Logic Pro X - Cannot see multiple input options

Hello,
I've been using other DAWs(DP and Studio One 2) but I decided to try Logic Pro X and purchased it yesterday.
I'm using a firewire audio interface which has multiple input options. For example, Ch1 and Ch2 are for mic inputs, ch3 and ch4 are for my external sound module (Yamaha Motif Rack), etc.
I tried to play and record the sound module on Logic, I first added "New External Midi Track". Then, I added "New Audio Track" to record the sound of sound module, like I do on other DAWs. I tried to select the ch 3-4 as an input for the audio track, however I could only see the input ch1-2 as an option for the track.
The audio interface's driver is installed correctly. In fact, I can use the input ch 3-4 with no problem on other DAWs.
Since I'm new to Logic Pro, I might have overlooked how to assign / setup the inputs.
Can anybody let me know how I can activate input ch3-4 on Logic Pro X?
Thanks in advance.
-Holly

Yeah, after I wrote the post, I found out that this happened because "built-in input" was chosen as a default input source on "Preferences -> Audio". That's why it only showed ch1-2. Now I chose my audio interface as the default input and I could see other channels.
That's good, however this brought up a new question, if I want to use multiple input options such as two audio interfaces or combination of built-in input and an audio interface, is it possible to do so?

Similar Messages

How do I get Logic Pro X to see my USB audio interface Steinberg UR22? It saw it once before but now it doesn't.

How do I get Logic Pro X to see my USB audio interface Steinberg UR22? It saw it once before but now it doesn't. In preferences it doesn't appear as an input device option. Help!

First, go to System Preferences for OS X and verify that the operating system can see it.

I cannot see all preferences options

Hello
I'm new to flash pro CC but I've already worked in flash...
I'm animating a sequence and would like to activate the span based selection but I cannot see all the options in the preferences menu.
How can I get to see all the options in the preferences menu?
(sorry if there are some mistakes I'm french)

Hi Brice,
Which version of DW are you using? Which OS? Have you experienced this issue before or is this your first encounter?
As a first step, I suggest you try recreating Preferences (Re-create preferences) and see if that helps.
Thanks,
Preran

Cannot See Multiple Cover Art Anymore

Cannot see multiple cover artwork since I upgraded to iTunes 10.5.1. I used to be able to see more then one art cover for a song. Now there's no arrow button in the artwork box to scroll through other covers, even though the multiple cover art is in the info box of the song Track.

iTunes 10.6 did not restore the scroll arrows in the art work box either. The scroll arrows appear briefly when you
add additional art work. I wish Apple would say whether or not they plan to restore this feature. I have invested a l
lot of time and effort in adding cover art and liner notes to my iTunes library and I am certainly not the only
one who has. I don't understand the lack of a fix or the silence about the loss of this feature. Anyone out there
have any thoughs about this?
---David Cantrell
<Email Edited by Host>

I have problem in osx 10.8 i cannot see the encoding option while connecting to the my pc server ?

MR.Eric please help ?
i have problem in osx 10.8 i cannot see the encoding option while connecting to the my pc server ?
this option was in osx 10.6 see it here
because if i create any file in Arabic name from osx 10.8 the others old mac os see it only in unreadable letters ?
please help
thanks

Aw geez, they sure have messed up OSX.
Do you have a backup of 10.8.2?
Maybe...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Cannot see the printer options or preferences page

Hi,
We have a number of computers that cannot see the printer options or the preferences page options. See the print screen below to see what i mean...
I've reinstalled adober reader X, with no luck.
Has anyone else had the same issue?
Cheers

Hi, unfortunately, I have the same problem: After installing Adobe Reader 10.1 on my MacBook 3,1 OS 10.6.8, printing pdf-files is impossible as the printer options / preference page is not shown anymore. I have reinstalled AR 10.1, I have reinstalled Snow Leopard, I have reinstalled AR 10.1 without success. Only once, there was a hint by AR: "internal problem, lack of ressource file". Other files (preview, MS word, etc.) print without problems. I would be glad to receive a hint how to solve this problem.

Logic Pro 9 Midi Problems Multiple Devices

Hello, im having issues with using multiple external devices in Logic Pro 9. I have a virus TI 2 and a prophet hooked up to a Saffire Pro 40 audio card which I am using the Midi Hub.
Basically, If I have an external instrument (prophet) playing on a track I have to turn the virus off or else there is midi problems communicating with the prophet 08.
The Biggest issue i'm having here is that when the midi data in the external instrument track is playing, if I'm selected on the track while its playing, I get an extreme cluster #$)* of midi on the midi input display and it completely and utterly destroys what the prophet is trying to play into logic.
In my Midi setup on Mac Snow Leopard, I have the ins and outs of the prophet going to the saffire pro 40. The virus is connected and playing midi via USB.
Anyone know how I should be setting this up so the midi information is not getting messed up? Yes, I have consulted the user manuals.

Not: My ZED R Mixer connected FireWire 400 800 cable with iMac

MB Pro CD2 cannot see LW 320 via AsantéTalk

I have an old LW320 that is available to six computers on the ET network without problem. My new MB Pro cannot see the LW320 directly, only as a shared printer. Tried switching AppleTalk on/off, new user account, connecting directly to AsantéTalk rather than via hub/Airport etc, running all the options in Printer Setup Repair, even the old favourite of repairing permissions. No go. I have not yet done an archive and install. Any ideas, please?
MB Pro CD2, 5 other Macs Mac OS X (10.4.8)

I am sorry if I have offended you in some fashion. It was certainly not intentional.
Your flip response did not indicate whether you have, in fact, opened the Directory Access Utility. This is not the same as turning AppleTalk on and off using the Network preference pane. If you have not already done used the Directory Access utility, I recommend it highly.

Logic Pro 9 not seeing Avid Artist Mix

Hi Guys,
I've never posted in a forum before but I'm having some major trouble with getting my Avid Artist Mix Controller and Logic Pro 9 to communicate with each other. I've tried all sorts of things, set up a static IP address for the mix and computer, trying different start up combinations, uninstalling and re-installing Eucontrol and nothing seems to be working, this controller just sits on my desk displaying nothing and doing absolutely nothing. Here's what I've found so far in regards to it's behavior:
The Artist Mix IS connected to my computer, everything in my Network Preferences is green and when I open Eucontrol it's listed under My Surfaces as MC Mix. My computer is listed under work stations. Upon device start up the Artist Mix displays the Avid logo, however when Eucontrol starts up and connects the display on the Artist Mix goes dark. Upon opening Logic I see "Starting up Eucon Support" on the splash screen but then once it's open the Artist Mix DOES NOT do anything. When searching for the Euphonix or Avid devices in Logic's "Control Surfaces" Preference window I see a list of multiple different control surfaces (i.e. Mackie, Yamaha, etc) but no Euphonix or Avid devices. Also, I can open Eucontrol settings just fine before starting up Logic, however post Logic start up results in Eucontrol freezing and requiring a Force Quit, even after I've quit Logic. If anyone has any light to shine on this subject it would be infinitely appreciated. I've spent the past three days scouring the interenet for answers with zero success, Trying to get a hold of Avid Support which seems impossible (and expensive), and trying a bunch of "hunch" or "mildly informed" remedies of my own and nothing seems to be working. So far, I just have an incredibly expensive paperweight.
Here are my specs:
Computer:
Late 2011 Macbook Pro 13" 2.4 GHZ Intel Core I5
8 GB RAM
Running OSX 10.9.2
Eucontrol:
Eucontrol Version 3.1.0
Artist Mix:
Firmware up to date 1.5.2
Logic Pro:
Logic Pro Version 9.1.8

bigpego wrote:
I have the same problem with Logic 10.0.7 OSX 10.8 and eucon 3.1.3. It doesn't work and I have test some combination startup. There are some news? Thank you very much
This solution posted above, seems to work very well... if you follow them exactly as stated.
I use artist mix in Logic Pro X and works fine, BUT I did have some initial problems. Firstly use latest eucon software. Then turn app nap off on the eucon application icon, after that, I switch mc mix on first, then mac, let it do it's stuff, then run eucon ( not auto load eucon). When eucon recognises mc mix, then load Logic Pro x.
Cheers..
Nigel

Logic Pro 9 cannot be installed on Maverick?

Hi,
I just bought an iMac27 and tried to install Logic Pro 9 which I bought many years ago.
After spending a couple of hours installing, at the endm, it said Logic 9.0.0 cannot be used with this version of OS X.
What options do I have?
Do I need to buy the latest Logic Pro again? Can I trade in the old one and update?
I hope not to spend more money again...
Please let me know any solutions.
Thank you very much.

Go to the menu bar at the top of any screen
Click on the Apple in the top left hand corner
Select software updates from the drop down menu
Update Logic Pro

Logic Pro X not seeing any loops Garage band does!!

Need help in directing Logic Pro to see and list loops...tried re indexing...uninstall and reinstall program....updates....about at the end for Logic pro...but I hate to give up!....any Help? Thanks
Forrest S

Okay.. try this..
Download FindAnyFile (FAF) from here...
http://apps.tempel.org/FindAnyFile/
Now search for this...
Southern Rock Piano 13
Make sure you type the file name exactly as above...
if it finds the file...
Please type out the path to that file that FAF shows at the bottom of it's report window...
Also, if it finds more than one copy of that file, please type out the paths for any copy...

Logic Pro 9 - MOTU MK II inputs not available in channel strip

I usually use a MOTU 24 i/o as my main Logic Pro 9.1.5 audio interface. I'm trying to use a MOTU MK II and it is connected via firewire. It shows up fine in the Logic > Audio > core audio driver preference and is checked on. However the MKII in/outs are not available on Logic's channel strip inputs and outputs. Logic still shows the 24 i/o's even though the 24 i/o is not selected in audio preferences and is not even turned on.
I've reinstalled the latest MOTU drivers, trashed Logic's preferences and restarted my MacPro but it is still the same. Only the 24 i/o available in the channel strip input and output.
Is there a second audio i/o setting that I'm missing?
My Mic is registering OK in the MKII so I know it is getting a signal.
Thanks,
Richard

For some reason Logic is listing the 24 i/o inputs.
I've renamed the 828 Mk2 1 & 2 inputs to Vox 1 and Vox 2. The MK2 has 8 analog inputs plus two mic/line inputs for a total of ten audio inputs, not 14 as listed in the channel strip input drop down.
Audio registers in and out of the Mk2 but does not register in Logic's channel strip input. I just switched back to the 24 i/o to test and audio registers fine in Logic's channel strip input with the 24 i/o. Just not with the MK2 selected as the audio source.
I'm curious if anyone else has had this problem or if I'm missing an audio input setting somewhere.
Thanks,
Richard

Logic Pro 9 cannot set up external midi (Roland Juno G)

I am using Logic Pro 9 and can't seem to set up the external midi. I have a Roland Juno G which is working as a midi controller perfectly but I cannot send sound within the keyboard to Logic. I have set up everything on the keyboard side but I'm having difficulty setting it up in Logic. I don't want to just use it as a midi controller as I want to use some of the internal sounds as well. PLEASE HELP........!

Start here:
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=10%26tasks=true
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=9%26sec tion=4%26tasks=true

On my Mac pro I cannot see my iTunes library in my slideshow as a music selection

I cannot see my iTunes library in iPhoto to add music to a slideshow

Hi Mary3400,
I'm not sure which version of iPhoto you are using, but see if the troubleshooting in this article helps.
iPhoto '11: Add music to a slideshow
The top section explains how to, the second section is for if you don't see your iTunes library as a source.
Best regards,
Nubz

Cannot see the delta option in update tab for info package

Hi,
I need to create 3 info packages for a data source.
When I right click and pick create infopackage and go to the update tab to choose delta, I see only full and initialize...
Can someone let me know why, and what should I do to see the delta option for my infopackage.
Thanks

hello radha
oka pani cheyyi....
I mean you may try this following procedure for this error.
Search the init IP
1.     Double click in the IP
2.     Scheduler menu
3.     Click in Initialization options for source system
Select and delete the only entry ( INIT) .
Now go to Source systems -
> right click your source system----> replicate.
Activate your transfer rules, using program RS_TRANSTRU_ACTIVATE_ALL
now try to perform Init again.
It will work.
Cheers!!!!

Logic Pro X - Cannot see multiple input options

Similar Messages

Maybe you are looking for