Logic Pro 7 & Reason 3.0 - Cycle Mode Sync

Hi Forum,
I am using Logic Pro 7 and reason 3.0 simultaniously via rewire. I am having a problem when playing back a song in cycle mode.
I select a section (let's say bars 1 - 8) to loop in cycle mode, but when I play the selected section it does not loop smoothly. When the SPL reaches the end of the cycle selection point (end of bar 8) and proceeds to start at bar 1 again, I hear a skip in the audio. It does not loop perfectly like I want it to.
Can someone please suggest why this is occuring and how I could correct this problem so that it loops smoothly and perfectly?
Thank you.

here ya go
http://docs.info.apple.com/article.html?artnum=300040

Similar Messages

What is the difference when bouncing a Logic Pro X project to Stereo Mode and Normal Mode?

I was was working on a Logic Pro X Project which I am using as a Sequence for a band. When I completed my project, I mixed for left side to hear the Click track and I panned everything else to the right side. After I completed my project, I bounced to Mp3 in Normal Stereo Mode and after opening in iTunes I discovered that I am hearing the click on the right track. I again bounced and tried the Joint Stereo Mode thinking that would fix it but I still get the click track on both left and right. What is the difference between bouncing to Normal and Joint Stereo.
My goal is to produce a 2 track Mp3 Sequence so that all my click track is only heard on the left side and the produced audio is heard only on the right side.
Any suggestions?

FIrst, try to bounce to uncompressed aiff or wave and see if you get perfectL-R separation.
The compression algorithm does its voodoo and maybe some of the left right separation gets messed up with it.
About Joint Stereo.
The idea behind is to save data. The algorithm analyzes the stereo signal, when it sees signals/frequencies that are in the left and right channel, then it says, "having the same signal on the left and right channel is the same as storing only one channel (mono ), and when played back send that one channel to the left and right speaker. it saves you half the storage/transmission". However, you have to trust the voodoo again to think that if what comes out is the same as what went in.
If size and transmission speed isn't an issues, don't use Joint Stereo.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Logic Pro 9.1 32 bit mode

Hi everyone,
I have recently updated to a new Mac OS X 10.6.2 and Logic Pro 9.1. I use M-Audio ProjectMix 1/0 Firewire Audio Interface. I have set Logic in 32 bit mode from get info. And in preferences > audio it is ticked in 24 bit for recording. Does this mean that audio recorded is in 24 bit? Do I un-tick it to record in 32 bit or does it automatically record in 32 bit? I am a little confused.
Thanks,
Peacheach

It records in 24-bit with the check box enabled - this is more than enough for recording and exceeds the dynamic range of convertors.
16-bit when unchecked.
Do not confuse how an application is compiled (32-bit or 64-bit) with how audio is recorded or processed - they are completely different things.

DAW (Logic Pro, Reason etc) distorting iTunes, Safari etc

This is a problem that seems to be related to the control of the audio clock/sample rate within core audio. Here's the scenario:
I have a DAW (I get the same problem whether the DAW is the latest version of Logic Pro, or Reason, so I'm therefore confident it's not just a Logic Pro problem) running. There isn't a difference whether there's a project/file open within the DAW or not. Simply by having a DAW running when I try to play audio from iTunes, or Spotify, or Soundcloud or any internet based audio such as YouTube it's distorted. It kind of sounds like the audio is being run through a mild to medium strength Bit Crusher.
Only if I quit the DAW can I listen to audio from any other program without the distortion.
Has anyone else experienced this problem or found a solution to it?
My audio interface is a Prism Sound Orpheus.

What sampling rate are your DAW's operating at?
Sometimes you'll get noise and 'bit crushing' distortion if the main OS X system is set at, say, 44khz and your DAW tries to switch to something like 88 or 96.
I often switch between 48 and 44 khz on my system (with MOTU audio hardware) and it USUALLY works seamlessly, but every now and then there's bit-crush effect as the system adjusts the sampling rate. For some reason, the Mac will occasionally make the transition from one sampling rate to another veerrrrry sloooowly, as if changing speed limits with the lightest accelerator foot on the planet... Might take a minute or two, but it SHOULD eventually arrive at the new sampling rate and the distortion goes away.
SHOULD.
hope that's helpful. As Bee Jay said, check your audio driver (for the Prism) and see who's in control of sampling rate (ie. internal clock, external, etc.)
cheers

What is going on ?!?!? I can't start logic pro in 64-bit mode

I have been struggling with this issue for a while now, but I haven't made any progress. I am unable to start Logic Pro 9 in 64-bit mode. And when I say that, I mean that if I select the Logic Pro app in Finder, and say "Get Info," there is no "Start in 32-bit mode" option like all of the tutorials say to do. It used to show up, and I was able to start in 64-bit mode just fine, but suddenly, the option is not there, and the app is starting in 32-bit mode.
My Mac/OSX have been running so well, that I'm not too knowledgeable about where to even start looking for a solution. I am very comfortable with the Terminal, etc, so I can follow directions well, but I don't know where this problem stems from.
The machine is running in 64-bit mode, ie, if I do uname -a, it does return that the system is running in 64-bit mode. Logic runs just fine outside of not starting in 64-bit mode, but I want/need to be taking advantage of all of the RAM I spent so much money on.
I'm not sure what info would be needed, but here goes:
Mac Pro 3,1 (early 2008), 8-core 2.8Ghz.
10GB RAM
4 SATA HDDs
NVidia Geforce 8800 GT 512MB RAM
OS X Mavericks with all current updates
Logic Pro 9.1.x, again, with all updates available.
Steinberg UR22 audio interface (USB)
Also, I'm not sure if it matters, but I also have Windows 7 installed through Bootcamp, and it is running fine, and recognizes 32-bit/64-bit apps just fine.
I hope that's enough for someone to be able to tell me where to start looking. I really don't get it. This was happening when I first installed Mavericks. I ended up doing a fresh install from USB stick, and everything was going fine. I don't think that an update has changed things, as the last time I opened Logic, it did open in 64-bit mode. Suddenly though, that option is unavailable.
Is there a plist entry I can edit that will force it into 64-bit mode?
What part of the OS is in charge of this type of thing?
Any help is greatly appreciated.

Could be corrupted preferences.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic.pro.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro.
Be sure and use the ~ character in the path name.

HT202415 How does one set Logic Pro 9 to operate in 64 bit mode?

I would like to know how to set Logic Pro to run 64 bit mode. Thanks for your help.

Hi
Perhaps this will help
Logic Pro and MainStage 64-bit mode FAQ - Apple Support
CCT

Logic Pro 9.1.7 crashing on startup

I recently switched to a Mac Pro and installed Logic and it was running okay for a while then started crashing as I tried to bounce or save projects, I looked into this problem and found the Pro Kit solution and did what the forum said. I trashed the pro kit frameworks file. When I try to re-install pro kit 7 it says a newer version of Pro Kit is already installed and won't let me install. Logic won't open at all now. I am running Lion. Here's my crash log:
Process:         Logic Pro [5666]
Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier:      com.apple.logic.pro
Version:         9.1.7 (1700.57)
Build Info:      Logic-17005700~1
Code Type:       X86 (Native)
Parent Process: launchd [5094]
Date/Time:       2012-07-06 13:56:54.059 -0500
OS Version:      Mac OS X 10.7.4 (11E53)
Report Version: 9
Interval Since Last Report:          147871 sec
Crashes Since Last Report:           8959
Per-App Interval Since Last Report: 117380 sec
Per-App Crashes Since Last Report:   15
Anonymous UUID:                      E6A13817-B5B4-4C26-81C5-819F133BA503
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: image not found
Binary Images:
    0x1000 -   0xbe7ff7 com.apple.logic.pro (9.1.7 - 1700.57) <E0B8F147-B690-4889-84FF-A409F39B402F> /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
0xe81000 -   0xe9ffef com.apple.XSKey (1.0.0 - 52) <71B94F53-15DB-9012-91F2-211F7C2CD790> /Library/Frameworks/XSKey.framework/Versions/A/XSKey
0xeae000 -   0xee1fe7 com.apple.music.apps.MAAudioUnitSupport (9.1.7 - 233.39) <13FB1823-E7E6-A34B-6D89-E30D01605DC1> /Applications/Logic Pro.app/Contents/Frameworks/MAAudioUnitSupport.framework/Versions/A/MAAudioUnit Support
0xeee000 -   0xf1fff3 com.apple.musicaudiodataservices (1.1 - 250.92) <11E60B69-F34E-72B0-DC8E-BC23B4D9D949> /Applications/Logic Pro.app/Contents/Frameworks/MAAssetSharing.framework/Versions/A/MAAssetSharing
0xf2e000 -   0xf30fff com.apple.ExceptionHandling (1.5 - 10) <7C514CC4-7951-31CA-AEB3-D4AF49F44AE7> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xf36000 -   0xf94ff3 com.apple.music.apps.MALoopManagement (9.1.7 - 218.94) <E1772A24-827D-AF1F-7C09-E25FC729F95B> /Applications/Logic Pro.app/Contents/Frameworks/MALoopManagement.framework/Versions/A/MALoopManagem ent
0x8fe08000 - 0x8fe3aaa7 dyld (195.6 - ???) <3A866A34-4CDD-35A4-B26E-F145B05F3644> /usr/lib/dyld
0x90059000 - 0x90067fff libz.1.dylib (1.2.5 - compatibility 1.0.0) <E73A4025-835C-3F73-9853-B08606E892DB> /usr/lib/libz.1.dylib
0x90ea3000 - 0x90ea3fff com.apple.audio.units.AudioUnit (1.7.2 - 1.7.2) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9176c000 - 0x918befff com.apple.audio.toolbox.AudioToolbox (1.7.2 - 1.7.2) <E369AC9E-F548-3DF6-B320-9D09E486070E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x91904000 - 0x91bb6ff7 com.apple.AddressBook.framework (6.1.2 - 1090) <0DCD5DB2-81DC-3103-A1F7-DC6960184C61> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x91f9c000 - 0x91fa4fff com.apple.DiskArbitration (2.4.1 - 2.4.1) <28D5D8B5-14E8-3DA1-9085-B9BC96835ACF> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x93975000 - 0x93975fff com.apple.Carbon (153 - 153) <63603A0C-723B-3968-B302-EBEEE6A14E97> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9620f000 - 0x96270ffb com.apple.audio.CoreAudio (4.0.2 - 4.0.2) <E617857C-D870-3E2D-BA13-3732DD1BC15E> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x96298000 - 0x9646ffe7 com.apple.CoreFoundation (6.7.2 - 635.21) <4D1D2BAF-1332-32DF-A81B-7E79D4F0A6CB> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x96470000 - 0x964d4fff com.apple.framework.IOKit (2.0 - ???) <88D60E59-430D-35B8-B1E9-F5138301AEF9> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x97c8b000 - 0x97d6cff7 com.apple.DiscRecording (6.0.4 - 6040.4.1) <08BADDAD-FA79-3872-9387-EEE2A9FAA2F0> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
0x995ea000 - 0x9986ffe3 com.apple.QuickTime (7.7.1 - 2330) <060B6A47-FC15-3D38-8EFB-FCF38680510B> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
Model: MacPro5,1, BootROM MP51.007F.B03, 12 processors, 6-Core Intel Xeon, 2.4 GHz, 12 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: DIMM 1, 2 GB, DDR3 ECC, 1333 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 2, 2 GB, DDR3 ECC, 1333 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 3, 2 GB, DDR3 ECC, 1333 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 5, 2 GB, DDR3 ECC, 1333 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 6, 2 GB, DDR3 ECC, 1333 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
Memory Module: DIMM 7, 2 GB, DDR3 ECC, 1333 MHz, 0x802C, 0x394A53463235363732415A2D314734443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en2
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: Hitachi HDS723020BLA642, 2 TB
USB Device: TonePort UX8, 0x0e41, 0x4149, 0xfd300000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd100000 / 3
USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0xfd120000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, 800mbit_speed
Any help is appreciated.

Yup - exact same thing happened to me.
I was migrating from an older Mac Pro (2006, 1,1) running Snow Leopard to a brand new Mac Pro running Lion.
I was having weird 'insufficient access" errors, even after repairing and fixing all permissions. An Apple Support doc recommended trashing and reinstalling the prokit.framework.   But after trashing it, the OS would not let me install the new one, saying "a newer version is already on your system".    THe OS seemed to think I had a newer version even though I'd trashed it, and programs (Logic, iPhoto, Final Cut) would crash immediately on startup, saying the framework file was not found.
Grr.    Calls to Apple Support proved fruitless. The OS support guys tried hard but were baffled and sent me over to Logic support guys who were not only clueless but arrogant -- they insisted my hard drive was faulty even though it worked with every program except Logic and passed every diagnostic test.
I tried reinstalling Logic Pro from original disks. No fix.   I tried the OS 10.7.4 combo updater reinstall. No fix.
My fix was to copy the prokit.framework file from my old Snow Leopard machine onto the new machine.   At least now I'm able to run Logic but only in 64 bit mode.   Attempting to run 32 bit causes an immediate crash on startup. This ***** coz as we all know Logic only scans certain plugins when in 32 bit mode.   Also, since Logic "Pro" STILL can't export audio to quicktime movies in 64 bit mode, I have to use iMovie to submit my work...
I'm still hoping there's an answer for this one.   I'll be installing Mountain Lion soon and MAYBE that will do it -- but I don't dare attempt it while I'm still in the middle of projects that are currently running shakily, but at least they're running.
I'm at least a little heartened to see that I'm not the only one stuck in this bind.

*Logic Pro 9.1.1, Garageband, Waveburner, Abelton suddenly crashed and won't open at all !

I recently was working on a project in Logic Pro 9.1.1, saved the project and put my macbook to sleep. When i return, my mac wont turn on for the first 10-15 minutes sitting on the blank screen with the rotating circle. When it finally loads through and comes on I find that my Logic Pro software along with Waveburner, Garageband, Abelton, basically any DAW that i try to run will not open. The application icon just bounces and then shows the crash report, i also tried simply opening the project file. I have tried re-downloading the Logic Pro software with no luck. I desperately need this software to be working again, i will post the crash report along with this hoping someone could help out.
Thanks, Alex
(CRASH REPORT)
Process:         Logic Pro [890]
Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier:      com.apple.logic.pro
Version:         ??? (???)
Build Info:      Logic-16975300~2
Code Type:       X86 (Native)
Parent Process: launchd [401]
Date/Time:       2013-10-27 13:54:34.656 -0400
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          4718324 sec
Crashes Since Last Report:           350
Per-App Crashes Since Last Report:   272
Anonymous UUID:                      66A4370A-7908-4B32-B309-C95740C3D8C9
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
Model: MacBookPro8,2, BootROM MBP81.0047.B04, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.69f3
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 698.64 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Alex,
If you have to ask about backups then I would have to assume you have not been making any.. be it Clones of your System Drive using Carbon Copy Cloner or SuperDuper! (My personal favorite) that you manually save to an external HD or you haven't setup and been using Time Machine that is built into OS X that automatically backs up everything to an ext HD. I highly recommend you use one of those methods from now on... and in fact i highly recommend you use both methods.. as the Clone method allows you to quickly wipe out everything and reinstall from the clone image to take you back to where you were before any issue arrived. I make one every time before I upgrade anything major.. and I also make one every week...
So, as i said, did you try checking and repairing your System Disk using OS X's Disk Utility? That is the only possible other option you have at this time as you have no backups..
Other than that.. You will probably need to start again from scratch.... formatting the HD.. installing OS X and then your Apps etc...
Make sure you move/copy all personal data files such as Photos, docs, Logic Pro Projects and so on.....to an external HD before you reformat and start again... You can then move those personal data files back manually after you have reinstalled everything...

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

Logic Pro unexpectedly quit and now won't open at all please help!!

Hi all,
I have a Macbook Pro, 10.7.5 - just the standard one. I use Logic Studio (Logic Pro 9) and normally it works fine but the other day I tried to bounce a track and I got the beachball of death and the message 'Logic Pro has quit unexpectedly, a version has been saved xxxxx (crashed) etc'. This happened everytime I tried to save or bounce or import, in any session - a blank one, or an old one.
So I did some research and on an apple support page ended up deleting the 'Prokit' thing from my library, and downloading the new one (Prokit update 7 I think). I tried opening Logic again and got this message:
'Logic Pro cannot be opened because of a problem.
Check with the developer to make sure Logic Pro works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
Click Report to see more detailed information and send a report to Apple.'
I gave up a bit at this point, and thought I'd uninstall/delete every trace of Logic from my laptop, including the items in preferences (this was recommended online somewhere). I went through the (lenghty!!) process of reinstalling Logic and all the audio content and extra CDs, and the problem is still exactly the same and I can't open Logic.
Can anyone please help? I'm lost without being able to use Logic every day, any advise would be great!!
And I've also just updated Logic and still no luck.
Thanks,
David

No third party plug-ins, and no I didn't delete the /cs files.
I back up using time machine.
This is the latest crash report:
Process:         Logic Pro [251]
Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier:      com.apple.logic.pro
Version:         9.1.8 (1700.67)
Build Info:      Logic-17006700~1
Code Type:       X86 (Native)
Parent Process: launchd [152]
Date/Time:       2013-05-01 22:29:51.201 +0100
OS Version:      Mac OS X 10.7.5 (11G63)
Report Version: 9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: image not found
Binary Images:
    0x1000 -   0xbeafff com.apple.logic.pro (9.1.8 - 1700.67) <94981650-518B-2288-F07D-F28F27103100> /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
0xe84000 -   0xea2fef com.apple.XSKey (1.0.0 - 52) <71B94F53-15DB-9012-91F2-211F7C2CD790> /Library/Frameworks/XSKey.framework/Versions/A/XSKey
0xeb1000 -   0xee4fe7 com.apple.music.apps.MAAudioUnitSupport (9.1.8 - 233.53) <E8A99468-7726-CCFE-8D26-DDBC9D5E1AC3> /Applications/Logic Pro.app/Contents/Frameworks/MAAudioUnitSupport.framework/Versions/A/MAAudioUnit Support
0xef1000 -   0xf22ff3 com.apple.musicaudiodataservices (1.1 - 251.4) <0265F317-13AB-6CF1-A171-7D5853442E75> /Applications/Logic Pro.app/Contents/Frameworks/MAAssetSharing.framework/Versions/A/MAAssetSharing
0xf31000 -   0xf33fff com.apple.ExceptionHandling (1.5 - 10) <7C514CC4-7951-31CA-AEB3-D4AF49F44AE7> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xf39000 -   0xf97ff3 com.apple.music.apps.MALoopManagement (9.1.8 - 219.66) <0075F2D0-7A48-A362-2D49-4FECA5E9DF8E> /Applications/Logic Pro.app/Contents/Frameworks/MALoopManagement.framework/Versions/A/MALoopManagem ent
0x8fe41000 - 0x8fe73aa7 dyld (195.6 - ???) <3A866A34-4CDD-35A4-B26E-F145B05F3644> /usr/lib/dyld
0x91715000 - 0x919c7ff7 com.apple.AddressBook.framework (6.1.3 - 1091) <B8CC707C-6368-3CDD-BE38-D2335B7CC2DE> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x93efc000 - 0x93f0afff libz.1.dylib (1.2.5 - compatibility 1.0.0) <E73A4025-835C-3F73-9853-B08606E892DB> /usr/lib/libz.1.dylib
0x94942000 - 0x94a23ff7 com.apple.DiscRecording (6.0.4 - 6040.4.1) <08BADDAD-FA79-3872-9387-EEE2A9FAA2F0> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
0x95de5000 - 0x95e49fff com.apple.framework.IOKit (2.0 - ???) <94827954-5906-36C4-819B-24CDAFD85C72> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x96c87000 - 0x96dddfff com.apple.audio.toolbox.AudioToolbox (1.7.3 - 1.7.3) <F09C7075-2C4E-3A4F-A372-95D700125513> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x97e57000 - 0x980dcfe3 com.apple.QuickTime (7.7.1 - 2340) <76E45D49-3D4F-32AB-A411-E52C22FA24C8> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x9b079000 - 0x9b079fff com.apple.Carbon (153 - 153) <63603A0C-723B-3968-B302-EBEEE6A14E97> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9b080000 - 0x9b080fff com.apple.audio.units.AudioUnit (1.7.3 - 1.7.3) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9b233000 - 0x9b23bfff com.apple.DiskArbitration (2.4.1 - 2.4.1) <28D5D8B5-14E8-3DA1-9085-B9BC96835ACF> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x9b488000 - 0x9b65ffe7 com.apple.CoreFoundation (6.7.2 - 635.21) <4D1D2BAF-1332-32DF-A81B-7E79D4F0A6CB> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x9c98c000 - 0x9c9edffb com.apple.audio.CoreAudio (4.0.3 - 4.0.3) <7A14BE52-6789-3CE3-9AE9-B733F4903EB1> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio

Mac mini mid 2011 and logic pro 9 in 64-bit?

Hi,
I have a mac mini mid 2011 with a 2.7HGz intel core i7 processor and 8 GB of RAM. I have been using Logic Pro 9 in 32-bit mode and tried switching to 64-bit mode. I unchecked the "open in 32-bit mode" in the "get inf" section, but logic still opens in 32-bit mode.
My question is: Can my computer run Logic Pro 9 in 64-bit mode???
Thankyou!

Hi there jdtay2,
It looks like your model of Mac Mini does have a 64-bit processor according to the article "How to tell if your Intel-based Mac has a 32-bit or 64-bit processor"
Processor Name
32- or 64-bit
Intel Core Solo
32 bit
Intel Core Duo
32 bit
Intel Core 2 Duo
64 bit
Intel Quad-Core Xeon
64 bit
Dual-Core Intel Xeon
64 bit
Quad-Core Intel Xeon
64 bit
Core i3
64 bit
Core i5
64 bit
Core i7
64 bit
As far as opening Logic Pro in 64-bit mode, you will first want to make sure that you have the most updated version, as 64-bit support was added in the v9.1 update. The article below has more information about Logic Pro and 64-bit mode.
Logic Pro and MainStage 64-bit mode FAQ
http://support.apple.com/kb/ht3989
-Hope that helps,
Griff W.

64-bit logic pro won't open. Dyld error message

I am trying to open the 64-bit version of logic pro 9.1.1 but it keeps crashing when trying to open. I can't work out why it won't open but It gives the following error in the Problem Report if anyone can help me out here:
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AEProfiling.framework/Versions/A/AEProfiling
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: no suitable image found. Did find:
/Applications/Logic Pro.app/Contents/MacOS/../Frameworks/AEProfiling.framework/Versions/A/AEProfili ng: mach-o, but wrong architecture
/Applications/Logic Pro.app/Contents/MacOS/../Frameworks/AEProfiling.framework/Versions/A/AEProfili ng: mach-o, but wrong architecture

Hmm, very strange, never seen this message before. Have you tried going into Disk Utility and running a "Repair Disk Permissions" on your Macintosh HD? Can't guarantee it will fix the problem, but worth a try.. If you get really stuck, the simplest thing to do is just to uninstall Logic and then reinstall it, apply updates etc.. and try 64 bit again.
Dan.

Anyone got a 3ghz yet? (Logic Pro Related)

Greetings all,
Has anyone got a 3ghz Mac Pro yet? and if so, how's Logic Pro, Reason and Audio Interfaces behaving with you?
Getting ready to order one of them bad boys, just want to know if there's anything I should be aware of before I take the plunge. Thanks in advance.
LGK
Power Mac G5 DP 2.5Ghz Mac OS X (10.4.7) 5GB RAM - 500GB HD

Hey LGK yes me! & it does burn! mind you i have to admit I've had about 5 crashes in logic only when rewired to LIVE 5.2 UB
and I just had to trash logic prefrence file as wouldent load! (1st time)
the CPU distrubition is not perfect (waiting.... and waiting... 10.5)
havent got reason intstalled yet
and dont forget about Universal Audio Units.... theres not too many (espcially free ones) I have a copy of NI Komplete 3 & it runs great under rosetta BUT I want it all in logic as AU plugins! where the heck is the converter hahaha
If anyone has any info on universal AUs pleeeasee let me know!!!
Waiting on the mac pro over the Quad G5 was hard but i only have more waiting.
good luck!
sam

Problems starting Logic pro

I have just installed logic pro upgrade software 9.0 then updated to 9.1 logic 7 was installed before this and that fired up fine. on trying to open 9.0 or 9.1 I get the following error
Logic pro quit unexpectedly: opening the report gives the following info:
Process: Logic Pro [268]
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier: com.apple.logic.pro
Version: ??? (???)
Build Info: Logic-16972300~1
Code Type: X86 (Native)
Parent Process: launchd [88]
Date/Time: 2010-01-15 23:28:12.988 +0000
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 100998 sec
Crashes Since Last Report: 3081
Per-App Crashes Since Last Report: 35
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/XSKey.framework/Versions/A/XSKey
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: image not found
Can anyone shed any light on my problem?
Cheers

Have a look through this thread:
http://discussions.apple.com/message.jspa?messageID=9879826#9879826

Logic pro 9 will not open

sorry guys i know you must hear this all the time, i am very new to the mac community.
I have just downloaded Logic Pro 9 and i am getting the following error
Process:         Logic Pro [806]
Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier:      com.apple.logic.pro
Version:         9.1.8 (1700.67)
Build Info:      Logic-17006700~2
App Item ID:     459578486
App External ID: 10394291
Code Type:       X86-64 (Native)
Parent Process: launchd [148]
User ID:         501
Date/Time:       2013-02-01 14:31:14.393 +0000
OS Version:      Mac OS X 10.8.2 (12C60)
Report Version: 10
Interval Since Last Report:          348 sec
Crashes Since Last Report:           3
Per-App Interval Since Last Report: 1 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      07F946FF-8A06-7569-5B22-C8011683E337
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: no suitable image found. Did find:
          /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit: no matching architecture in universal wrapper
Binary Images:
       0x100000000 -        0x100c18fef com.apple.logic.pro (9.1.8 - 1700.67) <EDA152B8-910C-6010-621F-7A2CB64BC6CB> /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
       0x101086000 -        0x1010a4fef com.apple.XSKey (1.0.0 - 52) <800DD908-E341-2BCD-11D9-DEAC7E8197E9> /Library/Frameworks/XSKey.framework/Versions/A/XSKey
       0x1010b6000 -        0x1010f0ff7 com.apple.music.apps.MAAudioUnitSupport (9.1.8 - 233.53) <B92629D6-A8BC-D2CA-EC11-CE2133CC973D> /Applications/Logic Pro.app/Contents/Frameworks/MAAudioUnitSupport.framework/Versions/A/MAAudioUnit Support
       0x101115000 -        0x101143ff7 com.apple.musicaudiodataservices (1.1 - 251.4) <93B2F8C3-E091-C1CA-8932-91840CC968BC> /Applications/Logic Pro.app/Contents/Frameworks/MAAssetSharing.framework/Versions/A/MAAssetSharing
       0x101157000 -        0x101159fff com.apple.ExceptionHandling (1.5 - 10) <47FF83ED-0C07-308C-A375-2A2189DB1056> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
       0x10115e000 -        0x1011c1ff7 com.apple.music.apps.MALoopManagement (9.1.8 - 219.66) <78F9FDA0-502C-DB75-1963-FEA5B7187087> /Applications/Logic Pro.app/Contents/Frameworks/MALoopManagement.framework/Versions/A/MALoopManagem ent
    0x7fff6da24000 -     0x7fff6da5893f dyld (210.2.3) <36CAA36E-72BC-3E48-96D9-B96A2DF77730> /usr/lib/dyld
    0x7fff8c3ec000 -     0x7fff8c459ff7 com.apple.framework.IOKit (2.0 - 755.18.10) <142E19DD-1C8D-3D61-ABC8-83994A73279F> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x7fff8fb65000 -     0x7fff8fc38ff7 com.apple.DiscRecording (7.0 - 7000.2.4) <E5F3F320-1049-32D8-8189-916EF5C40A1A> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
    0x7fff90a90000 -     0x7fff90aa2ff7 libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
    0x7fff928d8000 -     0x7fff92a29fff com.apple.audio.toolbox.AudioToolbox (1.8 - 1.8) <833DA682-A3C1-39E7-AEC3-9EDC734DE2A9> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x7fff93868000 -     0x7fff93868fff com.apple.Carbon (154 - 155) <1B2846B1-384E-3D1C-8999-201215723349> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x7fff93947000 -     0x7fff93b30fff com.apple.CoreFoundation (6.8 - 744.12) <EF002794-DAEF-31C6-866C-E3E3AC387A9F> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x7fff965db000 -     0x7fff965dbffd com.apple.audio.units.AudioUnit (1.8 - 1.8) <29E2C990-3617-3FA2-BDD7-DB7DF493E443> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x7fff97a6b000 -     0x7fff97a71fff com.apple.DiskArbitration (2.5.1 - 2.5.1) <F7DAF7CC-5893-3F06-9168-3B0192B66D15> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
    0x7fff989e6000 -     0x7fff98a43fff com.apple.audio.CoreAudio (4.1.0 - 4.1.0) <B3198BD6-EA1D-3E5E-ADD4-37D8E6B72678> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x7fff990a7000 -     0x7fff9936aff7 com.apple.AddressBook.framework (7.1 - 1167) <92EF9CE4-A42B-3D30-8CA2-79C0A66BB4CE> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0253, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
I am running Mountain Lion and Logic on 64 bit if that helps. Please bear in mind i'm new to Mac so sorry if i am being stupid
thanks in advanced

It does help as it might explain what has gone wrong with your upgrade...
Unfortunately there is no easy solution for this problem.. I have seen it several times in the past with my clients... and in reality, the only real fix is to start from scratch with Mountain Lion as i describe in this thread....
https://discussions.apple.com/message/21094000#21094000
Sorry.. I know it is a huge pain in the butt.... but apart from going back to Snow Leopard and using Logic Pro 9.1.8 with that (Which you can do if you made full backups before you upgraded) this method is really your only solution I'm afraid to say.... as it seems your upgrade 'screwed the pooch' so to speak....

Logic Pro 7 & Reason 3.0 - Cycle Mode Sync

Similar Messages

Maybe you are looking for