Logic pro x, A whole bunch of my audio units failed but worked fine a minute ago
Audio units failed message as half my audio units now will not load.
I have 32 lives and rescanned everything. Did not work.
I own the software and it was all working just fine until I loaded up a different song. Logic glitched out.
The Audio units are still checked in prefs in logic like normal.
Audio units still show up in the project but will no open. They have a question mark. I've seen this before and was able to figure it out with one or two but not half my AU's. Something is different.
I have just loaded the update a week ago and logic was working fine.
I tried deleting my cache with anything Logic x, that did not work.
I restarted the computer several times, no luck.
HALP!!! Thank you for your time
Couldn't be at a worse time as I have a deadline tomorrow for an album I am so close to finishing.. WHY???
If you mean all plugins have this issue then...
In Logic's Prefs Audio/Devices, make sure CoreAudio is checked...
Failing that, or if only some plugins have this issue...
Are the plugins that don't work, all ones wrapped in 32lives?
Do any of Logic's own plugins rather than 3rd party ones, have this problem?
Similar Messages
-
Logic Pro 9 WILL NOT recognise EZdrummer in Audio Units Manager, HELP??
I recently purchased and installed Toontrack's EZdrummer plug-in to work inside Logic Pro.
However, after a week of trying, I for some bizarre reason cannot get Logic to recognize the plug-in/vst.
All week i've conquered the internet looking for solutions but sadly nothing has helped, i've tried everything from trashing cache files to rescanning audio units to manually moving files...STILL NOTHING!
This problem has annoyed many people as I scroll effortlessly down Google looking at other peoples quetions and responses, yet nothing works for me. PLEASE SOMEBODY KNOW HOW TO FIX THIS!Basic Troubleshooting steps...
First of all Logic Pro cannot use VSTs.. It uses AudioUnit (AU) Plugins..
Have you checked the AU Manager (Found under the Logic Pro menu item...) to see if it installed and validated correctly
If it is not there, it did not install correctly in which case reinstall or failing that contact ToonTracks for assistance.
If it is there but not validated, select it and manually recscan it to validate it. If it fails to validated again contact ToonTracks..
if it is there and validated,
When you start a new project in Logic and create a Software Instrument track.. and then you press and hold the Software Instrument button in the track strip.. do you see the ToonTracks entry? (along with all the Logic Pro's plugins and other 3rd party AU Plugins you may have installed)
The Software Instrument button is located as shown in this screenshot.. -
I've researched this extensively, but I haven't been able to solve my problem yet.
It started completely out of the blue with a kernel panic, where my screen seemed to malfunction and I got the kernel panic message (but I could hardly read it because of distorted graphics). I forced my laptop to shut down, but every time I rebooted and used it again it would completely freeze after a while (the amount of time varied, it has lasted from a few seconds to a couple of hours). What happens essentially is that the cursor and entire OS freezes, and I'm unable to click on anything or use the keyboard. The fans start working full speed and the only thing I can do is force the laptop to shut down.
At first I thought it was a Chrome problem because it only happened after I opened the browser. After uninstalling it, the laptop seemed to work fine for a couple of hours, but then it froze again while I was using Safari. Ever since it has been functioning normally for smaller and smaller time periods before freezing again. I've tried reinstalling Snow Leopard OS from the original disc and then downloading all software updates, but the problem continues. I've also tried doing a hardware test by pressing D as the computer starts up, but for some reason it doesn't work.
The laptop, including Chrome and Safari, works fine in safe mode.
I'm sorry I don't know what specific information to give you about my laptop/OS, but please ask anything you need to know. I'd greatly appreciate any help — I'm panicking because I fly to England tomorrow morning to start university and I really don't want to go without a laptop for 2 weeks while it's getting fixed!Thanks for your reply! Here are the Etrecheck results.
Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6490M - VRAM: 256 MB
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:51:36
Disk Information:
ST9500325ASG disk0 : (465.76 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) /: 465.44 GB (339.98 GB free)
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple, Inc. MacBook Pro
Kernel Extensions:
Problem System Launch Daemons:
[not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
[failed] com.apple.Kerberos.renew.plist
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.google.keystone.daemon.plist
[not loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[not loaded] com.divx.dms.agent.plist
[not loaded] com.divx.update.agent.plist
[not loaded] com.google.keystone.agent.plist
[not loaded] com.hp.devicemonitor.plist
[not loaded] com.hp.messagecenter.launcher.plist
[not loaded] com.quark.quarkupdate.agent.plist
[not loaded] net.culater.SIMBL.Agent.plist
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[not loaded] com.facebook.videochat.elenicourea.plist
[not loaded] com.spotify.webhelper.plist
[not loaded] net.infinite-labs.SIMBLEnablerForSandboxedApps.plist
User Login Items:
Flux
GrowlHelperApp
iTunesHelper
Flux
The Lion King Circle of Life.mp3
Dropbox
3rd Party Preference Panes:
Flash Player
Flip4Mac WMV
Perian
Internet Plug-ins:
AdobeAAMDetect.plugin
DirectorShockwave.plugin
DivX Web Player.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
OVSHelper.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Picasa.plugin
Bad Fonts:
None
Top Processes by CPU:
44% Google Chrome
28% WindowServer
10% EtreCheck
7% syslogd
2% hidd
2% Bluetooth File Exchange
1% fontd
0% Finder
0% SystemUIServer
0% JavaApplicationStub
Top Processes by Memory:
210 MB Google Chrome
111 MB JavaApplicationStub
57 MB Finder
49 MB Dock
42 MB Google Chrome Helper
41 MB SystemUIServer
41 MB WindowServer
41 MB Bluetooth File Exchange
41 MB quicklookd
41 MB EtreCheck
Virtual Memory Statistics
382 MB Free RAM
1.01 GB Active RAM
518 MB Inactive RAM
2.10 GB Wired RAM
461 MB Page-ins
364 KB Page-outs -
APPLE TECH TEAM SUGGESTED TO REPLACE MY MACBOOK PRO'S LOGIC BOARD FOR 2ND TIME?All the funtionality and applications is working fine but my screen backlight is off.If i expose it to direct sunlight , i can see what is running on my MAC(out of warranty)
likely display inverter board.
did you get your inverter board replaced already?
Did you have a question?
If the diagnostic in shop indicates same, thats 1000X better than anyone can do online in "diagnosis" (not really genuine diagnosis of course) -
How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook. The all icloud is checked on my phone and the enable icloud account and push are selected on the Macbook.
ThanksDo the events from your iPhone calendar appear on icloud.com? If not, go to Settings>Mail,Contacts,Calendars>Default Calendar (in the Calendars section) and make sure you have selected an iCloud calendar as your default. If you haven't, make this change, then add a new event on your iPhone calendar and see if appears on icloud.com and your Mac now.
-
Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still crashes. Anybody else experience this? email:[email protected]
Hi bigd_bud,
Can you see if the solutions in this post help?
Re: Adobe Extension Manager crashes on mac 10.8
Thanks,
Preran -
I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings
OK, but in my ipad, the apple id i have in itues is already the one iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!
-
i am getting "unexpected error opening catalog" message when opening a catalog that worked fine 2 days ago. Other catalogs open on the same drive Mac pro LR5.3 please help.... Lots of worked had gone into that catalog
thanks
karlHmm, that is more of a problem!
Ok, couple of initial things to try:
1. Move the catalog to another drive, and try opening it from there. It's a long shot...
2. Create a new catalog and go to File menu > Import from Another Catalog. Navigate to the problem catalog and try to import a small chunk at a time. -
Logic pro 9 quit unexpectedly while initializing Core audio
i've installed my logic studio 9 and it does not work, it quits unexpectedly while initializing Core audio I am using mbox 2 mini but i don't like protools, i deleted it. I've installed the digidesign standalone core audio drivers 8.0.3 which is compatible with my OS, but logic pro doesnt launch, soundtrack pro works and waveburner does too, mainstage and logic pro do not. I've configurated system preferences/sounds and mbox2 mini appears right. I've configurated applications/utilities/audio midi setup and everything is correct , system preferences/ mbox2 says "connected to mbox 2 mini" so if everything is correct why it doesnt work in logic pro and with soundtrack works perfectly? OMG it drives me nuts already... i tried also run logic pro without audio interface, just with "built in" device. it didn't work too. i launched it pressing control(without launch core audio) in audio settings appears mbox2 mini but doesnt work. I did read in a forum "you should delete logic's preference file" .... didn't work too.... like i said can't deal anymore with this issue. please HELP!!
i've installed my logic studio 9 and it does not work, it quits unexpectedly while initializing Core audio I am using mbox 2 mini but i don't like protools, i deleted it. I've installed the digidesign standalone core audio drivers 8.0.3 which is compatible with my OS, but logic pro doesnt launch, soundtrack pro works and waveburner does too, mainstage and logic pro do not. I've configurated system preferences/sounds and mbox2 mini appears right. I've configurated applications/utilities/audio midi setup and everything is correct , system preferences/ mbox2 says "connected to mbox 2 mini" so if everything is correct why it doesnt work in logic pro and with soundtrack works perfectly? OMG it drives me nuts already... i tried also run logic pro without audio interface, just with "built in" device. it didn't work too. i launched it pressing control(without launch core audio) in audio settings appears mbox2 mini but doesnt work. I did read in a forum "you should delete logic's preference file" .... didn't work too.... like i said can't deal anymore with this issue. please HELP!!
-
Logic pro x native instrument issue: the vintage B3 organ doesn't work at all!
I installed logic pro x, and the vintage B3 organ doesn't work at all! Oddest thing? Help?
Yes, the little blue power "button" is pressed in the window for the organ.
Yes, my other instruments seem to be working just fine...OK, I solved my problem - I don't know why I didn't see the other responses on this earlier. Turns out the midi output has to be set to channel 1....
-
Why is logic pro only showing 8 inputs with core audio?
I use Logic Pro and Pro Tools HD TDM and I have 2 audio interfaces with a total of 20 analog inputs. It seems that in Logic, I can only access 8 inputs. I suspect this has something to do with core audio and logic but there has to be a way around this that allows me to use all 20 inputs right? Any help would be greatly appreciated.
Too bad you're not running an earlier version of Pro Tools, prior to 8.03 or you could use your system under DAE and have access to the HD system in Logic, or at least in some versions of Logic 9.
http://avid.force.com/pkb/articles/en_US/Compatibility/en363063
You will be limited to 8 ins under core audio as I recall... this is due to Avid's core audio driver.
Here's more about HD support.
http://documentation.apple.com/en/logicpro/tdmguide/index.html#chapter=preface%2 6section=1%26tasks=true -
Logic Pro X 10.1.1. and OSX 10.9.5. not working?
Only today I installed the new update of logic pro x (10.1.1.) and it stopped working?
It takes up to several minutes to open a session, sometimes it doesn't open at all ("not responding") and you have to force quit the application.
Until yesterday it worked fine (I run it on an iMac 2,9 GHz Intel Core i5, 8GB memory, OSX 10.9.5.).
My euphonix mc control stopped working as well, but apparently the new logic update is not compatible with it.
Has anyone else experienced similar problems?The issue is going to be caused by your Eucon drivers still... as that will trip up Logic's startup...
However, you might find some helpful tips in the following thread..
LP X 10.1 incompatible with EuCon controllers. -
Logic pro 9,record ready has gone for audio tracks,can't record now.
I upgraded from Logic 8 to logic pro 9 back in october,everything was fine no probs.I have come back to record after a month away & now there is no record ready for audio tracks on any page,they're there for instruments & midi tracks.All else seems fine - just can't record! Also is there any way of getting help from apple,can't see anywhere to contact them without paying!! can anyone help with this?,tis the season of frustration....
You have to select an Input device in the Audio preferences. Since Logic 9 you can assign different devices for In- and Output. So make a selection there and everything will be fine.
-
Premiere pro crashes on playback but works fine in safe mode
hey i installed premiere cs5 and updated with the latest update and when i playback footage the program crashes, i've tried safe mode and the program works fine & the video does wonderful and i can edit no problem, but of course there'e no sound so i can't edit like that, any suggestions?
System specs: windows 7 professional 64 bit
processor: intel(R) core(TM) i7 cpu 860 @ 2.80GHz 2.79 GHz
intalled ram: 8 GB
op sys: 64 bit
i get this
problem event name: APPCRASH
application name: adobe premiere pro.exe
application version: 5.0.1.0
application timestamp: 4bf119d2
fault module name: display.dll
and the list goes on...
if anybody has a fix please let me know thanksHave you updated your video driver? If not, that could well be the issue. Go to the nVidia, or ATI Web site, and get the latest version for your video card.
Now, something else to consider is that during boot up, something is loading, that is getting in the way. This ARTICLE will give you tips. In Safe Mode, those problem programs and processes are not loaded.
Good luck,
Hunt -
My MacBook Pro (mid-2010) suddenly stopped working when I was overseas, but I managed to fix it when I returned back to the States after I reformatted and erased the disk, then installed Yosemite. I lost most of my files but didn't really care, though I noticed that some pictures from iPhoto had survived and were in the Trash folder.
I thought I could copy/paste them back into iPhoto, but it wouldn't let me since they were still in the trash. I started getting an error message for EACH PICTURE saying it couldn't be copied because it was in the trash, and when I realized that I'd have to click "ok" 644 times (once for each picture), I tried to restart, then shut down, and eventually forced a shut down by holding down the power button. This is where the problem started...
After trying to startup again, I was able to login to my admin account, and the desktop image would load, but I'd get the spinning rainbow wheel and the computer would remain frozen like that from then on. I tried to repair the disk (there was nothing wrong), and even re-installed the operating system again, but still the problem persists. BUT, if I login with my guest account, everything works fine.
I'm guessing it has something to do with it somehow being frozen on those error messages for those 600+ pictures, but I have no idea how to fix/unfreeze it. Any tips or suggestions?mozak wrote:
Can the use of SATA3 instead of SATA2 hdd lead to some issues with my macbook?
I can try to find and buy new SATA2 sdd hdd but they are expensive and I'm not sure it will fix the restarting issue.
SATA3 is backwards compatible with SATA2. That is not likely to be your problem.
Based on what you have done, I suggest a reinstall of the OSX.
Ciao.
Maybe you are looking for
-
How do you return to the thunderbird main window in linux when it opens in a local folder?
I can find no option to return to the main window of Thunderbird 31.1.1 under Fedora 20. It always opens in the same local folder (the only tab displayed under "File Edit View .. " menu bar) that I was reading before yesterday's "logoff.". I tried re
-
Cannot install latest Firefox update. Seems to download OK but that's it!
Frequently receive prompts to download/install the latest update. Click to download and it appears to work. Never installs the update. I've restarted/rebooted/downloaded the upgrade several times. Nothing works! Any thoughts?
-
Any example for ENQUEUE_ARRAY for JMS compatible messages?
Is there any examples of using ENQUEUE_ARRAY with messages that are compatible with JMS? either a VARRAY or NESTED TABLE of JMS content? I have an after insert trigger that propagates to JMS and in the for each row loop I'd much rather enqueue as a b
-
Regarding outbound delivery VL02n and vl01n
Hi all i need a user exit which trigrred after saving the deivery data after PGI my requirement is to create a billing document using a bapi while doing the PGI. if the user press PGI in back ground we must create a billing document from VL01N now i
-
anyone can help with this i was wondering if apple care can fix the iphone 5 cause today wasnt my day wen i was on ferry back to the city a big wave hit the ferry and i got all wet and now the phone wont turn on or charge with no sound i wanna know