Logic preference are not loading completely so my audio has stopped workin

when i boot up logic it says "Error reading /writing file "com.apple.logic.pro.cs" logical end of file reached during read operation."
So my logic is totally dead no audio or instruments work - how do i sort this out???

Try moving the file to your desktop and restarting Logic.
It's in
~/Library/Preferences/Logic/

Similar Messages

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

All of sudden, images are not loading completely

It makes no diff if I upload it directly or as a dependent file, all images are only uploading about 20%, then there is a big grey area. I have DW5.5. The pages upload, but the images are not. This is across two web hosts, 3 web sites at least. Help please Here is one of the sites Trip Reports for St. Lucie Audubon Society

chatting with AVG tech now.
She said they have a patch and to do a repair install.... try it and see if that helps. I'm going to try now.
To repair your AVG please follow these instructions:
Go to Start -> Control Panel.
Note: Click Settings first if Control Panel is not available in the Start menu.
Open (Programs) -> Programs and Features, or Add or Remove Programs.
Select AVG in the list of programs.
Click the Change or Change/Remove button.
Select Repair.
Follow the instructions on your screen to complete the installation.
Restart your computer.

My images are not loading past 50%! it has done previously ... however for some reason not now

every time i try and load an image from my desktop of the web the form will not load anything past 50%
i have also tried over the past few days to get onto this forum - with no luck... hopefully this works and someone will help me out!

Are you still experiencing problems logging into your form? If so can you post a link to the form so we can take a look at what is going on?
Andrew

Muse pages are not loading completely in browser. Forced to reload page to load.

I have a several websites that I am working on that when I publish to a production server, the HTML is not completely rendering in the browser.
After reloading all the elements display correctly.
Any suggestions??

Please see http://muse.adobe.com/exchange-library/chrome-33-webfont-workaround-1
Also note that once Chrome fixes the issue you'll want to remove the suggested workaround and re-publish the site.

Preferences are not saved properly

A while back, I was doing something "complicated", with several programs open at the same time, and GarageBand crashed. Nothing unusual.
But since then, every time I open GB, two error messages come up: The first one says: "Error reading/writing file "com.apple.garageband.cs":" and lets you click "cancel". The second one says: "The preferences are not loaded completely. Do not save them, as you would overwrite the Preferences file with incomplete data." and lets you click "OK".
Then, when I want to quit GB, it doesn't simply shut down like usual, or that is to say, it shuts down, but then the message that says that the program has unexpectedly quit and do you want to send an error repport comes up. But then GB apparently still hasn't shut down entirely, and I have to force quit it in order to quit it completely. Because, I suppose, the program is trying to save the Preferences file, in vain, because something (but what?) is prohibiting it from doing so.
I don't really know what all this means. As far as I can see I haven't actually lost any work because of this yet (but then I haven't searched that deeply), but I would sure like to make sure that doesn't happen.
Does anybody have any clue what's wrong here and what I can do to fix it?
All the best
Martin
iBook G4 Mac OS X (10.3.9)

Hey Willy,
Sorry, that was the first thing that came to my mind.
Maybe if you restart and login to that account try those settings you want to do and restart again to see if that works ( it's what i do when i use windows ).
Might or might not work. Just a thought.
cheers..

The App store tells me "all downloads are complete", however, the downloads are not loading and i still have the message "waiting" with no ability to complete the installations.

The App store tells me the downloads are complete, however, the føur items still show up on the Purchases page with the message "waiting" and are not loaded into the computer. I cannot even highlight the apps, nothing works.

Try disabling anti virus software and turn off the Firewall in System Preferences > Security & Privacy.
FYI... third party download managers will not work with the App Store.
From the App Store menu bar click Store > Check for Unfinished Downloads

Mafia Wars can not load completely because you are missing a plugin, pop up is too small to see the missing pluging, how do I find out what it is?

Yesterday, while playing Mafia Wars, I kept getting a bar notification that "The game can not load completely because you are missing a plugin? When I clicked on the box I got an 1/2" popup, which probably contains the information I need but it is too small to find out what it is. You can not maximize it. The is nothing visible to click on. Flash and Java are all up to date, as well as all other plugins. No plugins are disabled. How can I find what I am missing?

Try a program such as Disk Inventory X or OmniDiskSweeper.
(50778)

Pages not loading completely or at all.

This is a problem I've been having for weeks and weeks. Pages in Safari (or in IE or in Firefox) will not load completely or at all. For example, the apple.com homepage does not load at all and neither does ebay. However, the amazon homepage will load almost completely, but a few of the images don't appear.
I've tried numerous ideas.
I've run through the power cycle. (Turning my router and cable modem off, and then restarting them.)
I've run network diagnotics.
I've reset Safari.
I've typed in IP addresses manually.
We bought a new router.
It even got down to me having to reinstall the operating system. (The computer is fairly new, so there wasn't any important information on it.)
I tried calling my ISP, but they don't know what's wrong.
Apple won't speak to me because my 90 days is up, and my parents won't pay $160 for the care plan.
I'm becoming desperate at this point. I love my new iMac, but there isn't much I can do without the web.
Oh, I also can't download updates, access the iTunes music store, or anything else that requires internet acces.
We have three windows computers in the house that are all running fine on the WLAN.
Any help would be GREATLY appreciated.

Any other ideas?
Hmm, can you try logging into another user account to see if the problem is present there as well? This will confirm where the root issue is - your user area or system wide. It sounds like it wil be system wide but best to double check.
If you don't have another account you can use System Preferences -> Accounts -> [+] to create a test one (and [-] to remove it if needed).
I've typed in IP addresses manually.
Can you expand on what you mean by that? Are you referring to the DNS addresses or typing the IP address in the browsers address entry box?

Comcast will not load completely

I need more help about making comcast work. I have read almost all the questions and responses to the comcast website will not load completely. It will go as far as log-in/password site but will not load the message page.
Interestingly, I have a mac at home at work. I have the problem at work but my Mac at home is working perfectly.
I have tried to use every suggestion possible and no resolution.

Hi,
Are you using DNS #S in the TCP/IP tab DNS Servers field, in Network?
below #'s from the portforward page- http://www.portforward.com/networking/dns.htm
Comcast (pick the nearest!)
68.87.66.196 Comcast (national) Primary DNS Server.
68.87.64.196 Comcast Secondary DNS Server.
68.57.32.5 (Virginia)
68.57.32.6 (Virginia)
216.148.227.68 (Denver, Colorado)
204.127.202.4 (Denver, Colorado)
68.42.244.5 (Taylor, Michigan)
68.42.244.6 (Taylor, Michigan)
68.62.160.5 (Huntsville, Alabama)
68.62.160.6 (Huntsville, Alabama)
68.87.96.3 (Pennsylvania)
68.87.96.4 (Pennsylvania)
Have you tried deleting all comcast cookies?
Under Safari menu, Safari Preferences->Security tab...?
Alternately....
Home~/Library/Cookies folder/cookies.plistmove the cookies.plist to the trash
Click on the Finder's Icon in the Dock.
In The Finders window, sidebar, click on the Home icon
(if Finder prefs. are not set to open home)
Home~/Library/Caches folder/Safari cachemove the safari cache folder to the trash.
Do a restart of your mac.
Does that help any?
Eme'~[)

When i open my email it does not load completely

when i open smartzone email in mazilla i do not get a complete download. the items ate there but you cannot see them
== This happened ==
Every time Firefox opened
== after it was updated

Hi eaglerabbit,
This is a pretty easy fix. Just go to ''Tools > Options > General'' and change the preference for what Firefox should do on startup. You probably have it set to load tabs and pages from your previous session.
If that doesn't work, you should look at the Knowledge Base article [[Preferences are not saved]].
Hopefully this helps!

The Firewire drivers are not loaded

Hi,
The title of this post says it all.
When using system profiler I get the message " The Firewire drivers are not loaded " in red letters.
The Mac is a 2Ghz intel. So far I have...
1. Done all the usual maintenance. Erased the internal drive and re-installed the operating system. Re-set the PRAM. Re-erased and re-installed the operating system.
2. Discovered that the disks that came with the machine ( purchased brand new from Apple ) will not allow me to complete a hardware test - It hangs.
3. Wondered about being in the wrong job!
This all points, to me at least, to a faulty logic board. If it points some one else in a different direction I would love to hear about it
Regards
Ian

Hi Ian
You might try resetting your FireWire ports, scroll down to the section: +If the issue persists, try these steps:+ in the following article:
http://support.apple.com/kb/HT1317?viewlocale=en_US
Not sure why the Hardware Test would hang, maybe give it a try again:
http://support.apple.com/kb/HT1509
Dennis

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Pages not loading completely

I am seeing intermittent issues with web pages not loading completely, or taking a long time to load. Some times embedded images will not load. The page will often load, but the page loading icon in chrome will carry on spinning.
This is happening periodically and at various times of the day, but has been going on for a couple of weeks. The rest of the time, my broadband speeds are fine and very snappy, as normal.
I've restarted my router (homehub 3) several times.
This doesn't seem to be a general speed problem.
Using speedtest.net, i can see that my download speed is pretty consistent at just under 20mbps.
Using pingtest.net i see no packet loss, with good ping times.
Using the BT speedtest tool, my line speed to the house is around 23mbps, and my download speed is again around 20mbps.
This is effecting all devices attached to the router, both wired and wifi... both windows PC/laptops and ipad/iphone devices.
I am not sure where to look next, and am kind of dreading a conversation with BT helpdesk.
Any ideas?

Thanks... That's a long thread, and I am not going to pretend to understand all of it.
It seems to be similar issue, but I am seeing this any webiste, including this one, not just on a handful of specific sites.
If I understand the thread above correctly, that issue is with BT, and was apparantly fixed, although the most recent post suggests it has not been. And that if this is the same problem, I can't do anything to fix this myself, other than raise this BT?
Having played around a little more, I think I can see that this problem becomes more accute when i am jumping rapidly from one webpage to another in quick succession, until i get to the point where pages are just not loading anymore.

Windows 7 and updated firefox window do not load completely . the banner may load or it times out. If I leave it sit for a while it may finish loading. New computer.. cannot figure it out.

I have a new computer with windows 7. I downloaded the mozilla and the update.. now my pages do NOT load completely. the page banner but not the content. or it takes a really long time. When it will not load it say the try again.. and i reload a number of times to get it to load... HELP ME!!
I will include an example below... in the URL blank.
This includes Yahoo and Google...
occasionally it says ...
The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Logic preference are not loading completely so my audio has stopped workin

Similar Messages

Maybe you are looking for