Logic Pro 8 with Triton Studio MIDI Data Not Sending

I have a Triton Studio (Korg), recently got a MIDI IN/OUT to USB plug in, for my macbook.
Never done this before, thus am trying to figure this out:
My computer is showing that the USB plug in is indeed there, and Logic Pro sees the device as well... however when I punch the keys in the keyboard, the data does not seem to transfer into the Logic Pro track.
I just want to get it set up, so I can record onto Logic Pro 8, creating music on this software. As in playing my board, having the software receive what I am playing. Just piano stuff really... Any help I can get is appreciated, I have looked through all sorts of forums and manuals, but maybe an explanation would help, or clarity on what the basic settings should be at, so it can work, then if it still does not work, then maybe there's another issue.
Also, when I start Logic Pro 8, it says "Cannot find DAE Folder in "System Folder" them "ESB TDM Plug-in not found"
Are these anything to worry about? This computer is used, thus I am not the first owner.

CCTM wrote:
Hi
Pancenter wrote:
The cable ends are labeled IN and OUT correct? They go into the opposite MIDI ports on the Keyboard.
The cable labeled IN goes to the MIDI OUT port on the keyboard....etc.
You need to use an external MIDI track or a Software (virtual) Instrument track to record MIDI.
Normally this is correct, but I have seen a USB Interface where the cables are labelled the other way round.... IN goes to IN, OUT goes to OUT.
Crazy situation, but might be worth checking?
CCT
That's one I've never seen but have no doubt they exist.
Perhaps a quality control issue.... Nah!
To the O.P.
Does the Korg Triton have to be enabled for MIDI out.
As I recall some Korg Triton models had both MIDI ports and a built in USB interface and there was a MIDI Menu where either port could be enabled. It's worth checking into even if your model does not have the built-in USB output.
Are you using 10.6.8 like your tagline says?

Similar Messages

In Logic Pro 9, how many midi controlled software instruments do you get...?

In Logic Pro 9, how many midi controlled software instruments do you get and is there possibility to download more as it says 40 on the programs info on the Mac Store, as i intend to compose on it but with only 40 instruments it's not really worth it.
So i was just wondering whether it let you download more for free.
Thanks for reading
~Matt

Yes: I too am interested in the software instruments available in Logic Pro: one has to be a bit wary of the jam packs because there don't seem to be many solo instruments included. But I looked at the Logic screen in an Apple store the other day, and it worked like GarageBand in
this respect: you created a new track choosing the software instrument option and a whole lot of instruments came
up in a column on the right: lots of solo wind instruments, plenty of keyboards and guitars of course and not very many solo strings, only one violin, in the world music subsection under Irish fiddle. Yehudi Menuhin
where are you when we need you?
What I've been trying to find out is which part of the purchase does this long list of software instruments arrive with, because it's basically the only reason
I'm interested - I get on fine with gb but it
Just hasn't got enough instruments, and as I say the jam packs don't seem
to resolve this ? Or do they? Could someone please help
me with this?

Streaming Logic Live with another studio

Hey,
I am constantly doing minor tweaks after I finish a Major mix and it would be handy if i could find a possible way to stream my logic live with another studio. This was not only could the person hear exactly what I am doing but also have the ability to control it. I have tried Virtual Glass but that is having a lot of issues and does not seem to work and Teamviewer is great for controlling but sound does not work and when you run major programs like Logic 9 Pro it just crashs at the other end.
So if anyone else knows a way possible for me to stream my Logic Pro 9 arrangement with someone else please let me know!
Thank you

The only way I could see this working is using the same Logic project on both location and lock the remote system. You could experiment with Euphonix Eucon ethernet protocol to remote control the slave, but you would need their interface (MC control / Mix). I know that Steinberg have (or had) their platform remotely working and users to exchange files and sync. both machines. May be someone else has some better ideas...

Create a logical column with more than one data source

I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
What I want to do is the union of 2 physical tables in one logical table.
For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
What I've tried is dragging the datasources I need onto the logical column.
However this isn't working because it only retrieves the data from the first data source.

Hi!
I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
Bye.
Message was edited by:
user578388

You can't use this version of the application "logic pro" with this version of os x

After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
'you can't use this version of the application "logic pro" with this version of os x'

Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).

Using Logic Pro with Reason 3.0

I am trying to use logic Pro with reason 3.0. I want to be able to sync them together to use redrum within reason as my drum machine. I am using a MOTU 828 mk II audio interface with 8 in's and 8 out's.
When I start logic first and the reason I am not hearing any sound from reason. I can see the meters move in the mixer of reason but I hear nothing.
From the standard documentation that comes with Logic all I can figure out is that rewire is there to sync any other rewire program so that can run side by side of one sequences transport controls.
I want to be able to hear audio from both my arrangement in Logic and in Reason at the same time in the same song in sync.
Can someone please tell me firstly if this is possible and if so how can I implement this kind of setup.
Thanks in Advance.
amerretz

Common problem. LP doesn't rewire 'out of the box'.
There are two ways to do this (well, more, but I'll tell you 2)
1 (Easy Way):
Restart Mac (Just to be sure things are sorted, not everytime)
Launch Logic
Launch Reason
Arrange Window
Choose a Channel> Pan Left
Go to the Middle section of the Parameters on the Left
With the Channel pop up menu, select Rewire> RWMix L
Repeat for the Right and away you go.
2 (More Advanced)
Environment Window
In the Middle section of the parameters on the Left select Create
Name it Rewire
Under that windows "New" pull down (Top Left), pull down to Audio Object
In the "Channel" pop up (Left, bottom section) select>Rewire (Left, right, 3,4... What ever you want.
Double Click the Audio Object to expand it
Pan Left or right, or whatever you need.
Rename if you wish
Do the same for the other stereo sideNow's the fun part. Assign these stereo pairs to a bus (above the fader, the default is "Out 1-2")
Go to the Mixer window
Double click the Bus you assigned, this puts it in the arrange window
Arrange window
Name the Bus "Rewire" or "ReDrum" or something great like that.
Now you can use it like a stereo pair (which I wish Logic had) for automation and effects and such.

I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

Logic Pro 7.2.1 Update is not recognizing my 7.2.0 app. HELP!

grrrrr, this is so frustrating!
Logic Pro 7.2.1 Update is not recognizing my 7.2.0 app. Any ideas?

To prevent cheating, the updater checks the receipts
first — receipts files look like regular package
files, but they're actually a list of pointers to the
files installed from that package, together with
their attributes: location, checksums, owner,
permissions, and so on... That's how the repair
permissions function works.
If you messed with your receipts folder, you may be
out of luck: in this case, re-installing everything
will rebuild the receipts and the updating
should take place.
Yet another option would be to use Pacifist:
http://www.charlessoft.com/
• it allows the user to create receipts for [.pkg]
packages
• it can be used to force installation of any file
from a given package
Be aware that Pacifist doesn't run any of the
pre-install, post-install, pre-upgrade, or
post-upgrade scripts, doesn't check already existing
receipts, and doesn't alter the permissions
afterwards, so you'd better know what you're doing...
nice illustration on the repair permissions....

Logic Pro has detected a MIDI timeout.

"Logic Pro has detected a MIDI timeout. Please restart your computer, then relaunch Logic Pro.
If the problem persists, update the drivers of all connected MIDI devices (including audio drivers with MIDI functionality) to the latest version. For instructions on removing older drivers, consult the manufacturers' documentation."
This is what ive been getting since i updated ato Logic 9.1.7 yesterday and also installed the latest Protools DIGI 02 Drivers for OSX lionthis weekend in ATL and WEST palm Beach thanks much....

i dont have any digi or mbox drivers in my system, but have the same problem. song ist frozen .. anybody have a suportive link???

Audio input, Logic Pro with Lion

When I change my Audio input, I have to reboot my computer for the change to work. I am using Logic Pro with Lion on a macbook Pro. I am switching between a Mbox Mini3 and a Blue Yeti Mic. Is this normal?

What happens if you disable, then enable "software monitoring"?
I would imagine it has more to do with Avid's Core Audio drivers for the MBox.
Also, this is a personal preference: I never have the Mac using the pro-audio interfaces, only Logic.
In Audio-Midi Setup and in System Preferences/Sound I only have "Built-In Audio" selected, my recording interface is for use with Logic only.

My macbook pro with OS x Lion will not drag and drop files from finder or iTunes

My macbook pro with OS x Lion will not drag and drop files from finder or iTunes. Can anyone help?

Hi, I just have same problem.. I can't drag and drop file /folder.. please help.. I can drag the file/folder and move it , but I can't drop it after move it please help...!!!
It is happen just after I re-start my computer.. I tried to repair and anything but just don't work. Actually the old style one finger double tab and lock is much better rather the 3 fingers.
Please help to fix the drag and drop for file/folder/itunes.

Just bought pro with new os installed - will not let me run install disk for lexmark printer

just bought pro with new os installed - will not let me run install disk for lexmark printer?

Is that disc for Mac systems or Windows ?
I suggest you visit Lexmark web site and download and install drivers for your exact printer manually.

You can't use this version of the application Logic Pro with this version of Mac OS X.

You can't use this version of the application Logic Pro with this version of Mac OS X. why am i getting this message after upgrading to lion

<Bump>
See this thread.
https://discussions.apple.com/message/15700842#15700842
and this one.
https://discussions.apple.com/message/15700505#15700505
pancenter-

When i try to open my projekt in logic pro x it say audio files not found?

when i try to open up a projekt in logic pro x it say audio files not found why is this heppends?

This error typically means the audio files you used in this project are no longer found in their original location.. (did you move or delete them?) or you have renamed the audio files..... or they were located on an external HD etcand that drive or disk is no longer available.... because its not plugged in.

TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps.

Logic Pro 8 with Triton Studio MIDI Data Not Sending

Similar Messages

Maybe you are looking for