Logic Pro 8 won't keep setup preferences on a particular project...

I have about 13 songs (projects) that work fine, the 14th one keeps the data but won't recall my view preferences i.e. big bar display, Global tracks collapsed, Track header configuration etc. Any suggestions? BTW, these were all created in Logic Express 8 and open fine in the upgrade. every time I change anything visual, it doesen't stick when the project is reopened...

No idea, too little information to guess.
Just recover what you can - if you'd recorded audio files, they should be on your disk, so just reimport them if you have a song version without them...

Similar Messages

Can anyone answer why in logic pro X I keep getting a window popping up that says Directory not found, result code= -120, followed by another window saying, Fade update failed, (error -120)?

Can anyone answer, why in Logic Pro X I keep on getting a window popping up saying, Directory not found, result code = -120. Followed by another window saying, Fade update failed, (error -120)?
I am running the latest version 10.0.5 through a Macbook Pro that has just been upgraded to 16GB Ram and a 960GB SSD which has made it as fast as ****. I upgraded because I was experiencing problems before and it was suggested that I didn't have enough Ram?
I am using a Focusrite scarlett 2i4 and an Alesis Q61 midi controller. Weirdly, just trying to put a bass line down on a track using the Alesis, the bass sound goes out of tune with the track during recording only. This is very frustrating! I surely can't be the only one experiencing this?
Many thanks
Rob.

Hi
Time lost could be a problem, but.....
Sadly, I don't think that there are any Apple docs relating to networked storgae issues with Logic. Other than a 'school' or 'business' setup, NAS/OD/AD setups are not usual circumstances for audio.
If the issue is one of data backup & security, it may be enough to automatically backup the students local work folders to the NAS.
If the issue is one of the Users being able to work from any Mac and pick up their files from the server, you are not likely to resolve this problem, without copying the files to the Local Mac.
CCT

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.
I even pulled the dmg file into the Logic Studio folder in my applications directory and it still does not recognize it. What do I do now?

Niel: Thanks.
For others benefit, here is what happened.
I had installed Logic Studio 9.1 some time ago.......not knowing what all the programs were nor what they did, I created a "Logic Studio" subfolder in my applications folder and put all Logic Studio programs into it so I'd know where they were and could review each at my leisure over time.
My assumption now is that when the updater looks for the Logic Pro program, it looks only in the applications folder. It seems lame that it would not also look in the subfolders of the applications folder, but that apparently IS the way it works. Because my Logic Pro program was located in the "Logic Studio" subfolder, the updater just didn't see it..hence the error message I received when I tried to update.
Solution: I moved all the Logic Studio programs out of the subfolder and now they reside in the applications folder. Ran the 9.1.5 updater and it worked like a charm.

How do you delete a device in Logic Pro X Control Surfaces Setup?

How do you delete a device in Logic Pro X > Control Surfaces > Setup?

Go here:
http://help.apple.com/logicpro/mac/10/
Search on Bounce

Help Logic Pro X deleting controller setup

how do i delete in Logic Pro X a mixer setup?
i chose by mistake a wrong controller out now i cant delete it and when i want to put the right one in it says the controller is already in the list.
Right Click > Delete... Doesnt Work
Please Help

LPX resides after instal in the Application folder and should also be available in the Dock. If this is not the case then something has gone wrong during the download, you'll have to try again or contact Apple if the problem persists!
Have a nice day!

Logic Pro won't open a Logic arrangement created in Logic Pro Educational

Anyone experiencing this unusual problem. I am running a fully registered copy of Logic Pro on my MacBookPro. My client is using Logic Pro Educational copy, which expires in a few weeks from now. I have tried to open his arrangement/song files on my system. My Logic Pro won't even recognise what kind of file it is. Anyone know why this is happening? Very, very annoying when this is my line of work and income. If it's a security issue, then it should be the other way around. He shouldn't be able to open my files, hence me paying £700 for my licience. Any advice from anyone would be most helpful. I know someone will probably say...'well get your client to buy a full copy of Logic Pro' ... But it still won't solve this problem in accessing this work. Sometimes Apple...arghhhh!

Thanks for your response. We actually tried it with another user who uses an educational copy. It worked straight away without any problems on his system. 'Corrupt file' is the error I'm getting though, so you're right there. The only thing I can think of is I'm using a MacBookPro and they are using the older Macs. Could it be a strange Intel problem? Very weird. Would love to get to the bottom of this. I am going to try loading it up on my friend's G5 to see if this is the case.
Thanks.
Nick.

64-bit logic pro won't open. Dyld error message

I am trying to open the 64-bit version of logic pro 9.1.1 but it keeps crashing when trying to open. I can't work out why it won't open but It gives the following error in the Problem Report if anyone can help me out here:
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AEProfiling.framework/Versions/A/AEProfiling
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: no suitable image found. Did find:
/Applications/Logic Pro.app/Contents/MacOS/../Frameworks/AEProfiling.framework/Versions/A/AEProfili ng: mach-o, but wrong architecture
/Applications/Logic Pro.app/Contents/MacOS/../Frameworks/AEProfiling.framework/Versions/A/AEProfili ng: mach-o, but wrong architecture

Hmm, very strange, never seen this message before. Have you tried going into Disk Utility and running a "Repair Disk Permissions" on your Macintosh HD? Can't guarantee it will fix the problem, but worth a try.. If you get really stuck, the simplest thing to do is just to uninstall Logic and then reinstall it, apply updates etc.. and try 64 bit again.
Dan.

Logic pro won't install on macbook pro

I have Logic Studio 9.1.5 working on my iMac i7 under OS X 6.8. It is an upgrade of an upgrade, etc going back to V 5.5. I have the original Emagic key from Logic 5.5. My recollection is that I had to use this to install the Logic Studio upgrade to get Logic Pro 8, but that when I upgraded to V9, the key was not necessary.
I'll be visiting some remote sites for recording later this fall, and decided to move Logic to my MacBook Pro for the trip. It came with Lion. I installed the minimal setup from the Logic Studio package to get Logic Pro 9 on the MBP. It asked me for the serial number and to insert the EMagic key at the start of the install process. Once installed, it would not launch under Lion so I installed the 9.1.5 update. When I tried to launch after this update, Logic started up, but I was asked for the serial number and Emagic key again. This time, it reported that my key is not elegible for this upgrade. Makes no sense, given I had this running with no probllem on the iMac.
Have there been any other steps required to install under Lion? Is there anything else anyone can suggest to look into?

Samuel, this won't help you, but it may help some others.
I had CS2 installed on my good old TiBook 400MHz, and it worked fine there. When I got my new MBP C2D 2.33 yesterday, I followed the instructions for connecting via FireWire, and after 2 hours, everything copied over just fine. So far, everything works fine too, which is really amazing to me, including the Adobe CS2 applications.
I did make sure that my old TiBook was up-to-date, and ran Mac Janitor on it, and fixed permissions. That may have made the difference.
The only things which don't run now are the old OS9 applications, and Final Cut Express 3.0 (but there is a work-around using the esc key).
Hope this is encouraging to someone who is thinking about gettig a MBP C2D.

Logic Pro won't start anymore

It's the latest Logic Pro 9.1.8
If i try to open any project I see the GUI for about three seconds but it's frozen. Then Logic crashes. If i open Logic without any project or with the audio engine disabled or with all AUs disabled makes no difference. It still crashes right on startup. I tried trashing the preferences, I even did a reinstall of Logic, but i had no success. I have no idea what to do next and it already cost me a full day of work.
Any advice is very appreciated!

maybe i should add that i of course tried to fix the permissions without success.
another thing i tried is starting Logic from a dummy user and it seems to work from that account. so could reimporting my user account from my time machine backup fix this or would it just reimport the problem?

Logic Pro X - Optimal Hardware setup

I am currently running Logic Pro X on an early 2011 MBP 17 with an EiE Pro and Akai MPK49. I am looking move this setup to a desktop environment. Looking at the iMac versus the New Mac Pro. From what I can tell, my MBP(16G RAM) handles it pretty well which indicates that I don't really need the MP (maybe?). Since I am fairly new to Digital Audio (about a year in; hip hop/techno creation/mixing/production), I was wondering if there's anything that I'm not considering. Any thoughts? What are the setups that are working for you? Not made of money, but price is not a deciding factor just looking to get the right setup to suit my needs and allow for growth.

A set of quality speakers and earphones and you should be ready to go, I think.
Cheers!

Logic pro won't start

I purchased Pro through App Store. When I try to start the program a dialogue box comes up saying: "Logic is automatically downloading an essential collection of instruments and settings...". It downloads, then shuts down. Everytime I try to open the program the process repeats. What do I do?

Not sure if this will help, as it may not be related to what you're experiencing...
But in the past, when Logic wouldn't start. it was always recommended to trash the Logic preferences, and then re-launch the program.
Logic preferences are located in user > LIbrary > Preferences > com.apple.logic.pro.plist
drag that file to your desktop, and try again. Hope that helps...

Grrrrr Logic Pro won't update & What is up with my Tape Delay!!!!!

Right, i'm finding posting on this Forum intensely annoying already!!!
Anyway, can anyone tell me why when i try and update from Logic Pro 7.1 to 7.1.1 it won't let me do it? .....i download it....unstuff it .....and when i click to launch it's says it doesn't recognizea valid version of Logic Pro....yet updating to 7.1 was no problem.
Also, my Tape Delay will not delay consistently ....as the song position indicator passes a region with a tape delay insert ....there's no delay ...then suddenly it kicks in ...out of time/sync with the rest of the song .....it's driving me up the ******* wall!
no seems to have the same problem .....surely its not processing power although have realised that Apple did not make Logic to run on a normal or dual G4 which i'm currently running

the other thing re your upgrade problem is: what exactly is the error message? is it totally telling you that it cannot find a logic to upgrade, period? or is it saying that it has found a more recent version already installed? if the latter, you can ignore the error message and just go ahead and install.. the error message is bogus.
if not.. then I'm not sure what to suggest. all I know is that the app has to be left as is, and where it is, not even so much as put inside a little folder within the apps folder, which some people do when organising their apps.
I had this with a friend who was freaking out at the updater not working.. turns out he'd renamed the app 'Logic Pro 7.1', as he was accustomed to adding the version number to app icons since back on OS9. changed it back to Logic Pro and it went fine.
another thing to do is tr repairing your permissions.. which I presume you have been doing religiously after every software install like a good UNIX boy?

HT4561 I have an iMac (2.66Ghz Intel Core 2 Duo) and recently updated to OSX10.6.8. At first things worked as before, but suddenly a bunch of applications are not working; including videos wont play in any browser, plus Skype and Logic Pro won't work

Recently updated to osx10.6.8. Was fine at first, but now have problems with various applications freezing/hanging.
These include Skype and Logic Pro.
In addition, cannot play videos (including YouTube and BBC) on Firefox (my usual browser), Safari or Chrome.
Application becomes frozen, and I eventually get an 'unresponsive script' message.
With Firefox I have tried clearing the cache. My Flash is upto date.
These are all the apps I use everyday, and this is driving me crazy. Can't seem to find answers on line. Very grateful for any help or advice.

Please download this app ... etrecheck, run it, copy or paste the results and post them back to us here.
From that we may be able to see more background to your problem. Be assured, it is safe.
Etresoft: EtreCheck

Logic pro won't load plug-ins

Hey!
I know that there are several discussions about this, but i think this problem that i've got is quite unique.
I am using Mountain Lion on a Macbook Pro with Logic pro 9.
I was using the following plug-ins:
*Sausage fattener
*Massive
*Sylenth1
*Nexus
The problem here is that yesterday, i shut down my computer, when i woke up and started Logic, it was saying:
Logic pro: Plug-in "Nexus" not available.
Logic pro: Plug-in "Sylenth1" not available.
So i restarted the computer and now it has added:
Logic pro: Plug-in "Sausage fattener" not available.
Massive still works though.
I checked the vst folders and everything, deleted it and reinstalled, restarted my computer but NOTHING works.
Do anyone have a clue what to do? Been googeling all day..
Cheers!

Those are all 32bit plugins...
So start up Logic Pro in 32bit mode and see if that fixes things...
Resolution
To switch Logic between 32- and 64-bit mode:
Quit Logic Pro, if it is running.
Navigate to and select the Logic Pro application in the Applications folder.
Choose File, then Get Info.
Select the "Open in 32-bit mode" checkbox to run Logic Pro in 32-bit mode. Deselect the checkbox to run Logic Pro in 64-bit mode.
My guess is you changed modes..
Note: The 32bit plugins will also show up in 64bit mode under the 32bit plugin area of the drop down menu... (and then they use the 32bit to 64bit bridge program automatically) so you might need to just run LP in 32bit mode and then again in 64bit mode to fully revalidate them again..

Can I delete logic pro 9 and keep all the loops for logic pro X

I am running out of space on my computer and I want to delete as much as I can. I need to know if i delete logic pro 9 will i lose all apple loops for logic pro X.

This is not the right forum for your question.
Re-post the question here.
Russ

Logic Pro 8 won't keep setup preferences on a particular project...

Similar Messages

Maybe you are looking for