Logic Pro 9.6.1 searching for Audio units

Logic keeps hanging and stops repsonding in 64-bit mode. Same for MainStage. Is there a fix or an issue with Lion. This worked then just stopped working and this problem began. When I re-install and bring it back to 32-Bit no problems. Does anyone know if you can run these pro Apps in 64-Bit with Lion or is this a Lion issue? Never had a problem with Snow leopard. Any help or advice would be greatly appreciated.
If it is that I must run in 32 bit mode then what is the purpose of 64-Bit if you cannot use it?
Thanks to all the fellow users out here!!!

Hi all, went back to Snow Leopard. Lion is not worth the problems and money that you have to keep on spending.
It will make apple the wealthiest business ever.

Similar Messages

Logic 9.1.6 hangs at start-up splashscreen "Searching for Audio Unit plug-ins (Apple:AUSpeechSynthesis) and indicates 64bit when set to 32bit

I have deleted preferences, cleared caches, repaired permissions with Disk Utility and Disk Warrior, rebuilt the directory with Disk Warrior. There is no file on my drive called AUSpeechSynthesis, should there be?

jimodon wrote:
This happened with my MacBook too. LogicExpress9. I read somewhere else that it was caused by MacKeeper?
That's correct, I believe MK has an "optimize" feature that cleans out old and/or unused files... evidently AUSpeechSynthesis is not considered a Mac file or is not in MacKeeper's list of Mac System Files. Not only that... I hear MK deletes some loops and/or instrument files... so BEWARE!

In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)

I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.

How do you export a song in logic pro x. ive tried now for 2 hours to do it and all it gives me and indivial files when i want the whole thing as a project

how do you export a song in logic pro x. ive tried now for 2 hours to do it and all it gives me and indivial files when i want the whole thing as a project

Go here:
http://help.apple.com/logicpro/mac/10/
Search on Bounce

How do I get Logic Pro X to see my USB audio interface Steinberg UR22? It saw it once before but now it doesn't.

How do I get Logic Pro X to see my USB audio interface Steinberg UR22? It saw it once before but now it doesn't. In preferences it doesn't appear as an input device option. Help!

First, go to System Preferences for OS X and verify that the operating system can see it.

I bought logic pro 9 and its asking for serial...what to do?

I bought logic pro 9 and its asking for serial...what to do?

northflower wrote:
why does it matter if someone else got it? if i bought it am i not allowed to use it becausesomeone else bought it before me?
I'm just saying that there is/was another copy of Logic on that computer at one time, the app store version does not require a serial however... if a previous version was on the machine I think even the app store version will ask for a serial... is that what's happening?

Does Logic Pro X include replacement functionality for Compressor, Soundtrack Pro and Waveburner from Logic Studio 9?

Does Logic Pro X include replacement functionality for Compressor, Soundtrack Pro and Waveburner from Logic Studio 9?

No.. You can buy the Compressor (along with Mainstage) via the App Store as a separate download but STP and Waveburner are discontinued products. Some of STP's functionality can now be found in Final Cut Pro X...
Note: Mainstage, Compressor, Waveburner and STP were part of the full version of Logic Studio 2.0 (which also included Logic Pro 9 ) and sold for $999 compared to Logic Pro X which retails at $200...
The Apple loops/Jam packs that came as part of Logic Studio 2.0 now come free with Logic Pro X (and did so with the Appe store version of Logic Pro 9) .. as part of the additional downlaod

TS1398 My Macbook Pro has suddenly stopped searching for my Wifi Router automatically

I am new to Apple mac.
My Macbook Pro has suddenly stopped searching for my Wifi Router automatically.
I now have to go into System Settings and search for it manually.
Everything has been fine, this has happened suddenly.
Is there a Setting that I am missing.
Everything is set to Automatic in the Network tab and Wifi is first in the list on the left pane of the network dialog box.
Help please - Thanks Jeff George

This is the iPod touch forum. I have asked the moderators to move you post to the MacBook Pro forum.
https://discussions.apple.com/community/notebooks/macbook_pro

Analog plugins for audio units?

I have recently starting mixing on logic due to the need for recall (client adjustments). I used to mix thru my soundtracs mrx console & got a fantastic sound that was very warm. The problem i'm getting which has been debated many times before, is the digital cleaness of software which definately lacks warmth. Can anyone tell me the best analog modelling plugins for audio units? I've heard good things about the psp vintage warmer....how good is it & what else there?
G5 DP1.8 Mac OS X (10.4.6) LP7.1.1 + MOTU 2408 MRK3 + REASON3 + WAVES + VARIOUS

I´ve found that if I leave my Souncraft 1600 channels at unity gain and use the automation in Logic to mix I get the best of both: recall and warm.... The problem in digital is the summing...
just try it, it´s really easy: make a mix in the box and bounce it. after that change the outputs of the tracks from stereo1/2 to all the outputs you have in your sound card with the channels in the analog console at unity gain. Record the mix. even an 8 channel decent sound card will sound better IMO. I disceverd this years ago when using an AW8 in 16bit and aginst all logic it sounded better... with my Multiface was even better ... I still want to try my brand new Fireface800 with this trick. just compare both mixes and tell us what you´ve found.
...besides that you can use your mixer´s eq and analog stuff if you like...
regards

No logical system group can be determined for administrative unit &1

Dear GTS gurus,
In Risk Management module when we execute the report "Analyze LTVD Request Relevance of Products" (/SAPSLL/PRE_VD_OPT_ANL_PROD) we sometimes get the error message:
No logical system group can be determined for administrative unit *******
Now I did some googling and found the following website: consolut - /SAPSLL/PRE_VDEC139 - No logical system group can be determined for administrative unit &amp;1 - /SAPSLL/…
It says that in customizing item "Define Administrative Unit Attributes" some assignment is missing but I was not able to figure out what exactly. I compared it with Administrative Units which did not not issue any error messages and customizing looks good to me.
Can you share your insights on this topic?
Best Regards
Greg

Hello Gregor,
Under the Admin Unit attributes, you must have a Plant Group defined.
Is that Plant Group assigned to a logical system ?
(IMG: General Settings -> Organizational Structure -> Define Cross-Plant evaluation (or Define Plant-based BOM evaluation)
By the way, the site you have found is one of the many sites out there that lists the messages available in a SAP system. The same information is available within GTS (Transaction SE91).
Regards.
Mouaz BEN REDJEB

Satellite Pro A40: Cannot play musik - searching for audio controller

Hi
I have a satellite pro A40, my DVD rom drive wont work anymore and I keep getting a message about searching for hardware for a multimedia audio controller!!!
Cant play music or anything anymore.
Can i download these drivers safely?
Don't want to clog up computer with random downloads from internet.
If anyone can help me I would eternally grateful

hi satproa40,
you can safely download all drivers for your satellite from: [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
the "multimedia audio controller" means the sound driver,
if previously installed it may help to delete this item in the device manager and let it reinstall by system.
same procedure with the dvd-rom, if this wont work try to exchange the drive...

Logic Pro 8 and Delta 1010 random audio stuttering

Since installing Logic Pro 8, I have two problems which I suspect may be related:
1. Launching Logic will sometimes freeze my Mac and bring up that familiar screen that says I must immediately restart. This seems random, happening maybe one time out of 7 or 8.
 2. The other problem is that launching Logic 8 sometimes results in apparent misbehavior by my PCI audio card, a Delta 1010. In such cases, I will immediately hear something that sounds like very loud white noise coming out of the audio interface and into my mixer, but with a rapid stutter (confirmed by the VU meters on the Delta control panel, which vibrate like they're having a seizure). Nothing seems to stop the noise, except quitting Logic and restarting the Mac. This misbehavior seems quite random and there's nothing I've been able to do to track it down or make it repeatable -- all I can do is quit Logic, restart, and hope that this time it works. Fortunately, if I can finally get Logic 8 launched without the noise factor, it runs fine and virtually never crashes.
Anyone have any similar problem or ideas about the cause? I'm thinking about replacing the Delta 1010 with a new Firewire audio interface, in anticipation of buying a new Mac later this year. But I don't want to do it now if it's not the 1010's fault.
(Details: I am using the latest driver for the Delta 1010, downloaded from M-Audio's web site; the latest version of Logic 8 (8.0.1); and Mac OSX 10.4.11. I've got this all running on an older Mac, a G4 Dual 1.25 with 2 GIGS Ram. I've got the Delta 1010 selected as the default input and output in Audio MIDI setup, using the Mac built-in output only for the System Output. None of these issues were happening with Logic 7, and I haven't changed anything since then, except for installing Logic 8 and gradual Tiger upgrades. I also seem to have no problems using the Delta 1010 with Final Cut Pro. I suppose the possibilities are: incompatibility with Logic 8 and some other software, the Delta 1010 card is going bad, an issue with other connected peripherals (USB hub, Firewire Hub, Edirol UM-550), bad ram... or something else?)

Hi,
There are two things to bear in mind here.
1) In my experience, it takes a little longer for the driver to kick in after boot up, so wait a minute before launching Logic.
2) I recently reinstalled the 10.4.10 driver on my friend's Mac (same config as yours) and it now works as it should.
Best Wishes

Logic Pro 8 and nio 2/4 Audio Interface microphone input

I am new to using macs and have purchased a mac mini. I have fully installed Logic Pro and have nio 2/4 as my input for music via a microphone. Logic finds nio compatable but I cannot however get Logic to recognise the microphone as an input for recording. Logic does not also generate the microphones sounds ie when spoken into in real time. I know the solution is probably very simple but I haven't got a clue where to start in changing the settings ie on the mac and on logic. any help would be much appreciated

Open Logic, go to Preferences>Audio>Devices>Core Audio and select the nio as the Core Audio device.
I assume you have the mic plugged in to the nio?
Does it indicate that it gets a signal from the microphone?
The Mac will not 'recognise' the microphone, as it will not recognise anything plugged into the analog inputs of the nio - it will only recognise the nio itself. You have to assign in- and outputs to you tracks in Logic. So if the mic is plugged into input 2, you'll have to select that input on the track you want to record it on.

Logic Pro Corrupt Files? Begging for Help!

Hello all,
I am having a real problem here. Every new file I create in logic pro eventually turns corrupt, including the backup projects automatically generated in the project folder. When I go to open the project file I've been working on, a prompt pops up either saying that the file is unreadable, damaged, unrecognized or even sometimes it says my audio files are in an unreadable 8 bit format () So it seems to be corrupting the audio files as well... Some serious problem is going on. I am running all latest versions of all my software and hardware. Leopard 10.5.5, Logic 8.02 and my MOTU Interface has the latest firmware.
I have tried dumping my preferences in the library, and I even did a full reinstall of Logic, and the problem continues. Is it a hardrive issue? I have verified and repaired disk permissions several times with no problems. I tried to call phone support and was surprised to be treated indifferently and would not be helped unless I consented to an expensive user agreement. I thought my $3,000 computer and $500 software purchase would be adequate enough. I guess not.
Sorry for the rant, this has been most troubling seeing as I have lost a project due to this crazy glitch. So I turn to you, online community! Am I alone is this problem? From online investigation it seems no one has had much of a problem with this. Does anyone have advice for me? Anything will be GREATLY appreciated!!!!!!
BTW, DP projects and Garageband projects seem unaffected, which makes me wonder if it's a Logic Pro issue after all. Oh and I'm running the same Logic Pro software on an older Powerbook G4 w/ Tiger and everything runs fine.

dsermon wrote:
As far as other hardware, it's only the ultralite and a oxygen 61 keyboard
Yes these corrupt files work ok on G4 unless the audio has already been corrupted by my macbook pro
*I will definitely try out all of your suggestions* and see where it leads me. I'm glad other people are experiencing this problem. Well, not glad, but you know what I mean... Just thought I was going crazy.
Elith- does your exported audio come back as garbled audio sometimes? Mine either make a TERRIBLE hiss, garbled, or are not readable at all. Really sad stuff....
Are you connected to the internet via wireless or ethernet cable?
If so disable and see if it makes a difference.
pancenter

Bought logic pro 9.1.7 online for new MBP with mountain Lion, but asked for serial number. Where could I get SN?

How can I get the SN for an online version of Logic Pro bought from AppStore?
Thanks!

good news. The trick is to delete the "logic pro 9" by dragging the App from Finder->Applications to trash bin, and re-doanload and re-install it again. Now it's happily downloading 19GB contents without asking for SN.
Thanks Pancenter for your message. This is is brand-new MBP with Retina display, and I didn't find or delete and reg file for logic. Simply delete the app under installation (not in the launch pad, see above) and re-install. It works for the 2nd try. It could be a SW integration bug.

Logic Pro 9.6.1 searching for Audio units

Similar Messages

Maybe you are looking for