Logic Pro Forum Error
See attached pic (time is now 2:05 PST)
The problem is persisting, hence my post. Thanks.
!http://www.score2picture.com/L9pix/errorf.png!
Indeed!
Thanks for your reply, Eric.
Regards,
-=iSchwartz=-
Similar Messages
-
Logic Pro audio error 10011 (drop out)
I bought a new mac mini yesterday that meets all requirements for Logic. I bought it to run Logic as a dedicated machine linked to a keyboard. Apart from the basic software that came with it, Logic is the only software installed on it. Installed it after I did all the updates. Aiport & bluetooth is now turned off, and I don't have it hooked up to a network.
Brand new, 10.6 factory fresh system, 2gbs ram and 91 GB of pure virgin hard drive space. Doesn't get much cleaner than that.
And it wont run the demo songs without the audio error..... and these are their demos!!! I really doubt they would choose demo songs that are too complex to play, so why the errors?
I tried running through the demos and re-running them. This did help, but one demo is still bawking half way through.
This just does not make sense to me. Is there something I'm missing? I am new to Logic Pro, moving up from garageband. Not sure if this:
'System Overload.The audio engine was not
able to process all required data in time.
(-10011)'
is this what many here refer to as ' dropping out'?
Help!!!!
(ignore Model and machine listed below -different machine)Hi,
Thanks for your replies. I did move demos to the Hard drive (found out that the hard way!)
The thing is the mini is to be used exclusively for music, and is hooked up to a pro88 midi keyboard. 90% of the time it will be used for Mainstage, with some editing in Logic.
It sure does a fine job with GarageBand - no issues there.
My main machine is a MacPro, and I have three other (older) iMacs. So I really didn't want to spend more than I have to. As the Mac will be only used for music and nothing else (not even internet etc.) I was hoping that it would be up to the task of running Logic, as it does meet the needed specs.
My worry is that moving up to a iMac (which would almost double my investment to $1300) might not necessarily do much. I am not willing to dedicate a big machine like a MacPro to the task -way too expensive for my budget.
So.... being new to Logic, is there a chance settings are the culprit. Is current practice to work on a few tracks, and freeze them, then continue to add new tracks? Or is it more common to leave everything un-frozen when working on stuff?
Options I am aware of are:
•Freeze tracks
•Buffer size set to 1028
anything else?
If the mini is not fully up to the task, would the low end iMac really be any better? or will it to be not up to the task either, in which case there is no point shelling out more. From what I have read, the even the biggest machines stumble from time to time.
Thanks again for your input, I do value it! -
Just read the Logic Pro forum. People there think it stinks!
I for one do too.
you took a tool that worked and did the typical apple "buy now, works later" approach. seriously. could you please not waste my time with beta testing unless you pay me!Hi Folks,
I paid the money a while back to buy Logic Pro X from the App Store and never installed it because the App Store wouldn't let me. I currently have a working install of Logic Pro 9 on my Mac. When I try to download the new version, the button in the App Store is ghosted out, and it says that Logic Pro Xhas already been installed.
I'm assuming that this has to do with existing folder names. I had a similar problem with Final Cut Pro 7 (which I had to keep in top shape to continue work with editors on our legacy FCP7 video projects) when I moved to FCPX. It was a fairly simple process to group FCP 7, as well as the other FCP Studio 3 programs, and put them into a directory called Final Cut Studio 3. The big caveat was to NEVER update any of the Studio 3 programs again, because updated FCP 7 library items would end up the the FCPX libraries.
My question is this: has anyone had success by renaming the Logic Pro 9 application folder (which is currently named Logic Pro) as Logic Pro 9 and proceeding with the Logic Pro X install (which I assume will create a folder called Logic Pro?) Additionally, I am looking for advice about whether I need to do anything with the existing Logic Pro 9 libraries.
Thank you,
KimK -
Sticky proposal: Logic Pro (first draft)
Ok, here's a first draft of the proposed sticky for this forum. After looking at what we had, I decided to basically do it in four parts - introductory stuff (please post version numbers etc), problem solvers, tips, and audio general stuff.
I'm not making this a work of art, but value feedback in order to make this useful before we ask the mods for a sticky. It's not complete, such a task is a much bigger job, but it's a start. What's not there? What's confusing? Is it too much stuff? Too newbie unfriendly?
When we are happy I will probably style/format it a little better as well.
Lemme know - cheers,
This is a compilation of Logic tips, useful threads and information for Logic Pro users, compiled mostly by Eriksimon (thanks!) with additional contributions from Bee Jay and (final forum member list to be completed)
- Getting the best help from the Apple Logic Pro Discussions
This forum is intended to be a user-to-user support form to users of Logic Pro.
Please keep your posts on the topic of Logic Pro, or you risk your post being removed for being off-topic. There are plenty of other general audio and recording forums better suited for asking general audio questions.
Questions about third-party software and hardware are welcome as long as they relate directly to using these products in conjunction with Logic.
This forum is dedicated to the post-Apple versions of Logic, which means questions for Logic Pro 7, Logic Pro 8, and Logic Pro 9 are welcome. However, please include the version of Logic you are using, in order to give useful advice (as things change between versions.) Better still, put your Logic versions and system information in your signature, to save having to ask for it.
If you are a user of Logic Express, you should post in the Logic Express forum, rather than the Logic Pro forum, in order to get advice suited to your particular software version (as some things are different between Logic Express and Logic Pro).
Remember that many questions, especially if you are new to Logic, have been asked multiple times before, so it's good practice to use the Discussions Search feature in the top right of the page to search for previous discussions relating to your issue. You will find a wealth of information. Often you can find a solution to your question without needing to post and have someone type out a response they've already typed out hundreds of times before - or worse yet, have your question ignored.
Please be respectful of the members on the board at all times - we are happy to help people out, but do so in our own free time and don't have a duty to do so.
Posts discussing non-Logic related items, off-topic or controversial subjects, abusive posts and harsh language are not welcome and will likely be removed, as will posts discussing illegal software. Please read the Terms of Use of this board for more info at:
This post is a user-contributed compilation of links to content on this forum, official Apple documentation, and occasionally some other outside content where useful to Logic users. It is not in itself an official Apple document, and Apple do not take responsibility for it's content. It is not intended to be complete or comprehensive, just a helpful start for common issues.
Logic feature requests and feedback to Apple Logic team:
http://www.apple.com/feedback/logicpro.html
- General Help, Issues, Errors & Troubleshooting
Logic Pro 8 (*probably also for Lo9ic): Troubleshooting Basics
http://support.apple.com/kb/HT2375
Logic Pro, Logic Express: Remove Audio Unit plug-ins to troubleshoot issues (9?)
http://support.apple.com/kb/HT2852
Logic Pro, Logic Express: Spinning disc cursor after recording
http://support.apple.com/kb/TA24239
Logic Pro/Express 8 - Logic seems to stop responding (hang) while "Searching for Audio Unit plug-ins" when starting up (9?)
http://support.apple.com/kb/TS1086
Logic 9 (and all other LS2.0 apps) crashing on startup, other Logic Studio apps as well. Solutions:
http://discussions.apple.com/message.jspa?messageID=9879826#9879826
http://discussions.apple.com/message.jspa?messageID=9907434#9907434
Corrupted Plug Ins and a possible solution:
http://discussions.apple.com/thread.jspa?threadID=1912373&tstart=0
Delete AU cache - problems with invalidated Plug Ins:
http://discussions.apple.com/thread.jspa?threadID=1856107&tstart=0
How to open songs from Logic 4 or earlier (L7 + L8 needed)
http://support.apple.com/kb/HT3612
Why do you get 'kernel panics'?
http://discussions.apple.com/message.jspa?messageID=9954472#9954472
Logic Pro 8, Logic Express 8: Cannot select USB mic as an audio input
http://support.apple.com/kb/TS2648
Logic crashes: MelodyneRewireDevice or MelodyneBridge or Rewire need an update.
http://www.celemony.com/userforum/viewtopic.php?p=9807
Logic or GarageBand may quit unexpectedly when starting with Mac OS X 10.5 Leopard if Melodyne is installed
http://support.apple.com/kb/TA25071
Links/RSS feed of all Apple support docs released the past year concerning Logic Studio apps:
http://rss.support.apple.com/logic
Logic Pro/Express 8: Error when bouncing files with normalize checked (9?)
http://support.apple.com/kb/TS1094
Logic Pro/Express 8: Converted Apple Loops play in different key and tempo than expected (9?)
http://support.apple.com/kb/TS1283
Logic Pro/Express: Freeze cursor appearance prevents Audio Instrument track editing (9?)
http://support.apple.com/kb/TA23365
Logic Pro, Logic Express: Instrument not triggered as expected (9!)
http://support.apple.com/kb/TA22915
Logic Pro 8: Missing content after install:
http://discussions.apple.com/message.jspa?messageID=6602988#6602988
Logic: Dense clusters of automation nodes can cause audio to stutter
http://support.apple.com/kb/TS2139
Logic: Rebuilding the Loop Index
http://support.apple.com/kb/HT3443
Solutions for noise in the audio signal
http://support.apple.com/kb/HT2743?viewlocale=en_US
Logic Pro, Express: Solo Safe mode may not remain disabled for a particular channel strip
http://support.apple.com/kb/TS1939
Logic Pro/Logic Express: Error while trying to sync Audio and MIDI
http://support.apple.com/kb/TS2111
Logic Pro 9: Number of recent items sometimes resets to 10
http://support.apple.com/kb/TS2810
Logic Pro 8, Logic Express 8: ReWire inputs in existing projects may shift unexpectedly
http://support.apple.com/kb/TS2466
FAT32 disks
Message: I/O ERROR RESULT -36
Beachball when recording
http://discussions.apple.com/thread.jspa?threadID=2053469
http://discussions.apple.com/thread.jspa?threadID=1940763
Logic: Resetting MIDI Drivers
Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
http://discussions.apple.com/thread.jspa?threadID=1989370&tstart=0
Logic Pro: EVB3 Organ Instrument does not play
http://discussions.apple.com/thread.jspa?messageID=7344356�
Logic Pro: Inserts disappear from output channel strips
http://discussions.apple.com/thread.jspa?messageID=6796713
Logic 8: Where is the Tutorial DVD mentioned in the manual?
http://discussions.apple.com/thread.jspa?messageID=7401134�
Logic: If new AU plugins don't show up, reset AU cache
http://discussions.apple.com/thread.jspa?messageID=6247833�
Logic 8: Remove serial number / license
http://discussions.apple.com/thread.jspa?messageID=5636506�
Logic 8: Logic only runs when XSkey is connected
http://support.apple.com/kb/TS1106
Logic 8: Hybrid Morph missing
http://discussions.apple.com/thread.jspa?messageID=6289860
- General Logic Useful Tips & Techniques
Logic: CoreAudio System Overload Messages
http://support.apple.com/kb/TA24535
Logic: Learn about I/O buffer size and monitoring latency
http://support.apple.com/kb/HT1314
Logic Pro 8 (*probably also for Lo9ic): Tips for balancing multi-core performance
http://support.apple.com/kb/HT3161
Logic Pro 8, Logic Express 8 (*probably also for Lo9ic): Startup modifier keys
http://support.apple.com/kb/TS2047
How to setup Aggregate devices (help, my USB Mic doesn't work):
http://support.apple.com/kb/HT1215
Official Logic Pro 9 PDF manual:
http://documentation.apple.com/en/logicpro/
-click on View as PDF and the PDF will be downloaded.
If it doesn't download, ⌥-clicking on the link might work.
How to make the PDF manual appear in Logics' help menu:
http://discussions.apple.com/message.jspa?messageID=9974746#9974746
Logic Pro/Express 8: Discussion of the Normalize feature in the Bounce dialog
http://support.apple.com/kb/HT2890 (also 9?)
Logic Pro/Express 8: How the EXS24 sampler addresses RAM in Logic 8 (9?)
http://support.apple.com/kb/HT1041
Logic Pro, Logic Express: About compressed audio and track counts (9!)
http://support.apple.com/kb/HT3331
LP8: How to make readable lyrics that follow song
http://discussions.apple.com/message.jspa?messageID=9091728#9091728
Creating Split Stereo files:
http://discussions.apple.com/message.jspa?messageID=7932256#7932256
Performing a loopback test:
http://discussions.apple.com/thread.jspa?threadID=1883662&tstart=0
The novice quick guide to buses:
http://discussions.apple.com/thread.jspa?threadID=2108996&tstart=0
Sidechain Compression using a Bus:
http://discussions.apple.com/message.jspa?messageID=9943631#9943631
How to sidechain an Apple Loop to a Synth (ES2)
http://discussions.apple.com/message.jspa?messageID=9977884#9977884
Side Chain general:
http://discussions.apple.com/thread.jspa?messageID=3927558
http://discussions.apple.com/thread.jspa?messageID=5137845
http://discussions.apple.com/thread.jspa?messageID=5081924
http://discussions.apple.com/thread.jspa?messageID=3007887
http://discussions.apple.com/thread.jspa?messageID=3946575
Side chain filtering:
http://discussions.apple.com/thread.jspa?threadID=1356882
Side chain in Logic instruments:
http://discussions.apple.com/thread.jspa?messageID=6069943
How do I lower my recording level?
http://discussions.apple.com/thread.jspa?threadID=2077388
How to use MIDI Controller Knobs
http://discussions.apple.com/thread.jspa?threadID=1297134
Aligning audio tracks
http://discussions.apple.com/thread.jspa?threadID=1988906
How to split one stereo file into two mono.
http://discussions.apple.com/thread.jspa?threadID=1414557
Off, Read, Latch, Touch, Write
http://discussions.apple.com/thread.jspa?threadID=1996815
How to identify audio file types and formats of regions in Logic
http://support.apple.com/kb/TA25098
Logic: Compress types discussion
http://discussions.apple.com/thread.jspa?threadID=1272696&tstart=0
GarageBand, Logic: Where loops get installed
http://support.apple.com/kb/HT1045
Why level control is important, and hot recording is outdated.
http://discussions.apple.com/thread.jspa?threadID=2114225&tstart=50
How to use multiple keyboards in Logic:
http://discussions.apple.com/thread.jspa?messageID=6929093
How to use arpeggiators in Logic:
http://discussions.apple.com/thread.jspa?messageID=7812007�
Why are my MP3 bounces so loud?
http://discussions.apple.com/thread.jspa?threadID=2047411
Destructive Input processing
http://discussions.apple.com/thread.jspa?messageID=6000085
Compressing during recording
http://discussions.apple.com/thread.jspa?threadID=1260375&tstart=0
How to "Kill Voices" in a stereo track for Karaoke purposes (if you really must...)
http://discussions.apple.com/message.jspa?messageID=10115536#10115536
How to set iTunes to 'neutral' playback
or
"My bounce/mix sounds different when played in iTunes"
http://discussions.apple.com/thread.jspa?threadID=2148955&tstart=0
- Audio General
Final mix too quiet
http://discussions.apple.com/thread.jspa?threadID=1343759
Wikipedia: Audio bit depth
http://en.wikipedia.org/wiki/Audiobitdepth
Get to know your ears (& equipment)
http://audiocheck.net/audiotests_index.php
Very useful utility for checking vital stats
http://ragingmenace.com/software/menumeters/index.html
How to Record an Electric Guitar on Your Mac: Optimizing Your Analog Signal
http://www.apple.com/pro/techniques/connectingguitar/index2.html
---------------------------------------------Bee Jay wrote:
This is a compilation of Logic tips, useful threads and information for Logic Pro users.
- Getting the best help from the Apple Logic Pro Discussions
Remember that many questions, especially if you are new to Logic, have been asked multiple times before, so it's good practice to use the Discussions Search feature in the top right of the page to search for previous discussions relating to your issue.
The search still doesn't work, for anything pre-Snow Leopard... maybe you should omit this tip until it works again...
- General Help, Issues, Errors & Troubleshooting
Okay, here I marked some of the links because at the time it was not clear if they adress things that are still actual in L9.
It may be a good idea to name the topics that apply to all Logics' (7, 8 and 9) simply Logic Pro (or leave 'm nameless), and the others after the specific version they apply to. The topics with a (9?) behind it, have still to be confirmed to also apply to L9 (.0.2)
I used underlining to mark text that can be deleted.
1. Logic Pro _8 (*probably also for Lo9ic)_: Troubleshooting Basics
http://support.apple.com/kb/HT2375
2. Logic Pro, Logic Express: Remove Audio Unit plug-ins to troubleshoot issues (9?)
http://support.apple.com/kb/HT2852
3. Logic Pro, Logic Express: Spinning disc cursor after recording
http://support.apple.com/kb/TA24239
4. Logic Pro/Express 8 - Logic seems to stop responding (hang) while "Searching for Audio Unit plug-ins" when starting up (9?)
http://support.apple.com/kb/TS1086
5. Logic Pro 9 (and all other LS2.0 apps) crashing on startup, other Logic Studio apps as well. Solutions:
http://discussions.apple.com/message.jspa?messageID=9879826#9879826
http://discussions.apple.com/message.jspa?messageID=9907434#9907434
6. Corrupted Plug Ins and a possible solution:
http://discussions.apple.com/thread.jspa?threadID=1912373&tstart=0
7. Delete AU cache - problems with invalidated Plug Ins:
http://discussions.apple.com/thread.jspa?threadID=1856107&tstart=0
...and continue to number like this.
How to open songs from Logic 4 or earlier (L7 + L8 needed)
http://support.apple.com/kb/HT3612
Why do you get 'kernel panics'?
http://discussions.apple.com/message.jspa?messageID=9954472#9954472
Logic Pro 8, Logic Express 8: Cannot select USB mic as an audio input
http://support.apple.com/kb/TS2648
Logic crashes: MelodyneRewireDevice or MelodyneBridge or Rewire need an update.
http://www.celemony.com/userforum/viewtopic.php?p=9807
Logic or GarageBand may quit unexpectedly when starting with Mac OS X 10.5 Leopard if Melodyne is installed
http://support.apple.com/kb/TA25071
Links/RSS feed of all Apple support docs released the past year concerning Logic Studio apps:
http://rss.support.apple.com/logic
Logic Pro/Express 8: Error when bouncing files with normalize checked (9?)
http://support.apple.com/kb/TS1094
Logic Pro/Express 8: Converted Apple Loops play in different key and tempo than expected (9?)
http://support.apple.com/kb/TS1283
Logic Pro/Express: Freeze cursor appearance prevents Audio Instrument track editing (9?)
http://support.apple.com/kb/TA23365
Logic Pro, Logic Express: Instrument not triggered as expected (9!)
http://support.apple.com/kb/TA22915
Moved these together:
Logic Pro 8: Missing content after install:
http://discussions.apple.com/message.jspa?messageID=6602988#6602988
Logic 8: Hybrid Morph missing
http://discussions.apple.com/thread.jspa?messageID=6289860
Logic: Dense clusters of automation nodes can cause audio to stutter
http://support.apple.com/kb/TS2139
Logic 8: Logic only runs when XSkey is connected
http://support.apple.com/kb/TS1106
- General Logic Useful Tips & Techniques
Logic: CoreAudio System Overload Messages
http://support.apple.com/kb/TA24535
Logic: Learn about I/O buffer size and monitoring latency
http://support.apple.com/kb/HT1314
Logic Pro 8 _(*probably also for Lo9ic)_: Tips for balancing multi-core performance
http://support.apple.com/kb/HT3161
Logic Pro 8, Logic Express 8 _(*probably also for Lo9ic)_: Startup modifier keys
http://support.apple.com/kb/TS2047
How to setup Aggregate devices (help, my USB Mic doesn't work):
http://support.apple.com/kb/HT1215
Official Logic Pro 9 PDF manual:
http://documentation.apple.com/en/logicpro/
-click on View as PDF and the PDF will be downloaded.
If it doesn't download, ⌥-clicking on the link might work.
How to make the PDF manual appear in Logics' help menu:
http://discussions.apple.com/message.jspa?messageID=9974746#9974746
Logic Pro/Express 8: Discussion of the Normalize feature in the Bounce dialog
http://support.apple.com/kb/HT2890 _(also 9?)_
Logic Pro/Express 8: How the EXS24 sampler addresses RAM in Logic 8 (9?)
http://support.apple.com/kb/HT1041
Logic Pro, Logic Express: About compressed audio and track counts (9!)
http://support.apple.com/kb/HT3331
(no edits for the rest of the list.)
I like the format, btw, simple and easy to 'scan'. No need to 'pimp' it much more.
Great Job BJ! -
Can logic pro 8 projects be read on logic express 8?
I've posted this on the logic pro forum but thought should post it here too:
So a few weeks ago I went to teach a short one day course in Logic Express 8.... except I've only used Logic Pro 8.....mmmm
Anyway, with all my projects carefully prepared (without space designers or any non- Express 8 plug-ins) I copied my workshop projects onto the students computers only to find that the .logic file was missing. Eek! The iMacs we were using had Logic express 8 (not pro) on them but for some reason the .logic file was now replaced by a folder - which we figured out was actually the opened package of the logic pro file:
The folder was always called Lgdoc containing two files: display state & document data
I've managed to replicate this behaviour on my powerbook which has not got logic 8 installed on it.
Has anyone else come across this? Has anyone opened a logic pro 8 project in Logic express 8 successfully?
Is there a way to re-pack a file whose contents are being shown?
Thanks
RounikOk thanks, so I shouldn't have any problem I guess finish the project with logic9. Do u know by any chance if I can have both 8 and 9 running on my Mac?
-
I am running Logic Pro with 10.6, and after downloading firmware for Digitech piece, I was directed to a security page and promted to download this code resources security patch.Now I cannot open Logic Pro I was promted to download this code resources security patch.Now I cannot open Logic Pro .
You may want to re-post in the Logic Pro forum, my guess is that is a more likely venue to get some help.
Good luck. -
WB 1.6.0 has not updated even though Logic Pro 9.1.1 is installed
I've posted this also on the Logic Pro forum.
My computer refused to update Waveburner 1.6.0 to 1.6.1 even though Logic 9.1.1 is installed - tells me everything is up to date, which it is not!
How do I get it to comply?
Can I somehow uninstall the 9.1.1 update and the reinstall? and how would I do that?
I'm very confused and any help would be greatly appreciated.
I'm away for the weekend so I won't be around to answer questions, sorry...Fixed - see Logic pro forum for answer....
-
New iMacs speed difference with ProTools & Logic Pro
Hi, I am considering upgrading to a new iMac with the 2.93 processor as mine is the white 2.16. Has anyone done so and what speed increases have you noticed with either Protools or Logic Pro? Between the ram upgrade and speed, I would hope for much greater performance. Thanks
HI,
Try posting in the Logic Pro forum. http://discussions.apple.com/forum.jspa?forumID=1201
You could try searching that forum also.
Carolyn -
Logic has been freezing every 20-30 minutes on me. Horrible.
Do I have to UNINSTALL it before REINSTALLING it?
Thanks.Thanks Mucho again. I did trash my Prefs 3 hrs ago and it has not frozen since. But I don't know if I'm out of the woods.
You really think reinstalling is of NO use.
You had mentrioned that Miro is unstable. When I go into recording mode in a month or so should I make sure to NOTR have any Philharmonik plug-ins loaded? In the file I will be recording to?
LOGS (that pertain to Logic):
I don't really know if this is important but I certainly do NOT get what it might mean.
Thanks for hyour help.
8/5/13 12:59:03.451 PM Logic Pro[241]: Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAu dio: no matching architecture in universal wrapper
8/5/13 12:59:03.451 PM Logic Pro[241]: Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x10ed109d0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
8/5/13 12:59:03.627 PM Logic Pro[241]: ApplePersistenceIgnoreState: Existing state will not be touched. New state will be written to /var/folders/_w/q5c_whss1mzdb69zfyd716xh0000gn/T/com.apple.logic.pro.savedState
8/5/13 12:59:14.707 PM coreaudiod[132]: Disabled automatic stack shots because audio IO is active
8/5/13 12:59:20.155 PM MIDIServer[246]: MIDIServer [246] starting; arch=x86_64
8/5/13 12:59:20.678 PM MIDIServer[246]: PlugIn RDUSB0106Midi.plugin -- file://localhost/Library/Audio/MIDI%20Drivers/ does not contain a supported architecture.
8/5/13 12:59:20.679 PM MIDIServer[246]: MIDIServer relaunching because a 32-bit driver was found
8/5/13 12:59:20.706 PM MIDIServer[246]: MIDIServer [246] starting; arch=i386
8/5/13 1:00:27.151 PM Logic Pro[241]: Warning: NSSegmentedCell has unknown NSControlSize 3. This will only be reported once.
8/5/13 1:00:28.302 PM Logic Pro[241]: Could not load Module 'AlphaTrack' (1)
8/5/13 1:39:06.340 PM Logic Pro[352]: Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAu dio: no matching architecture in universal wrapper
8/5/13 1:39:06.340 PM Logic Pro[352]: Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x105805290 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
8/5/13 1:39:06.375 PM Logic Pro[352]: ApplePersistenceIgnoreState: Existing state will not be touched. New state will be written to /var/folders/_w/q5c_whss1mzdb69zfyd716xh0000gn/T/com.apple.logic.pro.savedState
8/5/13 1:39:09.085 PM coreaudiod[132]: Disabled automatic stack shots because audio IO is active
8/5/13 1:39:15.865 PM MIDIServer[357]: MIDIServer [357] starting; arch=x86_64
8/5/13 1:39:15.871 PM MIDIServer[357]: PlugIn RDUSB0106Midi.plugin -- file://localhost/Library/Audio/MIDI%20Drivers/ does not contain a supported architecture.
8/5/13 1:39:15.871 PM MIDIServer[357]: MIDIServer relaunching because a 32-bit driver was found
8/5/13 1:39:15.882 PM MIDIServer[357]: MIDIServer [357] starting; arch=i386
8/5/13 1:40:35.016 PM Logic Pro[352]: Warning: NSSegmentedCell has unknown NSControlSize 3. This will only be reported once.
8/5/13 1:40:35.804 PM Logic Pro[352]: Could not load Module 'AlphaTrack' (1)
8/5/13 1:51:22.701 PM PluginProcess[393]: Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAu dio: no matching architecture in universal wrapper
8/5/13 1:51:22.702 PM PluginProcess[393]: Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x7fcefb3123b0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded) -
I am trying to buy Logic Pro 9 from the app store, but every time I try I get an error
I just bought a brand new MacBook Pro 15" that runs OS X Lion and I am trying to download Logic Pro 9, but when I try to download it all I get is an error window that says "There was an error in the App Store. Please try again later. (100)" I have tried again later. And later again. Still the same thing. My payment does not get processed and the download never starts. I also have no firewalls up or anything else that should be getting in the way. Not really sure what to do and was wondering if anybody is having this problem.
In PC/Mac iTunes left pane select iTunes Store and at the top select music.
Did it help? -
After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBACI downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!) -
Hello, I've recently purchased Logic Pro 9.1.8 from the Appstore on my new MacBook Pro (Mid 2012).
The App installed fine and so did the 2 GB obligatory download on the first launch. But then I downloaded the Logic Pro and Mainstage additional content (4.6
Gb) and then when it started installing, the install window in Logic simply disappeared, I thought it had finished installing, so I checked the Additional content
download menu and it was still unchecked (and without the "Installed" sign on the right). Having copied the package on my external hard drive for backup, I
recopied it on my mac and tried to install, but the installer then displayed the following message: An error occurred while extracting files from the package.
The Log file also included: "The file couldn’t be opened because it isn’t in the correct format."
There isn't an Apple Store in my country.
I'm running on Lion 10.7.5, with 420Gb of free space, please HELP!!!!!!!!Solved this by downloading the file again.
-
Error Message when installing Logic Pro 9
Just tried loading Logic Pro 9 on my new Mac and it gives the following error message:
'You can't use this version of the application Logic Pro with this version on Mac OS X.
You have Logic Pro 9.1.1'
What should I do?Then I can only suggest running these updates (they'll tell you if they're not needed);
Logic Pro 9.1.6 update;
http://support.apple.com/kb/DL1014
Pro Kit 7.0 update;
http://support.apple.com/kb/DL1385 -
Hi all,
This post is the end of a weeks long hair pulling, to save other people the pain of my past week, here is a quick rundown of the issue and the solution that for us at least worked.
All the software is legit and fully updated btw, before people ask.
Logic Pro 9.1.7 on 2010 Imac on 10.6.x, Refx Nexus, Sylenth plus many other VST's and Au's, Mackie Pro + Extender, 2 Midi Keyboards (Oxygen 49 and Alexis 49) and with a M-Audio 410 external soundcard running 10.1.3 driver, all working.. only issue we had was when copying midi between tracks into differing plugins the midi would corrupt the plugin requiring a restart of Logic.
This error we later discovered was due to midi automation for plugins being copied over, but that is not this issue.
Updated OS from 10.6 to 10.7.4 by way of 10.7.4 Combi Update. Removed M-Audio Drivers and then installed 10.7.4,
Installed brand new GRAID 4TB external disk (Raid 0 at 64kb block sixe) and connected M-Audio 410 via daisy chain.
Installed M-Audio Drivers, all ok.. at first..
Graid is 800, M-Audio is 400.. Connected as Imac -> GRaid -> Maudio
At first, its good, no issues.
Copied over a whopping 550GB off Imac onto external.. then later on, rebooted mac and started working on music.
Ran Logic Pro (64bit mode), whilst using Midi with Nexus we discovered the Audio at first was ok, but quickly over time degraded to where the sounds started becoming distorted, the more we went on, the more the distortion increased, after a while the midi notes were just sounding awful.
Rebooted mac
Started using Logic again, not 1 minute in, External drive and M-Audio disconnected themselves from the Mac.
Rebooted
Hard drive now seen, no M-Audio.
Now though, even using Itunes or Quicktime or VLC on any mp3 via internal soundcard, quality was.. well terrible. Within 2 seconds of hitting play, you knew it was bad.
Shutdown, removed external drive from chain, rebooted Mac -> M-Audio
M-Audio now seen, sound quality dreadful, shutdown Mac, rebooted without M-Audio, sound still awful just on Internal audio.
Time passes, I smoke too much, prod and poke and eventually reach for the install media
(Lots of shutdowns and restarts in next bit, after each line, also carefully reset and tested every Audio setting.)
Removed M-Audio driver
Installed 10.7.4
Installed M-Audio
All good again.
Later, as a test, connected External drive on its own, no M-Audio
All good.
Second test, added External Drive plus chain to M-Audio
Not good, M-Audio seen but even though sound bars showing on M-Audio software, no sound out to mixer
Removed External Drive from Chain, M-Audio now straight to Mac.
All BAD; sound was terrible,
Disconnected M-Audio
Playing any Mp3 via internal Audio, terrible..
Whatever happened, has thrown the entire Audio system into a mess, again!.
Removed M-Audio driver.
Reinstalled 10.7.4
Reinstalled M-Audio Driver
All good, on internal or external Audio
Disconnected M-Audio
Reconnected External Drive Only
Drive OK, Internal Sound OK.
Removed External drive
Reconnected M-Audio
All ok, internal or External.
Ok, Final conclusion.
When the M-Audio (400FW) is connected to Mac via External Drive (800) the Audio is knackered from that point onwards on 10.7.4, removing M-Audio drivers and re-installing makes no difference, even the Internal Sound is knackered.
Only solution at this point, remove M-Audio driver, reboot, reinstall 10.7.4, reboot, reinstall M-Audio Driver, reboot.
Then its all good again.
My guess is this, and I am probably wrong but it is all I can think of.
When the M-Audio is daisychained the Mac changes a setting somewhere, probably to adjust for high latency, at this point it is written somewhere (either as a file or as DSP bios setting) that is not being reset.
This is why it is completely broken until 10.7.4 is re-installed at which point whatever setting it is that was changed, is reset.
This is all I can think of, I have posted this so that if someone else in the weeks ahead has a similar issue, it will save you the stress and late nights I had this past week.
Take care all.I was seeing the same problem... I'm a new Logic user, switching from DP, and so it was a minty fresh install of Logic Pro 9.1.7 under ML.
It turned out to be a third party graphics driver that was screwing up some internal process: specifically, the dirver for AirDisplay, an iOS app that lets you use an iPad as a portable monitor. When I removed the driver, the problem cleared up instantly, and I have done 9 hour sessions in Logic since then without a single hiccup.
If you're running a third party driver, remove it, repair permissions and see if the problem clears up. -
Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank youYou can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).
Maybe you are looking for
-
Running Firefox 23.01 on Windows, and two days ago I lost the ability to maximize, minimize or close windows via the buttons in the upper righthand corner. I also am unable to select a choice in dropdown menus, and for good measure I cannot x out of
-
IPV6 settings for OS/X 10.6.8
OK, so Snow Leopard 10.6.8 is supposed to be preparing us for Lion by getting IPV6 right. Up until now, I've left my time capsule with IPV6 set to 'Host', so it takes care of any IPV6 stuff that comes along. As I understand it, what I should now be d
-
"only sync checked items" option grayed out
Note: This is the fifth frakin time I've tried to post this, but this forum site keeps crapping out on me. So, I apologize for any duplicates that might appear. Hey folks, I've successfully upgraded to iTunes v7, and while everything else appears to
-
How to insert or select value d'silva
Hi, How to insert or select value d'silva into/from table. please let me know. Thanks, Sathis.
-
Can i buy once to use on two machines
i have an imac and a macbook pro that i'm trying to get up to date. question is will i have to purchase lion two times? I don't see a bundle available.