Logic Pro 8 not opening project file
Logic Pro 8 is not opening a project file of mine. As Logic is loading, I am watching the "progress" window which reveals all of the audio and sample files from the project as they are loading up. There is a particular .caf file that seems to get the moving grey and white bar stuck in the "progress" window. As a result, the project won't open. Prior .caf files appeared to load with no problem, so I used Sherlock and found the .caf file on my hard drive. Somehow, it's not being noticed by Logic during load up. Is there anyway to bypass the loading of certain audio files so I can at least get the Project open? I did a lot of editing that I would REALLY hate to lose. If I can get the project file open then I could place the audio back in later. When I found the problem .caf, Apple Loop Utility opened and revealed the file as being modified on 11/3/2010. All I did was drag the file to the arrange window. It wasn't cut or split in the window; so I am unsure as to what the "modification" could be. This may be contributing to why Project file won't open. Any help on how I could get the Project to open (despite the problem .caf flile) would be greatly appreciated.
D.
Try starting Logic & your project while holding down the ctrl key.
http://support.apple.com/kb/TS2047
Similar Messages
-
Premiere Pro CC not opening Project or AutoSaves!!
Hi Guys,
If anyone can help I'd be grateful as I am up against a major deadline after about 1 months work and all of a sudden Premiere Pro won't open this project!! I just starts to open and then I get this error message:
Can't get into this project or any of my auto saves of the same project? HELP!!
Only thing I can remember doing recently (although it was working fine since this) was updating my Nvidia and Cuda Drivers. I also installed NewBlue FX Plugin ColorFast. Would any of these cause the problem?
Any advice really gratefully received as I am starting to panic!
Cheers,
Alex
Camera On FilmsI've just come accross this bug too. I moved some of my media (one music file a .aiff) in the finder from one folder to another on the shared storage where my media is kept). I moved it purely for tiding purposes.
When I went to reopen my PremiereProCC project it would not open. It would get passed the Open Project timebar but then just hang.
When I moved the audio file back to it's original place the project opened fine.
This is a bit wierd because it has found offline files before but for some reason moving this audio file freaked PPCC out.
I've tried moving the audio file again and reopening and it would not open, moving it back and hey presto the project opens again.
The autosaves would also not open because of this file being moved.
It's very odd because I've had to relink a whole project before in PPCC because I'd transfered the media to a new drive but when you move one small file it can't handle it.
This bug needs to be sorted as I've just jumped from editing on FCP7 for the last 10 years and can't afford for stuff like this to happen.
If anyone has any clues on how to ensure that PPCC can relink moved media that would be great.
Cheers
Doug
running 7.0.1 (105)
OS 10.8.5 -
Premiere Pro CS6crashes when opening project files ...
01
02
After I work on my videos for long time, now Premiere Pro crashing when i open my projects.
It's hepen after I updated adobe softweres.
Can some one help me?OS: Windows 8
Operating System: Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_gdr.121023-1503)
Language: English (Regional Setting: English)
System Manufacturer: ASUSTeK COMPUTER INC.
System Model: Z9PE-D8 WS
Processor: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (12 CPUs), ~2.0GHz
Memory: 32768MB RAM
Available OS Memory: 32718MB RAM
DirectX Version: DirectX 11
Adobe Premiere pro CS6
I have Neat Video plug-in and I have used this plug in my videos projects. I uninstalled this plug after I updated adobe software and I installed again. But still I can't open my project files. -
My 2011 macbook pro will not open .epub files...why?
just bought a book on itunes and it is not opening on my mac book pro. Iphone and IPad, no problem. What elementary piece of knowledge am i missing?
You might wanna tryout Calibre http://calibre-ebook.com/ but it might not work with DRM-epubs.
-
HT1338 my macbook pro does not open videos file
Hello,
My mac book pro does not play any videos that i recorded by Sony HD camera. is there any solution please help me!!Hello, see if any of these help...
http://mccammon.org/keith/2008/04/24/importing-video-from-sony-hdd-handycam-to-m ac-os-x-105x/
http://www.iskysoft.com/topic-mts/mts-converter-for-mac.html
http://www.wondershare.net/ad/video-converter-ultimate/index_mac.html?gclid=CJOQ 2bnIx7MCFYl7QgodYS4Amw -
Final Cut Pro X not opening .fcp files
I just purchased Final Cut Pro X. I am trying to open a .fcp file that was created in a previous version of Final Cut Pro, however it keeps giving the error "final cut pro cannot open files of this type".
When I look at the details of the file, in shows as a "Unix Executable File", but the extension is still .fcp.
Can anyone help?Thanks Tom. So...to open a previous version of a Final Cut Pro file there is no software that I can buy through Apple currently?
-
When I open a project it says it has lost the server connection, but the file is on an external FW drive. Tried local drive and another FW drive, same problem? FCP has worked flawless for ever, now this?
FCP 6Hi Brant, have you run permissions repair from the Disk Utility lately? I would try that, and FCP Rescue to see if you can get back into the game.
-
When i try to open my projekt in logic pro x it say audio files not found?
when i try to open up a projekt in logic pro x it say audio files not found why is this heppends?
This error typically means the audio files you used in this project are no longer found in their original location.. (did you move or delete them?) or you have renamed the audio files..... or they were located on an external HD etcand that drive or disk is no longer available.... because its not plugged in.
-
In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.
-
I subscribe to an Earthlink package of telephone and ISP through DSL in Dallas, Texas. To avoid the congestion (time outs and files not found) of the virtual "cloud" servers, as a workaround I connect to the Internet through dial-up on each session on my pc. There is only one pc or computer on my local network. I downloaded Firefox 4 RC and it failed (would not open video files on the Internet), so I removed the Firefox 4 RC program from my pc, and then I downloaded and installed Firefox 3.6.16, which works fine.
My operating system is Windows XP Pro.Try disabling hardware acceleration. Many visual bugs can be attributed to issues with graphics drivers.
(Firefox -> Options -> Advanced -> General -> [ ] Use hardware acceleration when available) -
I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardriveTry repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps. -
Premiere Pro CC does not open MOD files correctly
Hi,
I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
CheersPremiere Pro CC does not open MOD files correctly
That is correct: there is a bug in CC. In CS6 they work correctly.
Please file a bug report.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
http://forums.adobe.com/message/5658455#5658455
search for mod files and you will find one or two other threads. -
downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?
Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it. -
I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?
I get the same kind of thing..
I'm on osx 10.7.2 and once I click the soundtrack pro icon I get an error message. I had problems with logic pro & my digi002r soundcard midi drivers but now is fixed (using a midi adapter).
here is the code:
Process: Soundtrack Pro [1705]
Path: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Identifier: com.apple.soundtrackpro
Version: 3.0.1 (960)
Build Info: SoundtrackProProject-9600000~277
Code Type: X86 (Native)
Parent Process: launchd [140]
Date/Time: 2011-10-18 13:12:05.201 +0200
OS Version: Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report: 195725 sec
Crashes Since Last Report: 3
Per-App Crashes Since Last Report: 2
Anonymous UUID: 23728D81-590B-4C3A-8C67-1709945CD132
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found
Binary Images:
0x1000 - 0x7f7ff8 com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
0x947000 - 0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
0x952000 - 0x98ffff com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x9a9000 - 0x9f5ffb com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
0xa18000 - 0xc3eff7 com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
0xd49000 - 0xd49fff com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
0xd4d000 - 0xd54fff com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
0xd5e000 - 0xd6dfff com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
0xd81000 - 0xd83fff com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xd89000 - 0xe49fff com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
0x11000000 - 0x1102afeb com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
0x8fe88000 - 0x8feba9c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
0x90840000 - 0x90992fff com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x90993000 - 0x90993ff2 com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91e60000 - 0x92036fe3 com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x924a8000 - 0x92509ffb com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x93281000 - 0x9328ffff com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x93331000 - 0x93331fff com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x93332000 - 0x93493ffb com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x94326000 - 0x9436dfff com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x94420000 - 0x946a5fe3 com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x97dd0000 - 0x98082ff7 com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x99d12000 - 0x99d76fff com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x9adc8000 - 0x9adc8fff com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9aef1000 - 0x9aef1fff com.apple.Carbon (153 - 153) <6FF98F0F-2CDE-3888-A304-4ED447D24CE3> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9b2ec000 - 0x9b2ecfff com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-402AA0, 500,11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: USB to Serial-ATA bridge, 0x04fc (SUNPLUS TECHNOLOGY CO., LTD.), 0x0c25, 0xfa120000 / 6
USB Device: iLok, 0x088e, 0x5036, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: UM-2G, 0x0582 (Roland Corporation), 0x0106, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
FireWire Device: Digi 002Rack, Digidesign, 400mbit_speed
thanks everyone
e -
I switched to mountain lion and from Acrobat pro 9 to 10. now safari will not open pdf files. acrobat preferences says it is trying to use version9 to open and i removed version 9. any ideas?
Make sure you have updated Acrobat X to the latest version 10.1.3. They updated the PDF plug-in in 10.1.1: http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_ 10.1.1.pdf#page=4
Maybe you are looking for
-
Hi, I have scheduled for the update optimizer statistics immediately in DB 13 it failed with the error as "Job started Step 001 started (program RSDBAJOB, variant &0000000000012, user n
-
All day events sync with Outlook
I have no issues with sync my iPhone with Outlook throught iTunes. Only one. When I create all day event on my iPhone Calendar and then syncing it with Outlook 2003 my event has shifted time zone at Outlook (with "clock" marks). It looks like I chang
-
C# application to execute both oracle and sql server script files.
Hi All, I am suppose to develop an application using c# which can execute oracle script files as well as sql server script files based on some user's choice. Both the script files(oracle/sql server) contains scripts to create tables, create views an
-
Oracle BAM Alerts ,Clock error
Hi I've created alerts in oracle BAM for a report on an hourly basis. When I try changing the time range a browser error pops up with the following error text. "Unable to set value of the property 'innerText': object is null or undefined" and a url d
-
IPhoto & iPhone Album order is different
I can't seem to find any answers to this, I have around 100 albums in iPhoto on my Mac, they are all synced to my iPhone, but on the phone they are just being displayed in a seeming random order. I have removed all the photos from the phone and start