Logic pro 7 session won't let me extend the length of my sequence

that slider at the top that lets you extend the length of your sequence won't budge passed 2318 or somenthing like that. Is their a cut off limit? why isn't it let me extend it any further?

This is from the Reference manual page 93
Song End
Below the song title, you’ll see a numerical field that indicates the song end position. As soon as Logic reaches this position, it will stop automatically, except when recording. In this situation, the song end point is automatically moved to the end of the recording.
The maximum length of a Logic song is 8550 quarter notes, or about 2158 bars in 4/4 time.
A song can therefore last a maximum of around 70 minutes at a tempo of 120 bpm. At 95 bpm, the maximum length is o ver an hour and a half.
If you need to increase this length, for film synchronization as an example, just halve the tempo. You can achieve the same result by using 4/8 time instead of 4/4 time, and treating quarter notes as eighth notes. A 4/8 song at a tempo of 60 bpm (equivalent to 4/4 at a tempo of 120) has a maximum length of more than 4273 bars, or over 2 hours and 22 minutes.

Similar Messages

  • HT200055 I have flattened a take folder, but Logic Pro X will still not let me use the crossfade tool on the clip.

    I have flattened a take folder, but Logic Pro X will still not let me use the crossfade tool on the clip.  How can I crossfade a flattened take folder?

    Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
    Best of luck.

  • Registered quicktime pro but it won't let me use the fitures, asks me to buy it

    I purchased quicktime pro and registered. It still asks me to purchase when I try to use.

    What I mean is what is happening when you try to buy the movie? Does the cost of the movie exceed to amount of the gift card? Many areas/states/countries add a sales tax or a VAT to the purchase that will exceed the card amount.
    what exactly is happening? Describe?

  • I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding"

    I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding" and I try opening it in my Finder and it'll say "The Application 'Safari' cannot be opened." and below that it'll say "-1712" Please help? I would really like to open it again.

    The application Safari can't be opened -1712
    What to do about "The application 'Safari' can't be opened" -1712 ?

  • Updated to latest operating system on MacBook Pro and now won't let me drag files onto a flash drive.

    Updated to latest operating system OS X Mavericks on MacBook Pro and now won't let me drag files onto a flash drive.

    The Flash Disk must be NTSF formatted. Writing to NTFS requires 3rd party drivers (Tuxera, Paragon). Reading from NTFS however does not require these. So install NTFS drivers, or format the drive in FAT32 from Disk Utility.
    Hope this helps :-)

  • HT201364 I have a brand new macbook pro, but it won't let me download mavericks

    I have a brand new macbook pro, but it won't let me download mavericks

    You have got a Late 2013 MacBook Pro.
    This MacBook uses a special OS X Mavericks version which is newer than the one available in the Mac App Store, so you cannot download OS X Mavericks from the Mac App Store now. Instead, if you need to reinstall OS X, you will have to do this through Recovery (hold Command and R keys while your computer is starting up).
    You will be able to download OS X Mavericks from the Mac App Store when your Mac uses the same OS X version as all other Macs. This may happen when Apple launches OS X 10.9.2

  • Logic Pro X Project won't Open

    Hello Community,
    I'm having trouble opening one of my Logic pro X Projects. When I do, Only the last plug-in I used open but I can't manage to open the logic project itself. Any insights on this? Thank you.

    If pressing CMD + 1 doesn't fix things...
    To rescue the project, try the following...
    Close the problematic Project
    Create a New project....
    Now use the Selective Track Import feature in Logic Pro, to import the tracks and each tracks plugins, routing, content and so on...from your problematic Project into the new project,,,
    http://music.tutsplus.com/tutorials/how-to-use-selective-track-import-in-logic-p ro-9--audio-3181
    Note: This tutorial is for LP9 but it works the same way in LPX

  • I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

    Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

    This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
    Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
    Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
    Also, you have no MIDI keyboard? Are the pedals both "standalone"?
    I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
    But much better would be to configure the pedal(s) correctly.

  • Satellite L850 - Win8.1 won't let me install the chipset drivers

    Hi,
    After i upgraded to windows 8.1 pro 64 bit from windows 8 64 bit (pre-installed), i figured that windows won't let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64 bit), but they remain with the windows drivers installed for them.
    The device manager shows everything installed and properly using. Also, when the set up was running to install the chipset driver, it skipped most of them, to install only a missing driver (sadly haven't kept any screen to show). I tried to install using the device manager (either auto search or manually browsing in the pc the downloaded files from site), but it keeps saying that drivers are up to date (having drivers with version of 2006, when the latest on site are 2014). Any suggestion of what to do?
    Model name: Satellite L850-1MK
    OS version: Microsoft Windows 8.1 Pro 6.3.9600
    CPU: Intel(R) Core(TM) i7-3630QM cpu @ 2.4GHz
    GPU: AMD Radeon HD 7600M

    Problem solved, after even a deeper google search, i found that if y make a shortcut and add to it a command (-OVERALL), it forcefully installs all components.
    Message was edited by: chmpotzolis

  • HT5622 iPhone is stuck on old ID and won't let me change the ID to get into Cloud segment of Settings.  Need to get this straight so I can backup to Cloud before updating to new System

    iPhone is stuck on old ID and won't let me change the ID in settings to get into Cloud.  Want to sync phone to Cloud before updating the Systems.  No such problem on other phone or 2 iPads linked to account.  Help!

    Thanks Bob,
    That was just a typo.
    I have three accounts set up in Mail, one of which, apart my the username which is my son's, has exactly the same settings as the one that isn't working and remember it's affecting all my devices.
    I would feel happier even if I could create a fourth account on my MacBook Pro using what I know to be the correct password for the server but when I try it keeps defaulting to imap type, I don't get an option for Pop which is what I need.
    Oh Bum.
    K

  • I have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number

    i have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number. also, when i click buy, i get an error message saying, "application not found."

    There are two different LR’s, one with a serial-number licensing and one with a CC-signin license.
    You should uninstall the serial-number LR you have installed, then
    Quit the CC Desktop application,
    Restart the CC Desktop application—this will rescan what you have installed and not see LR,
    LR will now be on the CC Desktiop apps list, so install that.

  • I currently have my credit card on my iTunes account and when I have no money in my bank account it won't let me download the free apps even though they don't cost anything. How do I stop this so I can download or remove my credit card?

    I currently have my credit card on my iTunes account and when I have no money in my bank account it won't let me download the free apps even though they don't cost anything. How do I stop this so I can download or remove my credit card?

    All downloads from iTunes are tied to the account that downloaded it, you can't re-download content via a different account. You checked the spam folder on yourr old account as well as the Inbox, and depending upon how long ago you did it, have you retried getting it reset : http://appleid.apple.com, then 'reset your password' ?

  • I want to load Firefox on my computer at home, which is not connected to the internet. I want to download Firefox to my flashdrive and then add it to my computer at home. When I try to download Firefox, it won't let me change the path of where it download

    I want to download Firefox on a flashdrive so I can then download it to my home computer which is not connected to the internet. When I download Firefox, it won't let me change the path and so tries to download on a public computer, which isn't allowed. The reason I want it on my home computer is because I'm creating web pages and I want to view my html pages using a variety of browsers, including Firefox.

    From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
    You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

  • I was on Instagram and I clicked this link that lead me to safari but a box keeps popping up and it won't let me Delete the tab, can someone help me pleased??? I can't even use safari, is there a way to delete it or something???

    I Was on Instagram and I clicked a link that lead me to safari and when I got there a box kept coming up and saying a b c d e f g.... And so on. It won't let me delete the tab and I can't even use safari, can someone please help!!!!!??????

    Quit Safari completely, clear Safari and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the Safari app icon. Tap the home button or anywhere above the task bar.
    Go to Settings>Safari>Clear History, Cookies and Data.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

Maybe you are looking for