Logic Pro and TouchOSC--which version is stable ?

I run a super stable Logic 9.1.1 and OSX 10.6.3 setup.
I got TouchOSc last nite and played with Ableton Live.
Logic supports TouchOSC starting from 9.1.2
Am a bit weary of updating in case something goes wrong.
The only update available on Apple is the current 9.1.5 version.
I don't want to update the OS, just want to get Logic working with TouchOsc....
Please advise......
Thanks

999699 wrote:
Hi Andre.
Many thanks for a quick reply!
I'm leaning to 11g, but the issue is that i'm installing onto a 32bit Red Hat server, and I can;t see any 32bit Linux binaries anywhere.
Do you know if there are any, or has that platform not been targeted for 11g?
Preferably, I'd like to avoid 10g if it's possible, but that is looking less likely at the moment.
Good call on the Apex version though - I shall grab that now :)
Regards, AlexUnfortunately XE 11G was not released for 32 bit linux for some reason.

Similar Messages

  • I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???

    I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???

    That is Pages for iPad v2.0, which Pages '09 v4.3 can't read.
    You need to either stick with the older version of Pages on the iPad or get Pages 5 for the Mac which is only available if you are running OSX 10.9 Mavericks.
    Unfortunately that is not the end of your woes because Apple has made iCloud convert the files to Pages 5 now, and Pages 5 has over 90 features deleted on top of doing a shocking job of converting older Pages files.
    Peter

  • Logic Pro 9 (9.0.0).   Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0.   I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

  • Is there a difference between Logic Pro and Logic Pro X?

    Maybe this is a stupid question, but is there a difference between Logic Pro and Logic Pro X?
    Already thx!

    Hi
    Short answer: No
    Longer answer:
    Logic Pro X is the latest release version of the DAw known as "Logic Pro". Previous versions were: Logic Pro 9, Logic Pro 8 etc.
    There was also a "Logic Express" (no longer available) which, though similar to Logic Pro, was missing a few features of Logic Pro in it's later versions)
    This might add more details:
    http://en.wikipedia.org/wiki/Logic_Pro
    CCT
    edit
    AoS wrote similarly
    There you go then :-)

  • TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

    Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

    Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
    Have a nice day!

  • Is macmini enough for a musician that works with logic pro and 10 plugin softsynth at the same time?

    I use to work with a music platform like garageband or logic pro and at the same time I am working with a lot of plugin software like toontrack, ik multimedia, musiclab, native instruments etc. On my PC which has the same specification as macmini i7 2.3GHz this was a big problem especially when I was selecting effects like reverb, chorus or compressor so I had to export tracks all the time. What is the minimum specs that I should have to work without any problem? Any help will be appreciated.

    Welcome to Apple Support Communities
    For what you want the Mac, the Mac mini is OK. It has got a quad-core processor that will give you the performance you need and 4 GB of RAM that you can extend to 16 GB, apart from a removable hard drive.
    The problem is the GPU, but as the applications you are going to use don't require the best GPU, it will work properly. If you want the Mac mini, go for it. An iMac may give you better performance, but the Mac mini is correct.
    If you buy it from Apple, you have 14 days to return the Mac mini if it doesn't work correctly with the apps you need

  • Will Lion work ok with Logic Pro and 3rd party plugins?

    Will Lion OS work ok with Logic Pro and 3rd party plugins?
    Any help would be much appreciated,
    Regards James

    Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
    I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
    Both Sylenth and Vanguard are 32bit plugins...
    ...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

  • Downloaded Logic Pro and won't run

    Downloaded Logic Pro and won't run. Keeps telling me couldn't open due to a problem. It says to update my software or reinstall it but it' won't let update it neither.

    Bought the software in app store, installed it and it just won't run. I have OS X 10.6.8 just donwgraded from lion and safri wouldn't work either since.
    The error window tells me maybe I should re install the program or update my software. I've done both, donwloaded the upgrade (Logic pro 9.1.7) and the install helper keeps telling I can't updrade my software like that. I need to chek for actualization through my computer. But the computer actualization finder "thingy" won't find more softaware to update.
    This are the details shown in the error report: (I don't understand any of it)
    Process:         Logic Pro [372]
    Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
    Identifier:      com.apple.logic.pro
    Version:         ??? (???)
    Build Info:      Logic-17005700~2
    App Item ID:     459578486
    App External ID: 6130764
    Code Type:       X86 (Native)
    Parent Process:  launchd [119]
    Date/Time:       2012-04-17 08:24:13.051 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          25851 sec
    Crashes Since Last Report:           2589
    Per-App Crashes Since Last Report:   6
    Anonymous UUID:                      EDA52A61-88BE-4D83-8D14-5CB718D2D6EB
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia
      Referenced from: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    Please help!! and thanks

  • Should I just keep Logic Pro and forget Pro X for now? ...

    Should I just keep Logic Pro and forget Pro X for now?
    Have Mavericks.
    Have not been recording/using Logic since getting Mavericks, but getting ready for new projects.
    How is old Logic Pro (not X) working with Mavericks? And X?
    Are the upgrades in X worth the hassels I'm reading about on this forum?
    Lena

    As long as you have Logic 9.1.8 it will run fine under Mavericks. If there is no impending need to go to Logic X then don't bother. Updating for the sake of it when everything is working ok is not something I do. I only went to logic 9 from 8 about 7 months ago. Had the box install of 9 for a couple of years before moving to it because I had no need.
    If you do decide to go to Logic X make sure you have 64bit versions of any 3rd party plug-ins.
    There are some good features in Logic X but do you need them and do you need to move?

  • Logic Pro and Mainstage Bombing Out

    I have a copy of Logic Studio 9 installed on my Late 2011 MacBook Pro.  Everthing except Logic Pro and Mainstage 2 launch and work perfectly.  When I click on Logic Pro, it just bounces in the dock a few times and quits out with an error dialog.  Mainstage 2 launches to the loading page and then stalls.  I have tried deleting Logic Pro and Mainstage and reinstalling from my discs, they still don't work.  The thing is after the first installation attempt, the installer does not ask me for the serial number anymore.  What should I do?  I really need to use Logic Pro.

    Did you run "Software Update" to get the latest version?

  • I got logic pro and i was wondering if possible paying a little less for an upgrade!! or do i have to pay the full price for the pro x?!!!

    I got logic pro and i was wondering if possible paying a little less for an upgrade!! or do i have to pay the full price for the pro x?!!!
    Or if apple would work around this some way or another?

    If you bought Logic 9 less than a month ago then Apple will most likely refund you so that you can buy Logic X instead.
    The full (only) price of Logic X is as staed on the App Store. This price (whether people agree or disagree, like it or not like it) is still less than any upgrade price for any other DAW.
    A lot of people here are saying they bought Logic 9 6 months or a year ago and want a cheaper price. For me, I started on Logic 5.5. Logic 6, you could pay an upgrade price that was way over what the full app is now but you had to add costs as things like Space Designer were extra. Their serial numbers, once purchased, got added to you XS Key, which was a dongle that never got hacked in 6 and a half years.
    Apple, on acquiring Emagic, dropped the price from $1000 to $499, included all the things you had to pay extra for then dropped the price to what it is now once they went over to the App Store. They also dropped the un-cracked dongle.
    So myself and a lot of other people here went 5.5 to 6 (added the goodies that were extra) to 7 to 8 and to 9. When there was an upgrade price, the price was around what the app is now.
    I'm amazed at how many people see this as a full price and want money off whereas in reality a complete piece of softwaser is being offered for an upgrade price.
    My first paragraph will answer your question and you probably won't care about the rest of the post. $199 or £139 IS an upgrade price.

  • So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

    Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

    Hi Kurt,
    The Mac IIci is not even powering on at all. Tried again with wih a tested power cable and no luck. 
    I think it's best that take  this issue to the Older Hardware Community. Not only did I see a fair number of replacement parts for the IIci avaiable online, but there also vintage external floppy drives as well. I'm not giving up.
    Thank you for your time and interest in helping.

  • Audio Issue - Using Logic Pro and iMovie to Create Movies for Youtube

    I am trying to use a combination of Quicktime, iMovie and Logic Pro 9 to create videos of me playing/singing songs to post on Youtube.  Before I can ask the question, I think it would be best to briefly explain my process, so here's one example:
    One thing I try to do is video myself playing piano and singing at the same time.  What I do is open up Logic Pro and load my piano sound and arm an audio track that my microphone is plugged in to; I also go to "System Preferences" and click on "Sound" and make sure that my audio interface is selected for the input method.  Then, I open up Quicktime and select "New Movie Recording".  Finally, I open up my software for my interface and set it up for "loopback"...there's a picture below.
    If you look at the bottom of the interface, you'll see it says "DAW 1: Loop Back 1" and "DAW 2: Loop Back 2".  Ideally, this means that whenever I start recording in Quicktime, all of the sounds that I am making in Logic (the piano playing and the singing) will loop back into the computer and be recorded by Quicktime.  This does actually happen, but my question is this:
    I've noticed that the sound quality of software instruments is drastically reduced once they have been recorded by Quicktime (or iMovie) and I play the movie back.  Actual audio files, like me singing or playing a real instrument aren't really affected, but for some reason the software instruments sound very thin once I listen to the audio in the movie.  Why is this happening?  Is there a way to preserve the audio quality to be the same during video playback as it is when I am playing the instruments live in Logic?

    Interesting and convoluted way to get something done.. from what you're describing it almost sounds like the software instruments are somehow getting recorded twice but slightly out of phase.
    When you record your singing are you monitoring through headphones or speakers?

  • What's the best audio interface for Logic Pro and Mac?

    What's the best audio interface for Logic Pro and Mac?

    Depends on the computer model and if you have unlimited funds.

Maybe you are looking for