Logic not responding when saving or changing settings & Can't record audio
I have just started to use Logic for the first time (installed it a month ago and now trying to use it).
I have the latest version of Logic, OS X and have a MacBook Pro.
I do not have any external hardware or plug-ins installed.
PROBLEM:
Whenever I try to save or save as a song (even when there is no MIDI or Audio in the tracks) the colored pinwheel spins forever.
I also was trying to figure out how to record audio. I discovered that there was no path for recording audio which might be the problem why I couldn't get it to record (see below), and when I clicked the select path button it also froze on the spinning pinwheel.
Audio Recording Problem:
I set one of the default Audio tracks to Input 1 (built-in microphone) and I see the monitor responding to sounds, but when I turn on the record button on the track and then click record, the mic is still working but nothing is recorded in the track. When I open Garageband and record it works perfectly fine.
Help?
I had many problems with my Mac G5 2.7 refurb/Logic 7.2.1 when I first got it back in March. Although my problems were different than yours some things I remember doing that helped:
Trashing Logic's preferences fixed a situaution where my Logic windows were flashing randomly and Midi info was corrupted causing my Mackie Control Universal and my Korg Triton to freak out Logic.
Repairing disk permissions because 2 times Logic did not totally install correctly. Yes I reinstalled Logic at least 4 times to figure out why I was having freezeups system wide.
Working closely with Apple Care documenting my problems and finally getting my local Apple store in our local Mall to change out the motherboard, dual processors and optical drive. Yes essentially a new computer. Since that time I have not had one system wide freezeup (any wood around here)
or major problem.
AT one point running the "Quick Test" from Apple's startup disc showed a Bad RAM chip. Again not related to you but running the test could show something.
I have 2 issues left to fix - Logic 7.2.1 for me has a transposition problem. Midi tracks will show up after I open a song file transposed down a step. The fix is to reboot Logic which is a pain. 2nd - Annoying beep coming from my power supply. Beep is audible in studio near the tower and is also in the audio chain coming out of speakers. No fix yet but again I'm working with Apple Care.
Similar Messages
-
Adobe Elements 9 not responding when saving changes
Adobe Elements 9 says not responding when I save image changes. I does eventually save the image changes but takes awhile. Is this normal? My computer is rinning Windows 7 and I have 8GB of ram so I don't think that ram memory is the problem. Thanks
In other versions of photoshop elements, you don't get the not responding
thing at the top of the screen when saving png files, but it still takes a noticeable
amount of time to save png's in other versions of photoshop elements and the full
photoshop version.
I haven't been able to find it yet, but there is a post somewhere in the photoshop forums
where an adobe photoshop engineer explained why png's take longer to save than most
other file formats, but ssprengel said something about the compression of png's which
sounds like the gist of the post.
There have been more than a few complaints about the not responding messages in pse 9
on windows machines for various operations, but as far as saving images, the not responding
message doesn't seem to hinder saving files, but it is very annoying.
You might try posting here where several adobe employees answer questions:
http://feedback.photoshop.com/photoshop_family/topics
MTSTUNER -
Dreamweaver cs 5.5 not responding when saving file!!!
Dear Comunnity,
Kindly help if anyone knows
Reinstalled recently Adobe Dreamweaver CS 5.5 and started having problem.
When i'm working with Dreamweaver and saving file, *.html, *.php, *.css and etc. It just stop responding and i can't do anything, task manager not helping, can't turn off pc, it just shows "shutting down" and ... none, only power button helps me.
It deletes file that i'm tring to save and creates *******.tmp file with code which were inside. And problem that it's happening randomly, once i start and it's not responding in 2 saves, next time it just not responding after whole day of work.
Never had anything like that before.
If anyone knows, looking forward for your support.
Thank you!Try this -
http://forums.adobe.com/thread/494811 -
Not Responding when Saving a PDF
I am trying to combine a large number of pdf files into one large pdf binder. I am able to combine, and search them the file once it is combined, but when i try to save it, i get a "Not Responding" message. Sometimes Adobe stops working and closes and sometimes it just freezes up and i have to end task using task manager. Anyone have any idea of what would cause this and how i can fix it?
ThanksI will move this topic over to the Acrobat forum (this is the Adobe Reader forum).
-
Acrobat not responding when saving
I use Adobe Acrobat X and Windows 7 (incase that makes a difference). Everytime I save it hangs and then it says "not responding" and if I leave it long enough it will recover and save. It happens everytime I save a file, doesn't matter how big or small the file is, or where I get it from, if I download it from the internet or create my own. Does anyone know how to fix this?
You might want to try to empty the TEMP folder to see if that is part of the problem.
-
SJAS not respond when Change port for Derby db
Hi Folks
when I change port from 1527 [because it is used by another protocol] for derby database to 3333 [using derby.drda.portNumber=3333 in /root/.netbeans-derby/derby.property file] I found that SUN APPLICATION server is not responding properly.
NOT responding properly means:
1. I can start it from command line but can't start from Netbeans(exceptions of derby etc)
2. I can not see any page o/p in browser for admin and webserver8080 but ports are used by SUNApplication server (confirm by port scanning)
anyone faced same problem please tell us possible reasonsHi,
I did the same thing as you have done - changed the port number to 3333, without making any changes manually to the port values for derby in netbeans. After this i started the appserver from netbeans and i was not only able to start derby (in port 3333) but also the application server successfully. I did not get any exceptions whatsoever.
Just curious, which version of app server are you using? Also, did you verify the settings for the application server that you are starting (using netbeans) under Tools->ServerManager ?
I tried this with 9.1UR1 b01. To add to this, i was able to access the admin console and also the 8080 port.
Edited by: mchondria on Oct 9, 2007 5:22 PM
Edited by: mchondria on Oct 9, 2007 5:23 PM -
Windows 10 - Skype not respond when I change language with Grave accent
Windows 10 - Skype not respond when I change language with Grave accent
Switching languages quickly in Windows 10 with the current version of Skype is a known issue. Hopefully a future update will address the problem.
-
I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals -
After effects cs 5.5 not responding when I open up a project file
I was recently working on an intro for a youtube channel and my project had been running smoothly the night before. But now all of a sudden I open it up today and it starts not responding when I try and open the file. It is running on a mac with 8 GB of memory and a 2.1 GHz intel i7 processor, I have no idea what's happening and I really need help. Thank you for your time.
I can understand that my info was vague, but I am as well a novice in after effects. I have a good bit of experience with it, but not a professional standard. I have 1 video file of average length, a photoshop file, and a word layer, no other effects really. My comp size is 1280 by 720, and I don't know what other info I could give. My other projects run fine, it seems to just be this one now that you mention it. Should I try starting a new project and just working off of that? I can understand that you need to know a lot more, but I was also just asking a general question because I felt that it might be common issue of a setting that I may have had to change, so I'm sorry my info was so vague, but that was my reasoning. I don't believe that saving and backups are my problem, but if you believe it's a means to the solution then by all means please justify that. Thank your for your time and help.
Trey -
hello
The problem appeared two days ago is that I can't open my mail app. everything was fine and functional. Now I double click on the icon and it does not respond. it receives mail and I can see push notifications on the mail icon but when I try to open it is no use. OS Y 10.10.2 (14C1514)Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Restart the computer. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. Any custom stationery that you created may be lost. Ask for instructions if you want to preserve that data. You can then delete the folder you moved and close the Finder window.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Looking for help.... I keep getting a pop-up message on my phone stating that my server is not responding and to check my settings. My settings are fine. Any advice on what I can do to receive new emails on my phone? Help!
For a few weeks I have been using the GMail app on my iPhone 4S to get mail without problem. When I wanted to check something in Apple's Mail app, which has worked well for years, I now get a message for my principal email address that the server is "not responding," even though the same server is responding to my GMail app. For some reason, when I dismissed the message in Mail, it popped up again, but then could be dismissed. Did something change in Mail that requires some imap addresses be deleted and readded? Any idea?
I would not want to think that Mail is programmed to befuddle if it is ignored too long. -
Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.
Hi cruzsanta03,
Can you please let us know the following:
- Operating System;
- Complete version of Acrobat installed;
- Experiencing this issue with a particular file or all PDF files;
- Experiencing this issue while performing a particular task or with any task;
- Files are saved on the local machine or on a share drive;
- Launch Acrobat in Safe Mode and then check the issue. Hold 'Shift' key and launch Acrobat, and then check the issue. -
With ios 8.3 ipad mini apps sometimes do not respond when touched
a new problem occurred with ios 8.3 ipad mini applications sometimes do not respond when touched Fix it in ios 8.4
If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
JTextField not responding when app jar'd
I have a few JTextFields on a JWindow which was working when I was designing the app. I was using VAJ3.5. Once I jar'd with jdk1.3.1 the first textfield would respond when I "java -jar My.jar" and the 2nd would only gain focus when i would click to another program and I would come back to the jar. And if I double clicked then both texts would not respond. I then changed to a JDialog, and everything works fine now.
I would rather use JWindow but im at a loss to explain why this would happen. Can anyone shed some light?
Thank you for your timeTry this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion, Mountain Lion and Mavericks the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
It the above doesn't help Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try iDVD there. Then reboot normally and try again. -
Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (
- Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
Next:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Maybe you are looking for
-
Camera connection kit - SD or USB?
Hi, I received my CCK today. I have a Canon camera that uses an SD card. It also has an USB cable. Which CC is best to use, or doesn't it make any difference? Thanks.
-
Dear Guru, In Service PO, for one service the net price is 0.00 in item overview. for that service have 4 service numbers, its like.. DG INSTALLATION CHRGS 3 100.00 AC INSTALLATION CHRGS
-
TS3999 I cannot sync Microsoft Outlook calendar to my iPhone.
I am trying to sync my MS Outlook calendar to my iPhone, but with no success. I've installed the iCloud, and i was able to sync an iCloud calendar to MS Outlook, but not the other way. I'm running MS Outlook on Win 7, and iPhone 5.
-
HT1689 why can't i log onto my itunes accound?
Why can't I log onto my ITunes account for my Ipad?
-
What is LRS, and how do I change it to MPEG?
When I tried moving my library between computers, I went through the whole consolidate library, using the iPod as a hard drive spiel. For some reason, all of my songs became what the computer is calling LRS files, and so iTunes will not play any of t