Logic pro 9 quits on startup. How can this be resolved please? Checked disk utility and all seems to be ok...
Hi
I've tried top open logic pro 9 today which I use daily and have been for the last 4 years. All software etc. is up to date. However it just quits and I get the 'logic pro quit unexpectedly' message. I've tried this several times in the last hour, including a restart and checking disk utility etc. Anyone else have the same problem? And if so, how did you resolve it please?
Failing that....
Please download Etrecheck from here...
http://www.etresoft.com/etrecheck
..and then launch Logic Pro
Now run Etrecheck and post up the full report here....
Thanks...
Nigel
Similar Messages
-
I upgraded my Icloud storage capacity to a higher tier and my Iphone does not reflect the change although my credit card was charged and the device is nor properly backup. How can this be resolved?
It seems to take up to a couple of days for the upgrade to take hold, at least that's the experience of some users. Give it 24 hours before contacting apple.
For customer service issues, go here...
https://expresslane.apple.com/Issues.action -
I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I have set up a Time Warner email account in Mac Mail but can't send email with this account because the Road Runner SMPT server is "offline." How can this be resolved?
Is this any help?
http://www.timewarnercable.com/en/residential-home/support/faqs/faqs-internet/e- mailacco/how-do-i-set-up-my-twc-mail-for-mac-osx.html
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users. -
How can I get bigger size letters in ribbon and all setting up interface?
Hello everyone! This must be simple but I could not get a clue by myself. New macbook air user. How do you get bigger size letters in ribbon and all setting up interface? Everything is just so small!
Hello and thanks Lousy! Found out web page and docs can be enlarged by trackpad motion control. Other interface can be zoomed+by alt+cmd+8(Spanish keyboard ) thanks for your quick answer. I am dummy new Mac user.
-
wien I access Itunes I get the notification....the song could not be located because the origional filoe could not be found...I have over 2000
songs in my library ....Does this mean they are all gone....How can one retrieve them???This missing song thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
Once you've sorted out the broken links I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background.
tt2 -
My safari is not responding on a daily basis. how can this be resolved?
The last 5 days Safari is not working properly. i work on a macbook pro with ios x version 10.9.2. Especially when I try to copy a link, it stucks and it not responding further so I have to force quit! What should I do to resolve this? *
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Orientation no longer rotates - how can this be resolved?
I received my iPad2 Aug 16. Today is Sep 10. Why does this happen & what is the resolution? Also how do I determine my operating system?
Is there a lock symbol at the top of the screen next to the battery indicator ? If so, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock the rotation by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If there isn't a lock symbol then try a reset : ress and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
In terms of the iOS version, then it's shown in Settings > General > About > Version. It also shows on the Summary tab when connected to your computer's iTunes. The current version is 4.3.5 - if you are not on 4.3.5, and you want to update to it, then click on the Check For Updates button on the Summary tab when connected to your computer's iTunes -
Am getting script errors. js/ff_browser:28. how can this be resolved
have been getting script errors. js/ff_browser:28.
it only happens with firefox. please advise how this can be resolved.Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
If I keep my email open (yahoo) then after a while it get the error message below and can no longer read or send mail until I close firefox and reopen. Why am do I constantly get this message?
"An unexpected problem has occurred. Performing your action again in a few moments will probably solve the problem. If it persists, we suggest you close this window and re-launch Yahoo! Mail."
Along with this info-<html>
<head><title>404 Not Found</title></head>
<body bgcolor="white">
<center><h1>404 Not Found</h1></center>
<hr><center>nginx/0.6.32</center>
</body>
</html>See:
*http://en.kioskea.net/faq/15289-google-nginx-404-error -
When clicking the "browse" button in attempt to upload photo I'm taken to the "file upload" page at which point I get a message that the program is not responding.
VmusicV,
No one said anything about their being old, troublesome versions causing the problem. Sometimes, at no fault of Mozilla or Firefox, installations can become corrupt. This presents the need to erase the install and start over. It takes only a few minutes to accomplish and should only be required on rare occasion unless there is something seriously wrong with the computer. Your claim that "it's untested" is simply unwarranted, false and does nothing to assist with this issue. This does not appear to be a systemic issue with Firefox 25, so a local root cause is most likely.
If you don't like this possible solution, just wait for another contributor to offer advice. The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. (You'll need to be on the latest version of Firefox to submit feedback). Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues. -
Images with transparency display edge artefacts - What am I doing wrong, how can this be resolved
Hi there
Using MUSE CC 2014
I need to place photoshop images of text (with transparency) over a full screen slide show but I'm getting edge artefacts around the lettering which looks, well frankly, horrible. I don't recall previous versions of MUSE being quite as bad as this, am I doing something wrong? Is there a trick to overcome these ugly artefacts?
PSD Images are being imported SS
Many thanks in advance for any help.Hi Vikas
I was dropping a pds file onto the stage. No other layers than image and transparent bg. I was scaling the image down in Muse which as I've discovered exaggerates the visibility of the image edge artefacts. After doing a bit of reading it appears this is a known problem with Adobe Muse, something to do with the algorithms Muse uses to scale images. I also think the colour of the layer contributed a little to the effect also.
Problem solved when I ditched the PSD route and instead imported the image SS as a PNG. -
My account name (for as far as I can remember) was Duckwhisperer.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
* https://support.mozilla.com/en-US/kb/latest-firefox-issues
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
* https://support.mozilla.com/kb/Mozilla+Crash+Reporter
* https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report -
I am using windows xp and iPad 2.
Interestiingly this does seem to be the case on all films???Sorry that should have read does NOT seem to be the case
-
FF 4.0. The menus flash like a key is being held down making them inaccessible. The problem persists with all plugin's turned off. Firefox box in top left corner not showing. The old FF logo show there instead.
Turning off hardware acceleration worked in all cases.
With hardware acceleration enabled the menu flashing did not occur on the primary display, only the secondary display of a two-monitor system.
Windows 7, ATI Radeon 4800 series.
Maybe you are looking for
-
Hi all, How can I define select-options for a method in a global class. And how can I pass these select-options from a report. Thanks & Regards Eshwar
-
Update on my K8N and a question about voltage
Well, I've read all the threads in this and several other forums about the k8n. I have tried everything (including putting my raid on sata 3 & 4). I cannot go above 235 - 240 HTT and that's with an 8x multiplier (also tried 10, 9, 7, 6, 5, 4) and m
-
hi, We want to cancel GR for a Purchase order, but already invoice has been made. what will happen if we cancel the GR when invoice is already created, but vendor not paid.
-
How to convert file format using bfile datatype
<pre> Hi all, Assume, i has a table BFILE_IMAGE and it table structure is similar like: SQL> desc bfile_image; Name Null? Type IMAGE_ID NUMBER FILE_NAME VARCHAR2(30) IMAGE BINARY FILE LOB SQL> Is that impossible if we can use process() function with
-
My brother borrows it and always adds music to it. I want to prevent this from happening.