Logic Pro 8 NOT working w/ Fast Track Ultra
I'm new to producing music and i got the older logic pro 8 from a friend today. The problem started when I tried to play a sound and nothing would come out from my Bx8's. I know its not b/c of the system preferences on my macbook cuz i can still play music on my itunes and sounds will still come out from things on the internet. Also, I went to LogicPro>> Preferences>> Audio and i made sure the device was on M-Audio Fast Track Ultra. When i put the device to Built-in Output i get sound so I know it has something to do with logic. If someone could guide me through this it would be GREAT.
I think you've turned things around. The topic title should read "Fast Track Utra not working with Logic".
Since Logic does produce audio when you route to Built In, that means that the FTU is the culprit. Have you installed the right, most recent drivers for it? Not from disk, but DLed from the M-Audio site? And what exact OS X and Logic version do you use?
regards, Erik.
Similar Messages
-
Will Logic Pro accomodate a M-Audio Fast Track Ultra?, Will Logic Pro accomodate a M-Audio Fast Track Ultra?
M-Audio is a bit slow getting drivers out but they eventually get it right so take heart... even companies like Focusrite don't have 100% compatible drivers for some of their hardware.
Not sure if -all- of the recent USB changes were released on time. I'm regularly in touch with a couple of plugin developers and both say Apple is notorious for last minute changes. Don't know if it's true or not. -
Is Logic Pro X compatible with M Audio Fast Track Ultra ?
I'm running Logic 8 Pro with M-Audio Fast Track Ultra.
I'd like to upgrade to Logic Pro X.
Will these components be compatible?If it has a Mountain Lion compatible driver then it should work. (Its not about LPX compatibility.. its about OS X compatibility that matters in almost every case)
See here for the drivers...
http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Ultra-Drivers
V2.2.2 is 10.8 compatible however there are several threads in their forums that indicate issues with 10.8.3 and higher...
Here is an example..
http://community.m-audio.com/m-audio/topics/driver_for_m_audio_fast_track_ultra_ mac_mountain_lion_10_8_3
Given that your interface is no longer a supported item.. and Avid have taken over M-Audio.. it might be that there will be no further updates leaving you unfortunately, with an out of date and no longer supported piece of hardware... which frankly is typical of M-Audio...
As a quick aside... This is why I stick with Motu equipment.. and have done so for many, many years now. Their support both for new and legacy devices is and has always been.. excellent.. and my original Ultralite Mk1 which is at least 7 years old now I believe, is still fully supported in the latest OS X version. using the latest Motu Drivers..
Anyhow.. Check with M-Audio/Avid to find out if this has been resolved...... -
My left click does not work on my track pad on my macbook pro 13 inch, is there a fix
my left click does not work on my track pad on my macbook pro 13 inch, is there a fix
I recommend you to run Apple Hardware Test > http://support.apple.com/kb/ht1509 It's possible that something is damaged, and Apple Hardware Test will help you finding it. Make sure you tick the option to run an extended test, and connect your Mac to the charger.
If your Mac came with DVDs, you have to insert the Mac OS X DVD to run Apple Hardware Test. As you haven't got the SuperDrive, you will have to buy an external optical drive -
I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
Why the mouse pointer in Logic Pro does not change shape during work???
It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
This thing drives me crazy!
Solutions?
Here some ideas in other foums:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
The Result:
Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
BUT
Reason and Nuendo dont' have this issue !!
I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
And that's not all!
After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple! -
My Macbook Pro crashes when I plug in m-audio fast track ultra
Hey Friends
I want to know if anyone of you who use a m-audio audio interface has the problem of your computer crashing, then having to restart, when you plug it into the usb drive. It started happening to me when I upgraded to Mountain Lion, and is still doing it on Maverick. I've placed the error report below since I don't understand it, to see if someone could help me figure out why.
Thanks
Anonymous UUID: B3788E35-0826-ED52-18E9-610442B2D598
Sat Nov 23 14:13:06 2013
panic(cpu 0 caller 0xffffff80026dc19e): Kernel trap at 0xffffff7f82f2bdb6, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000000000000093b, CR3: 0x0000000005419000, CR4: 0x00000000000606e0
RAX: 0x0000000000000003, RBX: 0xffffff801e6ed000, RCX: 0x0000000003000000, RDX: 0x0000000000000000
RSP: 0xffffff80f35abde0, RBP: 0xffffff80f35abde0, RSI: 0xffffff80f35abe20, RDI: 0xffffff801b7fd300
R8: 0x0000000000000004, R9: 0xffffff8029ee3930, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0x0000000000000000, R13: 0xffffff80f35abe20, R14: 0xffffff801dd55f00, R15: 0xffffff80292fed80
RFL: 0x0000000000010246, RIP: 0xffffff7f82f2bdb6, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000093b, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f35aba70 : 0xffffff8002622f69
0xffffff80f35abaf0 : 0xffffff80026dc19e
0xffffff80f35abcc0 : 0xffffff80026f3606
0xffffff80f35abce0 : 0xffffff7f82f2bdb6
0xffffff80f35abde0 : 0xffffff7f84dfd21a
0xffffff80f35abe10 : 0xffffff7f84df7ce9
0xffffff80f35abe40 : 0xffffff7f84df83a9
0xffffff80f35abec0 : 0xffffff8002ab05fb
0xffffff80f35abf20 : 0xffffff800264a15a
0xffffff80f35abfb0 : 0xffffff80026d6aa7
Kernel Extensions in backtrace:
com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f82f1e000->0xffffff7f82f7cfff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f82cba000
com.maudio.usb.fasttrackultra.driver(2.2.1)[00000000-0000-0000-0000-00000000000 0]@0xffffff7f84df6000->0xffffff7f84e13fff
dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f82fa4000
dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f82f1e000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000002400000
Kernel text base: 0xffffff8002600000
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 35802184912542
last loaded kext at 35797006502553: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f84e14000, size 20480)
last unloaded kext at 27817817981818: com.apple.driver.AppleUSBAudio 2.9.3f17 (addr 0xffffff7f84dfa000, size 303104)
loaded kexts:
com.maudio.usb.fasttrackultra.driver 2.2.1
com.paceap.kext.pacesupport.snowleopard 5.7.2
net.telestream.driver.TelestreamAudio 1.0.5
com.Cycling74.driver.Soundflower 1.5.1
com.eltima.SyncMate.kext 0.2.5b15
com.digidesign.iokit.DigiDal 9.0f4
com.rim.driver.BlackBerryUSBDriverInt 0.0.68
com.apple.driver.AppleUSBCDC 4.2.1b2
com.apple.filesystems.afpfs 11.0
com.apple.nke.asp-tcp 8.0.0
com.apple.filesystems.smbfs 2.0.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.11
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.kext.AMDFramebuffer 1.1.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.AMDRadeonX3000 1.1.4
com.apple.driver.AppleIntelHD3000Graphics 8.1.8
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.driver.AppleIntelSNBGraphicsFB 8.1.8
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleHWAccess 1
com.apple.kext.AMD6000Controller 1.1.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.kext.AMDSupport 1.1.4
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.4 GHz, 8 GB, SMC 1.70f6
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3037332E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3037332E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD10JPVT-22A1YT0, 1 TB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: Fast Track Ultra
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1Hi monicaxh1,
Here is an article of troubleshooting for when your iPod does not appear in iTunes:
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
The issues you are seeing may be connected, so I would try this troubleshooting first.
Cheers!
- Ari -
Syncing Fast Track Ultra (Slave) With Logic Express (Master)
I'm trying to get my fast track to slave with Logic Express, using Logic as the master. It doesn't appear to be sending out any messages. On my fast track I can get the midi 'in' light to blink but not the 'out.' in Logic, the transport bar on the bottom, says 'no midi' for both the in and the out. Does this sound like a Logic setup issue or a fast track ultra setup issue?
Hi,
1st: You need to set your drum machine clock to external. That's important if you want to make Logic the master. Be aware any clock signal only is available when Logic is in play mode (naturally, but sometimes i forget even the most logical things).
2nd: In the Audio-Midi-Setup, the Fast Track should be displayed. Open the MIDI window (Window-> show MIDI window). Click on the "add device" icon. A new device will be added (new external device). Now open the inspector for this new device. You can name it, adjust all these things like MIDI clock send/receive and other gizmos and give it a nice icon. Now you must "connect" this new device with you Fast track by simpy dragging a line from it's outputs to the Fast track input and vice versa. The MIDI setup window will now represent your hardware's cabeling.
Once you have done this correctly, you should be able to correctly select the Drum machine in Logic.
Fox -
Does Logic Pro 9.0 work with Mac OS X Lion?
I don't want to update to Mac OS X Lion from Snow Leopard until I know 100% that Logic Pro 9.0.0 is compatible with it.
On a side note, would Final Cut Pro 7.0 work with Lion as well (I will not be upgrading to Final Cut Pro X)?
Thank you!Okay peoples, I have great news!
I was told that maybe the update for Logic Pro 9.0.0 to 9.1.4 wasn't working for me because I must have renamed my software folder... and I remembered doing so back in 2010.
You see, my issue was:
I bought Logic Studio 8 (The big box with piano keys on the side) and then as soon as I did, Logic Pro 9 (the update version) came out. I was inclined to get the latest software, so I upgraded immediately. I remember wondering why my logic pro 8 stayed behind after the update so I foolishly renamed the folders "Logic Pro 8" and "Logic Pro 9" haha. Not knowing this would cause me grief later when I tried to update.
So, my Logic Pro 9 is working again fine. My only concern now is for the hardware (the Apogee Duet) I am using, as I have to wait for a Lion update in August, thankfully it is only a month away as apposed to 6
Cheers,
and I hope this helps.
Tuck -
Hice la actualización del sistema operativo y de iTunes en mi Mac mini Late 2012 a OS X 10.8.5 y ahora no me funciona la Fast Track Ultra ni Pro Tools 9HD. Necesito reinstalar el sistema operativo OS X 10.8.3 para poder trabajar. CÓMO LO PUEDO BAJAR?
GRACIAS.Te cuento yo tambien he tenido muy mala experiencia con fast track en lion y mountain lion el problema que describes lo solucione con el driver 1.9.2 pero en protools o logic no puedo usar las salidas 3 y 4 por que suena como entrecortado bien sea el daw q este utilizando o el itunes bien eso lo he sabido llevar pero lo mas fatal es que cuando trabajo en protools suele aparecer el kernel panic y debo reiniciar he investigado y por informe de error siempre suele ser la fast track pro a pesar de que compre su adaptador de corriente pensando que era por la escasa alimentacion usb que tiene ( falencia fatal que no tienen otras interfase de m audio como las fast track c 400 o 600 en avis nunca dan respuesta y en m audio pues que en paz descanse por que ya murio! desde q avid se apodero del basto negocio la unica opcion es psarse a mbox o a interfases hd!
-
Logic Pro 9 not seeing Avid Artist Mix
Hi Guys,
I've never posted in a forum before but I'm having some major trouble with getting my Avid Artist Mix Controller and Logic Pro 9 to communicate with each other. I've tried all sorts of things, set up a static IP address for the mix and computer, trying different start up combinations, uninstalling and re-installing Eucontrol and nothing seems to be working, this controller just sits on my desk displaying nothing and doing absolutely nothing. Here's what I've found so far in regards to it's behavior:
The Artist Mix IS connected to my computer, everything in my Network Preferences is green and when I open Eucontrol it's listed under My Surfaces as MC Mix. My computer is listed under work stations. Upon device start up the Artist Mix displays the Avid logo, however when Eucontrol starts up and connects the display on the Artist Mix goes dark. Upon opening Logic I see "Starting up Eucon Support" on the splash screen but then once it's open the Artist Mix DOES NOT do anything. When searching for the Euphonix or Avid devices in Logic's "Control Surfaces" Preference window I see a list of multiple different control surfaces (i.e. Mackie, Yamaha, etc) but no Euphonix or Avid devices. Also, I can open Eucontrol settings just fine before starting up Logic, however post Logic start up results in Eucontrol freezing and requiring a Force Quit, even after I've quit Logic. If anyone has any light to shine on this subject it would be infinitely appreciated. I've spent the past three days scouring the interenet for answers with zero success, Trying to get a hold of Avid Support which seems impossible (and expensive), and trying a bunch of "hunch" or "mildly informed" remedies of my own and nothing seems to be working. So far, I just have an incredibly expensive paperweight.
Here are my specs:
Computer:
Late 2011 Macbook Pro 13" 2.4 GHZ Intel Core I5
8 GB RAM
Running OSX 10.9.2
Eucontrol:
Eucontrol Version 3.1.0
Artist Mix:
Firmware up to date 1.5.2
Logic Pro:
Logic Pro Version 9.1.8bigpego wrote:
I have the same problem with Logic 10.0.7 OSX 10.8 and eucon 3.1.3. It doesn't work and I have test some combination startup. There are some news? Thank you very much
This solution posted above, seems to work very well... if you follow them exactly as stated.
I use artist mix in Logic Pro X and works fine, BUT I did have some initial problems. Firstly use latest eucon software. Then turn app nap off on the eucon application icon, after that, I switch mc mix on first, then mac, let it do it's stuff, then run eucon ( not auto load eucon). When eucon recognises mc mix, then load Logic Pro x.
Cheers..
Nigel -
M-Audio Fast Track Ultra - not getting any input!
I have been using M-Audio Fast Track Ultra to do some basic recording in GarageBand '09. I've never had a problem, but today i cannot get an audio signal to input from a mic or instrument. It seems that GarageBand is automatically setting the track recording level to zero and is greying it out. i can no longer control it. The audio OUTPUT works fine and i can use the fast track to monitor, but there is not input. btw, i tried using the built in audio on the MacBook and it works fine. is this a setting issue with Fast Track somehow? can anyone help trouble shoot this issue for me? Thanks!
futureman22 wrote:
i cannot get an audio signal to input from a mic or instrument.
have you set GB to use it:
http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
(Let the page FULLY load. The link to your answer is at the top of your screen)
GarageBand is automatically setting the track recording level to zero and is greying it out.
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen) -
The sound on my macbook pro is not working
The sound on my macbook pro is not working. When I increase the sound, the icon appears as if everything is working, but no sound comes from the speakers. Earphones don't work either. I have tried a PRAM reset but at times, this doesn't even work. It's really frustrating having to restart my computer every time I want the sound to work, and even when I do that, theres a 50 50 chance of it working again. It generally happens after my laptop goes to sleep and I wake it up. Has anyone else had this problem and fixed it or even know what caused it?
There are a lot of discussions around the earphone jack but I have checked that. I've tried a PRAM reset which hasn't worked, and my sound output is set to Internal speakers.
HELP!!Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers / Headphones
Make sure Mute is not enabled.
2. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it. -
It seems that the sound on my macbook pro does not work when watching videos such as those on youtube. Please help.
Here is YouTube's help page if you have no sound on YouTube videos:
http://support.google.com/youtube/bin/answer.py?hl=en&answer=58132
Try re-installing Flash player. I'm assuming at this stage that all your other audio works fine, e.g. CDs, DVDs, system sounds, etc... -
The "A" key on my macbook pro is not working Can I fix it myself?
The "A" key on my macbook pro will not work. How can I fix it?
-----Earnie---------Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
1. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own"
2.Reset PRAM. http://support.apple.com/kb/PH4405 -
Output volume on my MacBook Pro is not working
My output volume on my MacBook Pro is not working. When I go to "Settings", then "Sounds", then "Output", I can not slide the volume bar at all, or change it in the menu bar?
See if a PRAM reset will solve the problem;
http://support.apple.com/kb/HT1895
Ciao.
Maybe you are looking for
-
How to change source system in SAP BI
Hi, In Sap BI we are having a source system ECC1CLIENT100, based on this we developed all the data modelling, now due to some reasons we made a copy of the souce system ECC1CLIENT100 to ECC2CLIENT100 and we removed ECC1CLIENT100 from SAP BI connectio
-
Rendering HTML report from SSRS 2012 with full details
I want to get the parent level grouping and child data in a single HTML file from SSRS 2012 so that it doesn't try to refresh when clicked on expand/contract the tree. The reason is i'm getting SSRS report from java application and when i try to expa
-
Tabular - Model vs Perspective
Hi, I have a tabular model which has been in production for over a year with 30-some tables and reports in the 100's. Now I have been asked to add 10-15 new columns in the tabular model but they should only be available to a handful of people. Up unt
-
CS6 web premium vs. CC access for After Effects - conflicts?
Hi all, Apologies if there was any response to a similar question. If so, I've certainly struggled to find it. I currently have CS6 web premium installed (student edition), but I require access to After Effects for a single assignment. Obviously ther
-
Trouble upgrading to ios 8.0
hello, i have iPhone 5s ios 7.0.4 trying to update to ios 8.0, when i try to update with itunes it give me that error 3194 and when i try to restore manually using the ios firmware it does the same error, i have tried editing the HOST file but i'd no