Logic Pro Issues with iSight Camera

I have been working a problem for two months that I thought was a Firewire problem. It started having the problem after installing my new TC Electronic ProwerCore Firewire. I look at everything including LaCie Hard Drives to my RME Firewire 800 IO. Then I stumble on the problem. It was my isight camera. Just plugged in was causing problems.
Problems apeared as IO comunication errors in many different forms and different errors depending on the plugin have the issue.

Impressive hardware collection, DavidSimmons!
We rarely hear about such high-end production equipment here, but Firewire connected and AV devices are always conflict candidates.
Your hardware conflict with iSight make my scanner conflict seem really mundane.
Thanks for sharing your example.
Cheers,
Jim
Note: also posted at http://discussions.apple.com/message.jspa?messageID=4995086 and
http://discussions.apple.com/message.jspa?messageID=4995084

Similar Messages

  • Logic Pro issues with input putout

    LP 9 Issues . Recently installed snow leopard . Now I'm finding LP9 will not input/output as it shouted .. I get input/output on one session after booting up the computer. When I close that session and open another I get no input/output. So far I've tried trashing the preference and also reseting the computer, neither did not help. Any help.

    I get input/output on one session after booting up the computer. When I close that session and open another I get no input/output.
    What audio interface are you using? When this problem happens, do you see the interface still selected in Preferences > Audio?
    Instead of relaunching Logic, you could try this. Open Preferences > Audio and uncheck "Enabled" (under "Core Audio"). Press the button Apply Changes. Then check Enabled, and Apply Changes again. Does that fix it?
    reseting the computer
    What does that mean?

  • Logic Pro X with OSX Mavericks 10.9.2 Audio output cuts out 3-5 minutes into running software?

    Logic Pro X with OSX 10.9.2 Audio output cuts out 3-5 minutes into running software how can I fix this?

    Well, first....
    Are you using any 3rd party plugins in your project?
    If not then my suggestion wont be the cause......
    To see which plugins you have installed (Though it's only if they are being actually used in the project that would cause your issue..) you can see them via the Audio Unit Manager found under the Logic Pro X menu bar..... Logic Pro X..... Audio Unit Manager
    Also, any reason you are still using 10.9.2 instead of updating to 10.9.5?
    Do you get any message when the audio cuts out?
    Are you only using internal audio hardware or are you using an external Audio Interface? if so, which one?

  • I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    If you bought the boxed set of Logic Studio 2.0  which includes LP9, then you cannot  download it. You must use the disks that came as part of the boxed set... to install from.
    If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App,  Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

  • Logic Pro 7 with MOTU 828 or Apogee Ensemble??

    I've been using Logic with MOTU's 828MKII interface for about 4 years now. Since couple of days go, the 828 keeps freezing. I had to turn unit off and turn it back on and it starts to work again, but freezes again couple seconds later. I've talked to MOTU guys and they told me to switch voltage back and forth and try again. Same thing.
    I finally came to 2 option.
    1. Send the unit to MOTU and get it fixed and hope to work with it without anymore problem in the future.
    2. Get the new MOTU 828MKIII
    3. Get Apogee's Ensemble audio interface. (this one is really pricey for me)
    What do you guys think?
    Should I just get 828MKii fixed or try new gears..?
    I'm a starting film/TV composer/producer and beginning to
    do quite large projects.
    My set up is
    -G5 Quad PowerPC with 2.5GB RAM
    -250GB main hardrive, 500GB second internal hardrive
    -Yamaha HS50M Speaker
    -Yamaha S90ES Synthesizer
    -Apple Cinema 23inch
    -Running Logic Pro 7 with bunch of samples
    and plug-ins in my second internal hard drive.
    Share your opinions please.
    Thanks
    Chris

    Motu use to make one of the most reliable drivers in industry. If you're happy with it and can get it fixed... so why not stick with it for a while?
    On the other hand the new Apogee's software seems to be really solid and Ensemble's converters are much better than MKII.
    So get the 828 fixed, stick with it for a while, save some cash, buy the Ensemble, dump the old 828.
    Hope that helps

  • TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

    Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

    Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
    Have a nice day!

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins, the session opens in the other computer but all the synths reset to presets

    Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins (native instruments komplete 7), the session opens in the other computer but all the synths reset to presets, this didnt happen the first time I shared a session, but its been happening lately quite often

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • Logic Pro 9 (9.0.0).   Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0.   I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

  • Hello! Can i use logic pro x with mbox 2 ?

    Hello! Can i use logic pro x with mbox ?

    Yes, I´m quite sure you can, go here:
    http://avid.force.com/pkb/articles/download/Mbox-2-Drivers
    Haven't fully tested it myself, but have a go.

  • Logic pro 9 with akai miniak synthesizer/midi recording audio output!?

    I'm using logic pro 9 with my akai miniak/midi. I know how to use the sounds/instruments in logic pro but I want to record "programs/instruments" from my miniak synthesizer keyboard. It shows that Logic receives that info but there is no audio sound when I play it back.

    Midi = Data only not Audio
    To record Audio from your Akai.... You need to connect audio cables from your Akai's audio outputs to Audio inputs on an audio interface connected to your Mac..

  • Logic pro 9 with imac 27" resolution issues

    hello,
    every time i open logic with my new 27" imac i get a systems requirements pop up that says: Logic Pro recommends a screen resolution of 1024x768 otherwise the software may not function properly. the recommended resolution shrinks the screen size down to like 20-24 inch size screen. this looks like a issue with no immediate solution.
    any input would be greatly appreciate
    best regards

    So always the same problem, maybe from ESX24, I don't know...
    When I try to right click on "full strings legato.exs" (in /library/Application Support/Logic/Sampler Instruments/orchestral/full strings legato), and open it with LP9 or Main Stage, it tells me that "the file is corrupted" from MainStage, and "impossible to open the file" from logic...
    Thank you again!

  • Issue with Apple Camera VendorID_0x106B ProductID_0x1570 green light blinks continually...camera does not work in photo booth or face time

    Green light blinks continually...camera does not work in photo booth or face time.Any suggestions?

    Hi Rogerya,
    Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
    How to Troubleshoot iSight - Apple Support
    https://support.apple.com/en-us/HT2090
    Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    1. See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    2. See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    3. Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    4. Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    - Matt M.

  • Using Logic Pro 9 with Mavericks

    Hi all
    I recently upgraded to Mavericks and when I came to using Logic Pro 8 I found a problem with the tape bar indicator on the arrange window adding black blocks as it moves across the screen. I understand that this is a well known issue. My question is: Will upgrading to Logic 9 solve this? I do not want to upgrade to Logic X so just need to be sure that Logic 9 will solve the problem. many thanks

    While upgrading to Logic Pro 9.1.8 will work with Mavericks, how do you intend to purchase Logic Pro 9 as it is no longer sold by Apple.

  • HOW TO FIX LOGIC PRO CRASHES WITH NEXUS PLUGIN ON MAC OS X 10.6.8 !! =)

    After updating my Mac OS X to 10.6.8, my Logic Pro would always crash when opening a project file that uses the Nexus (version 1) plugin...
    I spent hours upon hours, LONG DAYS AND NIGHTS trying to resolve the issue searching all over the internet for solutions and NOTHING helped besides the suggestion to upgrade to Nexus 2, which was not possible for me, or downgrade my OS X to 10.6.7 ...which wouldve been a very annoying procedure for me...
    SOOOOO....
    I dont know why, but my instincts told me to try this solution, out of hope, and it WORKED!!
    So i felt like it was my duty to help my fellow Logic Pro users/producers with this annoying problem!!
    You can thank me by checking out my music @ FAMEisFAMOUS.com and adding me at:
    -Twitter.com/FAMEisFAMOUS
    -Facebook.com/AiricFame
    HERE'S WHAT YOU DO:
    --GO TO APPLICATIONS
    --AND SIMPLY MOVE (DRAG) THE ReFX FOLDER TO YOUR DESKTOP (OR ANY OTHER FOLDER YOU'D LIKE, AS LONG AS ITS NOT IN YOUR APPLICATIONS FOLDER)
    --NOW OPEN LOGIC PRO AND TRY USING THE NEXUS PLUGIN
    --IT'S GOING TO ASK YOU TO LOCATE THE "0TestTone.nxs" FILE
    --NAVIGATE TO THE LOCATION ON YOUR MAC WHERE YOU MOVED THE REFX FOLDER
    --OPEN THE NEXUS FOLDER / SAMPLES / ROM /
    AND THERE YOU WILL FIND THE "0TestTone.nxs" FILE
    --ONCE YOU APPLY THAT, TRY TESTING THE SOUNDS IN THE PLUGIN AND IT SHOULD BE WORKING FINE!
    --NOW EVERYTIME YOU SAVE, AND REOPEN LOGIC YOU SHOULD BE GOOD TO GO!!
    Hope this works for you like it did for me...
    Much Love!,
    -Airic Fame
    FAMEisFAMOUS.com

    Hi Airic Fame!
    I had just the same problem and tried your way to fix it. WORKED PERFECTLY!!!
    thousend thanks!!!!  you're a Genius!!
    Martin

Maybe you are looking for