Logic Pro 9 why am I hearing the last take when I'm in cycle mode and trying to produce multiple takes?

Hi all,
More questions about recording in Logic Pro 9. Just wondered...is it called cycle mode when I have an area I want to record multiple takes at? And, why am I hearing the last take when it is cycling at take 2, 3 etc.? Please reply. Thank you.
David

Have a look here:
http://youtu.be/e5PbrWJrq4k
......and here:
http://youtu.be/M_SUrJRuENw
Have a nice day!

Similar Messages

I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

I forgot the code for my iPhone to access the Home screen I do , please help me
try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

Hello polo-angulo,
I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Get help with iOS update and restore errors - Apple Support
Sincerely,
- Brenden

Lumia 800: cannot hear the other side when receivi...

hello all.
i had recently upgraded to w7.8 for my phone, and problem started coming.
i cant seems to hear the other person when i get or make calls, and they cant hear me too.
i get this problem quite often, and i tried factory reset, and no data is loss( i wonder do i perform the resetting correectly)
i tried off and on my phone again. same thing still happen occasionally.
what is going on? PLeAse help!!!
the phone is only 2 months old and never drop/bump anything.

If you can't hear the caller THIS may be helpful ..but if the other end can't hear you then may be you need to visit Nokia Care
BTW, How did you do the Factory reset ?

USB MIDI CONTROLLER- LOGIC PRO 7- I CAN SEE THE LIGHTS BUT NO SOUND OUT?

I just got logic pro 7.2 so i am very green, garage band automatically recognizes the usb midi controller and i can hear it,
in logic it recognizes it i can see the lights for sound levels but no sound is coming out, ive been trying to figure this out.

Heck, if loneliness is your thing... more power to ya!
now why cant i hear the midi
MIDI doesn't make a sound. You either need to assign a software instument to it or use an external device, all depending on the track you chose. If you, perhaps elaborate a little more as to what you did (typing with your caps lock released), there's a better chance of getting your problem solved. If you're hearing your recorded guitar, then there's a chance you selected the wrong type of track to record to as far as MIDI tracks go (there is a difference in Logic).
jord

Why can't I hear the phone ring when I call somebody, but if I put the speaker on it works

Why can't I hear the phone ring when I call somebody, but if I put the speaker on I can hear the ringing?

Don't jump all the way to restoring just yet. Check to make sure there's nothing in the headphone jack, and nothing covering the microphones (including the noise cancelling microphone at the top next to the headset jack)
1. Restart the device. http://support.apple.com/kb/ht1430
2. Reset the device. (Same article as above.)
3. Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
4. Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Does Logic Pro X actually work with the Roland VS-20?

Hi all. According to the support docs, the Roland VS-20 should work with Logic Pro X. I've installed the latest drivers, the latest Logic plug-in for the VS-20, and the latest VS-20 Editor. On occasion (and I have no idea what the magic formula is), I've gotten the controls and audio to work via the VS-20. However, more often than not, the VS-20 controls (transport controls and faders) do nothing, and playing audio results in a horrible screeching through the VS-20.
A couple of other points of info:
The VS-20 always shows up correctly in the Control Surface and audio settings of Logic Pro X.
The VS-20 works fine in Reaper 4 as well as when only using the VS-20 Editor.
I'm using Logic Pro X (10.0.3) on a 2012 MBPr w/ 2.6GHz i7 and 16GB RAM
Is anyone out there using this setup successfully?
Thanks!

Roland was very helpful, even though their solution didn't actually work for me. I sent them the same info as above, and here was the reply:
We are sorry to hear that you are having trouble. The VS-20 is definitely compatible with Logic Pro X. Be sure that you have setup the VS-20 in Logic Pro X according to the following instructions:
Audio I/O Setup:
1.     Select Logic Pro X in the menu bar and navigate to Preferences.
2.     Click on “Audio...”
3.     Under the Devices tab, set your Output Device and Input Device to “VS-20 44.1kHz”--if it is not already set.
Note: The sample rate of your Logic Pro X project must be 44.1kHz--as the VS-20 only operates in this sample rate.
4.     Click “Apply Changes”.
5.     Close the Preferences menu.
Control Surface Setup:
1.     Select Logic Pro in the menu bar and navigate to Preferences.
2.     Navigate to Control Surfaces and then click on “Setup...” A Setup window will appear.
3.     Click on “New” and then select “Install…” An Install window will appear.
4.     Select “Mackie Designs (Manufacturer) / Mackie Control (Model) / Logic Control (Module) and then click “Add”.
Note: If prompted with the message “No new Devices found”, click on “Add Manually”.
5.     In the Setup window, expand the Mackie Control section and assign both the Out Port and Input Port to “CONTROL”.
Note: If the Setup window does not appear, right-click on the Mackie mixer image and then select “Hide/Show Inspector”.
6.     Close the Control Surface Install and Setup windows.
The VS-20 is now setup for Logic Pro X.
We hope this information is helpful! Please let us know if this does not resolve your issue and include as much information as possible regarding troubleshooting you have done and results you have received. We are happy to help you.
Sincerely,
Roland Product Support
These steps actually resulted in a situation where some of the buttons on the VS-20 triggered sounds instead of their intended functions. I deleted everything and started over, this time picking the actual VS-20 option in the setup, and everything worked.
I should mention that I also (foolishly?) updated to Mavericks just before getting this to work.

I have a 1st Gen, MacBook Pro from 2006. For the last few years I've had to us my power adaptor as my battery no longer works. Now my power adaptor looks like it's coming to an end. Even though it's securely fitted, it often switches off.

I have a 1st Gen, MacBook Pro from 2006. For the last few years I've had to us my power adaptor as my battery no longer works, and shuts down after 30 seconds it. Now my power adaptor looks like it's coming to an end. Even though it's securely fitted, it often switches off.
I am planning on buying a new MacBook Pro later this year, but for the meantime I'm not sure if I should buy a new power adaptor, or if this is a problem with my MacBook Pro. Also does anyone know where I can buy a battery in the UK for 1st Gen MacBook Pro.

OWC has batteries for 1,1 generation MacBook Pros and they ship internationally - http://eshop.macsales.com/.
Your best bet for a power adapter is to get one from Apple. Third-party adapters just don't seem to be reliable (or safe). You can also buy a replacement battery directly from Apple, of course, but they're a bit more expensive.
Good luck,
Clinton

I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

My original question :
I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

Buy logic pro 9. installer write that the serial number is not valid.

buy logic pro 9. installer write that the serial number is not valid.

You bought the box or Logic Pro in the Mac App Store?
Yes, BOX
Message was edited by: VLyahov

How do I install Logic Pro 8.0.2 on the latest macbook pro?

I just bought a new macbook pro retina and realised that it does not have a disc slot
to put the installation disc in!
How do I install Logic Pro 8.0.2 on the latest macbook pro?
Also is there a way for me to upgrade it to Logic Pro X?
Please help!

Forget Logic Pro 8 on your new macbook, it will not work. The "upgrade" to LPX will cost you around 200 bucks and can be acquired via the App Store.
Have a nice day!

Why does safari show the last used page when the Ipad is turned on again

Why does Safari show the last used page when the IPad is next used?

Read this article: Open iOS Safari to a blank page, http://www.macworld.com/article/159303/2011/04/ios_safari_blank_page.html

HT4910 Why do I get "The last backup could not be completed" Last backup: 5/4/12 at 11:16 am?

Why do I get "The last backup could not be completed" Last backup: 5/4/12 at 11:16 am every time I try to back up my iphone 4s? I also get a message that my iphone hasn't been backuped in 32 weeks?

Welcome to the Apple Community.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.

Logic Pro quit unexpectedly while using the Altiverb 7 plugin.

Ever since I upgraded to the Altiverb 7, I'm getting this message: "Logic Pro quit unexpectedly while using the Altiverb 7 plugin".
Sometime I have to restart the Logic twice or more times. Even when Logic finally opens it takes about 30-45 seconds before it becomes functional - as it's loading the AUs. I have never experienced this with the Altiverb 6.
And yes... I asked the Altiverb people as well.
Thanks.
J.

Are you using 10.7.5 as your info line states?
If so, see if you need this supplemental update.
http://support.apple.com/kb/dl1599

Why can i hear the person talk but they cant hear me?

why can i hear the person talk but they cant hear me?

you microphone may be defective, did this happen after an update???

In logic pro, where do you find the knobs for the guitar amps like the treble, gain, mids, drive, level? In garageband there're knobs for the amp

In logic pro, where do you find the knobs for the guitar amps like the treble, gain, mids, drive, level? In garageband there're knobs for the amp & effects & pedals but in logic pro 9 all are just presets?
Thanks for any help.

From one old hippie to another..
LOGIC IS NOT GARAGEBAND
Stop comparing the two it's annoying!
There, I feel better!

Logic Pro 9 why am I hearing the last take when I'm in cycle mode and trying to produce multiple takes?

Similar Messages

Maybe you are looking for