Logic Pro and Pro Tools DAE

Hey whats up.
I got Logic Pro, Pro Tools HD2, (2) 96ios, and (2) 1622s.
I have 48 inputs...
I want to be able to use Logic's soft synths and have the outputs go into my Pro Tools Audio Interface.
I was reading the TDM guide and some questions here but I can't figure out what I'm supposed to do.
I go to Audio Hardware and Drivers... but it only shows Core Audio. Not DAE or DTDM. Do I have to install something with my Pro Tools system to make them show up?
Also, Is it possible to have Logic's Soft Syths go directly to Pro Tool's interfaces?
Thanks very much for any help on the matter.
Josh
Mac Pro Mac OS X (10.4.8)

My system is working fine besides this.
But when I got to Audio Hardware and Drivers I only have a Core Audio tab... Not DAE or DTDM.
I called tech support and they looked on the Pro Tools website. It says:
* Logic Pro 7.2 is supported on Intel-based Mac versions of Pro Tools only via Core Audio at this time.
So this means that I can't output my synth sounds out to separate Pro Tools channels???
I'm ready to give up and wait for an update but can this really be? I have Pro Tools HD2 and a Mac Pro. They are too new??? I hope I'm wrong. What do u think?
Thanks very much.
Josh
As for the Key Commands, it was the next plug-in and I assigned them to + and -.... Thanks guys!
Mac Pro Mac OS X (10.4.8)
Mac Pro Mac OS X (10.4.8)

Similar Messages

Logic Studio and Pro Tools 6.9

Anyone knows if there is a know issue about compatibility between Logic Studio and Pro Tools 6.9 software? Whe I launch Logic , it says that it can't find DAE folder and other TDM things...
any idea?
Chix

Thx Mark,
"probably" would mean that are you sure or just is an ipotetic answer?
Nobody here has Logic 8 and HD2???

How do I upload Adobe Reader 9, Adobe Acrobat XI Pro, and other tools with the Pro onto my new computer?

     Since I am already a customer of Adobe, I need to know how to upload Adobe Reader 9, Adobe Acrobat XI Pro, and the other tools that go with both programs onto my new Windows 7 HP computer without having to fill out a new customer form or without having to pay for another Adobe membership as a new member? I need to know what to do step-by-step so that I can upload my Adobe reader 9, Adobe Acrobat XI Pro, and the other tools for the Reader and the Acrobat XI Pro.
     You may send the step-by-step instructions to my e-mail address of [email address removed by host].
     Thank you!
Dean W. Ballew

I have been trying to start my subscription again for my Acrobat XI Pro and for the annual subscription of the PDF Export for Word and Excel. The PDF Export expired according to my subscription list, but, I think that I had cancelled my Acrobat XI Pro of $ 29.99 monthly, so, I am wanting to presubscribe for it again, but, when I try to put my Code in for my Debit Card, it will not register with your company.
So, I do not know what to do to get it back again with my monthly and annually subscription payments for PDF Export and for Acrobat XI Pro. I have already downloaded the Adobe Reader XI onto my computer so I am set for that product. I just do not know what to do about the PDF Export and the Acrobat XI Pro to be able to get them started once again.
Dean W. Ballew

Logic express and pro 7 to logic studio 9 upgrade question

I have logic express 7, logic studio 7, and just upgraded to logicstudio 9, but my serial number is not recognized. All my copies should be registered with apple already, so how should i best remedy this?

Hi again and thanks for the reply.
I tried to follow your instructions but isn't working still. I think I did something wrong. Here is what I did:
1. Went to Midi Setup, double clicked on IAC driver and then checked the "device is online" box. It says its on Bus 1.
2a. In pro tools, went to peripherals, at the synchronization tab I left MTC reader port: ANY and put MTC Generator Port: IAC Driver, Bus 1
2b. Then went to the Machine Control tab, enabled MIDI Machine Control and set it to IAC Driver, Bus 1.
3a. In Logic Express I went to preferences>Midi>Sync and selected listen to MMC Input and took Midi Clock off. I see where it says MTC but there isn't a place to make it the slave.
I know I'm not doing this right because I hit play on Pro Tools and Logic Express just laughs at me
Can you help me through this. I'm a novice with Macs and Syncing.
Thanks again friend.
Josh
Mac Pro Mac OS X (10.4.8)
Mac Pro Mac OS X (10.4.8)

Difference between Logic Express and Pro? ro

Is the actual logic part the exact same? Is it that with the Pro you get all the extras? (soundtrack pro, qmaster, logic node, compressor, main stage, wave burner, jam packs). Is that what makes it the "pro" version? Or does the actual Logic app offer more abilities? If so, I can't seem to see much a difference. thanks

The app itself is indeed the same, but the included content and plug-ins are different.
This Apple support document details all the differences:
http://support.apple.com/kb/HT4229
* Effect plug-ins found only in Logic Studio
Space Designer (convolution reverb)
Delay Designer
Match EQ
Linear Phase EQ
Adaptive Limiter
Multimeter
Multipressor (Logic Express includes a preset-only version)
Loopback (Available only within MainStage)
Binaural Post Processor
Downmixer
Multichannel Gain
Surround Compressor
** Instrument plug-ins found only in Logic Studio
Sculpture Modeling Synthesizer
EVP88 Vintage Electric Piano
EVB3 Vintage Tonewheel Organ
EVD6 Vintage Clav
Playback (Available only within MainStage)

HP Printers - 8000 Pro and Pro 8500A Plus all in one wireless setups

First, six weeks of customer support has not been able to get my 8500A Plus all-in-one install on my XP Pro SP3 laptop. I've uninstalled the printer using HP's utility, the Control Panel and still can't install it wireless to this laptop. I am about to attempt an Ethernet connection, but have little to no confidence in it's success. The support has been terrible - repeating the same steps over and over, promising call backs and never calling back, promising escalation and always talking to a level 1 support person that repeats the exact same steps, and promises to solve the problem. The last person couldn't figure out how to shut off the wireless feature on the printer - it hung every time I did what he told me too. I also get periodic "crashes" white screens on the printer's display and all of the lights flashing.
Anyone have a suggestion? HP want to replace this printer?
Second, since I've had so much trouble with the 8500, the uninstallation process uninstalled the 8000 Pro I had on my network, wireless and working. Now, the installation of the 8000 Pro has failed three times. I'm attempting a USB installation with hopes to switch to wireless, but the process (at around 33% of step 3 of 4) is taking hours! What gives?
Any suggestions? I surely don't want to call HP Customer Care for support, and waste another six weeks on a second printer.

This alignment page document may help:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03094803&lc=en&product=4116838&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Backward Compatibility of Acrobat 9 Pro and Pro Extended

if I make a pdf with a swf or mov. file in Acrobat Pro Extended, can someone with Acrobat 6 or 7 see those features when they open it up?
Where is there a chart for these version differences on the website. I could not find it readily.

It depends. How are you inserting the mov/swf file in Acrobat 9?
Once you click the insert video/flash button in Acrobat Pro Extended, you'll see a dialog with lot of text (read it :-)). Essentially, by default the .mov would be converted to flash video and embedded in PDF file. This would be viewable only in Acrobat/Reader 9 and users on a lower version will get a message to update their program. On the plus side, the video would be played natively by Acrobat/Reader 9 and users would not need any player like Quicktime installed to view the video.
On the same dialog, there is an option (link) to "create legacy multimedia content". If you choose that option you can create files with video that can be viewed using Reader 5/6 but would require user's machine to have a native video player installed.

MACBOOK PRO and PRO RES

Hello all!
I am researching buying a 15" middle tier, macbook pro for video editing. I understand you need an HD video card to capture the HD video to convert into Pro Res. But once its in the pro res format, can you use a macbook pro to edit it?
And if you can, is it extremely slow that's it's not really worth it?
Or do you that AJA I/O to edit the pro res video with the mbp?
Also, I looked into the eSata external drives to use the mbp, but when I checked out the specs on G-tech, the pdf comparison for speeds between esata and firewire 800 was miniscule. Isn't esata supposed to be much faster than firewire?

You can most definately edit ProRes on a MacBook Pro. FW800 RAIDED drive would be required for this, like the G-Raid, FirewireVR, LaCie D2. However, eSATA is faster and MUCH better. I don't know where you got your numbers for FW800-eSATA comparison, but if they are single drives, eSATA is 20MB-40MB/s faster. Get Raided drives and it is VASTLY different. 75MB/s for FW800 Raid 0 hardware raided drives (G-Raid) vs 140MB/s eSATA (S2VR Duo).
I can edit ProRes with my Powerbook G4 laptop...I just can't capture it.
And with the I/O HD, you have the perfect remote ProRes setup...and because it is a Firewire capture device, you must have an eSATA drive...well, you can get a firewire card, but eSATA is much better.
Shane

Audio hardware interface to use with Logic Studio 8 and Pro Tools M-Powered

I want to get Logic Studio and Pro Tools M-Powered. I do film sound design and music as a hobby. I plan to compose music with Logic and edit film audio with Pro Tools.
Here is my main concern:
I want to get ONE firewire audio interface that will work with both programs (Logic Studio and Pro Tools). I need one that has multiple outputs because I will be mixing in surround sound (mostly the film audio). Are there any suggestions? Inputs on what people like, don't like, work well with both? What I should completely avoid? I figured Pro Tools M-Powered (as opposed to LE, HD) would be better for me simply because of price and possibly using the m-audio interface with Logic too.
Let the advice begin please. I will be happy to answer any questions you have for me that would help you provide better advice for me.
Thank you in advance
TTW13

Yes, Logic Studio is surround sound capable, but unfortunately a lot of places that I would potentially like to be working at, that do audio post, that I've seen, require a knowledge of Pro Tools. I know it's not the best but it's the industry standard and it's what many companies use so I need to learn it (basically). I don't want to limit myself to stereo outs on the audio interface on PT. Maybe I should to keep my budget down though??? I guess now I'm looking at PT LE and the 003 family, this one in particular
http://www.digidesign.com/index.cfm?langid=100&navid=126&itemid=5028
I dunno, by the time it's "technically" compatible with Leopard I might be able to afford it.
Anyone currently using Pro Tools LE with Leopard right now? For some people it apparently works???

Pro Tools DAE Questions w/ Logic

1 - Are you able to use instrument tracks when running logic on Pro Tools DAE? When I try to create one in that situation, the option is greyed out.
2 - Is there somewhere in the global preferences in logic where you can set up your i/o? I need to be able to change the output settings manually (for example, as opposed to 1-2 being grouped together always...)
Many thanks to anyone who can shed some light.
Thanks!
Mac OS X (10.4.9)

"Core Audio" Instruments "talk" to DAE thru Direct
TDM,
You need to enable direct TDM for them to work with
DAE....do this in audio hardware...
I don't have DAE system in front of me, if I remember
correctly you make them DTM objects,instead of core
audio objects, (which you set in instrument
parameters).....you set the outputs to DTM outputs,
then you create a aux in DAE which has a DTM input
and a DAE output, which is how you route them into
the DAE....
I may be forgetting something, but this will get you
close..
Okay, cool. I will try that, thank you!
So I need to turn on both DAE & TDM in audio hardware setup?

Logic 7.1 and Pro Tools...a few questions...

Hi everyone,
I just have a couple of questions regarding Logic and Pro Tools. My employer has commissioned me to upgrade his studio from Logic 5.0 (mac os version) to the latest version, which is now 7.1.1 (but we may stick with 7.1 just till I'm sure it won't mess up his setup). I thought I'd post just to get a bit of clarification.
Here are the details of his main theatre studio:
Pro Tools 6.4.1
2 x Digidesign 888 I/O Interface
OS X Panther 10.3.5
Dual 1.25 GHz G4
1 Gig DDR SDRAM
I've read and seen a lot of posts regarding big problems running Logic and certain configurations of Pro Tools in conjunction, however until now this has not been a concern for me as my studio is purely based off of core audio Logic 7.1 and Reason 3.03. So here are the main questions I have:
1. How much is the upgrade going to be? Is is just the standard upgrade or is he going to get shafted and have to buy the whole program again (NOTE: he does have the dongle and all the necessary paperwork from Logic 5.0 mac version)
2. Are there known problems with the configuration that I've outlined above, I really don't want to suggest he go ahead and a) upgrade b) buy the the program again if he must, if there is going to be a problem, he predominantly works in Pro Tools and Logic will just be available as an added selling point to his studio, and composition ablity.
Any information about this or clarification would be greatly appreciated, thank you in advance,
Graham Campbell
PS - if you need more info to answer don't hesiate to ask.

Hi Justin,
thanks for the advice/info...I got the quote for the upgrade it'll be 435 Canadian after tax (Just curious if we order the upgrade will it upgrade to 7.1? or do we need to get that seperate, I was confused by your wording).
As for the setup my employer hasn't used Logic at all in a professional setting. He had 5.0 Platinum in case any of his clients needed it however that hasn't been the case, he said it was working fine though. As for Pro Tools, his setup the one I mentioned above, has been rock solid all the way up to 10.3.9 (which he has on two of his other editing sweets). So hopefully that will be the case for Logic as well. I've told him that I think he'll need to address the RAM issue as I'm sure he'll be suprise how quick Sculpture etc eat up the RAM.
My main concern was wether running Logic not using the 'built in audio' driver but rather say the Pro Tools interface would be incompatible, hope that makes sense I haven't done any Pro Tools with Logic set ups before so the wording may wrong. Thanks for the reply though, cheers,
Graham

How Do You Work Your Logic Files In Sonar and Pro-Tools?

Hey guys, it's my 1st post. I have a MB Pro and Logic Pro 8 and I'm going to be working in a studio that has Sonar and Pro-Tools in another room. I'm going to be doing my pre-production with my MB Pro and then do the mixing in Sonar because the acoustics is bad at home. How do I proceed thus? In what format do I save my Logic File in order to be opened in Sonar and Pro-Tools? Can Sonar read Logic files? Can Pro-Tools read Logic too?

Hi, if >download Additional Content< is still available, then select it and Logic will attempt to download everything needed. If there's no activity then you're done and if something went wrong, on your network for instance, you'll receive an alert stating otherwise I suppose.
Have a nice day!

Logic studio 9 and pro tools 8 le users

Hello,
I wanted to write this on the logic pro page too. I wanted to know how was the transferring of midi and audio files from Logic 9 to pro tools le. I have both logic and pro tools but have not done it yet. I am still new.
I am recording songs for my friend and he is going to be taking them to be mixed in a big pro tools studio. He wanted to save money and time with me before he went there and get the basic tracks worked on.
My question is, has anyone transferred files to pro tools that can help me (and even to other DAW's) And what transfers well and not so well to pro tools 8 le.
Lou

To transfer files from Logic to PT or any other DAW for Mixing, it is unlikely you will be asked to transfer MIDI files/regions. There's no guarantee the studio will have the same instrument plugins to playback your MIDI parts.
You need to bounce down each track to separate audio files. Use the File > Export all audio tracks to export every track to a separate audio file which will include only the basic volume and pan automation.
You could choose to bounce each track individually (solo track, File > Bounce)
Bounce in the same sample rate (44.1 for example) and bit depth (24bit for ex.).
Start the bounce at the beginning of the track (1 1 1 1) - or so all tracks have the same start point regardless of whether the drums come in on Bar 9 for example.
Bounce to wave or aiff - whatever the studio prefers.
JF

Logic Pro 8 and Pro Tools are not getting alone with my MacBook Pro

Hello,
I have a MacBook Pro with Intel. I have Pro Tools 7 and Logic Pro 7. I just upgraded to Logic Pro 8. We had to update our quicktime and import our key commands into Logic Pro 8. However, now Logic Pro 8 keeps freezing and Pro Tools wont open.
Can anyone help

I had this problem. you need to download and install something called a prebinding script from digidesigns website. just google search osx, and prebinding script. If your PT icon just keeps bouncing in your dock and does nothing this should fix it.
maybe someone can tell me why i can only create external midi tracks in logic>??? no software inst....

Logic and Pro Tools

Hello all. I"ve got a few questions concerning Logic and Pro Tools. First, can you trigger Logic's sounds in Pro tools? ie Logic as the "slave" and Pro Tools as the "master" And can you record vocals into Logic using an MBox 2 or is there some other interface I need? If so, what would you suggest?
Thanks in advance for your time

You can use an Mbox2 with logic. If you already have pro tools, or plan on having it in addition to logic, thats what I would do, as both programs can use the mbox2. Although, they can't both use it at the same time. Which leads to this.
It is possible to have pro tools running using the mbox2 while logic is running, using your computers soundcard. I have done this, but I have found no real way to synch them. I've been looking at ways of syncing Logic and Pro Tools together on the same computer, and it seems to be not really doable, although I believe people have done it. A lot of people have one computer for Logic and one for Pro Tools and sync them together with time code, which works really well.
I'm really pretty new to logic, so I'm sure I dont have the best answers,
Good Luck!

Logic Pro and Pro Tools DAE

Similar Messages

Maybe you are looking for