Logic Pro 9: Playhead/Playback/Audio Levels/Logic Pro X Issue, PLEASE HELP!

When I press play within the project, the playhead doesn't move from left to right with the audio like it should. As well as within the mix window, the audio levels are not displayed. However, when I click and hold within the arrange window, everything is fine and working properly, but I'm not going to be holding down the mouse the whole time I'm working on a project.
Does anybody have any sort of advice for me at all?
Also, if I were to buy Logic Pro X, would all of my projects currently running in Logic Pro 9 be able to open up in Logic Pro X? I also have the Waves Mercury Bundle, Vangard and Antares Auto-Tune, would all of those work with Logic Pro X?

Similar Messages

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

Upgraded to lion on my 2009 summer macbook pro, now no memory left. something is screwy ...please help an old lady out..

upgraded to lion on my 2009 summer macbook pro, now no memory left. something is screwy ...please help an old lady out..

By memory, do you mean space on your hard disk?
If so, here is one resource:
Freeing space on your Mac OS X startup disk
Or do you really mean memory - i.e,, RAM?
In any case, what occurs that makes you think your "memory" is gone?
charlie

After upgraded to Mavericks my macBook Pro my Apple TV sound crash each ten seconds. Please help me!

After upgraded to Mavericks my macBook Pro my Apple TV sound crash each ten seconds. Please help me!

Hi Aparana.rahul,
The beeps during the startup of your MacBook Pro indicate that it may need to be serviced. See this article for further information -
OS X Mavericks: If you hear beeps when your computer starts up
http://support.apple.com/kb/PH14206
Note that while the article title says it is for computers running Mac OS X 10.9 Mavericks, the same information applies to other versions.
Thanks for using Apple Support Communities.
Best,
Brett L

Logic Pro unexpectedly quit and now won't open at all please help!!

Hi all,
I have a Macbook Pro, 10.7.5 - just the standard one. I use Logic Studio (Logic Pro 9) and normally it works fine but the other day I tried to bounce a track and I got the beachball of death and the message 'Logic Pro has quit unexpectedly, a version has been saved xxxxx (crashed) etc'. This happened everytime I tried to save or bounce or import, in any session - a blank one, or an old one.
So I did some research and on an apple support page ended up deleting the 'Prokit' thing from my library, and downloading the new one (Prokit update 7 I think). I tried opening Logic again and got this message:
'Logic Pro cannot be opened because of a problem.
Check with the developer to make sure Logic Pro works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
Click Report to see more detailed information and send a report to Apple.'
I gave up a bit at this point, and thought I'd uninstall/delete every trace of Logic from my laptop, including the items in preferences (this was recommended online somewhere). I went through the (lenghty!!) process of reinstalling Logic and all the audio content and extra CDs, and the problem is still exactly the same and I can't open Logic.
Can anyone please help? I'm lost without being able to use Logic every day, any advise would be great!!
And I've also just updated Logic and still no luck.
Thanks,
David

No third party plug-ins, and no I didn't delete the /cs files.
I back up using time machine.
This is the latest crash report:
Process:         Logic Pro [251]
Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier:      com.apple.logic.pro
Version:         9.1.8 (1700.67)
Build Info:      Logic-17006700~1
Code Type:       X86 (Native)
Parent Process: launchd [152]
Date/Time:       2013-05-01 22:29:51.201 +0100
OS Version:      Mac OS X 10.7.5 (11G63)
Report Version: 9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: image not found
Binary Images:
    0x1000 -   0xbeafff com.apple.logic.pro (9.1.8 - 1700.67) <94981650-518B-2288-F07D-F28F27103100> /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
0xe84000 -   0xea2fef com.apple.XSKey (1.0.0 - 52) <71B94F53-15DB-9012-91F2-211F7C2CD790> /Library/Frameworks/XSKey.framework/Versions/A/XSKey
0xeb1000 -   0xee4fe7 com.apple.music.apps.MAAudioUnitSupport (9.1.8 - 233.53) <E8A99468-7726-CCFE-8D26-DDBC9D5E1AC3> /Applications/Logic Pro.app/Contents/Frameworks/MAAudioUnitSupport.framework/Versions/A/MAAudioUnit Support
0xef1000 -   0xf22ff3 com.apple.musicaudiodataservices (1.1 - 251.4) <0265F317-13AB-6CF1-A171-7D5853442E75> /Applications/Logic Pro.app/Contents/Frameworks/MAAssetSharing.framework/Versions/A/MAAssetSharing
0xf31000 -   0xf33fff com.apple.ExceptionHandling (1.5 - 10) <7C514CC4-7951-31CA-AEB3-D4AF49F44AE7> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xf39000 -   0xf97ff3 com.apple.music.apps.MALoopManagement (9.1.8 - 219.66) <0075F2D0-7A48-A362-2D49-4FECA5E9DF8E> /Applications/Logic Pro.app/Contents/Frameworks/MALoopManagement.framework/Versions/A/MALoopManagem ent
0x8fe41000 - 0x8fe73aa7 dyld (195.6 - ???) <3A866A34-4CDD-35A4-B26E-F145B05F3644> /usr/lib/dyld
0x91715000 - 0x919c7ff7 com.apple.AddressBook.framework (6.1.3 - 1091) <B8CC707C-6368-3CDD-BE38-D2335B7CC2DE> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x93efc000 - 0x93f0afff libz.1.dylib (1.2.5 - compatibility 1.0.0) <E73A4025-835C-3F73-9853-B08606E892DB> /usr/lib/libz.1.dylib
0x94942000 - 0x94a23ff7 com.apple.DiscRecording (6.0.4 - 6040.4.1) <08BADDAD-FA79-3872-9387-EEE2A9FAA2F0> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
0x95de5000 - 0x95e49fff com.apple.framework.IOKit (2.0 - ???) <94827954-5906-36C4-819B-24CDAFD85C72> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x96c87000 - 0x96dddfff com.apple.audio.toolbox.AudioToolbox (1.7.3 - 1.7.3) <F09C7075-2C4E-3A4F-A372-95D700125513> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x97e57000 - 0x980dcfe3 com.apple.QuickTime (7.7.1 - 2340) <76E45D49-3D4F-32AB-A411-E52C22FA24C8> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x9b079000 - 0x9b079fff com.apple.Carbon (153 - 153) <63603A0C-723B-3968-B302-EBEEE6A14E97> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9b080000 - 0x9b080fff com.apple.audio.units.AudioUnit (1.7.3 - 1.7.3) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9b233000 - 0x9b23bfff com.apple.DiskArbitration (2.4.1 - 2.4.1) <28D5D8B5-14E8-3DA1-9085-B9BC96835ACF> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x9b488000 - 0x9b65ffe7 com.apple.CoreFoundation (6.7.2 - 635.21) <4D1D2BAF-1332-32DF-A81B-7E79D4F0A6CB> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x9c98c000 - 0x9c9edffb com.apple.audio.CoreAudio (4.0.3 - 4.0.3) <7A14BE52-6789-3CE3-9AE9-B733F4903EB1> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio

Logic pro download issues PLEASE HELP!!!!!

I just downloaded logic pro and it asked me to download extra content...i passed up on it by mistake and can't figure out how to access it again to download?? Please help!!!

Simple...
Start Logic
Go to Logic's Menu Bar at the top of the screen.
Click on Logic Pro in the bar
Click on "Download Additional Content"
Select what content you wish to install (I'd install it all...)
Wait a while (depending on how fast or slow your internet connection is..)
Done!

Recording no audio!!??? PLEASE HELP

Hi,
I am a new audition user and have just set up my mic. I am running my microphone through a mixer, and into my mic input port on my computer. I am hearing gpood sound from my mic through my speakers, but for some reaseon audition does not seem to pick up any signal level at all. I have configured my windows volume control input setting to there highest potential. Still, however, I am unable to record a sound. Since the microphone is working with my computer, I suspect a software issue of some kind. Please help I have been playing with this for days now....

It sounds like a "Windows Mixer" problem to me. Audition doesn't select the source for recording; you have to specify that in Windows.
You don't specify what version of Windows you're using so there will be slight differences, but basically you have to click on the little loudspeaker icon in the bottom right hand of your screen, get to the recording mixer, and select Microphone as the input you want to record. Exactly how you do this varies among Windows versions but with some fiddling around you should find it. Be aware that the basic mixer you find usually comes up showing playback, not record...so even if you can hear your mic you may be recording something else.
This is usually the fix you need, but if it's not enough, check Edit/Audio Hardware Setup in Audition itself to make sure your sound card and appropriate driver are selected by Audition.
Bob

Audio not working.... please help!

Alot of the time when I talk on my phone I use the headset for hands free, but recently I've been having a major problem. After I unplug the headphones, the phone still recognizes them as being plugged in(pressing the volume buttons on the side causes "Ringer(Headphones)" to pop up on my screen.
Now, because the phone still thinks my headphones are plugged in, it doesn't play any audio, except for ringtones... but if I answer the phone, I can't talk unless I plug my headphones back in first. I've tried using the silent/ring switch on the side, restarting my phone multiple times, plugging it into my charger and into my computer, and plugging the headphones back in and then unplugging them again... so I don't know what to do. Please help!

Ok-i think I figured it out (maybe?) I tried the aforementioned tricks to get the headphone jack clean and to no avail neither of them worked. So after some thinking, I used my air compressor to blow out the jack and my phone audio instantly worked. Now I don't recommend doing this because the air could damage your phone if exposed for a period of time but I just did a short burst and it seemed to work fine. Hope this helps anyone who found this issue really annoying....cheers

Why can't i delete my avi files off my sd card on my mac pro (10.7.5) but will work on most recent mac pro? won't move to trash can either? please help

my older brother has the most recent mac pro and it works completely fine on his.
when i go to move videos filess off the SD card on mine however, it doesnt work. Nor does it let me post the new videos on there (althought it did last week)
please help!

my older brother has the most recent mac pro and it works completely fine on his.
when i go to move videos filess off the SD card on mine however, it doesnt work. Nor does it let me post the new videos on there (althought it did last week)
please help!

My MacBook Pro getting so slow and the temperature is really high, Please Help :)

I have problems with my MacBook Pro it warming up to much, the temperature reaching up to 98 degrees, I have to work with a fan for my mac, I searched for information on the subject but concludes as discussed in various subjects is manufacturing problem, well that's the first problem, the second and that worries me, from 1 month ago my Mac started getting so slow I cant work on it, then I format it and install the Lion (before was Snow Leopard that came from the factory when I bought it in April last year) and still with the same problem, looking for solutions I realized that when I work with my mac connected to a power source with the magsafe works perfectly. I perform the hardware test and I get the following error: 4SNS/1/40000001: VPOR-0.592 and can't solve it, I search but no result about this error, also I reset the PRAM and SMC but still the same, my mac just work properly when is plugged to a power source.
Please help!!!!
Thanks in advance
MacBookPro8,1 *Mac OS X 10.7.4 (11E53) (Mac OS X Lion 10.7.4 (11E53)) * Intel Core i7 * 2.7 GHz * 4 GB (1333 MHz DDR3) * ROM MBP81.0047.B27 * SMC Version 1.68f98 * kernel Darwin 11.4.0

i hope someone can help you but sounds like this might be a problem for the genius bar.

Need help with premiere pro cs6 having performance issues please help

need help with premiere pro cs6 having performance issues please help

Welcome to the forum.
First thing that I would do would be to look at this Adobe KB Article to see if it helps.
Next, I would try the tips in this ARTICLE.
If that does not help, a Repair Install would definitely be in order.
Good luck,
Hunt

Audio Sync issues - PLEASE help

I have created many videos in iMovie '09. I have used the HD setting for them, 1280x720 even though they were shot in SD format. I have uploaded them to YouTube and they all view just fine. They all viewed just fine in Quicktime version 7.6.6, as well.
I have been doing this for years now, since at least 2009, and all video/audio has worked flawlessly together.
My most recent problem (past few months) has been that I am now running Mac OS X version 10.6.8. My iTunes is 10.4 and my Quicktime is now 10.0
And now my audio and video WILL NOT SYNC.
I need help very badly because I have a presentation on Saturday and I need to load a bunch of videos (in the same viewer window) and have those videos play in a loop, one right after the other, while I'm talking to prospective clients.
I put these same movies into Quicktime Player 7 version 7.6.6 and they play just fine, still - I just tested this on my imac and my macbook.
I need these videos to play in my iTunes, but the audio/video sync issues have ruined my video play.
Can someone PLEASE help me remedy this situation. I would be forever grateful. I have casually searched for an answer, repeatedly but I need to remedy this by Friday night.
Thank you so much,
YahYah

What format are you using in iTunes to play them back? Are these the exact same files as the one, you are playing back in Quicktime 7?

ADOBE PREMIERE PRO-Merged clips wont link to the Media...please help!

One of my hard drives crashed and it unlinked other media which is on the other hard drive...In Adobe Premiere Pro when I try to link the media it links but the merged clips remain unlinked...I see the picture but no sound. Please help me its a massive project and I'm in desperate need of help. Thanks!

You might want to go read in http://forums.adobe.com/community/premiere/hardware_forum?view=overview
Starting with the FAQ drop down list at the top of the page for many articles/ideas

Ios7 update audio is hissing and static. Please help me get rid of this noise so I may enjoy my audio on my iPad

Ever since the ios7 update my audio is hissing and has static. Please help me get rid of this noise so I may enjoy my audio on my iPad

Just for the record, this is what I wrote to Apple feedback:
(If anyone really knows what the problem is, please let us know.)
Apple iPad mini. Re: Hiss
Hi. I am one of the very unhappy people who can't use the iPad for recording since getting ios7. The apple forum is replete with stories like mine: ios6 recording was quiet - ios7 is noisy. I have tried every suggestion. Why won't anybody at apple tell us what the problem is? I have been using macs since 1986. All I want to do is record my songs on my iPad. Unfortunately for me, I recently brought my iPad-mini refurbished so there is no warranty. If I had bought it new I would be at the Genius Bar until I got the problem fixed. Did I mention how unhappy I am? Here are the specs: 1st gen iPad mini running ios7. Recording onto Multitrack DAW with a Samson Go mic to a 30-pin USB camera adapter, into an apple brand lightening adapter into iPad mini. Everything works fine except for the HISS.
Jeff

Problems with Android 2.1 for Xperia Mini-Pro: no Twitter on Timescape and not all contacts restored - please help!

Hello all! I own an Xperia Mini-Pro which I updated with Android 2.1 yesterday. Having some problems, the main ones being: 1) Timescape does not allow me to sign in to Twitter (it claims my username and password are incorrect, despite successful log-ons with the same details via Twitter Mobile); and 2) not all my backed-up contacts have been restored to my phonebook (and yet they still exist somewhere in the phone - I know this because I can bring up full contact details for people who've sent me SMS - but I cannot find them if I use the phonebook interface). Someone please help? Cheers - Jos

I suggest that you try to clear data and any cache in for the Timescape app.
Menu> Settings> Applications> Manage Applications> Click on the first hardware button (the one with four squares)> Filter> All> Timescape> Clear data and any cache.
Then check if you get the same error when trying to log in to Twitter.
Regarding the contacts I think you should check if they maybe filtered in the phone book. Open the phone book and click on the first hardware button (the one with four squares) > Contacts to view.
Check if some of your contacts might be filtered.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Logic Pro 9: Playhead/Playback/Audio Levels/Logic Pro X Issue, PLEASE HELP!

Similar Messages

Maybe you are looking for