) are gone.
Anyone having the same issue?
Is there a way to solve this or do we need to wait for a Logic Pro update to get these back?
Thanks in advance,
A nice day everyone,
Vince

Vlvl wrote:
As it's the only problem I have noticed since the upgrade, and as I mentioned in my last post, looking like a minor problem to me, I will keep Mountain Lion.
But anyway, thanks for the advice, Ivan.
Vince
No problem, as a professional musician using Logic I learned that lesson the hard way first time around. Hard as it was to not have the toys I soon learned that stability ruled the day....

Can you install Lion over the top of Mountain Lion to get rid of these awful Logic glitches?

Folks -
I too have experienced the 'help! Logic is running away with itself and won't respond to me' scenario. I thought it was just me at first... I know there are several other folks that are having other problems ranging from annoyances to show-stoppers.
In my case, the biggest problem is that my Mackie Control (original; version 1.02)that has worked flawlessly in the past is plagued with the following symptoms:
Frequently is not detected or initialized when Logic starts up. This always worked prior to Mountain Lion.
If it IS detected, it will get a MIDI download from Logic so that all of the screen text and values come up, but none of the input functions (i.e. raising/lowering a fader on the control surface) are picked up/executed by Logic. I have tried different MIDI ports and cables and no change in the problem.
This control surface is pretty important for my workflow. I am seriously considering downgrading back to Lion, if it's possible.
Does anyone know if it is possible/safe to install Lion back on top of Mountain Lion? The glitches in Logic with Mountain Lion have made the system unstable and fairly unusable.
Thanks!
Pete

Turns out that the problem REALLY WAS MOUNTAIN LION!
I had a clone of my Mountain Lion disk in my Mac Pro. I do a full clone every night, so I booted from that, and erased my primary disk.
Then, I used Time Machine to go back to just before I installed Mountain Lion and then booted from the Lion DVD that I had made when Lion launched (see Google for this). I recovered to my erased disk, and 2.5 hours later I had a full 10.7.4 system up and running on my primary disk. This WORKS!!! I have just tried Logic, and the problems I was having disappeared. The Mackie Control surface is now responsive, and I'll bet Logic doesn't run away anymore either. Great tools - Carbon Copy Cloner (I'm a registed user) and Time Machine saved my butt.

Mountain lion crash when opening logic photobooth and lost all my music in itunes.

Why are apple apps crashing in Mountain Lion. Logic, Photobooth, iphoto and lost all my music in Itunes?

you might need to reinstall ML from the Recovery Partition.
To get to the recovery partition restart your computer, hold CMD+R down when you hear the boot up chime. Open Disk Utility first (verify your boot disk and repair if needed) and then close it and reinstall ML.

I have Logic Studio 9.0 media set but need to install onto new Mountain Lion iMac. Migrating from older OS will allow free upgrade from App store but I don't want to migrate due to other issues. How can I install this?

We have a valid serial number and the original 9.0 media set. When I tried migrating the App Store updated it free of charge. However I don't know how to get Logic on without migrating as it point blank refuses when I insert the install disk.
Thanks.

Hi
Something is not quite right here:
I have the original Studio 2 disks here, and the installer runs fine under OSX.8.3. It will install Logic Pro 9.0.0, which can then be updated by downloading the 9.1.7 or 9.1.8 updater from Apple Downloads.
On your system, the installer refuses to run, or does the install proceed, but you are unable to update Logic so that it will work on Mountain Lion?
CCT

I'm struggling to install Logic Pro 9 upgrade on Mountain Lion

Way back we bought one of the last pre-Intel G5 in order to do music processing. We also bought Logic Studio v6 or 7. Then we upgraded to Logic Studio 8 and later decided to use a macbook pro instead of the G5. So far so good. We then upgraded to Logic Pro 9 and can run this on Lion on the Macbook Pro.
My partner is now working away and takes his Macbook with him, so we want to set-up Logic 9 on my macbook pro which is running Mountain Lion 10.8.4. Once this is done we will take it off his machine, so not pirating in any way.
I have managed (at great length) to install Logic Studio 8 on my machine using Pacifist, and I can open it and create projects etc... I now want to install Logic Pro 9 on this machine but I get a message saying that a qualifying copy of Logic or MainStage was not found on the disk. To complicate matters, we can't find either the logic pro 9 disk or an image copy, so I downloaded from the following link:
http://dl.dropbox.com/u/2972851/logic-downloads-fixed.html
which I found in this thread: https://discussions.apple.com/thread/4948612
I have already spent many many hours fiddling with this, does anyone know how I can get around this problem?

Im using LPX and have found it to work well.... and no less stable than LP9 in terms of general stability. There are some bugs but given we are still in the early stages of development, that is not surprising and is no different to how it was with LP8 and 9 in their early days. I should add I haven't come across any "showstopper" bugs that affect my own personalo workflow and method of using Logic... just a few niggles and minor annoyances... that for the most part can be worked around if they haven't already been fixed in the 3 updates that have come out since initial release.
I have had no real issues with importing LP9 projects into LPX other than of course, the lack of 32bit Plugin support in LPX which means LP9 projects that contain 32bit plugins.. will not fully import into LPX. The midi/audio data imports ok.. the 32bit plugins will be missing however... if you don't have equivilant 64bit versions installed. For me, this issue has been very minimal simply because almsot all the plugins i use, have already been updated to 64bit versions over the last few years.
There has also been an issue with certain parameters in the track/region Inspector after import into LPX, containing weird values.. I have only had this issue once out of maybe 40+ LP9 Projects and in this one case i simply reset the values and all was well. Other users have reported different levels of how often this occurs.
Note: Once a project has been opened and then resaved in LPX the LPX version cannot be opened in LP9 as project compatibility is only backwards and not forwards.
If you cannot find your disk and serial..(which you will also need) Contact Apple as they may be able to provide you with replacements disks if they have any left. Bear in mind if, as it appears, your LP9 is an upgrade from LP8 you will also need your previous LP8 serial as well as your upgrade LP9 serial to properly install Logic on a new Mac. Once installed you can and in fact must... then update LP9 to 9.1.8 via software updates in LIon or Mountain LIon... for Logic to under those OS versions.

Will upgrading to osx mountain lion upgrade my Logic Pro 9.1.6 to 9.1.7?

I wanna know if upgrading m computer to osx mountain lion will upgrade my Logic Pro to it's current update to 9.1.7.
I wanna upgrade to the new osx im worried if it will update all my software as well

First, you can (and should) always back up your copy of Logic before updating, that way you can always go back to the earlier version if you need it. If you do that you might as well update to the latest version of Logic.
Going to 10.8 won't update Logic, but you'd probably want to update Logic (and most other apps) to the newest versions if you do a major OS update like that.

Logic mountain lion

Similar Messages

Maybe you are looking for