Logic pro 9.1.8 won't upgrade to logic 9.0.2

I have ML that is up to date and logic studio 9.1.8. When I try to run 9.1.8 (1700.67) (64-bit) I get to a splash screen that says "Searching for Audio Unit plug-ins (Apple:AUNetReceive).....and I have the spinning beachball of the death. I have to use force quit the app.
I downloaded the 9.0.2 update and the installer tells me that I dont need the update.
Anything going on here?
I can't open or use logic 9
I have logic studio installed if this helps.

Sorry to state the obvious (?) but you are not Updating/Upgrading.
You are DOWN grading if you are going from 9.1.8 to 9.0.2
If you want to downgrade, likely you will need to ERASE, and reinstall Logic.
Treatment

Similar Messages

Logic Pro 9.0.2 won't upgrade to 9.1

I've downloaded and tried to upgrade 3 times. The install says all good but it's not. This is crazy or maybe I am. Someone please tell me what I'm doing wrong. As you see I'm not real new to this. I have a version One manual. This is embarrasing. I did restart each time and more.
Thanks

Again, lots of threads on this.
In short, don't rename or move the application, otherwise software update won't recognise it.
Put it back to where it should be, and call it what it should be, and software update will see it.

Nelson May logic pro 9.1.8 won't upgrade to logic 9.0.2 - any takers

I have had this post sitting on Apple's discussion forums for 2 weeks now and don't have an answer I hope someone can help.
I have ML that is up to date and logic studio 9.1.8. When I try to run 9.1.8 (1700.67) (64-bit) I get to a splash screen that says "Searching for Audio Unit plug-ins (Apple:AUNetReceive).....and I have the spinning beachball of the death. I have to use force quit the app.
I downloaded the 9.0.2 update and the installer tells me that I dont need the update.
Anything going on here?
I have logic studio installed if this helps.
Mac Pro, OS X Mountain Lion (10.8.3), early 2009 8 core 2.4Ghz processors
MBP 2.4GHz 4MB RAM, 30"cine, MAC PRO 2.6 8 core 6GB RAM, Mbox, Neumann TLM-103, FCP HD 7. Pro Tools 8, Adobe Creative Suite, Reason 3.0, Macromedia Studio, ProAnimator, HVX200 with Firestore v4.0

Logic Pro 9.0.2 is older than Logic Pro 9.1.8, that wouldn't work as an "update". You should however update to 10.8.4 or later. BUt for your issue you might want to try to delete the "com.apple.audiounits.cache" inside ~/Library/Caches.

HT1338 My desktop Pro won't upgrade from it's current format of 10.5.8 it just states up to date software?

My desktop Pro won't upgrade from it's current format of 10.5.8 it just states up to date software? Please advise my course of action!

The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

HT201177 Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
This will allow you to simply type “airport” in the terminal window to execute the command.
Type airport –s
This will display all the networks in your area and what channel they are broadcasting on.
3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
4.) Boot your Mac into safe mode by holding down the shift key while booting.
5.) Open System Preferences and Click on Network.
6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
7.) Create a new location by clicking the + and give it a new name.
8.) Delete the old location by clicking on the old locations name and click the – to remove.
9.) Reboot
10.) Open System Preference and click on Network.
11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
12.) Drag Airport to the top of the list of devices then click Ok.
Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
13.) Click on Advanced under Network.
14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
16.) Click on the drop down for Configure IPv6 and change it to Off.
17.) Next click on the DNS tab at the top.
18.) Click the + to add a DNS Record.
To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
Then Type cat /etc/resolv.conf
(There is a space between cat and /. Without it you’ll get no such file or directory.)
This should return two addresses. Your ISP’s DNS Servers.
19.) Add both records to the DNS and click Ok.
20.) Click Ok then under Network Click Ok.
21.) Reboot router then Mac
22.) Fixed my connection issue
The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
Let me know if this helps or if you have any questions.
Best of luck.
Message was edited by: erockdabass
Message was edited by: erockdabass

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?

My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
Disk Information:
          APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
          [System] com.hp.devicemonitor.plist 3rd-Party support link
          [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Dropbox
          AdobeResourceSynchronizer
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
          Adblock Plus: Version: 1.7.4.1135
          Ebay Shopping Assistant: Version: 1.1
          Amazon Shopping Assistant: Version: 1.1
          Slick Savings: Version: 1.0
          Searchme: Version: 1.3
          AdBlock: Version: 2.6.18
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              29%          Safari
              16%          com.apple.WebKit.WebContent
               5%          PluginProcess
               4%          WindowServer
               3%          com.apple.WebKit.Networking
Top Processes by Memory:
          289 MB          Safari
          131 MB          com.apple.IconServicesAgent
          82 MB          com.apple.WebKit.WebContent
          82 MB          mds_stores
          66 MB          Finder
Virtual Memory Information:
          721 MB          Free RAM
          1.62 GB          Active RAM
          1.05 GB          Inactive RAM
          636 MB          Wired RAM
          1.18 GB          Page-ins
          0 B          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows

I've got a Mac Pro Dual Quad Core won't boot OS/X, but plays fine with Linux/Windows. I've tried all of the following initial tests as suggested on forums:
-Ram swaps
-Alternating video card in PCIe slots
-Trying alternate video card
-resetting pram and smc
-Multiple tests with memtest86+ over 26hrs and no failed ram
-Multiple tests (8-12 cycles) with apple HW diagnostics and no problems
-Firmware is approved firmware for early 2008 model...no new updates.
Gentoo livecd works fine and I even installed to hard drive and it boots fine with it. In addition to above tests I also ran a linux stress test putting all 8 cores at a load of 22 for 2.5hrs with no problems.
Memtest86+ for 24hrs+ yields no problems.
Where problems occur:
Booting off hard drive, DVD or firewire yields an immediate curtain of death and booting off a new snow leopard DVD dies about 25% into the install.
Looking at error log and a quick dmesg shows "Package 0 didn't get an HPET" and complains about AppleIntelCPUPowerManagement.kext. Google turns up illegal uses of this, so doesn't apply to my use case.
I'm a bit stumped since all was working well until one day it was non-stop curtains of death and can't get them to go away.
A logic board replacement at $1100 is not a feasible option for something that works on linux and windows, but not OS/X, is a bit disappointing and somewhat surprising.
Thanks for your help and advice.
Regards,
Marcos

Someone here once thought they knew EFI and Open Firmware a little, and used some commands from OF library that an Intel EFI Apple system didn't like. New logicboard.
Of course to run or boot OS X and see video you need EFI based card. The presence of some PC cards can block OS X from booting.
The fact you get part way through SL DVD, pull all the drives, put in a new drive and format it from SL DVD.
Most of the things you tried are what are more common with PC hardware. Including where people have tried and failed to install OS X on unsupported hardware.
I suppose it is possible something tried and failed to modify the Mac's firmware.
If you have Windows running, and you have WD drives, WD just posted new Lifeguard utility which is what I use to do a good job of stripping a drive down and recertify it for reuse, works wonders. Maybe same for other makes with vendor utility.

Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9?

Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9? My former PC ran on Windows XP and this new PC runs on Windows 7. I don't want to shell out another $449 when Acrobat Pro 9 worked fine for me.

You might be able to install Acrobat 6 for this purpose, but you probably won't have to. When you install Acrobat 9 Upgrade it should (if I remember right) ask for the serial number of your "qualifying" product and at that point you put in the Acrobat 6 serial.

My Macbook Pro starts beeping and won't turn on. Any ideas?

I recently purchased a Macbook Pro. It now won't turn on even though the light goes on. It also makes a beeping noise that won't stop until I force it to shut down. Does anyone have any ideas?

Normally - one would think that your RAM went bad if it's 3 beeps.
It could also mean that macbook can not find any valid os installed.
Have you recently upgraded your RAM? if so - take them out and install the old one back and see what happens.
if however, you never upgraded your RAM - best suggestion is to take it to Apple and have them take a look at it.

I was running remote desktop on my old mac pro running 10.4.11. Upgraded to new pro running 10.6.7 Can I get remote desktop to run on new computer?

I was running remote desktop on my old mac pro running 10.4.11 Just upgraded to new pro running 10.6.7 Can I get my previous remote desktop to
run on new computer?
Thanks

Are you talking Apple's Remote Desktop software, or Microsoft's?

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

Dear Katty,
Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
https://discussions.apple.com/thread/3374419?start=0&tstart=0
https://discussions.apple.com/message/16628399#16628399
Do you have an idea of how can I solve this problem?
Thank you very much again.
Best regards,
Alfonso

I had one of your technicians re-install Acrobat Pro and it still won't open. My technician was Rajat and he was reading from a manual. He did not appear to be competent. He told the case has to be escalated

I had a technician, Rajat, from a Adobe re-install Acrobat Pro. It still won't open. He said the case has to be elevated. How do I get help from someone in the United States?

Not one of my technicians. We are just fellow users of the product.
But if you start from the top and explain your problem we have a fair track record of helping. Some questions for you
- what version of Mac or Windows
- what version of Acrobat Pro
- what exactly happens when you try to open Acrobat Pro (error messages in full please)
- whether it ever worked and what changed?

ITunes won't upgrade to10.5. Error message "There is a problem with the Windows installer package. Contact the package vendor". I need help.

iTunes won't upgrade to10.5. I'm on 10.1.17.
When installing 10.5 it terminates with an error message "There is a problem with the Windows installer package. Contact the package vendor".
It does not provide an error code or details/description to further troubleshoot. As a result I can't upgrade my Apple devices to leverage the cloud.
Any smarts out there who could help?
Using PC Win-7 w/IE 7 (should that matter)
Thanks much

I know there's a million threads like this, but I thought I'd record my experience. I, too, was having the original poster's error when I tried to update iTunes on Windows XP. I think I was stuck on 10.
I solved it by un-installing iTunes and every other Apple app. I discovered that Apple Software Update would not un-install as its MSI file could not be found. I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs. Google "kb290301" for a Microsoft page that includes a download link for it. After that, I was able to install a fresh copy of iTunes 10.5.2.
I'm not sure why this app's folder and MSI were missing from my computer. I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS6. Well, InDesign is the only one that works and I have a ton of work due! I don't have a serial number for Photoshop or Illustrator except for CS3, and they don't work. InDesign gave me no problems. Illustrator says it can't work on this machine. Photoshop needs a serial number. I'm stumped and getting anxious and freaked out. Can anyone help? Adobe Chat is down right now.

if you have a cc subscription, close ps > sign out and then back in to your cc desktop > open ps.
ai cs6 requires:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X v10.8 and v10.9 when installed on Intel-based systems.*
2 GB of RAM (8 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024 x 768 display (1280 x 800 recommended) with 16-bit video card

Logic pro 9.1.8 won't upgrade to logic 9.0.2

Similar Messages

Maybe you are looking for