Logic Pro 9 problems with 10.7.4

Hello!
When I work with Logic Pro 9 (9.1.7) and OS X Lion 10.7.4 - Logic crashes and freezes about 2-3 times a day. Never have I noticed this situation before.
Maybe I should install Combo Update of OS X?
I need it to live performances and propably I should come back to Snow Leopard?
I have MBP 15 (early 2011)
Anybody knows the problem??

I'm having similar problems with Logic Pro Studio 8 after I updated to 10.7.4 last night. I can work for about 15 to 20 minutes and then Logic freezes and I have to Force Quit. Logic was relatively fine in Lion up until now, even though there are odd slider bar behaviors, which I'm learning to live with. Freezing is an issue that I can't live with. Yikes!
In the particular song I'm working on there are no 3rd party plug-ins being used. All native Logic stuff.

Similar Messages

  • Logic Pro 7 with MOTU 828 or Apogee Ensemble??

    I've been using Logic with MOTU's 828MKII interface for about 4 years now. Since couple of days go, the 828 keeps freezing. I had to turn unit off and turn it back on and it starts to work again, but freezes again couple seconds later. I've talked to MOTU guys and they told me to switch voltage back and forth and try again. Same thing.
    I finally came to 2 option.
    1. Send the unit to MOTU and get it fixed and hope to work with it without anymore problem in the future.
    2. Get the new MOTU 828MKIII
    3. Get Apogee's Ensemble audio interface. (this one is really pricey for me)
    What do you guys think?
    Should I just get 828MKii fixed or try new gears..?
    I'm a starting film/TV composer/producer and beginning to
    do quite large projects.
    My set up is
    -G5 Quad PowerPC with 2.5GB RAM
    -250GB main hardrive, 500GB second internal hardrive
    -Yamaha HS50M Speaker
    -Yamaha S90ES Synthesizer
    -Apple Cinema 23inch
    -Running Logic Pro 7 with bunch of samples
    and plug-ins in my second internal hard drive.
    Share your opinions please.
    Thanks
    Chris

    Motu use to make one of the most reliable drivers in industry. If you're happy with it and can get it fixed... so why not stick with it for a while?
    On the other hand the new Apogee's software seems to be really solid and Ensemble's converters are much better than MKII.
    So get the 828 fixed, stick with it for a while, save some cash, buy the Ensemble, dump the old 828.
    Hope that helps

  • Logic Pro X with OSX Mavericks 10.9.2 Audio output cuts out 3-5 minutes into running software?

    Logic Pro X with OSX 10.9.2 Audio output cuts out 3-5 minutes into running software how can I fix this?

    Well, first....
    Are you using any 3rd party plugins in your project?
    If not then my suggestion wont be the cause......
    To see which plugins you have installed (Though it's only if they are being actually used in the project that would cause your issue..) you can see them via the Audio Unit Manager found under the Logic Pro X menu bar..... Logic Pro X..... Audio Unit Manager
    Also, any reason you are still using 10.9.2 instead of updating to 10.9.5?
    Do you get any message when the audio cuts out?
    Are you only using internal audio hardware or are you using an external Audio Interface? if so, which one?

  • TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

    Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

    Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
    Have a nice day!

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins, the session opens in the other computer but all the synths reset to presets

    Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins (native instruments komplete 7), the session opens in the other computer but all the synths reset to presets, this didnt happen the first time I shared a session, but its been happening lately quite often

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • Logic Pro 9 (9.0.0).   Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0.   I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

  • I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    If you bought the boxed set of Logic Studio 2.0  which includes LP9, then you cannot  download it. You must use the disks that came as part of the boxed set... to install from.
    If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App,  Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

  • Hello! Can i use logic pro x with mbox 2 ?

    Hello! Can i use logic pro x with mbox ?

    Yes, I´m quite sure you can, go here:
    http://avid.force.com/pkb/articles/download/Mbox-2-Drivers
    Haven't fully tested it myself, but have a go.

  • Logic pro 9 with akai miniak synthesizer/midi recording audio output!?

    I'm using logic pro 9 with my akai miniak/midi. I know how to use the sounds/instruments in logic pro but I want to record "programs/instruments" from my miniak synthesizer keyboard. It shows that Logic receives that info but there is no audio sound when I play it back.

    Midi = Data only not Audio
    To record Audio from your Akai.... You need to connect audio cables from your Akai's audio outputs to Audio inputs on an audio interface connected to your Mac..

  • I've got a mac pro problem with the starting up, but also a red light on the logic board solidly on. Its not among the diagnostic led. It's located near the BT adapter and the front fans. Also the fans run loud also. any solutions?

    Hi
    I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on  the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
    Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
    thanks and hope for your best solutions
    Kari

    I can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.

  • HOW TO FIX LOGIC PRO CRASHES WITH NEXUS PLUGIN ON MAC OS X 10.6.8 !! =)

    After updating my Mac OS X to 10.6.8, my Logic Pro would always crash when opening a project file that uses the Nexus (version 1) plugin...
    I spent hours upon hours, LONG DAYS AND NIGHTS trying to resolve the issue searching all over the internet for solutions and NOTHING helped besides the suggestion to upgrade to Nexus 2, which was not possible for me, or downgrade my OS X to 10.6.7 ...which wouldve been a very annoying procedure for me...
    SOOOOO....
    I dont know why, but my instincts told me to try this solution, out of hope, and it WORKED!!
    So i felt like it was my duty to help my fellow Logic Pro users/producers with this annoying problem!!
    You can thank me by checking out my music @ FAMEisFAMOUS.com and adding me at:
    -Twitter.com/FAMEisFAMOUS
    -Facebook.com/AiricFame
    HERE'S WHAT YOU DO:
    --GO TO APPLICATIONS
    --AND SIMPLY MOVE (DRAG) THE ReFX FOLDER TO YOUR DESKTOP (OR ANY OTHER FOLDER YOU'D LIKE, AS LONG AS ITS NOT IN YOUR APPLICATIONS FOLDER)
    --NOW OPEN LOGIC PRO AND TRY USING THE NEXUS PLUGIN
    --IT'S GOING TO ASK YOU TO LOCATE THE "0TestTone.nxs" FILE
    --NAVIGATE TO THE LOCATION ON YOUR MAC WHERE YOU MOVED THE REFX FOLDER
    --OPEN THE NEXUS FOLDER / SAMPLES / ROM /
    AND THERE YOU WILL FIND THE "0TestTone.nxs" FILE
    --ONCE YOU APPLY THAT, TRY TESTING THE SOUNDS IN THE PLUGIN AND IT SHOULD BE WORKING FINE!
    --NOW EVERYTIME YOU SAVE, AND REOPEN LOGIC YOU SHOULD BE GOOD TO GO!!
    Hope this works for you like it did for me...
    Much Love!,
    -Airic Fame
    FAMEisFAMOUS.com

    Hi Airic Fame!
    I had just the same problem and tried your way to fix it. WORKED PERFECTLY!!!
    thousend thanks!!!!  you're a Genius!!
    Martin

  • LOGIC PRO - problem when recording guitar

    Hi,
    So I am having the following problem as I plug in my guitar in the interface (yamaha) and then into logic pro. I manage to record in the AUDIO track for some time, about a minute or so, and then I always hear a strange scratching sound and the guitar suddenly stops recording. I have tried it over and over and it always happens. I thought it was because the PHANTOM button on the interface was on, but even when I turn it off it still happens.
    does anybody know what I am talking about and what is the solution to this problem?
    thank you.

    these things didn't work. I think that the problem also has to do with the interface on my guitar (not sure it's called that way. What I mean by it is the electronic little box ON THE GUITAR that works as a tuner and needs to be turned on when you are connected to a speaker), because that's what turns off as I am recording. so I am wondering, is there a way to record the guitar without having that little box thing turned on, by any chance?   the yamaha is a AUDIOGRAM3
    thanks!

  • LOGIC PRO 8 with motu 828mkII audio interface

    I have bought a MOTU 828mkII Firewire and I am using it with a Mac Pro Intel
    dual core v. 10.4.10 running Logic Pro 8.
    My mixer is a Yamaha DM-1000. I have a problem with audio.
    I have the mac going into the 828 via a firewire cable, then out of the 828 to
    the mixer using 8 channel adat lightpipe. All devices have the same 48k sampling
    rate but I can not hear a logic virtual instrument, like a piano, using the adat
    lightpipe interface. If I use the analog "main outs" on the 828 I have audio,
    but nothing comes thru the adat output. If I use another application besides Logic with the same setup, the adat connection works fine. This leads me to think the problem has to be in Logic and how it interfaces with the Motu 828mkII. I have read all manuals and can't figure
    out what's wrong. Any suggestions?
    Thank you,
    Pierre.

    Generally, outputs on audio interfaces are discreetly named. So, if your master output is set to Output 1&2, that might refer to your analog outputs. If you want to send the a different set outputs, say, a stereo pair via ADAT, you might need to send to outputs 5&6, instead of 1&2.

  • Logic pro 9 with imac 27" resolution issues

    hello,
    every time i open logic with my new 27" imac i get a systems requirements pop up that says: Logic Pro recommends a screen resolution of 1024x768 otherwise the software may not function properly. the recommended resolution shrinks the screen size down to like 20-24 inch size screen. this looks like a issue with no immediate solution.
    any input would be greatly appreciate
    best regards

    So always the same problem, maybe from ESX24, I don't know...
    When I try to right click on "full strings legato.exs" (in /library/Application Support/Logic/Sampler Instruments/orchestral/full strings legato), and open it with LP9 or Main Stage, it tells me that "the file is corrupted" from MainStage, and "impossible to open the file" from logic...
    Thank you again!

  • Logic pro 9 with mavericks? Orchestral instruments..

    Bonjour,
    Je ne sais pas si c'est depuis Mavericks ou Mountain Lion, mais impossible pour Logic Pro 9 de retrouver les orchestral.... Comment faire?
    j'étais avant sur un imac 17" qui tournait sur snow léopard, je suis passé à un imac 27", et transféré mes données via time machine.
    merci pour vos réponses!!
    Hi!
    I do not know if it's from Mavericks or Mountain Lion, but impossible for Logic Pro 9 to find the orchestral instruments now .... How to do?
    I was in on a imac 17 " that ran on snow leopard, I switched to an iMac 27" and transferred my data by time machine.
    thank you for your answers!
    Where are the orchestral instruments??? And some others instruments... Can't find it now.. Any answers please!!

    So always the same problem, maybe from ESX24, I don't know...
    When I try to right click on "full strings legato.exs" (in /library/Application Support/Logic/Sampler Instruments/orchestral/full strings legato), and open it with LP9 or Main Stage, it tells me that "the file is corrupted" from MainStage, and "impossible to open the file" from logic...
    Thank you again!

Maybe you are looking for