Logic Pro issues with input putout

LP 9 Issues . Recently installed snow leopard . Now I'm finding LP9 will not input/output as it shouted .. I get input/output on one session after booting up the computer. When I close that session and open another I get no input/output. So far I've tried trashing the preference and also reseting the computer, neither did not help. Any help.

I get input/output on one session after booting up the computer. When I close that session and open another I get no input/output.
What audio interface are you using? When this problem happens, do you see the interface still selected in Preferences > Audio?
Instead of relaunching Logic, you could try this. Open Preferences > Audio and uncheck "Enabled" (under "Core Audio"). Press the button Apply Changes. Then check Enabled, and Apply Changes again. Does that fix it?
reseting the computer
What does that mean?

Similar Messages

Logic Pro Issues with iSight Camera

I have been working a problem for two months that I thought was a Firewire problem. It started having the problem after installing my new TC Electronic ProwerCore Firewire. I look at everything including LaCie Hard Drives to my RME Firewire 800 IO. Then I stumble on the problem. It was my isight camera. Just plugged in was causing problems.
Problems apeared as IO comunication errors in many different forms and different errors depending on the plugin have the issue.

Impressive hardware collection, DavidSimmons!
We rarely hear about such high-end production equipment here, but Firewire connected and AV devices are always conflict candidates.
Your hardware conflict with iSight make my scanner conflict seem really mundane.
Thanks for sharing your example.
Cheers,
Jim
Note: also posted at http://discussions.apple.com/message.jspa?messageID=4995086 and
http://discussions.apple.com/message.jspa?messageID=4995084

Logic Pro X with OSX Mavericks 10.9.2 Audio output cuts out 3-5 minutes into running software?

Logic Pro X with OSX 10.9.2 Audio output cuts out 3-5 minutes into running software how can I fix this?

Well, first....
Are you using any 3rd party plugins in your project?
If not then my suggestion wont be the cause......
To see which plugins you have installed (Though it's only if they are being actually used in the project that would cause your issue..) you can see them via the Audio Unit Manager found under the Logic Pro X menu bar..... Logic Pro X..... Audio Unit Manager
Also, any reason you are still using 10.9.2 instead of updating to 10.9.5?
Do you get any message when the audio cuts out?
Are you only using internal audio hardware or are you using an external Audio Interface? if so, which one?

Logic pro 9 with akai miniak synthesizer/midi recording audio output!?

I'm using logic pro 9 with my akai miniak/midi. I know how to use the sounds/instruments in logic pro but I want to record "programs/instruments" from my miniak synthesizer keyboard. It shows that Logic receives that info but there is no audio sound when I play it back.

Midi = Data only not Audio
To record Audio from your Akai.... You need to connect audio cables from your Akai's audio outputs to Audio inputs on an audio interface connected to your Mac..

TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
Have a nice day!

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.

Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins, the session opens in the other computer but all the synths reset to presets

Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins (native instruments komplete 7), the session opens in the other computer but all the synths reset to presets, this didnt happen the first time I shared a session, but its been happening lately quite often

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

Logic Pro 9 (9.0.0). Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0. I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

If you bought the boxed set of Logic Studio 2.0 which includes LP9, then you cannot download it. You must use the disks that came as part of the boxed set... to install from.
If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App, Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

Hello! Can i use logic pro x with mbox 2 ?

Hello! Can i use logic pro x with mbox ?

Yes, I´m quite sure you can, go here:
http://avid.force.com/pkb/articles/download/Mbox-2-Drivers
Haven't fully tested it myself, but have a go.

Logic Pro 7 with MOTU 828 or Apogee Ensemble??

I've been using Logic with MOTU's 828MKII interface for about 4 years now. Since couple of days go, the 828 keeps freezing. I had to turn unit off and turn it back on and it starts to work again, but freezes again couple seconds later. I've talked to MOTU guys and they told me to switch voltage back and forth and try again. Same thing.
I finally came to 2 option.
1. Send the unit to MOTU and get it fixed and hope to work with it without anymore problem in the future.
2. Get the new MOTU 828MKIII
3. Get Apogee's Ensemble audio interface. (this one is really pricey for me)
What do you guys think?
Should I just get 828MKii fixed or try new gears..?
I'm a starting film/TV composer/producer and beginning to
do quite large projects.
My set up is
-G5 Quad PowerPC with 2.5GB RAM
-250GB main hardrive, 500GB second internal hardrive
-Yamaha HS50M Speaker
-Yamaha S90ES Synthesizer
-Apple Cinema 23inch
-Running Logic Pro 7 with bunch of samples
and plug-ins in my second internal hard drive.
Share your opinions please.
Thanks
Chris

Motu use to make one of the most reliable drivers in industry. If you're happy with it and can get it fixed... so why not stick with it for a while?
On the other hand the new Apogee's software seems to be really solid and Ensemble's converters are much better than MKII.
So get the 828 fixed, stick with it for a while, save some cash, buy the Ensemble, dump the old 828.
Hope that helps

Logic pro 9 with imac 27" resolution issues

hello,
every time i open logic with my new 27" imac i get a systems requirements pop up that says: Logic Pro recommends a screen resolution of 1024x768 otherwise the software may not function properly. the recommended resolution shrinks the screen size down to like 20-24 inch size screen. this looks like a issue with no immediate solution.
any input would be greatly appreciate
best regards

So always the same problem, maybe from ESX24, I don't know...
When I try to right click on "full strings legato.exs" (in /library/Application Support/Logic/Sampler Instruments/orchestral/full strings legato), and open it with LP9 or Main Stage, it tells me that "the file is corrupted" from MainStage, and "impossible to open the file" from logic...
Thank you again!

Problems with MBOX (first version) with new Logic Pro 9 - only Input 1 work

Hi,
i never had problems with my old MBOX. Since 2 days I switched to Logic Studio 2 and Logic Pro 9. Very nice realease, but: when I create an audio object and choose the inputs in the channel strip for the MBOX, i only get Input 1, no Input 2! When I connect my MBOX in Logic (Audio Preferences) and launch with my started Logic, both Inputs are avaiable and both are working correctly. But never after having started Logic 9...
Any ideas?
I never had this problem with Pro 7 or 8.
Greetz,
Axel
MAC OS X 10.5.8
coreaudioinstaller_v74249904 for MBOX
Mac Book 4GB Intel Dual Core 2.1MHz

Omg.... I't my total memory mistake !! lol
Sorry. Sorry.. Totally wrong post
Really - Logic Remote is only Logic X App....
Shame ... Thanks The Art Of Sound ...
Btw.... May be someone know iPad tool for remotely controlling Logic Pro 9 ? It's need me for recordings - i play on guitar and want remotely control Logic from audio isolated room...

Hi, I'm running Logic Pro 8 with an audiophile sound card. I have my keyboard midi-ed into the sound card and obviously plugged into the computer. I can't get any input into the computer though. Nothing registers when I play. Output is fine. Any help? Tha

Hello,
My midi keyboard isn't registering on Logic Pro 8 and I can't work out why. It's all plugged up correctly. The sound card outputs fine - I can hear what I've previously recorded but can't input any more. Any help gratefully received.
Stephen.

Hi, thanks for reply. I was running Logic Express but upgraded. Now I seem to have problems. I have latest drivers for my audiophile. The operating system is 10.4.11. The keyboard just doesn't seem to register - in or out. I've spent hours on the environment, trying to decide which of the conflicting video tutorials to follow......

Audio recording no longer an option in Logic Pro X with Fast Track Pro

I use the Fast Track Pro, and I haven't changed any settings, but all of a sudden, recording is no longer working. Is this most likely an issue with the Audio Interface?
It was working 2 days ago, and I haven't tweaked any settings or touched anything.

I upgraded to OSX 10.9.1 one week ago, and cannot record audio any longer using my Fast Track Pro with Cubase 7, so I am having the same issues.   My previous OSX version, no problems - audio inputs worked great. I get output sound, but cannot record audio at this point.   I get constant noise spikes, and overloaded peaks.
In System Preferences, when I open the Sound Icon, my Input settings default back to Audio line-in vs. staying fixed on Fast Track Pro.   This is cause for concern, because this tells me that 10.9.1 won't work with any sound card - or at least until Apple decides to fix this.   Whether this is intentional or not from Apple has me wondering, given the move by many manfucturers to lock you in their proprietary equipment.
I think the answer in the short-term is to downgrade back to the previous version 10.8.   I'm going to give it a try. I thought you should know that a non-Logic user is having the same issues and I feel your pain.
Let me know if you get yours working.    Best of luck.

Logic Pro issues with input putout

Similar Messages

Maybe you are looking for