Logic on Quad (Help)

Hi,
So I bought a new Quad.
Transferred Logic in "target" mode (from MDD to Quad).
Then I downloaded the patch to make it work, but now Logic has only four audio tracks and two outputs (and wont allow me to make more).
I've run the setup assistant. No change.
Has anyone encountered this?
I don't have my old Logic 5 installer (lost it years ago) I only have my upgrades to 6 and 7.
Dual G4 (MDD) / G5 Quad Mac OS X (10.4.5)
Dual G4 (MDD) Mac OS X (10.3.9)

your logic 7 upgrade dvd contains the complete
installer! To me it sounds like u installed a crack
called logic pro but only contains Logic Express.
thats funny, to me even express gives you more than 4 tracks , nice try
hey BigOneHundred, did you do what Justin C said?
stash

Similar Messages

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Wlserver.exe error occur while start the web logic server-please help

hi
Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
Thannks in Advance,
Cheers,
bala...

Could you please mail the errors and the WLS Version and service pack as well.
- Ramkumar

How to code my logic in Search Help Exit

Hi,
I need to add my own Search Help say MATOG in Material MATNR Collective Search Help MAT1-> Collective Search help MAT1_A.
Is it possible?
And , when I need to add my own logic in Search Help exit for my particular Search Help, how should I code?
Thanks,
Shivaa..

Hi,
Go through below link, it gives you step by step approach in implementing search help exit.
https://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits
Regards,
Raghavendra

I just got logic and need help i dont know how to make a track at all

i just got logic and need help i dont know how to make a track at all

Pancenter wrote:
There was a time not too long ago when people respected the incredible amount of talent that contributed to this software...Everyone -wanted- to learn about the craft and "art" that goes into being a good engineer, musician, producer...etc.
Beginner's did enough reading and experimentation to at the very least, ask an intelligent question.
pancenter-
Hey Pancenter there are still lots of us about.
I wouldn't take the original post too seriously - I may of course be naive but it sounds like it could be a troll to me!
I learn a lot from reading the posts of the likes of you, Erik, Bee Jay, sampleconstruct, noeqplease etc so I hope you guys don't become too dispondent when you see posts like these.
By the same token, I hope the Logic team continue to use their talents to develop powerful software that caters for the professional user, while allowing Garageband to continue to do its (excellent) job of providing for its market.

Logic Express Manual Help File?

Exploring Logic E is almost worthless. Why doesn't the search function work with Logic E Manual Help?

I just got off the phone with AplCare. This problem was fixed using the disk utility and "repair permissions" function. For future reference, it was suggested that I should perform this process on a regular basis ("every week or so"). As a PC guy transitioning this was new to me. I think I have my help file functioning properly now.

Can not see wave form in arrange window logic 9 Please help

I have been using Logic for 3 months now...mostly just importing old wave files from past protools sessions. Everything was working fine until I created a new session to record audio. I record the audio at a nice level...I hit playback...I can hear it fine but I can't see the wave forms. I can see it in the sample editor. I've searched around and found the same problem in the past on some forums......they say to trash preferences... I went to my mac drive...library...preferences and nothing I have no files labeled com.apple.logic.pro now I'm lost....the funny thing is... when I zoom in horizontal ...the wave form shows but it makes the track way too large. Any help would be great. Thanks

In Logic: Preferences/Audio
What is the "Recording Delay" parameter set to?
It should be zero, default is zero. If it's set to a positive or negative Logic will often not show the wavforms. If that's it, it's one of the long standing bugs in Logic.

Logic 7 projects crash immediately in Logic 8? Help!

I got a new Mac Pro and Logic 8. Spent three days installing software and plugs ins (****).
MacPro Quad 2.66, OS X 10.4.10, Pro app support downloaded. All UB's downloaded, all plugs validated in AU manager. 1 gig ram, but I'm adding 2 more today.
When I open an old song from Logic 7 (I have 50 songs awaiting vocals and mixing), Logic crashed immediately upon opening, and then a second song crashed upon pressing play (Logic quit, and it and crashed the song too).
Then I wrote this post.
I've heard that it runs Logic 7 songs, "no problem." Any ideas?
MOST appreciated. Thanks!!

I'm also having this issue on a G5 PPC. What's odd is the first project I opened worked fine, but the next two Logic 7 projects I opened either had no audio (with loud clicking), or crashed shortly after trying to play them.
These projects are using TDM tracks and I'm using PT 7.3.1. and three Digi Cards.

Installing Logic 9 UPGRADE Help

Hi,
I've been using logic pro 8 since it came out, (got it part of logic studio) and i just bought the logic studio upgrade today so i can run logic 9, aswell as mainstage etc.
Ever since i put snow leopard on my mac i've had quite a few crashes with logic, when it crashes it gives me the report that it's due to my 'camelPhat plugin' but sometimes it doesn't say it is that.
The guy in the apple shop said i would be best to totally uninstall logic studio 8, then reinstall it, then install my logic studio upgrade, then reinstall my plugins e.g soft synths etc
He said that logic was probably crashing due to some things not being built for snow leopard, like my plugins.
I was just wondering what anyone thought of this? Is it worth while, am i likely to encounter any problems or would i be best just leaving it as it is and installing my logic studio upgrade over the top as it already is?
Thanks for any help or guidance, really appreciated.
Tom

installed logic 9 upgrade next to LP 8 last week. Running on an imac intel 20 inch from 2008.
It's all working like a breeze. Worked on some pretty heavy projects. No crashes or any other problems.
I really really like Logic 9. Flex time and Bounce in place all already worth the update alone, although i think 200 euro's is a bit too expensive, compared to the price of the normal package (i think 400 or 500 euros)
Anyhow, i love this stuff. Soo much more intuitive and quick than Cubase, which I've used for years actually (and which is also a very very good program, but logic just beats it for me)
cheers, SLVR (www.soundclick.com/slvr ; www.soundcloud.com/slvr ; www.myspace.com/slvrcircus )

What drive should i put in my new imac if im running logic x? Help

hey peeps
gonna buy a new imac to run logic X...please help with advice on which drive i should load it with....my cpu is 5 years old and im lost...typicl sesion includes 15 audio track, 3 midi tracks, and 4 software ist. tracks....and lots of plug-ins....not sure about fusion vs. ata. vs flash.... thanks so much in advnce!!!!
grant

kcstudio wrote:
No intention to dispute your advice here Pancenter, but just out of interest, what kind of problems are you referring to?
Thanks in advance!
Since it was a new iMac he was going to purchase, there is the huge iMac/Fusion Drive Thread.
The other thing is... the Fusion drives offer no improvement over standard drives for audio, in fact performance may be less, plus there is an additional software layer installed to mange the Fusion Drive... and to top it off, the the regular spinning disk of the Fusion Drive is only 5400RPM.
Here's the thread.
https://discussions.apple.com/message/23790322#23790322

Basic Mastering in Logic 9 - Need Help!

I am brand new to Logic Pro (and DAW's in general - no other pro audio background). I have completed a musical recording, mixed it to my satisfaction, but I want to master it to get it to sound more loud and full. I have searched the web for help in how to do this, and while I have found some information, I'm a little stuck in terms of how to bounce my tracks into a single (or double) track that can then be mastered and tweaked. I want to convert my song into a format such as is seen in this YouTube video so that I can apply these mastering strategies: http://www.youtube.com/watch?v=4ch9n0uD8gg
Can someone point me to a step by steb resource? I'm stuck, thanks!

Bouncing:
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=29%26se ction=1%26tasks=true
Mastering tips:
http://www.gearslutz.com/board/music-computers/468170-loudness-when-producing-mi xing-tips.html
http://www.logicprohelp.com/forum/viewtopic.php?p=282853#p282853
http://tarekith.com/assets/mastering.html

Dataguard - logical standby - need help - not updating data at commit

Hi
Need help ?
We have logical standby setup where data is not updated at standby when committed at Primary. It only updates when alter system swith logfile.
On Primary:
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(online_logfiles,primary_role) db_unique_name=xxStandby'
On Standby:
we have already created standby redo logs ( 1+ # redo logs)
we used ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE NODELAY;
The data only ships when we do the ALTER SYSTEM SWITCH LOGFILE whereas it should so when data is commited on the primary.
Is there anything we are missing or need attention.
Please help
Thanks you so much

Yes, I have standby redo logs = ( 1 + # redo logs on the primary) and are of same size.
I also changed the log_archive_dest_2 setting for valid_for to ALL_LOGFILES, but the performance is still very slow... we are now overr 9 hrs behind the primary.
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(ALL_LOGFILES,primary_role) db_unique_name=xxStandby'
The Logical standby performance reallly not good at all. trying to increase sga/pga more ... hoping this will speed up some
Paul

Can't open Logic. Please help.

My Macbook crashed about a week ago. I took it to an Apple repair centre to have it fixed. Before I did that, I backed up my HD using Target Disk Mode with my other mac as the host. Now my MacBook is fixed, and I restored the system (using Target Disk Mode again, erase what was on the hard drive on the MacBook, then I copied everything on my backup drive onto the MacBook hard drive. But it couldn't start up, so I reinstalled Leopard using the option which keeps the previous files).
Now my problem is, although it looks like the system is my old system, when I open Logic Pro 8, it asks me to input the serial number again. Also, my QuickTime Pro now becomes the rubbish QuickTime Player. The thing is I can't find the serial number for Logic Studio 8, nor the installation disks. They are in my other home, which I won't go back for another 3 months. So my question is: is there any way I can get a new serial number from Apple, or any other way that lets me use Logic again?

I would call Apple, explain the situation and see if they can help you. Maybe also bring it back to the service center and walk them through your steps to restore your disk, etc.
Good luck!

Having trouble with condenser microphone and Logic Pro. please help

I purchased a condenser microphone that runs only with phantom power. I have an XLR cable from the mic into the phantom power interface and have an XLR to USB plugged into my computer, when i go to logic audio preferences it doesnt show that the microphone is even connected (ive checked input and output). Ive even tried it on other programs and i still get nothing. Please Help.

I have an XLR cable from the mic into the phantom power interface
What phantom interface is this, make and model.
XLR to USB plugged into my computer
What is this? Just a cable?
What microphone is it?
Trying to get an idea of your signal chain as, in your original post, your signal chain makes little sense. Do you have an audio interface or is that the phantom power interface you are referring to? A microphone isn't an interface and a mic, in itself, won't show up in Logic prefs (unless it was a USB mic, which it is not).

Problem on logic need ur help so bad

hi im kindda new to logic and i hope my english's fine ... i got logic on my macbook pro for like only 2 weeks
im runnin it in some big show based on the logic project , every time i tried it in home nothing bad happend but when i get to large stages with bass vibrations after 2 or 3 songs i get "disk too slow" problem and after clickin 3-4 times "continue" logic seems to be ok .
i found this thread
https://discussions.apple.com/thread/2609440?start=0&tstart=0
and still got no answer and i relly gotta solve this problem .
shud i buy an external drive ? shud i try isolating my mac by cases , foams and stuff ?
what do i do ?
thanks

well if u wanna know , after i got no replys i found a thread talkin about disabling the "sms" thing on mac ,
it workd like a magic just got back from 2 gigs in one night logic was workin perfect , this "disk too slow" error is gone and i can run multitrack and record in any enviroment . hope this help's other people in the future coz this problem was a real pain in the *** .

Logic on Quad (Help)

Similar Messages

Maybe you are looking for