Logic pro 9 with imac 27" resolution issues

hello,
every time i open logic with my new 27" imac i get a systems requirements pop up that says: Logic Pro recommends a screen resolution of 1024x768 otherwise the software may not function properly. the recommended resolution shrinks the screen size down to like 20-24 inch size screen. this looks like a issue with no immediate solution.
any input would be greatly appreciate
best regards

So always the same problem, maybe from ESX24, I don't know...
When I try to right click on "full strings legato.exs" (in /library/Application Support/Logic/Sampler Instruments/orchestral/full strings legato), and open it with LP9 or Main Stage, it tells me that "the file is corrupted" from MainStage, and "impossible to open the file" from logic...
Thank you again!

Similar Messages

  • Logic Pro 8 with iMac?

    I'm planning on buying a refurbished 20" 2.4 iMac, and upgrade it to 4gbs of ram. Will Logic Pro work well. I'm planning on recording up to about 35 tracks at the most. My audio interface is a Presonus Firepod. Would buying a 2.8 iMac make a big difference? Thanks in advance.
    -Ash

    Hi Ash
    That should work beautifully with LP8. I designed a small studio setup for Vancouver Adapted Music Society based around the 24" version of the 2.4Ghz duo core iMac, same ram too, and it has ran great for nearly a year now with Logic Pro 8 Studio. It also has a 1Tb external firewire drive for recording and an Apogee Ensemble for an i/o. As long as you grab an external drive for recording to it should be perfect.
    Have fun!
    Bobs
    http://www.vams.org

  • Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

    Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

    Hi there,
    Did you find out anything more in regard to this?
    I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
    However the hardrive has just been replaced on the iMac which now has Snowleopard.  I don't want to have to update to Lion and then fork out £500 for Pro Tools 10. 
    I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
    Your advice would be appreciated
    PXC

  • Logic Pro X with OSX Mavericks 10.9.2 Audio output cuts out 3-5 minutes into running software?

    Logic Pro X with OSX 10.9.2 Audio output cuts out 3-5 minutes into running software how can I fix this?

    Well, first....
    Are you using any 3rd party plugins in your project?
    If not then my suggestion wont be the cause......
    To see which plugins you have installed (Though it's only if they are being actually used in the project that would cause your issue..) you can see them via the Audio Unit Manager found under the Logic Pro X menu bar..... Logic Pro X..... Audio Unit Manager
    Also, any reason you are still using 10.9.2 instead of updating to 10.9.5?
    Do you get any message when the audio cuts out?
    Are you only using internal audio hardware or are you using an external Audio Interface? if so, which one?

  • TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

    Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

    Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
    Have a nice day!

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins, the session opens in the other computer but all the synths reset to presets

    Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins (native instruments komplete 7), the session opens in the other computer but all the synths reset to presets, this didnt happen the first time I shared a session, but its been happening lately quite often

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • Logic Pro 9 (9.0.0).   Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0.   I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

  • I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    If you bought the boxed set of Logic Studio 2.0  which includes LP9, then you cannot  download it. You must use the disks that came as part of the boxed set... to install from.
    If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App,  Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

  • Hello! Can i use logic pro x with mbox 2 ?

    Hello! Can i use logic pro x with mbox ?

    Yes, I´m quite sure you can, go here:
    http://avid.force.com/pkb/articles/download/Mbox-2-Drivers
    Haven't fully tested it myself, but have a go.

  • Logic pro 9 with akai miniak synthesizer/midi recording audio output!?

    I'm using logic pro 9 with my akai miniak/midi. I know how to use the sounds/instruments in logic pro but I want to record "programs/instruments" from my miniak synthesizer keyboard. It shows that Logic receives that info but there is no audio sound when I play it back.

    Midi = Data only not Audio
    To record Audio from your Akai.... You need to connect audio cables from your Akai's audio outputs to Audio inputs on an audio interface connected to your Mac..

  • Logic Pro 7 with MOTU 828 or Apogee Ensemble??

    I've been using Logic with MOTU's 828MKII interface for about 4 years now. Since couple of days go, the 828 keeps freezing. I had to turn unit off and turn it back on and it starts to work again, but freezes again couple seconds later. I've talked to MOTU guys and they told me to switch voltage back and forth and try again. Same thing.
    I finally came to 2 option.
    1. Send the unit to MOTU and get it fixed and hope to work with it without anymore problem in the future.
    2. Get the new MOTU 828MKIII
    3. Get Apogee's Ensemble audio interface. (this one is really pricey for me)
    What do you guys think?
    Should I just get 828MKii fixed or try new gears..?
    I'm a starting film/TV composer/producer and beginning to
    do quite large projects.
    My set up is
    -G5 Quad PowerPC with 2.5GB RAM
    -250GB main hardrive, 500GB second internal hardrive
    -Yamaha HS50M Speaker
    -Yamaha S90ES Synthesizer
    -Apple Cinema 23inch
    -Running Logic Pro 7 with bunch of samples
    and plug-ins in my second internal hard drive.
    Share your opinions please.
    Thanks
    Chris

    Motu use to make one of the most reliable drivers in industry. If you're happy with it and can get it fixed... so why not stick with it for a while?
    On the other hand the new Apogee's software seems to be really solid and Ensemble's converters are much better than MKII.
    So get the 828 fixed, stick with it for a while, save some cash, buy the Ensemble, dump the old 828.
    Hope that helps

  • Focusrite Scarlett 2i2 clapping and crackling issues with Logic Pro x new iMac 27"

    Hi,  I have just purchased a brand new iMac and downloaded Logic Pro x,  I also purchased the Focusrite Scarlett 2i2 interface.  I have downloaded the drivers from the focusrite website and everything is set up,  when I plug in guitar or mic I get really bad clapping and crackling to the point where the sound cuts out altogether.  I have changed buffer size and sample rates and everything else I can think of but nothing seems to fix the problem.  I also deleted the 2i2 drivers and logic and reinstalled them both but still have the same issue,  when I record using the iMac built in mic everything is fine so it's deffinately something to do with the interface.  I am waiting to hear back from Focusrite tech help.  Does anyone else have this problem?  Any help would be appreciated.

    I'm having a similar issue which might indicate that the problem is not your interface.
    Yesterday I migrated all my stuff from my 2009 iMac to a brand new iMac 27", and when I did a quick test to play back some old projects in Logic there was loads of annoying clicks and pops. My interface is a Roland Octa-Capture.
    I also noticed some weird CPU spikes from time to time, which I never had on my older, much less powerful iMac...

  • 10.8.4 Logic Pro Hard Drive (Disk I/O) issue

    Hey,
    since yesterday my Logic Pro (9.1.8) has a big problem. After I installed the Update 10.8.4 the Hard Drive (Disk I/O) Display overloads everytime, when i start to play my vocals/tracks. Even older projects (i never had problems) with just 20 tracks and without third party plugins the HD Display goes up and with the latest project (49 Tracks) i cannot even create a new track anymore. It says "not enough memory" and then it crashes.
    I bought my Imac some months ago. Just some informations about my Imac.
    - Late 2012, 21,5"
    - 16 GB Ram
    - 2.7 GHz Intel Core I5
    - Hard Disk 5400 revolutions per minute, Sata (still 900 GB free)
    Basically I bought my Imac to create music and to use logic pro - its very frustrating .. i cannot work anymore.
    I tried everything - change the settings, change the buffer size, not to use my interface, 32bit to 64bit, to delete Autotune (my only third party plugin) from the AU-Manager. I even had a call with the Apple Support (2 hours long) and they couldnt find a solution ..
    If they cannot find a solution, i think its even harder to find someone here, who can help me. So my question is just, is there someone else who has a similiar problem with the update??  .. I'd say a problem shared is a problem halved :-)
    thank you & nice greetings from Austria :-)

    Hello Stefan,
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • HOW TO FIX LOGIC PRO CRASHES WITH NEXUS PLUGIN ON MAC OS X 10.6.8 !! =)

    After updating my Mac OS X to 10.6.8, my Logic Pro would always crash when opening a project file that uses the Nexus (version 1) plugin...
    I spent hours upon hours, LONG DAYS AND NIGHTS trying to resolve the issue searching all over the internet for solutions and NOTHING helped besides the suggestion to upgrade to Nexus 2, which was not possible for me, or downgrade my OS X to 10.6.7 ...which wouldve been a very annoying procedure for me...
    SOOOOO....
    I dont know why, but my instincts told me to try this solution, out of hope, and it WORKED!!
    So i felt like it was my duty to help my fellow Logic Pro users/producers with this annoying problem!!
    You can thank me by checking out my music @ FAMEisFAMOUS.com and adding me at:
    -Twitter.com/FAMEisFAMOUS
    -Facebook.com/AiricFame
    HERE'S WHAT YOU DO:
    --GO TO APPLICATIONS
    --AND SIMPLY MOVE (DRAG) THE ReFX FOLDER TO YOUR DESKTOP (OR ANY OTHER FOLDER YOU'D LIKE, AS LONG AS ITS NOT IN YOUR APPLICATIONS FOLDER)
    --NOW OPEN LOGIC PRO AND TRY USING THE NEXUS PLUGIN
    --IT'S GOING TO ASK YOU TO LOCATE THE "0TestTone.nxs" FILE
    --NAVIGATE TO THE LOCATION ON YOUR MAC WHERE YOU MOVED THE REFX FOLDER
    --OPEN THE NEXUS FOLDER / SAMPLES / ROM /
    AND THERE YOU WILL FIND THE "0TestTone.nxs" FILE
    --ONCE YOU APPLY THAT, TRY TESTING THE SOUNDS IN THE PLUGIN AND IT SHOULD BE WORKING FINE!
    --NOW EVERYTIME YOU SAVE, AND REOPEN LOGIC YOU SHOULD BE GOOD TO GO!!
    Hope this works for you like it did for me...
    Much Love!,
    -Airic Fame
    FAMEisFAMOUS.com

    Hi Airic Fame!
    I had just the same problem and tried your way to fix it. WORKED PERFECTLY!!!
    thousend thanks!!!!  you're a Genius!!
    Martin

Maybe you are looking for