Logic Node....

No offense. the Logic Node is pretty much useless unless you're using the stock sounds that come with logic. You can't node the effect heavy Space Designer plug in or the EXS24, probably the two things the most of us use the most...
They should work on an improvement for this for Logic 8

Nodes have no knowledge of whatever samples or IR's that you are using. That would require you to install all of these on each node. The last thing I feel like doing is putting and extra 40 or so GB on a node for this. Perhaps, consider how you are using these plug-ins first. If you don't need that many voices on the EXS, turn them off.
As far as "stock sounds", if you are referring to the plug-ins, the same answer applies as does the samples and IR. VI's however, will handle whatever setup you throw at them and the nodes will as well.
jord

Similar Messages

  • Logic node 9.0 update

    Is there a update for Logic 9.0 node? This is used when you have multiple computers on the same network. I am currently running Logic pro 9.1.5 and the node does not work. I went back and open logic 9.0 and the node worked. Need update for Logic Node 9
    Mac OX
    Thanks

    I just checked and my node version is 9.1.5 matching the Logic app.  If you update with the Software Update app, it should probably update automatically so maybe your node app was in the wrong folder or renamed?  Make sure it's in the right spot, I doubt SU will show the Logic update again but you can try downloading and running the updater again to see if it updates your node app.
    http://support.apple.com/kb/DL1014

  • Logic node keeps quitting

    Im running LP7 on a dual g5 2.7 and a Logic node on a MDD DP 1.25 G4 with 2 gigs of Ram but the node app keeps quitting.Im only using the node on tracks which have only logic au's and fx etc(not a mixture of 3rd party and logic plugs) but logic node quits halfway through playing an 16 bar loop.The node cpu meter is barely touching a quater of the way up so I dont understand this.Anyone??BTW Im runnig 10.4.2 on both machines and all the latest updates etc

    While the problem does appear to be Kontakt 5 related... the actual problems seems to be to do with disk access and steaming/buffering data from the disk rather than Kontakt 5 itself...
    This can be caused by a lack of RAM... (You have a large number of K5 instances all trying to run in just 6GB of RAM)
    or...
    A problem with the Hard Drive-SSD you are using thats unable to properly  keep up with the demands being made on it or the CPU/Memory......
    In other words you might just be pushing your system too far given the small amount of memory you have on board...
    I see you spent good money on an SSD but frankly your Mac would benefit much more from extra RAM (at least 16GB... and 24/32GB would be even better) than any boost in performance a small 128GB SSD would provide...
    Also.....
    Your Waves plugins are several updates behind the times... Get them updated to the recent Waves 9 r19 release as they too, can cause issues that can cause K5 to crash under certain circumstances...

  • Linking 2 computers with Logic node, anyone try it?

    Has anyone established a way to utilize 2 computers side by side to share the processing with logic?
    I have a macbook intell and a non intell mac mini, can anyone advise on this set up?

    I think your question is legitimate because I've
    never found any mention of using Logic Node between a
    PPC and Intel machines in the manual.
    Hi,the reason you do not see mention of Intel in the Logic Pro manual...is because it was written before Intel chips were available on the Macs.
    However, I've read that this is possible.
    The latest version of the Node app,WORKS across Intel and PPC platforms.I use it every day,my main machine is an Intel MackBook CoreDuo 2gHz,and my slave is my G4 PPC iBook.
    In your case, the problem would be the Mac Mini, because you need to
    have computers with Gigabits ethernet ports and the
    Mac Mini come with standard 10/100.
    FALSE!!! NOT TRUE!!! While Logic recommends the use of Gigabit Ethernet to run the node app,you only need it on the HOST computer.And if you are running more than one slave,then it IS neccessary to use a Gigabit Ethernet Hub,in order to be able to have enough bandwidth to avoid problems between the host and slave computers.
    BUT you CAN use any mac with an 10/100 ethernet protocol as a SLAVE NODE.It just will not give you as much horsepower as the Gigabit protocol (100 kbits VS 1000kBits...)
    You could,for instance,have a G5 with Gigabit Ethernet,going to one 4-port Gigabit Ethernet Hub,and that going to 4 Mac of any kind,either 10/100 OR Gigabit.
    Cheers

  • What is Logic Node app and do I need to install it??

    i just purchased an upgrade of Logic studio.
    in the install CD there is a folder called Logic Node and and install for it.
    what is that and do I need to install it?
    any help is greatly appreciated.

    I really recommend spending a few minutes searching this forum before posting another question already answered just a few threads down. Often it will save the hassle of typing out your problem and waiting for an answer...
    See here:
    http://discussions.apple.com/message.jspa?messageID=8684286#8684286

  • Logic Node 9 not working with mac mini

    MBP late 2008 4gb ram 500gb hd + New Mac Mini 2009 Base with 1gb ram
    Logic Node installed - settings under audio checked... etc
    Node working (slightly) see picture
    I had to unplug the edirol keyboard, brother laser printer, fw800 drives, 3 usb hard drives, external alu keyboard griffin powermate and turn off airport to get working.
    then after it was working I would still get overload messages (see below)
    barely sending anything to the node...
    [IMG]http://www.musicrowsongs.com/logicnode.jpg[/IMG]
    any ideas?
    thanx
    michael

    1.) when node not working it appears to be the fw800 drives
    2) when it does work - no major node processing
    [img]http://www.musicrowsongs.com/logicnode2.jpg[/img]
    Using a lot of high end waves plugs
    mercury v6r7 - perhaps Maserati - API - SSL not going into the node? Why?

  • Logic Nodes Tab Disappeared from Preferences??

    After updating to the latest 9.1.3 update I no longer see the Logic Nodes option. I have the Node app booted on the Node system connected by Gigabit ethernet. Please advise if anyone has had this issue and knows what I might need to do to fix this.

    ...alright, no 64 bit support

  • Logic Node- MacBook Pro and iMac G5

    Hi all,
    would it be possible to link an iMac G5 (Rev 1) (PPC) to a MacBook Pro (INTEL) in order to use Logic Node?

    Yes, it should work fine. Just make sure you use the same node version as your logic pro.
    (I node my MBP to my MDD G4)
    MBP 1.83 & MDD 1G DP   Mac OS X (10.4.6)   Logic Pro 7.2.1, Motu 828MkII, LC&XT, Tranzport, Unitor8+(3x)AMT-8's

  • Logic nodes over switched ether-network?

    Hi,
    I'm planning to setup a 3-mac network as well as takng the leap from to Logic from Cubase.
    Can anyone tell me if the Logic-node system will work over an ether-network (via a switch) or does it have to be a direct Mac-Mac connection?
    Also, over what length cable run might latency be introduced?
    I may also want to use FX-Teleport over the network when it becomes available for the Mac. The same questions apply...will it work via a switch?
    And at what point might Midi/Audio latency be an issue?
    Thanks in advance.
    Colin

    Colin, just to reassure you, I just bought a cheap D-Link 10/100/1000 8 port switch and replaced by old 10/100 one. I replaced the two cables (Powerbook and G5) with proper Cat5e ones and my node works just fine at opposite ends of the house. Luckily the house wiring I installed was Cat5e already. For some reason Logic has trouble compensating for latency on the EXS24 sampler, but all the other processes seem to have no latency at all. I tested the two machines in the same room with 1 metre CAT5e cables, and the latency is exactly the same. One thing to watch is that even when Logic tells you that it is processing particular tracks on the node, it actually doesn't seem to lessen the CPU load on the host until it absolutely has to. One particular song of mine has about 80% CPU on my Powerbook, and at one point in the song would very often stop with an overload message. Now with the node engaged it STILL shows 80% host CPU, but the difference is that when I reach the dangerous part, Node activity shows up on the meter, and I don't get the error. Cool!

  • Logic Node vs 64bit

    Seeing as Logic Node will only run in 32bit, which option will give better performance? 
    32bitLogic with Logic Node running on a separate computer or 64bitLogic without Logic Node?
    I use my Mac Pro as my main work computer and I'm trying to set up my Macbook Pro as the Node computer. Specs below.
    Thanks in advance!
    MacBook Pro, OS X Mountain Lion (10.8.5), 2.6 GHz Intel Core i7, 8GB
    Mac Pro (2006), OSX 10.6.8, 2 x 2.66GHz Dual Core Intel Xeon, 6GB 667 MHz DDR2 FB-DIMM
    Logic 9.1.8
    Logic Node 9.1.8

    +1 on VEP
    I use it daily and its a wonderful tool to add to your 'arsenal'... and provides so much extra and stable functionality that Node ever did... in both 32bit and 64bit modes with LP9 and LPX... I gave up using Node a few years back because of its limitations and it's instability...
    You might find the following info useful...
    http://www.logicprohelp.com/forum/viewtopic.php?t=78956
    http://www.logicprohelp.com/forum/viewtopic.php?t=77515
    http://www.filmmusicmag.com/?p=8725
    https://www.youtube.com/results?search_query=vienna+ensemble+pro+5

  • Can't get Logic nodes to work

    I'm using a 3.06 GHz iMac and want to connect it to my 2.8 GHz MacBook Pro. Both Macs are have OSX 10.6.8 and the same versions of Logic and Logic node (9.1.6). I can't seem to find any current documentation (even in the manual) of how to set it up. I was watching a macprovideo.com video on Youtube. Very well done. Until I went to open audio preferences on my host machine and there was no "node" tab.
    file://localhost/Users/markalexander/Desktop/Screen%20shot%202012-02-07%20at%201 1.31.24%20AM.png
    Under "Configure Track Header" there is no option for viewing the node buttons. Perhaps the vid tut on Youtube was using Logic 8? I couldn't tell. Can someone help out?
    file://localhost/Users/markalexander/Desktop/Screen%20shot%202012-02-07%20at%201 1.31.52%20AM.png
    I'm trying to use 3 instances of Ivory and the imac is sluggish. I have Ivory on the Macbook. Is this even necessary? There seems to be some disagreement on this.
    Thanks in advance!
    Markoman

    Hi
    You may want to check out Vienna Ensemble Pro as a solution for using additional computers as slaves
    http://www.vsl.co.at/en/65/71/1988/1677.vsl
    CCT

  • Logic 8 - NODES - Tiger / Leopard

    I cannot get my Logic NODE to work properly, and while I am actively troubleshooting,
    I wanted to ask:
    Has anyone out there successfully used a G5 running Tiger and Logic 8 as main machine,
    and then used an Intel Macbook running LEOPARD as the Node?

    I got impatient, so I downgraded my macbook back to 10.4.11.
    The nodes 'kinda' work, but really only with Sculpture so far.
    Any 3rd party AU's at all (including plugins that are installed on both computers)
    gives me instant glitchy audio.
    so for me thus far, it's not a network problem, not a cable problem, not a leopard problem anymore.

  • Logic Pro 9 Node doesnt work

    I run Logic Pro 9.1.6 on my MacBook Pro 2,8 GHz Intel Core 2 Duo with Mac OS X 10.6.8.
    The MacBook for the Node is a MacBook (in Black) with Mac OS X 10.7.2  and 2,4 GHz Intel Core 2 Duo.
    I configured a Network Connection, and i can ping each Computer. But in the Logic Node Tab none is displayed.
    I run the Logic Node on the Node Computer and Logic Pro on my Main Computer, is that correct?
    Do third-party Plugins have to be installed on the Node Computer as well? Could this be the reason why the Node is not available?
    Or is the Black MacBook too old in general?
    Hope you guys answer me soon

    Update:
    When you download Logic Pro from the AppStore the Node Extension is not part of Logic anymore.
    Logic ***** more and more to me and it seems like Apple is leaving the pro business, only caring for consumers....

  • Logic Pro "nodes": Does Final Cut Pro have this feature?

    Hello everyone,
    Let me first say that I'm a film music composer and mainly use Apple Logic Pro, so please bare with me. However, I'm working on a current project where I get to do some editing with FCP, and have a quick question.
    In Logic Pro, there is an option to hook up multiple computers via ethernet and use their processors to help process Logic plugins. This is done through installing a program called "Logic nodes," and whenever the secondary computer is running this program, I can assign specific tracks of audio effects to be "farmed out" to the "node" computer, freeing up my main CPU for other plugins. Keep in mind this is all done in real time within Logic itself! WAY COOL!
    Is such a feature is available for FCP for rendering while editing? I believe you are able to farm out rendering with "compressor," but is there a way to do this for "real time playback/editing" within FCP itself?
    Thanks in advance for your help and reply!

    Nope.
    x

  • How do you completely remove all Logic/Soundtrack/etc content in it's entirety?

    I've been trying to find out for hours where these **** files are hiding. I've just tried to install Logic 9 with all the additional content when my installer failed at the last moment and left everything strewn uselessly around my system. I've deleted all the files I can find associated with logic.
    I have deleted all these files, except ones in red I can not find (because this is from a guide in 2009 and I'm running mountain lion so the extentions are different), though I am still missing 30 odd gigs of space on my harddrive, where is all this audio content hiding???
    Application Files
    /Applications/Compressor
    /Applications/Logic Node
    /Applications/Logic Pro
    /Applications/MainStage
    /Applications/Soundtrack Pro
    /Applications/WaveBurner
    /Applications/Utilities/Apple Loops Utility
    /Applications/Utilities/Impulse Response Utility
    Factory Settings, Instruments
    /Library/Application Support/Logic/
    /Library/Application Support/Garageband/
    /Library/Application Support/Garageband Content/ (Legacy)
    /Library/Application Support/Soundtrack Pro/
    /Library/Application Support/WaveBurner/
    Impulse Responses
    /Library/Audio/Impulse Responses/
    Receipts
    Receipts can vary quite a bit depending on your system. Try to find all those that look like the following:
    /Library/Receipts/AudioContentforSoundtrackProXX.pkg
    /Library/Receipts/CompressorXX.pkg
    /Library/Receipts/EXS24SamplerLibrarySamples.pkg
    /Library/Receipts/EXS24SamplerLibraryStudio.pkg
    /Library/Receipts/GarageBandXX.pkg
    /Library/Receipts/ImpulseData.pkg
    /Library/Receipts/ImpulseResponseUtility.pkg
    /Library/Receipts/JamPackXX.pkg
    /Library/Receipts/LogicXX.pkg
    /Library/Receipts/MainStageXX.pkg
    /Library/Receipts/RemixToolsXX.pkg
    /Library/Receipts/RhythmSectionXX.pkg
    /Library/Receipts/SharedLogicStudioHelpFiles.pkg
    /Library/Receipts/SoundtrackProXX.pkg
    /Library/Receipts/UltrabeatXX.pkg
    /Library/Receipts/WaveburnerXX.pkg
    User Preferences:
    ~/Library/Preferences/com.apple.logic.pro.plist
    ~/Library/Preferences/com.apple.logic.pro.cs
    ~/Library/Preferences/Logic/ (Legacy preferences)
    License
    /Library/Application Support/ProApps/Logic Studio System ID
    Apple Loops
    /Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand/
    /Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
    /Library/Audio/Apple Loops/Apple/iLife Sound Effects/
    /Library/Audio/Apple Loops/Apple/Jam Pack 1/
    /Library/Audio/Apple Loops/Apple/Jam Pack Remix Tools/
    /Library/Audio/Apple Loops/Apple/Jam Pack Rhythm Section/
    /Library/Audio/Apple Loops/Apple/Jam Pack Symphony Orchestra/
    /Library/Audio/Apple Loops/Apple/Jam Pack World Music/
    /Library/Audio/Apple Loops Index/
    Any help would be GREATLY appreciated as this is frustrating the **** out of me. Why can't the apple installer automatically delete the files following an incomplete installation? It's times like these that I wish I was on a PC.
    Thanks a lot!
    I'm running on a Macbook Pro mid 2012 with the latest version of Mountain Lion.

    Took me a while but I figured it out. Sorry for being so aggressive it hasn't been the best day.
    Cheers!

Maybe you are looking for