Logic Pro and Resolume (OSC/Midi out)

Hi Everyone
Im looking for a way to get my Logic Pro X to talk with my Resolume Arena 4 on the same computer.
What i need is for LPX to send midi outputs to Resolume Midi inputs.
I have found a lot of tutorials on this for Ableton Live and Resolume but i cant seem to figure out the Midi out on LPX?
Does LPX use OSC? It seems its the prefered input for Resolume?
Is there any other way around this? Could someone point me to where to study up on this it would be helfull!
ps. i am also posting this on the resolume forum to see if they can help.
Thanks
/ Janne

pg-2007 wrote:
When I try and record my Korg R3 in Logic Pro I get background noise from the MIDI-Out.
What sort of noise? Soft clicks?
When connecting the R3 via the USB interface to LogicPro I am able to use is as a MIDI controller to play the software instruments. When I then try and record the R3 via Alesis Linelink I get background noise. If I disconnect the Korg/USB the noise goes away.
I thought that this was something to do with the R3 so I connected it to my MacBook Pro/Logic via EMU Xmidi interface that links a USB interface to a MIDI/In/Out. I got the same noise issue when using the EMU until I disconnected the EMU MIDI/Out to the Korg MIDI/In.
I also get the same symptoms when using Garageband. Not sure if this is a USB/MIDI driver issue or config problem
From what you say here it seems the R3 IS the problem. When you disconnect it the noise goes away. And it produces noise in the same way on a different machine with a different MIDI IF - that would rule out driver issues as far as I'm concerned, unless both drivers exhibit the same mistake... very unlikely. I think you need to ground the R3.
Does the recording (via the LineLink) actually contain the noise? Or is it clean?

Similar Messages

  • Logic Pro and Mainstage Bombing Out

    I have a copy of Logic Studio 9 installed on my Late 2011 MacBook Pro.  Everthing except Logic Pro and Mainstage 2 launch and work perfectly.  When I click on Logic Pro, it just bounces in the dock a few times and quits out with an error dialog.  Mainstage 2 launches to the loading page and then stalls.  I have tried deleting Logic Pro and Mainstage and reinstalling from my discs, they still don't work.  The thing is after the first installation attempt, the installer does not ask me for the serial number anymore.  What should I do?  I really need to use Logic Pro.

    Did you run "Software Update" to get the latest version?

  • In Logic Pro 9, how many midi controlled software instruments do you get...?

    In Logic Pro 9, how many midi controlled software instruments do you get and is there possibility to download more as it says 40 on the programs info on the Mac Store, as i intend to compose on it but with only 40 instruments it's not really worth it.
    So i was just wondering whether it let you download more for free.
    Thanks for reading
    ~Matt

    Yes: I too am interested in the software instruments available in Logic Pro: one has to be a bit wary of the jam packs because there don't seem to be many solo instruments included. But I looked at the Logic screen in an Apple store the other day, and it worked like GarageBand in
    this respect: you created a new track choosing the software instrument option and a whole lot of instruments came
    up in a column on the right: lots of solo wind instruments, plenty of keyboards and guitars of course and not very many solo strings, only one violin, in the world music subsection under Irish fiddle. Yehudi Menuhin
    where are you when we need you?
    What I've been trying to find out is which part of the purchase does this long list of software instruments arrive with, because it's basically the only reason
    I'm interested - I get on fine with gb but it
    Just hasn't got enough instruments, and as I say the jam packs don't seem
    to resolve this ? Or do they? Could someone please help
    me with this?

  • So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Logic Pro has detected a MIDI timeout.

    "Logic Pro has detected a MIDI timeout. Please restart your computer, then relaunch Logic Pro.
    If the problem persists, update the drivers of all connected MIDI devices (including audio drivers with MIDI functionality) to the latest version. For instructions on removing older drivers, consult the manufacturers' documentation."
    This is what ive been getting since i updated ato Logic 9.1.7 yesterday and also installed the latest Protools DIGI 02 Drivers for OSX lionthis weekend in ATL and WEST palm Beach thanks much....

    i dont have any digi or mbox drivers in my system, but have the same problem. song ist frozen .. anybody have a suportive link???

  • Audio Issue - Using Logic Pro and iMovie to Create Movies for Youtube

    I am trying to use a combination of Quicktime, iMovie and Logic Pro 9 to create videos of me playing/singing songs to post on Youtube.  Before I can ask the question, I think it would be best to briefly explain my process, so here's one example:
    One thing I try to do is video myself playing piano and singing at the same time.  What I do is open up Logic Pro and load my piano sound and arm an audio track that my microphone is plugged in to; I also go to "System Preferences" and click on "Sound" and make sure that my audio interface is selected for the input method.  Then, I open up Quicktime and select "New Movie Recording".  Finally, I open up my software for my interface and set it up for "loopback"...there's a picture below.
    If you look at the bottom of the interface, you'll see it says "DAW 1: Loop Back 1" and "DAW 2: Loop Back 2".  Ideally, this means that whenever I start recording in Quicktime, all of the sounds that I am making in Logic (the piano playing and the singing) will loop back into the computer and be recorded by Quicktime.  This does actually happen, but my question is this:
    I've noticed that the sound quality of software instruments is drastically reduced once they have been recorded by Quicktime (or iMovie) and I play the movie back.  Actual audio files, like me singing or playing a real instrument aren't really affected, but for some reason the software instruments sound very thin once I listen to the audio in the movie.  Why is this happening?  Is there a way to preserve the audio quality to be the same during video playback as it is when I am playing the instruments live in Logic?

    Interesting and convoluted way to get something done.. from what you're describing it almost sounds like the software instruments are somehow getting recorded twice but slightly out of phase.
    When you record your singing are you monitoring through headphones or speakers?

  • Logic pro and mainstage essential content installing problems

    for 2 days now I have had Logic pro and mainstage essential contend down loading in a greyed out box with a moving stripy line in the centre, clearly it is downloading something but for 2 days? how can I get rid of it.

    Thank you for the info I appreciate it!  Was also wondering if the Drummer content downloads faster from Logic Pro X than from Garageband as the Drummer content downloads rather slowly from Garageband. And was figuring that since Logic Pro X is more expensive than Garageband perhaps the servers they use for Logic Pro X would be more faster than Garageband's but I'm just taking a wild guess

  • Audio Unit Problem with Logic Pro and Mainstage

    When I go to launch my apps, both Logic Pro and Mainstage get stuck loading an AppleAUspeechsynthesis or something along those lines. It never makes it past there and I either have to force quit or it quits itself. I can press control while launching Logic Pro, but then I only get basic MIDI. I just tried an archive and install and I'm in the process of reinstalling Logic Pro right now. Does anyone know what might be causing this?

    I just tried pasting my crash report. It seems like it is too long to post?

  • TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

    Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

    Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
    Have a nice day!

  • Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

    Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

    Hi Kurt,
    The Mac IIci is not even powering on at all. Tried again with wih a tested power cable and no luck. 
    I think it's best that take  this issue to the Older Hardware Community. Not only did I see a fair number of replacement parts for the IIci avaiable online, but there also vintage external floppy drives as well. I'm not giving up.
    Thank you for your time and interest in helping.

  • Is macmini enough for a musician that works with logic pro and 10 plugin softsynth at the same time?

    I use to work with a music platform like garageband or logic pro and at the same time I am working with a lot of plugin software like toontrack, ik multimedia, musiclab, native instruments etc. On my PC which has the same specification as macmini i7 2.3GHz this was a big problem especially when I was selecting effects like reverb, chorus or compressor so I had to export tracks all the time. What is the minimum specs that I should have to work without any problem? Any help will be appreciated.

    Welcome to Apple Support Communities
    For what you want the Mac, the Mac mini is OK. It has got a quad-core processor that will give you the performance you need and 4 GB of RAM that you can extend to 16 GB, apart from a removable hard drive.
    The problem is the GPU, but as the applications you are going to use don't require the best GPU, it will work properly. If you want the Mac mini, go for it. An iMac may give you better performance, but the Mac mini is correct.
    If you buy it from Apple, you have 14 days to return the Mac mini if it doesn't work correctly with the apps you need

  • Will Lion work ok with Logic Pro and 3rd party plugins?

    Will Lion OS work ok with Logic Pro and 3rd party plugins?
    Any help would be much appreciated,
    Regards James

    Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
    I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
    Both Sylenth and Vanguard are 32bit plugins...
    ...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

  • Downloaded Logic Pro and won't run

    Downloaded Logic Pro and won't run. Keeps telling me couldn't open due to a problem. It says to update my software or reinstall it but it' won't let update it neither.

    Bought the software in app store, installed it and it just won't run. I have OS X 10.6.8 just donwgraded from lion and safri wouldn't work either since.
    The error window tells me maybe I should re install the program or update my software. I've done both, donwloaded the upgrade (Logic pro 9.1.7) and the install helper keeps telling I can't updrade my software like that. I need to chek for actualization through my computer. But the computer actualization finder "thingy" won't find more softaware to update.
    This are the details shown in the error report: (I don't understand any of it)
    Process:         Logic Pro [372]
    Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
    Identifier:      com.apple.logic.pro
    Version:         ??? (???)
    Build Info:      Logic-17005700~2
    App Item ID:     459578486
    App External ID: 6130764
    Code Type:       X86 (Native)
    Parent Process:  launchd [119]
    Date/Time:       2012-04-17 08:24:13.051 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          25851 sec
    Crashes Since Last Report:           2589
    Per-App Crashes Since Last Report:   6
    Anonymous UUID:                      EDA52A61-88BE-4D83-8D14-5CB718D2D6EB
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia
      Referenced from: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    Please help!! and thanks

  • Should I just keep Logic Pro and forget Pro X for now? ...

    Should I just keep Logic Pro and forget Pro X for now?
    Have Mavericks.
    Have not been recording/using Logic since getting Mavericks, but getting ready for new projects.
    How is old Logic Pro (not X) working with Mavericks? And X?
    Are the upgrades in X worth the hassels I'm reading about on this forum?
    Lena

    As long as you have Logic 9.1.8 it will run fine under Mavericks. If there is no impending need to go to Logic X then don't bother. Updating for the sake of it when everything is working ok is not something I do. I only went to logic 9 from 8 about 7 months ago. Had the box install of 9 for a couple of years before moving to it because I had no need.
    If you do decide to go to Logic X make sure you have 64bit versions of any 3rd party plug-ins.
    There are some good features in Logic X but do you need them and do you need to move?

  • What's the best audio interface for Logic Pro and Mac?

    What's the best audio interface for Logic Pro and Mac?

    Depends on the computer model and if you have unlimited funds.

Maybe you are looking for