Logic Pro 8 & TDM Error Codes, need help!

I am using Logic Pro 8 & TDM hardware. I am getting 2 error codes, only when I try to use the Audio Suite in the Sample Editor.
"Error code -7401 was returned by the DAE driver."
"2 times TDM error -7102 while trying to disconnect TDM."
What do these mean? I tried searching the net and found nothing useful. Otherwise Logic Pro 8 and TDM has been flawless, and all my hardware works perfectly in Pro Tools HD.
I am using a 96i I/O, and 1 Accel Core card and 2 HD Accel cards (PCIe).
Also the Audio Suite doesn't seem to process the audio as intended or at all. There 2 errors show up when I try to preview the effect, no matter what Audio Suite buffer size I use.
Thank you in advance for any info.

I've been trying to get Logic to work with DAE/TDM in Leopard on a Mac Pro now for months! How did you do it?? Been searching the internet for answers ever since I started, and would highly appreciate your response.
My most obvious problems are: No audio from Aux (EXS, ESB) or instruments. The whole program is "struggling" with awful "framerates" . . just moving the pointer takes forever.
When in Core-audio everything works fine.
I have reinstalled Leopard, Pro Tools and Logic several times, with no luck.
Please tell me how you did it!
Thx in advance!!
/K

Similar Messages

Logic 8 and TDM Error codes

Hi everyone,
I installed Logic 8 yesterday (when I still was happy in anticipation) and also uggraded to PT 7.31 (Mac G5, 2 x 2.7 GHz, 4.5 GHz Ram, Mac OS 10.4.10, ProTools HD).
On every Logic 8 startup I get a different 5-digit (?) DAE Error code, none of which I could find in Digidesigns database. The song I load up has several Kompakt, VSL-VI, FM8, Stylus RMX instances and played back alright on Logic 7. It does play in L8 when I click away the DAE error code message but soon complains about TDM overload.
I deinstalled ProTools and loaded the standalone DigiCoreManager for use of the PT hardware without PT software installed, but no luck. The DAE error code changed from 5- to 4-digit (does it mean the problem is getting smaller? :-))
So I reinstalled ProTools, which seems to work (I hardly ever use it, but it plays audio files alright), but L8 does the same things all over (once the error code even changed to 3 digit, yippieee).
Worst of all, Logic 7 crashes right after startup complaining about too little memory allocated to the DAE and not being able to find ESB TDM.
I'm at the end of my wits now. Apart from removing and reinstalling L8 (unfortunately I can't find an uninstaller) I can't think of anything else. Anybody any ideas?
Thanx,
jayleajay

had the same problem. was fiddling around with templates, loaded tdm prod. template and got tdm errors -7xxx. i guessed, that it´s the "old" digi eq II, but did not try it out because of client coming in for session. if you find out, please let me know. can you check that, if you have "old" tdms in your plug-in folder? maybe the template draws on old digi plugs.....

Macbook pro mid 2012 error code 50- help!

This morning I tried to download a ppt for class, which prompted the error code 50. I can't download any files, move any files (to trash or otherwise), or empty the trash. Finder and Disk Utility both show the startup Macintosh HD with 276.89 GB free, but the core storage shows only 19 MB. I've verified both discs and they seem to be fine, but I have no idea of what to do to help clear the core storage. Thanks

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

If you bought the boxed set of Logic Studio 2.0 which includes LP9, then you cannot download it. You must use the disks that came as part of the boxed set... to install from.
If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App, Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

Premiere Pro update failed - error code U43M1D206

Hi,
Premiere Pro update failed - error code U43M1D206
Windows 7 64 bits
All other apps were updated.
I tried all theses steps :
Solution 1: Restart your computer and try again.
Solution 2: Download the update from Adobe.com.
Solution 3: Uninstall and reinstall the Adobe Creative software you are facing difficulties applying the update too.
Avast Antivirus :
Infection MSIL:GenMalicious-ML [Trj]
Please look at the picture below :
Thank you for your help ;-)
Gilles

Hi Gilles V,
Please try: Error downloading Creative Cloud applications
Thanks,
Atul Saini

New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

So where is LR trying to copy the files? Check your destination in the Import panel at the right.

I erased all of the loops on my logic pro 9. Do i need to reinstall all discs, or are there specific discs to install "loops?"

I erased all of the loops on my logic pro 9. Do i need to reinstall all discs, or are there specific discs to install "loops?"

There's a new menu entry in the latest version, allowing you to download all the extra content directly onto your hard drive, without having to keep inserting new DVDs etc. It's 19gb (compressed). If you have a normal/decent internet connection, you could reinstall your loops while you're busy doing something else. Or busy doing nothing.

Yosemite made my MacBook Pro so slow !! Need help ? what is the solution?

Yosemite made my MacBook Pro so slow !! Need help ? what is the solution?

I've ran a benchmark on my Mac (iMac early 2009). Performance of Yosemite in general was about the same as Mavericks. But that can be different on other Mac's of course. Safari is mostly a bit slower. It's recommended you clean your old internet-caches and then restart Safari. (you can use a little app called CCleaner to do that). That might make a difference. Speed-issues are usually solved in the first and second update of OS X.

HT3702 error please need help

Dears,
I want pay for gems from clash of clan but the msg error please need help this problem take long time with me please please help me.
Regards,

If you haven't already done so then you can contact iTunes Support via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why it's appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have tried everything to correct Error Code 16 Help!

I have tried everything to correct Error Code 16 Help!

Hi leolion,
You might want to refer the KB Doc: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Regards,
Rave

I can't find my serial number and once I do I would like to move my Pro to another computer. Need help with both.

I can't find my serial number and once I do I would like to move my Pro to another computer. Need help with both.

Hi Rick ,
Here is the link that will help you find the serial number for your product quickly .
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
You would have to deactivate that software from your older machine first.
Refer to the following link to deactivate your product .
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
After it is deactivated from the older machine you can use it on your new machine just by entering the serial number of the product .
Let us know if you need further assistance.
Regards
Sukrit Dhingra

Logic board has an error code running A.H.T.

I ran AHT 2.0.1 on my MDD Dual 1.25 OS10.4.11
It said the logic board had an error code.
2PFW/2/3:Firewire
The test stopped.
I this serious?
What should I do?
Shamus

Firewire external DVD & HD work fine for me in 10.4.11. Never tried target disk mode.
Anyway, if AHT found an error with your firewire port, I'd say you have a hardware problem with the firewire port not a software problem.   If you have lived with it this long, you can live with it a while longer.
I guess the question it how do you skip the firewire hardware test???   I do not know. Anyone know?
Robert

Error code 2131 help needed

i am trying to burn some cds but every time i do i get this error code2131
i have upgraded the firmware as i have seen suggested i am at a loss any help would be graetly received ihave also run a diagnostic as follows.
Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
System manufacturer System Product Name
iTunes 7.7.1.11
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.1.5
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 132E7497457D9919
Current user is not an administrator.
The current local date and time is 2008-09-07 09:47:20.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8600 GT
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.7.3),
D: TSSTcorp CDDVDW SH-S203N, Rev SB02
Audio CD in drive.
Found 26 songs on CD, playing time 49:10 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:29:03
Track 3, start time 04:23:25
Track 4, start time 06:27:35
Track 5, start time 07:31:12
Track 6, start time 09:40:73
Track 7, start time 10:20:04
Track 8, start time 13:52:35
Track 9, start time 16:47:33
Track 10, start time 19:22:42
Track 11, start time 21:32:60
Track 12, start time 24:26:24
Track 13, start time 26:13:14
Track 14, start time 26:51:64
Track 15, start time 29:01:19
Track 16, start time 30:30:06
Track 17, start time 32:45:70
Track 18, start time 34:21:14
Track 19, start time 36:05:28
Track 20, start time 38:22:70
Track 21, start time 39:47:37
Track 22, start time 41:22:18
Track 23, start time 42:03:07
Track 24, start time 44:31:48
Track 25, start time 45:47:40
Track 26, start time 47:26:13
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24 32 40 48.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 2131(0x00000853). It happened on drive D: TSSTcorp CDDVDW SH-S203N on CDR media at speed 0X.

There has been an epidemic of 2131 burning errors associated with the TSST TS-L632* drive. And some manufactures have offered a firmware update or drive swap to fix the problem.
I have not seen this issue come up your your model of drive although it is the same manufacturer.
It would be worth checking your computer manufacturer's download site to see if there is a firmware update available for your drive.
Otherwise I don't think I can help apart from contacting your computer supplier.
Maybe someone else has some ideas.

Logic Pro 8 Issues, Error Messages

Hi all.
I've been having a variety of problems with my home recording studio, which i have neglected to post about until now- from what i've read it seems no-one knows how to fix them. I'm turning to the MacTalk community to resolve my woes... First things first, here's the gear:
 MacBook Pro (mid-2008), 2.4GHz C2D, 4GB RAM, OS X 10.5.6.
 I use Logic Pro 8 primarily, and this is where all the errors are popping up. I record to WAV, 24-bit, 48KHz (for the sake of diagnosing errors, I have tried 16-bit, 44.1KHz and noticed no difference).
 All audio-related work is handled on a WD MyStudio External FW800 HDD.
 My audio interfaces are an Apogee Duet, and an M-Audio ProFire 2626 (both running latest drivers).
Now, there are 3 (possibly related) problems i'm having with my setup.
✖ Problem #1
I receive an error message indicating a 'System Overload' at random times during playback and occasionally recording.
It halts the audio, and I need to click play or record again. Sometimes it happens again and again, other times it’s just a one-off. This problem can occur with either the Duet or ProFire interface. Apparently the number of tracks I’m recording or playing is irrelevant, as it happens under many different circumstances.
✖ Problem # 2
I receive an error message telling me that the “Drive is too slow, error -10004”, and this happens only in recording (I think; oh and it looks like the previous dialogue box). As mentioned above, I use a FW800 external HDD, so it shouldn’t be a hardware requirements issue – it SHOULD be fine as far as I know. It was particularly bad when I was recording 5 channels of audio into the ProFire 2626. Like the previous issue, it halts the recording, and sometimes recurs. It may not happen with the Duet.
I may be imagining things, but I think it records fine indefinitely when I’m recording near-silence, i.e. not playing my drums. It almost seems as though the problem is triggered when I get particularly loud. Perhaps it’s clipping, I’ll have to check. Still, it shouldn’t cause an error that halts recording should it?
✖ Problem #3
This one only occurs with the ProFire. I get minor crackles and little bits of distortion and ugly tearing sounds in some channels occasionally. They each only last a fraction of a second, and usually aren’t particularly loud, but they spoil takes. Can occur during silent passages OR loud parts.
For the record, I typically record to WAV, 24-bit, 48KHz, with a 128 or 256 sample buffer, Medium Process Buffer Range, and Software Monitoring enabled. However, I have tried up to 1024 sample buffer, Large Process Buffer Range, 16-bit, 44.1KHz WAV, and turned off Software Monitoring – none of this made a difference.
So, if anyone thinks they can help me out here, please do so! I’ll greatly appreciate any input ☺
Cheers,
Chris

1. http://support.apple.com/kb/TA24535?viewlocale=en_USy
This problem points to a buffer that is set too low. Make it one step bigger, but leave the I/O safety buffer OFF.
also: you can disable the warning message.
2.
CAN also be buffer-related, but it may be the disk. Is it a 5400 or 7200 RPM disk?
It may also be that memory is too full. I would recommend installing Menumeters (freeware) http://www.pure-mac.com/diag.html#menumeters
You can monitor CPU-use, disk activity, memory use, paging activity and network activity with it.
Another thing to consider is to Freeze all Software Instrument tracks before recording. Also freeze heavily 'insert-pluginned' audio tracks. This may free up a lot of CPU power.
3. This problem might benefit from the above tips as well, but I think you can win the most by NOT using software monitoring when recording (for all three issues); it brings extra latency and puts much more strain on the CPU. Through which plugs do you monitor? And why?
I'ld recommend using the direct monitoring capabilities of both your interfaces, and avoid Software Monitoring when recording. Also being aware of what is going on (by using both Menumeters AND Logics' own CPU-meters) can be crucial - especially Paging (when active RAM is written to or read from disk) can disturb Logic, as well as background OS X applications that kick in during a session.
I also recommend turning off Journaling before a recording session. To do that, open *Disk Utility*, select the recording disk from its' list, hold down the ⌥ key and choose the menu *File>Disable Journaling*.
To turn it back on after recording, same actions, only now the menu item will say *Enable Journaling*.
regards, Erik.

Logic Pro 8 & TDM Error Codes, need help!

Similar Messages

Maybe you are looking for