Logic Not Reading/Writing Midi Information Correctly

I am new to Logic and to the world of midi in general -- so please go easy on me. Here is the problem I am having:
I am using an M-Audio Keystation 88 Pro with a Roland EV-5 Expression pedal plugged into the volume control. When I play software based instruments with this set up (such as Garritan's Solo Cello) everything sounds fine. But, when I record the performance in Logic 8 and play it back, it appears that Logic 8 is playing back incorrect Midi info. For instance, if I do a crescendo from 0 to 127 using the expression pedal and record it, Logic plays it back in a way that sounds like it starts out at around 127 and then drops to a lower number and kind of "flutters" back up into the crescendo.
I am not sure what is causing this and any help would be appreciated.

Open the Midi event editor and check the recorded controller events. Probably the EV-5 is transmitting wrong data to the physical Input of Logic.

Similar Messages

  • " DVD RW Drive " is not reading / writing DVD. It can read only CD.

    HP Pavilion dv6-3140se Entertainment Notebook PC 
    {Personal Information Removed}
    Product Number:   XS065EA 
    " DVD RW Drive "  is not reading / writing DVD.  
    The same DVD can be read on my frnds laptop. 
    Corresponding drivers r up to date.. I even tried uninstall and then restart and then let my laptop install the required driver automatically. I've tried everything I could find on some forums.
    I was told to delete " Upper & Lower filters ". I didnt find Lower filter so I had to delete only "Upper Filter".
    Plz assist me..
    I will be waiting for ur kind reply.
    Thank u so much.

    The upper and lower filter thing only applies if the drive is not showing up at all in the Device Manager. If it appears as a drive and will perform any function at all, then it is likely a hardware issue. One way you can be sure is to try to boot from a bootable DVD such as a Windows 7 install Disk. If the computer will not boot from such a disk then it is apparent the hardware is defective, not the Windows software because the problem exists even before Windows loads.
    The drive has multiple lasers and it is possible for one to go out but not the others.  The drive is easily replaced. See below:
    This eBay seller ships worldwide. You would have to transplant your plastic drive face but that is very easy to do:
    http://www.ebay.com/itm/HP-Pavilion-DV6-3000-DVD-RW-DVD-RW-Multi-Burner-Drive-TS-L633-603677-001-B-/...

  • Id2 tag not read by Music app correctly

    Dear users,
    I have a couple of tracks, for which the id2 tags are not read properly. I made sure
    - I deleted the id1 tags and use only id2 tags.
    - I checked with other Windows SW (MediaMonkey, VLC player) for tags. All are the same and correct.
    This is, what I see in VLC:
    This is, what I see on my Z10.2.2.:
    I'm awaiting  the following on two lines, an the song should be listed under the Album name (Supernature):
    Ohh la la [live]
    Goldfrapp
    How can I upload a file, so others could check for id2 tags with other BB player, please?
    Cheers,

    I'll try that !
    What bugs me is that all the various tagging programs I have tried tell me the tag are in id3v2.3...
    Anyway, I'll install iTunes again and keep you updated.
    Cheers !
    edit :
    Good call ! Thanks a lot !
    Now... When once the tags are converted, I have to move the folder containing the updated mp3s to another folder than "My music" and then move in back in so that the media sniffer, being acti've, removes the album and then re-reads the whole correctly and shows up the track numbers in my library.
    I thought the "update" option in Mediasource ("Actualiser" in my French version -mais oui !- in the menu that pops up when you right click on a track in the library window) would do the trick, apparently I'm wrong, since nothing happens tag-wise when I do it :|.
    I thought I'd just convert everything through iTunes, delete the whole library in Mediasource and create whole a new one, but if I don't ask, I'll never know : is there a way to have the Mediasniffer read the tags again ? Message Edited by Umbrifer on 08-29-2006 0:38 PMMessage Edited by Umbrifer on 08-29-2006 0:50 PM

  • Firefox on 2 independant laptops, not reading website source code correctly, when all correct on Chrome and IE.

    Rebuilt my website in Serif WebPlus X6.<br />
    Using Google Chrome or Internet Explorer the site is displayed correctly as is the source code.<br />
    In Firefox 18.0.1 Code is being read wrongly. Cleared Cache and fault still there. Checked in Wifes laptop – still the same fault on her Firefox and okay on Chrome and IE.<br />
    Code should read - span class="Body-C-C9">“Why won’t the doctors listen”?<pre><nowiki></span></p>
    But firefox is showing - span class="Body-C-C9">“Why won’t the doctors listen”?</span></p></nowiki></pre>
    There are further similar faults throughout the website.<br />
    Why is Firefox not reading the code correctly?<br />
    Please help.

    That is an encoding issue.<br />
    It looks that the page is in UTF-8 Unicode and the server sends this page as a Western or Windows encoding.<br />
    So you see the Unicode characters as the individual bytes that they consist of.
    You can inspect this in Tools > Page Info > General and you can also use the Web Console (Web Developer > Web Console;Ctrl+Shift+K) to check the response header.<br />
    If the server sends a content type via the HTTP response headers then Firefox doesn't honor a meta tag in the file or otherwise switch the encoding.
    *https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types

  • Logic Not Reading Kontakt 3 correctly

    I think this is a leopard problem because all works well in... GUI is white like this http://img258.imageshack.us/img258/633/picture1ixy.png I know it's not a NI problem. It works fine on the studio tower but not on this imac... I installed Prokit 5.0. still nothing... even though it affects Kontakt it seems to be something in my 10.5.8 please help. thanks!

    Open the Midi event editor and check the recorded controller events. Probably the EV-5 is transmitting wrong data to the physical Input of Logic.

  • Itunes not reading external hard drive correctly

    I recently moved or at least attempted to move all my music from my old hard drive to an external hard drive.
    My original plan was to have all my music on the external and have Itunes pathed to the external so whenever I have it plugged in, all my music would be in my library.  Obviously it wasn't that easy, at least not in my case.   Throughout the process I ended up losing a decent amount of my music which ***** but what can I do now.   My question is, how do I properly have Itunes read my external hard drive and have it show my music?   I have the path set to the folder in which my music is at but the issue seems to be that when I consolidated to transfer into the external, all the songs are in individual folders by artists.  I'm lost and don't know what to do.   If I drag the music folder to Itunes, the music stays on my library whenever the external is plugged in which is what I want.  But, many songs are doubled for some reason.  
    Any help would be appreciated as this is becoming very frustrtating, thank you.

    †ry the refresh script from here http://ottodestruct.com/blog/2005/10/20/itunes-javascripts/

  • Thunderbolt Not reading Battery Correctly

    Hey there!
    I have been searching the net for this particular problem I am having and sofar have found nothing, so I was hoping maybe you guys could help me out.
    My Thunderbolt after fully charging the battery will show at the highest about 60% battery life, if not lower. This morning for example it would only show 29%. I have bought 2 additional extended batteries for the phone, both will show around the same percent when fully charged.
    I have tried doing the whole battery calibration "thing", with no success whatsoever. One time, after my phone died; I took the battery out of my phone and put it in my friends phone and it showed 82% remaining, yet my phone would say 0% and die. I have done multiple Factory Resets as well.
    I've heard of a few other people having this problem and just warranting back the phone, but thats the problem. My warranty ran out a couple months ago. I had to replace my thunderbolt twice for random annoying issues, and when I got my Third phone (current), the battery wouldnt charge past 80% but i figured the battery was going out and not that big of a deal. The warranty ran out a couple months after I received my current phone so I decided to finally by addition Extended Batteries. And here I am. -_-
    At most the battery will last maybe 3 hours under use, 5-6 with light use. If i leave it in standby, maybe around 8 hours. And this is with the Extended battery!
    When my Phone dies, I am capable of pulling the battery out, waiting a minute, and putting the battery back in and wala! it will have a sudden 2-5% of battery life left again. I can usually do it 4-5 times before it wont work anymore.
    Occasionally the phone will drain fast, get to anywhere from 19-2% and just sit at one specific percent for a few hours.
    I have tried multiple charging cables including: Car Charger, Stock Phone Charger, Offbrand wall charger, and PC-USB charging.
    I am thinking my phone is not reading the battery voltage correctly. When my phone stops charging, or really just sits at a random percent for forever, it shows roughly 3.822V. When the battery is "dead" according to my phone, it shows around 3.6 - 3.5V. I'm not completely sure if that is normal, or even relevant.
    Any help would be most appreciated, thank you! And I apologize for the long post.

    PC Charging is the Worst What i would Recommend is a H.T.C charger And buy a  H.T.C  O.E.M Battery a Extended Type if Possible.
    These two Items at Android Central Cost about what the The Battery it Self cost. Just a Few Months Back Please give these a Look i don't think you will be disappointed.  The Battery Cost $34.99  the Charger $14.95  plus a little for S&H.. b33

  • Aperture Vault Does Not Read Drive Space Correctly

    Aperture 3 Vault does not read the disk space correctly on my newly formatted LaCie 500GB drive, and produces an error message that says there is not enough space to update the vault.
    Finder and Disk Utility both indicate that the drive is completely empty. Any help in resolving this problem will be appreciated.

    Just some thoughts
    1. Check ownership on the drive, everyone can read and write. (& it is MacOS formatted)
    2. Check the permissions in your library, it is possible that there is a file with a permissions conflict (only attributable to the fact that computers are programmed by human)
    http://support.apple.com/kb/HT3805
    Tony

  • ITunes on new computer not reading MP3 tags

    I have transferred my library of MP3 that were ripped from CD from my old computer to my new computer, and many of the files do not show the album name or artwork, etc. in iTunes.  If I look at file properties in Windows, however, all the information is present for the MP3 - album, artist, etc.  I have found that there is a field called "Encoded by" and is says "iTunes 11.0.2.26", or some other is an older version of iTunes.  If this iTunes version is older than the latest version of iTunes on my new computer, then iTunes does not read the MP3 tags correctly.  If I manually change that iTunes version in Windows to the latest iTunes, then that file is fixed!!!
    My question is, what is the fastest way to make this change for all the files that are showing old info in the "encoded by" field?  The files are all buried in various artis->album folders in the music folder, and I can't see any way to change this field from iTunes, I can only do it from windows explorer.  If I could do it in iTunes it would be fast because I could group all the bad files together, select them all, and change them in one step. 
    Please help!  I am close to fixing it!

    Are you using the latest downloaded version of iTunes from Apple.com, instead of a version that came on disc with the iPod? According to this article, Windows Vista 64-bit required iTunes 7.6 or later
    http://support.apple.com/kb/HT1426
    Also, make sure you got the version of iTunes 8 for Windows Vista 64-bit
    http://support.apple.com/downloads/iTunes8_0_2_for_Windows_Vista_64bit

  • IPhoto 09 not reading Nikon raw files (.nef) properly?

    Hey everyone. Over the weekend I upgraded from Leopard to Snow Leopard. Everything seemed to be working correctly until I started using iPhoto. Since the upgrade, I've noticed that photos that I imported from a Nikon D700 seem to look pixelated. I took it to a Genius Bar and the dude helping me was at a loss. He said to try and re-install Snow Leopard, which I did, and that didn't help. I went back and he upgraded me to iPhoto 09...also didn't help. He said he thinks that maybe it's Snow Leopard/iPhoto bug. He said that it's not reading the raw files correctly and seeing them as thumbnails. We looked at the photo info of a random photo, and even though it was a large 10MB file (indicative of raw format) its pixels were 160x160. Weird. Also of note, both Photoshop and Lightroom view and display all photos correctly.
    If anyone has any suggestions or solutions on how to fix this it'd be much appreciated!!

    Welcome to the Apple Discussions.
    We looked at the photo info of a random photo, and even though it was a large 10MB file (indicative of raw format) its pixels were 160x160.
    That means that what you're seeing is the jpeg Preview inside the NEF and not the actual file.
    My guess is that the your Camera Raw bundle is damaged.
    Go to
    HD / System / Library / Core Services / RawCamera.bundle
    What version of this do you have?
    Regards
    TD

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

  • UCCX 8.5 not reading prompts correctly

    Well this is something deep diving in uccx scripting and prompt reading...anyway I have following setup:
    - UCCX 8.5 - migrated to this version from version 5.
    In script which we are using there are steps where customer puts some digits (account number for example) - we collect that digits and send them to main server - that server responds with raw message where is information about account (money status, date of last payment, approvable minus on account and date until it's active etc.).
    That same script works without problem under CCX 5 and Windows environment - in CCX 8 it works but sometimes, and really sometimes, it doesn't give all prompts as it should. For example - it gives you money status, payment date and then, when it's supposed to continue and read all other information, it just stops and goes to next step in main script! Sametime other accounts works just fine and all info are given - that is we have problem with some particular account not the whole of them!
    Also when I did debuging I can clearly see that main server is sending all required info and that script is correctly writing that info into adequate variables ready to be readed - but as i said when we came to reading sometimes we have mentioned errors.
    We manage to solve this temporarily with simple solution - we are inserting blank prompt (1s or 0.5s timed) before actual variable...and this is the weirdest thing - it plays correctly after that!
    So based on this what I wrote:
    DOES SOMEONE HAVE SOME KIND OF EXPERIENCE WHY IS THIS HAPPENING IN CCX 8 AFTER MIGRATION? WHAT IS CAUSING THAT PROMPTS DOESN'T BE PLAYED AS IT SHOULD? AND WHY INSERTING BLANK TIMEOUT BEFORE ACTUAL READING OF PROMPT VARIABLE IS SOLVING THE PROBLEM?
    Are there some kind of buffers which needs to be modified or something?
    Hope that you understand this weird problem - and I'm open to discuss this with all of you who are deep in CCX story...
    BR,
    Dragan

    Hi troyputnam,
    It's not necessary a restart. Which folder do you upload the prompt, en_US? If you upload the prompt at a different folder, you will need to specify for every prompt to not look at the default Prompt Folder.
    Regards
    Please rate all useful posts
    Favor calificar todos las respuestas útiles.
    LinkedIn Profile: do.linkedin.com/in/leosalcie
    MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

  • Logic Pro 9 randomly displaces midi information within a region.

    Hey guys, hoping for some help here.
    I have Logic Pro 9 and have been working with it for about two years now. For the past couple of months a really strange thing has been happening with midi information that is displayed in the region boxes. I do not play a midi instrument therefore I program it all in by hand and from time to time when I loop a region during playback the midi notes are transposed up and down at random intervals. The only solution that I have found has been to copy and paste individual regions, then go in and correct all the displaced notes. This is really time consuming. I have tried searching for a solution but this particular problem doesn't seem to pop up anywhere  .
    Has this happened with anyone else? Does anyone have any idea what might be causing this to happen, and if so how can I fix it? Maybe I pressed a button somewhere lol.
    Thanks for listening! 

    Check either your Chord Track or your Transposition track.
    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=4%26sec tion=12%26tasks=true

  • Premiere Pro is not reading all of the video content in my AVCHD clip. I know this because my computer plays all of the content through Preview, so the information is on the card. How do I get Premiere to read all of the content?

    Premiere Pro is not reading all of the video content in my AVCHD clip. I know this because my computer plays all of the content through Preview, so the information is on the card. How do I get Premiere to read all of the content?

    First, AVCHD isn't just "one" clip, it splits the video & audio into several files each per clip, typically with randomly generated names. The only way they "play" correctly is if the software doing so is able to read from the data file ...in a different folder ... the information that X clip is actually A, B, D, #@, and 456 video clips and TR, #r54, and ert$%4 audio clips. The next "clip" is ... and on and on. So both rapid access to the video files AND that database file are necessary to play the files back, or do anything else with them.
    VLC is a fairly decent but simple playback tool. It's nowhere near as complicated nor demanding in its "relationship" with those clips as an NLE like PrPro, which will be trying to do more reading & writing.
    Further, many of the preferences in PrPro are natively set so that it writes project, cache, preview, & database files next to the footage. So ... if it doesn't have both a fast enough connection with the data AND space for putting all of it's own stuff there, it tells you it can't work the file.
    Therefore ... the need to have the complete data from the card in the exact same folder structure it was in ON the card copied to a "local" hard drive.
    Neil

  • MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

    MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

    Hi David.  I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help.  I often find that my SD card will not load when I first insert it.  I have to remove it and then put it into the slot again firmly.
    You also haven't posted any information about the SD card.  What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)?  This sort of information will help to narrow down the problem.
    If you post some more information I'm sure people will try to help you.  In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
    Hope that helps.
    Ivan

Maybe you are looking for