Logic Pro 8... not with Mavericks !
Logic Pro 8 gets all black, behind the playhead.
Before, on Lion 10.7.5, it was working fine.
Now, on Mavericks, it is **** !
Mavericks was free... but now I will have to spend $200.00 on Logic Pro X.
I should have stayed with the old system.
You can try reverting to 10.7.5.
Revert to a Previous OS X
Revert to former OS from Mavericks
Similar Messages
-
Logic pro 8 problems with mavericks
Logic Pro 8 worked fine with snow leopard. Just upgraded to mavericks and now when the playhead moves across the screen it wipes the track region clean (leaves empty black space). If you use the slider to move the viewable area from Left to Right the area refreshes and becomes viewable again but this is a major pain and a dissapointment.
Anyone else experience this? Know a fix?
Thanks.Re your comment and assumption: If you choose to buy a new Mac (and that in itself indicates you are not struggling that much financially) at no point in my post did I say I had done that or even intended to!
Well, to have to run Mavericks and not being able to downgrade to an older version of OS X indicates you just have bought a recent Mac.... because modern Macs cannot run, say Snow Leopard as that particular OS X doesn't support the modern hardware found in recent Macs..
That is, of course...unless you meant there is a different reason why you can't/won't downgrade? If the latter is the case then that is a choice you are making based on your own priorities.. which was the other point i was trying to make.
Re your: and complaining about it here.. is a waste of everyone's time... surely noone is under any obligation to reply, or even to read a post. And "everyone" in this case appears to be just octopi and you! Goodness me.
Actually.. I was refering to yourself (and others who do much the same thing) more than anyone else.... As I said, because Apple 'isn't here" complaining here about Apple's actions is frankly a waste of your time (and efforts) and everyone else's for that matter. hence why I included that link which demonstrates a much more effective manner of getting across your displeasure with Apple's polivies.. to Apple themselves!
I don't believe that octopi's post indicated any form of arrogance or bullying.. Just him venting the much felt frustration over posts from people who don't do the proper research prior to upgrading their OS X and then complaining about it later!
Again, these type of posts are all too common here and in other such forums.. and after a while it does get a bit old you know.... especially when there is post after post on the same subject which few people take the time to read first before posting up their own post... repeating what has been said countless times before.
So please bear that in mind before passing judgement on octopi who actually does a great deal of good for the most part, and spends a good deal of his (unpaid) time.. helping out other users.. in these forums...
Cheers..
Nigel -
Hi, I want to know if Logic Pro X running on Mavericks works ok with M-Audio Fast Track before buying it.
Hi,
Yes the Scarlett 2i2 will work with Logic Pro or Reason, make sure you download the latest version of our driver (1.5 dmg for MAC) from focusrite.com downloads page.
Hope this information helps.
Best regards. -
I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
Why the mouse pointer in Logic Pro does not change shape during work???
It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
This thing drives me crazy!
Solutions?
Here some ideas in other foums:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
The Result:
Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
BUT
Reason and Nuendo dont' have this issue !!
I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
And that's not all!
After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple! -
Does Logic Pro 9 work with Mountain Lion?
Hey!
I was wondering...
My computer has Snow Leopard installed and i would really like to get Mountain Lion. BUT there is a problem... I don't know if Logic Pro 9 will with Mountain Lion. Can anybody help me with it? And also does Logic Pro 8 and the microsoft pack (word, powerpoint, excel etc. 2011) work too? Please help me if you know it
THANK YOU
Cheers
- KufaxSince I'm not in the middle of anything critical and have multiple backups, I decided to take the plunge and upgrade. I've only been running for an hour or so, but here's where I am:
2008 MacPro, 8x2.8Ghz, 16Gb RAM. SSL MADI PCIe card for I/O. Logic 9.1.7
Tested with a couple of recent, decent size projects (40+ tracks, VIs and plugins). Not seeing any perormance differences.
Working:
- Euphonix MC Mix
- UAD2 Duo
- Spectrasonics Omnisphere
- NI Komplete 8
- Waves 9
- Soundtoys 4
- Wallander Instruments
- EW Play
- Melodyne
NOT Working:
- Access Virus TI. Plugin opens but cannot connect to Virus. I am running the latest stable v4 release - I will try installing the v5 public Beta and report back. This is a deal breaker so if I cannot get it working I will roll back to Lion
- SSL Duende Native. Authorization is failing. Possibly a CodeMeter issue or just authorizations lost during upgrade - will look at this next.
Make sure you are running the latest iLok driver - there was one released a few days ago.
More as it develops. -
Will Logic Pro 8 Work with OSX 10 .7.5
Is Logic Pro 8 compatable with LION on a Mac Book Pro ?
2.33 GHz Intel Core 2 Duo
Memory 2 GB
Thanks for your help.CCTM wrote:
Hi
Logic 8.0.2 runs fine in Lion. The installer on the original dvd's will not run however, so you would need to install it using Pacifist.
CCT
edit
2G of RAM is a bit low.
2 GB is a bit lean, but LP 8 should be OK-ish with it. I used to run LP 8 on a G4 with only 1.8 GB. I would recommend the OP to install Menumeters, to keep an eye on RAM use. I ran Tiger (10.4.11), Lion probably has a bigger RAM footprint. If at all possible, go to 4 or even 8 GB. -
Is Logic Pro X compatible with Digi 002?
Is Logic Pro X compatible with Digi 002?
It s a problem for me to upgrade from my late 2007 macbook Core2Duo 2,16ghz system running snow leopard and protools 7.4.2 through digi 002 rack, Command 8 and emagic Unitor 8mk2, to my new macbook pro i5 2,5ghz...
I chose this MBP cos it has both firewire and thunderbolt BUT... people told me digi 002 would only work as a 16 input channels. No way to use the ADAT inputs from the digi... And to me it s the most important thing : i need the extra 8 inputs and mainly use the digital mixer convertors instead of the digi 002 convertors. So haow about you? does the adat work properly ?
Another problem : command 8 seems not to be supported either.
so before buying logic pro x , i need to know if it s gonna work normally and completly : spdif, adat and analog input, midi /i/o AND command 8 integration.
I m not sure it might work either on Avid software ( a shame !!)
I m ok to work again with logic after my 7 years using only protools IF i dont have to buy another audio interface and another midi controller...
here is the link for the last driver :
http://avid.force.com/pkb/articles/download/Digi-002-003-Drivers
here is a link for the command 8 drive rfor those who are lucky enough to have a protools 10
http://avid.force.com/pkb/articles/en_US/download/en379411
How is it possible that an "upgrade" finally results is a downgrade, as my new system cant match with the old one...
Unitor 8mk2 is perfectly working on 10.8.5 hop eit will work on 10.10 either... -
I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.
My original question :
I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features? -
HI. ...
Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
I have heard rumours in the past is that all sorted now?At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version
-
I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD?
I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD, what do I do?
Hi, mmayers.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting. The second article covers the recommended settings for current Wi-Fi access points.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H. -
I am having some trouble on a couple of accounts using IBM Notes with Mavericks. On my workstation, I upgraded to Mavericks and installed the new IBM Notes 9.0.1 with no troubles. However on two other Macs of the same model, I upgraded them to Mavericks and installed IBM Notes and then Notes did not run after the initial setup procedure. It will begin to launch, but will just drop out.
The curious thing was, I entered the Admin account on one of them and launched IBM Notes and entered the information for setup, using the Mac user's info, and it runs just fine in that Admin account. However, it will not run in the user's account. So, what may be the problem on his account that prevents it from running?
The following comes from a part of IBM Notes' Expeditor logs resulting from one of the failed attempts to launch that app:
CWPNL0097E: Could not open /Users/temp/Library/Application Support/Lotus Notes Data/Expeditor/Applications/.config/args.properties for writing! : Permission denied
I don't know if this is a critical point or not.You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions -
CAN LOGIC PRO X WORK WITH WIN 7 OS 64 BIT
IS LOGIC PRO X COMPATABLE WITH WIN 7 64 BIT
No. It runs on OS X only.
Please stop typing in caps. It is considered shouting on the web and is also more difficult to read.
Allan -
Is Logic Pro X compatible with my Apollo Twin?
Is Logic Pro X compatible with Apollo Twin?
The question is: Is Apollo Twin "Core Audio" compatible.
Logic uses OSX's core audio system so if the Apollo has Core Audio drivers that are compatible with the version of OSX you're using then Logic will see the Apollo Twin as an available audio device you use. This is done using Logic's built-in Audio preference selection. -
Does Logic Pro 9 work with Yosemite?
Does Logic Pro 9 work with Yosemite? or do I need to upgrade?
Latest OS X & Logic Pro Compatibility Information
-
Is logic pro 9 compatible with os x lion
Is logic pro 9 compatible with mac os x lion
Hi,
See Here:
Logic for Lion
http://support.apple.com/kb/HT4807
Maybe you are looking for
-
2LIS_03_BX & 2LIS_03_BF Data Not loaded
Hi guys i have follow the steps for use the stock infocube 0IC_C03 i initialize the actual stock and initialize the material movements y made a data load of initial stock...next i made a load of historic movements....but in the monitor i foun that th
-
Create a link to a specific page, on the disc
Ok. I am creating a PDF that will need buttons to link to specific pages in other PDFs. I know how to do this if the PDFs are online but the boss needs a 'dvd delivered' SOOOooooo... -Root Main PDF (with button) -subfolder Target PDF (page 3
-
Hello Experts, I have created variants in BW for one of my report, I have created Crystal report on top of same bex query but I don't see variants I have created when I run my crystal report. Is it possible to see variants in Crystal or WebI reports,
-
My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?
-
My Curve 8520 wont retreive picture messages, help?
I have had my curve 8520 for about three weeks and whenever i get a picture message i try to retrieve it and i dont get it. it says receiving message for a while but then it just goes away, other times it will wont receive the message for a long time